This commit is contained in:
cyberman54 2021-02-02 23:23:25 +01:00
commit b2931c148d
40 changed files with 936 additions and 427 deletions

View File

@ -13,6 +13,8 @@ Tutorial (in german language): https://www.heise.de/select/make/2019/1/155109923
<img src="img/TTGO-curves.jpg"> <img src="img/TTGO-curves.jpg">
<img src="img/Paxcounter-LEDmatrix.jpg"> <img src="img/Paxcounter-LEDmatrix.jpg">
<img src="img/Paxcounter-Clock.png"> <img src="img/Paxcounter-Clock.png">
<img src="img/Paxcounter-ttgo-twristband.jpg">
# Use case # Use case
@ -47,9 +49,13 @@ LoLin32lite + [LoraNode32-Lite shield](https://github.com/hallard/LoLin32-Lite-L
- WeMos: LoLin32, LoLin32 Lite, WeMos D32, [Wemos32 Oled](https://www.instructables.com/id/ESP32-With-Integrated-OLED-WEMOSLolin-Getting-Star/) - WeMos: LoLin32, LoLin32 Lite, WeMos D32, [Wemos32 Oled](https://www.instructables.com/id/ESP32-With-Integrated-OLED-WEMOSLolin-Getting-Star/)
- Crowdsupply: [TinyPICO](https://www.crowdsupply.com/unexpected-maker/tinypico) - Crowdsupply: [TinyPICO](https://www.crowdsupply.com/unexpected-maker/tinypico)
- TTGO: [T-Display](https://www.aliexpress.com/item/33048962331.html) - TTGO: [T-Display](https://www.aliexpress.com/item/33048962331.html)
- TTGO: [T-Wristband](https://www.aliexpress.com/item/4000527495064.html)
- Generic ESP32 - Generic ESP32
Depending on board hardware following features are supported: Depending on board hardware following features are supported:
- LoRaWAN communication, supporting various payload formats (see enclosed .js converters)
- MQTT communication via TCP/IP and Ethernet interface (note: payload transmitted over MQTT will be base64 encoded)
- SPI serial communication to a local host
- LED (shows power & status) - LED (shows power & status)
- OLED Display (shows detailed status) - OLED Display (shows detailed status)
- RGB LED (shows colorized status) - RGB LED (shows colorized status)
@ -62,7 +68,6 @@ Depending on board hardware following features are supported:
- Switch external power / battery - Switch external power / battery
- LED Matrix display (similar to [this 64x16 model](https://www.instructables.com/id/64x16-RED-LED-Marquee/), can be ordered on [Aliexpress](https://www.aliexpress.com/item/P3-75-dot-matrix-led-module-3-75mm-high-clear-top1-for-text-display-304-60mm/32616683948.html)) - LED Matrix display (similar to [this 64x16 model](https://www.instructables.com/id/64x16-RED-LED-Marquee/), can be ordered on [Aliexpress](https://www.aliexpress.com/item/P3-75-dot-matrix-led-module-3-75mm-high-clear-top1-for-text-display-304-60mm/32616683948.html))
- SD-card (see section SD-card here) for logging pax data - SD-card (see section SD-card here) for logging pax data
- Ethernet interface for MQTT communication via TCP/IP
Target platform must be selected in `platformio.ini`.<br> Target platform must be selected in `platformio.ini`.<br>
Hardware dependent settings (pinout etc.) are stored in board files in /hal directory. If you want to use a ESP32 board which is not yet supported, use hal file generic.h and tailor pin mappings to your needs. Pull requests for new boards welcome.<br> Hardware dependent settings (pinout etc.) are stored in board files in /hal directory. If you want to use a ESP32 board which is not yet supported, use hal file generic.h and tailor pin mappings to your needs. Pull requests for new boards welcome.<br>
@ -198,7 +203,7 @@ Paxcounter supports a battery friendly power saving mode. In this mode the devic
# Time sync # Time sync
Paxcounter can keep it's time-of-day synced with an external time source. Set *#define TIME_SYNC_INTERVAL* in paxcounter.conf to enable time sync. Supported external time sources are GPS, LORAWAN network time and LORAWAN application timeserver time. An on board DS3231 RTC is kept sycned as fallback time source. Time accuracy depends on board's time base which generates the pulse per second. Supported are GPS PPS, SQW output of RTC, and internal ESP32 hardware timer. Time base is selected by #defines in the board's hal file, see example in [**generic.h**](src/hal/generic.h). Bonus: If your LORAWAN network does not support network time, you can run a Node-Red timeserver application using the enclosed [**Timeserver code**](/src/Timeserver/Nodered-Timeserver.json). Configure MQTT nodes in Node-Red to the same LORAWAN application as paxocunter device is using. Paxcounter can keep it's time-of-day synced with an external time source. Set *#define TIME_SYNC_INTERVAL* in paxcounter.conf to enable time sync. Supported external time sources are GPS, LORAWAN network time and LORAWAN application timeserver time. An on board DS3231 RTC is kept sycned as fallback time source. Time accuracy depends on board's time base which generates the pulse per second. Supported are GPS PPS, SQW output of RTC, and internal ESP32 hardware timer. Time base is selected by #defines in the board's hal file, see example in [**generic.h**](src/hal/generic.h). Bonus: If your LORAWAN network does not support network time, you can run a Node-Red timeserver application using the enclosed [**Timeserver code**](/src/Node-RED/Timeserver.json). Configure MQTT nodes in Node-Red for the LORAWAN application used by paxocunter device.
# Wall clock controller # Wall clock controller
@ -362,9 +367,9 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
# Remote control # Remote control
The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them. The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them, but must not exceed a maximum of 10 bytes per downlink.
Note: all settings are stored in NVRAM and will be reloaded when device starts. Note: settings can be stored in NVRAM to make them persistant (reloaded during device startup / restart). To store settings, use command 0x20.
Send for example `8386` as Downlink on Port 2 to get battery status and time/date from the device. Send for example `8386` as Downlink on Port 2 to get battery status and time/date from the device.
<img src="img/paxcounter_downlink_example.png"> <img src="img/paxcounter_downlink_example.png">
@ -523,6 +528,14 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
0 ... 255 device sleep cycle in seconds/2 0 ... 255 device sleep cycle in seconds/2
e.g. 120 -> device sleeps 240 seconds after each send cycle [default = 0] e.g. 120 -> device sleeps 240 seconds after each send cycle [default = 0]
0x20 store device configuration
Current device runtime configuration is stored in NVRAM, will be reloaded after restart
0x21 load device configuration
Current device runtime configuration will be loaded from NVRAM, replacing current settings immediately (use with care!)
0x80 get device configuration 0x80 get device configuration
Device answers with it's current configuration on Port 3. Device answers with it's current configuration on Port 3.

Binary file not shown.

After

Width:  |  Height:  |  Size: 229 KiB

View File

@ -10,6 +10,7 @@
#include "display.h" #include "display.h"
#include "sds011read.h" #include "sds011read.h"
#include "sdcard.h" #include "sdcard.h"
#include "macsniff.h"
extern Ticker cyclicTimer; extern Ticker cyclicTimer;

View File

@ -22,24 +22,14 @@
#define _bitl(b) (1UL << (b)) #define _bitl(b) (1UL << (b))
// bits in payloadmask for filtering payload data // bits in payloadmask for filtering payload data
#define COUNT_DATA _bit(1) #define COUNT_DATA _bit(0)
#define ALARM_DATA _bit(2) #define ALARM_DATA _bit(1)
#define MEMS_DATA _bit(3) #define MEMS_DATA _bit(2)
#define GPS_DATA _bit(4) #define GPS_DATA _bit(3)
#define SENSOR1_DATA _bit(5) #define SENSOR1_DATA _bit(4)
#define SENSOR2_DATA _bit(6) #define SENSOR2_DATA _bit(5)
#define SENSOR3_DATA _bit(7) #define SENSOR3_DATA _bit(6)
#define BATT_DATA _bit(8) #define BATT_DATA _bit(7)
// bits in configmask for device runmode control
#define GPS_MODE _bit(1)
#define ALARM_MODE _bit(2)
#define BEACON_MODE _bit(3)
#define UPDATE_MODE _bit(4)
#define FILTER_MODE _bit(5)
#define ANTENNA_MODE _bit(6)
#define BLE_MODE _bit(7)
#define SCREEN_MODE _bit(8)
// length of display buffer for lmic event messages // length of display buffer for lmic event messages
#define LMIC_EVENTMSG_LEN 17 #define LMIC_EVENTMSG_LEN 17

View File

@ -2,8 +2,8 @@
#define _HASH_H #define _HASH_H
#include <Arduino.h> #include <Arduino.h>
#include <inttypes.h> #include <RokkitHash.h>
uint32_t IRAM_ATTR rokkit(const char *data, int len); uint32_t IRAM_ATTR hash(const char *data, int len);
#endif #endif

View File

@ -24,7 +24,7 @@
void i2c_init(void); void i2c_init(void);
void i2c_deinit(void); void i2c_deinit(void);
void i2c_scan(void); void i2c_scan(void);
uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len); int i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len);
uint8_t i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len); int i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len);
#endif #endif

View File

@ -1,16 +1,16 @@
#ifndef _IRQHANDLER_H #ifndef _IRQHANDLER_H
#define _IRQHANDLER_H #define _IRQHANDLER_H
#define DISPLAY_IRQ _bitl(1) #define DISPLAY_IRQ _bitl(0)
#define BUTTON_IRQ _bitl(2) #define BUTTON_IRQ _bitl(1)
#define SENDCYCLE_IRQ _bitl(3) #define SENDCYCLE_IRQ _bitl(2)
#define CYCLIC_IRQ _bitl(4) #define CYCLIC_IRQ _bitl(3)
#define TIMESYNC_IRQ _bitl(5) #define TIMESYNC_IRQ _bitl(4)
#define MASK_IRQ _bitl(6) #define MASK_IRQ _bitl(5)
#define UNMASK_IRQ _bitl(7) #define UNMASK_IRQ _bitl(6)
#define BME_IRQ _bitl(8) #define BME_IRQ _bitl(7)
#define MATRIX_DISPLAY_IRQ _bitl(9) #define MATRIX_DISPLAY_IRQ _bitl(8)
#define PMU_IRQ _bitl(10) #define PMU_IRQ _bitl(9)
#include "globals.h" #include "globals.h"
#include "button.h" #include "button.h"

View File

@ -14,7 +14,7 @@
#include "corona.h" #include "corona.h"
#endif #endif
uint16_t get_salt(void); uint32_t renew_salt(void);
uint64_t macConvert(uint8_t *paddr); uint64_t macConvert(uint8_t *paddr);
esp_err_t macQueueInit(void); esp_err_t macQueueInit(void);
void mac_process(void *pvParameters); void mac_process(void *pvParameters);

View File

@ -5,19 +5,10 @@
#include "rcommand.h" #include "rcommand.h"
#include <MQTT.h> #include <MQTT.h>
#include <ETH.h> #include <ETH.h>
#include <mbedtls/base64.h>
#define MQTT_ETHERNET 0 // select PHY: set 0 for Wifi, 1 for ethernet
#define MQTT_INTOPIC "paxin"
#define MQTT_OUTTOPIC "paxout"
#define MQTT_PORT 1883
#define MQTT_SERVER "paxcounter.cloud.shiftr.io"
#define MQTT_USER "public"
#define MQTT_PASSWD "public"
#define MQTT_RETRYSEC 20 // retry reconnect every 20 seconds
#define MQTT_KEEPALIVE 10 // keep alive interval in seconds
#ifndef MQTT_CLIENTNAME #ifndef MQTT_CLIENTNAME
#define MQTT_CLIENTNAME clientId.c_str() #define MQTT_CLIENTNAME clientId
#endif #endif
extern TaskHandle_t mqttTask; extern TaskHandle_t mqttTask;
@ -27,8 +18,7 @@ uint32_t mqtt_queuewaiting(void);
void mqtt_queuereset(void); void mqtt_queuereset(void);
void mqtt_client_task(void *param); void mqtt_client_task(void *param);
int mqtt_connect(const char *my_host, const uint16_t my_port); int mqtt_connect(const char *my_host, const uint16_t my_port);
void mqtt_callback(MQTTClient *client, char topic[], char payload[], void mqtt_callback(MQTTClient *client, char *topic, char *payload, int length);
int length);
void NetworkEvent(WiFiEvent_t event); void NetworkEvent(WiFiEvent_t event);
esp_err_t mqtt_init(void); esp_err_t mqtt_init(void);
void mqtt_deinit(void); void mqtt_deinit(void);

View File

@ -15,17 +15,28 @@
#include "timesync.h" #include "timesync.h"
#include "blescan.h" #include "blescan.h"
// maximum number of elements in rcommand interpreter queue
#define RCMD_QUEUE_SIZE 5
extern TaskHandle_t rcmdTask;
// table of remote commands and assigned functions // table of remote commands and assigned functions
typedef struct { typedef struct {
const uint8_t opcode; const uint8_t opcode;
void (*func)(uint8_t[]); void (*func)(uint8_t[]);
const uint8_t params; const uint8_t params;
const bool store;
} cmd_t; } cmd_t;
extern bool rcmd_busy; // Struct for remote command processing queue
typedef struct {
uint8_t cmd[10];
uint8_t cmdLen;
} RcmdBuffer_t;
void rcommand(const uint8_t cmd[], const uint8_t cmdlength); void IRAM_ATTR rcommand(const uint8_t *cmd, const size_t cmdlength);
void do_reset(bool warmstart); void rcmd_queuereset(void);
uint32_t rcmd_queuewaiting(void);
void rcmd_deinit(void);
esp_err_t rcmd_init(void);
#endif #endif

View File

@ -11,7 +11,8 @@
void do_reset(bool warmstart); void do_reset(bool warmstart);
void do_after_reset(void); void do_after_reset(void);
void enter_deepsleep(const uint64_t wakeup_sec, const gpio_num_t wakeup_gpio); void enter_deepsleep(const uint64_t wakeup_sec = 60,
const gpio_num_t wakeup_gpio = GPIO_NUM_MAX);
unsigned long long uptime(void); unsigned long long uptime(void);
#endif // _RESET_H #endif // _RESET_H

View File

@ -113,16 +113,17 @@ String BintrayClient::getLatestVersion() const
ESP_LOGE(TAG, "Error: Firmware version data invalid."); ESP_LOGE(TAG, "Error: Firmware version data invalid.");
return version; return version;
} }
StaticJsonBuffer<bufferSize> jsonBuffer; StaticJsonDocument<bufferSize> doc;
DeserializationError err = deserializeJson(doc, jsonResult.c_str());
JsonObject &root = jsonBuffer.parseObject(jsonResult.c_str());
// Check for errors in parsing // Check for errors in parsing
if (!root.success()) if (err)
{ {
ESP_LOGE(TAG, "Error: Firmware version data not found."); ESP_LOGE(TAG, "Error: Firmware version data not found.");
return version; return version;
} }
return root.get<String>("name"); return doc["name"].as<String>();
} }
String BintrayClient::getBinaryPath(const String &version) const String BintrayClient::getBinaryPath(const String &version) const
@ -137,14 +138,15 @@ String BintrayClient::getBinaryPath(const String &version) const
ESP_LOGE(TAG, "Error: Firmware download path data invalid."); ESP_LOGE(TAG, "Error: Firmware download path data invalid.");
return path; return path;
} }
StaticJsonBuffer<bufferSize> jsonBuffer; StaticJsonDocument<bufferSize> doc;
JsonArray &root = jsonBuffer.parseArray(jsonResult.c_str()); DeserializationError err = deserializeJson(doc, jsonResult.c_str());
JsonObject &firstItem = root[0];
if (!root.success()) JsonObject firstItem = doc[0];
if (err)
{ //Check for errors in parsing { //Check for errors in parsing
ESP_LOGE(TAG, "Error: Firmware download path not found."); ESP_LOGE(TAG, "Error: Firmware download path not found.");
return path; return path;
} }
return "/" + getUser() + "/" + getRepository() + "/" + firstItem.get<String>("path"); return "/" + getUser() + "/" + getRepository() + "/" + firstItem["path"].as<String>();
} }

View File

@ -21,6 +21,7 @@
;halfile = ttgobeam.h ;halfile = ttgobeam.h
halfile = ttgobeam10.h halfile = ttgobeam10.h
;halfile = ttgotdisplay.h ;halfile = ttgotdisplay.h
;halfile = ttgotwristband.h
;halfile = fipy.h ;halfile = fipy.h
;halfile = lopy.h ;halfile = lopy.h
;halfile = lopy4.h ;halfile = lopy4.h
@ -47,7 +48,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common] [common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c" ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 2.1.0 release_version = 2.3.0
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running! ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3 debug_level = 3
@ -55,7 +56,7 @@ extra_scripts = pre:build.py
otakeyfile = ota.conf otakeyfile = ota.conf
lorakeyfile = loraconf.h lorakeyfile = loraconf.h
lmicconfigfile = lmic_config.h lmicconfigfile = lmic_config.h
platform_espressif32 = espressif32@2.1.0 platform_espressif32 = espressif32@3.0.0
monitor_speed = 115200 monitor_speed = 115200
upload_speed = 115200 ; set by build.py and taken from hal file upload_speed = 115200 ; set by build.py and taken from hal file
display_library = ; set by build.py and taken from hal file display_library = ; set by build.py and taken from hal file
@ -79,11 +80,13 @@ lib_deps_sensors =
boschsensortec/BSEC Software Library @ 1.6.1480 boschsensortec/BSEC Software Library @ 1.6.1480
https://github.com/ricki-z/SDS011.git https://github.com/ricki-z/SDS011.git
lib_deps_basic = lib_deps_basic =
bblanchon/ArduinoJson @ <6 https://github.com/SukkoPera/Arduino-Rokkit-Hash.git
bblanchon/ArduinoJson @ ^6
jchristensen/Timezone @ ^1.2.4 jchristensen/Timezone @ ^1.2.4
makuna/RTC @ ^2.3.5 makuna/RTC @ ^2.3.5
spacehuhn/SimpleButton spacehuhn/SimpleButton
lewisxhe/AXP202X_Library @ ^1.1.2 ;lewisxhe/AXP202X_Library @ ^1.1.2
https://github.com/lewisxhe/AXP202X_Library.git
geeksville/esp32-micro-sdcard @ ^0.1.1 geeksville/esp32-micro-sdcard @ ^0.1.1
256dpi/MQTT @ ^2.4.7 256dpi/MQTT @ ^2.4.7
lib_deps_all = lib_deps_all =

467
src/Node-RED/MQTT.json Normal file
View File

@ -0,0 +1,467 @@
[
{
"id": "7bc3eb4f.fe4b64",
"type": "mqtt in",
"z": "c26229c6.2d1ae8",
"name": "Olimex",
"topic": "paxout/#",
"qos": "2",
"datatype": "utf8",
"broker": "bd56b04d.db0ff",
"x": 190,
"y": 160,
"wires": [
[
"d0276db6.83c46"
]
]
},
{
"id": "4f59740b.296b7c",
"type": "debug",
"z": "c26229c6.2d1ae8",
"name": "data",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"statusVal": "",
"statusType": "auto",
"x": 1050,
"y": 280,
"wires": []
},
{
"id": "f10f8199.25183",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "wifi",
"property": "payload",
"pattern": "l16, x16",
"x": 630,
"y": 100,
"wires": [
[
"800f5faa.15155"
]
]
},
{
"id": "df4bdce5.dc219",
"type": "switch",
"z": "c26229c6.2d1ae8",
"name": "Ports",
"property": "topic",
"propertyType": "msg",
"rules": [
{
"t": "eq",
"v": "paxout/1",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/2",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/3",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/4",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/5",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/6",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/7",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/8",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/9",
"vt": "str"
},
{
"t": "eq",
"v": "paxout/10",
"vt": "str"
},
{
"t": "eq",
"v": "status",
"vt": "str"
}
],
"checkall": "true",
"repair": false,
"outputs": 11,
"x": 370,
"y": 260,
"wires": [
[
"f10f8199.25183"
],
[
"e2974f79.55d5b"
],
[
"5f6987dd.b89378"
],
[],
[
"eaca83c4.5fcaf"
],
[],
[],
[
"7b6cbc9d.18fe44"
],
[
"d269537.4738fb"
],
[
"409e4762.71ff68"
],
[
"13fbfc5d.40dcc4"
]
]
},
{
"id": "eaca83c4.5fcaf",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "button",
"property": "payload",
"pattern": "b8 => button",
"x": 630,
"y": 280,
"wires": [
[
"a6037445.eb8ac8"
]
]
},
{
"id": "409e4762.71ff68",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "cwa",
"property": "payload",
"pattern": "l16 => cwa",
"x": 630,
"y": 140,
"wires": [
[
"2966fd1c.0b33d2"
]
]
},
{
"id": "d0276db6.83c46",
"type": "base64",
"z": "c26229c6.2d1ae8",
"name": "Decode",
"action": "",
"property": "payload",
"x": 200,
"y": 260,
"wires": [
[
"df4bdce5.dc219"
]
]
},
{
"id": "13fbfc5d.40dcc4",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "Connection",
"property": "payload",
"pattern": "b8[19]|str(\"ascii\")",
"x": 650,
"y": 440,
"wires": [
[
"4f59740b.296b7c"
]
]
},
{
"id": "800f5faa.15155",
"type": "ui_chart",
"z": "c26229c6.2d1ae8",
"name": "pax",
"group": "6838565d.06bf08",
"order": 1,
"width": 0,
"height": 0,
"label": "Pax [Wifi]",
"chartType": "line",
"legend": "false",
"xformat": "dd HH:mm",
"interpolate": "linear",
"nodata": "Noch keine Daten",
"dot": false,
"ymin": "",
"ymax": "",
"removeOlder": 1,
"removeOlderPoints": "",
"removeOlderUnit": "3600",
"cutout": 0,
"useOneColor": false,
"useUTC": false,
"colors": [
"#1f77b4",
"#aec7e8",
"#ff7f0e",
"#2ca02c",
"#98df8a",
"#d62728",
"#ff9896",
"#9467bd",
"#c5b0d5"
],
"outputs": 1,
"x": 810,
"y": 100,
"wires": [
[]
]
},
{
"id": "2966fd1c.0b33d2",
"type": "ui_chart",
"z": "c26229c6.2d1ae8",
"name": "cwa",
"group": "6838565d.06bf08",
"order": 1,
"width": 0,
"height": 0,
"label": "CWA",
"chartType": "line",
"legend": "false",
"xformat": "dd HH:mm",
"interpolate": "linear",
"nodata": "",
"dot": false,
"ymin": "",
"ymax": "",
"removeOlder": 1,
"removeOlderPoints": "",
"removeOlderUnit": "3600",
"cutout": 0,
"useOneColor": false,
"useUTC": false,
"colors": [
"#1f77b4",
"#aec7e8",
"#ff7f0e",
"#2ca02c",
"#98df8a",
"#d62728",
"#ff9896",
"#9467bd",
"#c5b0d5"
],
"outputs": 1,
"x": 810,
"y": 140,
"wires": [
[]
]
},
{
"id": "a6037445.eb8ac8",
"type": "ui_toast",
"z": "c26229c6.2d1ae8",
"position": "top right",
"displayTime": "3",
"highlight": "",
"sendall": true,
"outputs": 0,
"ok": "OK",
"cancel": "",
"raw": false,
"topic": "Button",
"name": "Popup",
"x": 810,
"y": 280,
"wires": []
},
{
"id": "b4478f8.f8b747",
"type": "mqtt out",
"z": "c26229c6.2d1ae8",
"name": "Olimex",
"topic": "paxin",
"qos": "",
"retain": "",
"broker": "bd56b04d.db0ff",
"x": 190,
"y": 480,
"wires": []
},
{
"id": "e2974f79.55d5b",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "device status",
"property": "payload",
"pattern": "l16 => voltage,\nl64 => uptime,\nb8 => temperature,\nl32 => ram,\nb8 => reset0,\nb8 => reset1",
"x": 650,
"y": 200,
"wires": [
[
"4f59740b.296b7c"
]
]
},
{
"id": "5f6987dd.b89378",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "device config",
"property": "payload",
"pattern": "b8 => loradr,\nb8 => txPower,\nl16 => rssilimit,\nb8 => sendcycle,\nb8 => wifichancycle,\nb8 => blescantime,\nb8 => rgblum,\nb8 => configmask,\nb8 => payloadmask,\nb8z|str(\"ascii\") => version",
"x": 650,
"y": 240,
"wires": [
[
"4f59740b.296b7c"
]
]
},
{
"id": "7b6cbc9d.18fe44",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "battery",
"property": "payload",
"pattern": "l16 => voltage",
"x": 630,
"y": 360,
"wires": [
[
"4f59740b.296b7c"
]
]
},
{
"id": "d269537.4738fb",
"type": "binary",
"z": "c26229c6.2d1ae8",
"name": "time",
"property": "payload",
"pattern": "l32 => unixtime",
"x": 630,
"y": 400,
"wires": [
[
"4f59740b.296b7c"
]
]
},
{
"id": "ce0cb32b.b7b96",
"type": "base64",
"z": "c26229c6.2d1ae8",
"name": "Encode",
"action": "",
"property": "payload",
"x": 200,
"y": 420,
"wires": [
[
"b4478f8.f8b747"
]
]
},
{
"id": "c246a129.eeb5e",
"type": "inject",
"z": "c26229c6.2d1ae8",
"name": "rcmd",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "paxin",
"payload": "[128, 129]",
"payloadType": "bin",
"x": 190,
"y": 360,
"wires": [
[
"ce0cb32b.b7b96"
]
]
},
{
"id": "bd56b04d.db0ff",
"type": "mqtt-broker",
"name": "Shiftr.io",
"broker": "public.cloud.shiftr.io",
"port": "1883",
"clientid": "",
"usetls": false,
"compatmode": false,
"keepalive": "60",
"cleansession": true,
"birthTopic": "paxout/status",
"birthQos": "0",
"birthPayload": "on",
"closeTopic": "paxout/status",
"closeQos": "0",
"closePayload": "off",
"willTopic": "paxout/status",
"willQos": "0",
"willPayload": "unknown"
},
{
"id": "6838565d.06bf08",
"type": "ui_group",
"name": "MQTT",
"tab": "ad5894fa.466c58",
"order": 1,
"disp": true,
"width": "6",
"collapse": false
},
{
"id": "ad5894fa.466c58",
"type": "ui_tab",
"name": "Paxcounter",
"icon": "people",
"order": 4
}
]

View File

@ -262,7 +262,7 @@ var bitmap2 = function (byte) {
} }
var i = bytesToInt(byte); var i = bytesToInt(byte);
var bm = ('00000000' + Number(i).toString(2)).substr(-8).split('').map(Number).map(Boolean); var bm = ('00000000' + Number(i).toString(2)).substr(-8).split('').map(Number).map(Boolean);
return ['battery', 'sensor3', 'sensor2', 'sensor1', 'counter', 'bme', 'alarm', 'gps'] return ['battery', 'sensor3', 'sensor2', 'sensor1', 'gps', 'bme', 'alarm', 'counter']
.reduce(function (obj, pos, index) { .reduce(function (obj, pos, index) {
obj[pos] = +bm[index]; obj[pos] = +bm[index];
return obj; return obj;

View File

@ -277,12 +277,11 @@ void start_BLEscan(void) {
// Register callback function for capturing bluetooth packets // Register callback function for capturing bluetooth packets
register_ble_callback(false); register_ble_callback(false);
ESP_LOGI(TAG, "Bluetooth scanner started"); ESP_LOGI(TAG, "Bluetooth scanner started");
#endif // BLECOUNTER
} else { } else {
ESP_LOGE(TAG, "Bluetooth controller start failed. Resetting device"); ESP_LOGE(TAG, "Bluetooth controller start failed. Resetting device");
do_reset(true); do_reset(true);
} }
#endif // BLECOUNTER
} // start_BLEscan } // start_BLEscan
void stop_BLEscan(void) { void stop_BLEscan(void) {

View File

@ -46,10 +46,10 @@ Adafruit_BMP085 bmp; // I2C
void setBMEIRQ() { xTaskNotify(irqHandlerTask, BME_IRQ, eSetBits); } void setBMEIRQ() { xTaskNotify(irqHandlerTask, BME_IRQ, eSetBits); }
// initialize MEMS sensor // initialize MEMS sensor
// return = 0 -> error / return = 1 -> success
int bme_init(void) { int bme_init(void) {
// return = 0 -> error / return = 1 -> success int rc = 0;
int rc = 1;
#ifdef HAS_BME680 #ifdef HAS_BME680
// block i2c bus access // block i2c bus access
@ -63,76 +63,33 @@ int bme_init(void) {
iaqSensor.version.minor_bugfix); iaqSensor.version.minor_bugfix);
iaqSensor.setConfig(bsec_config_iaq); iaqSensor.setConfig(bsec_config_iaq);
if (checkIaqSensorStatus())
ESP_LOGI(TAG, "BME680 sensor found and initialized");
else {
ESP_LOGE(TAG, "BME680 sensor not found");
rc = 0;
goto finish;
}
loadState(); loadState();
iaqSensor.setTemperatureOffset((float)BME_TEMP_OFFSET); iaqSensor.setTemperatureOffset((float)BME_TEMP_OFFSET);
iaqSensor.updateSubscription(sensorList, 10, BSEC_SAMPLE_RATE_LP); iaqSensor.updateSubscription(sensorList, 10, BSEC_SAMPLE_RATE_LP);
if (checkIaqSensorStatus()) rc = checkIaqSensorStatus();
ESP_LOGI(TAG, "BSEC subscription succesful");
else { } else
ESP_LOGE(TAG, "BSEC subscription error");
rc = 0;
goto finish;
}
} else {
ESP_LOGE(TAG, "I2c bus busy - BME680 initialization error"); ESP_LOGE(TAG, "I2c bus busy - BME680 initialization error");
rc = 0;
goto finish;
}
#elif defined HAS_BME280 #elif defined HAS_BME280
bool status;
// block i2c bus access
if (I2C_MUTEX_LOCK()) { if (I2C_MUTEX_LOCK()) {
rc = bme.begin(BME280_ADDR);
status = bme.begin(BME280_ADDR); } else
if (!status) {
ESP_LOGE(TAG, "BME280 sensor not found");
rc = 0;
goto finish;
}
ESP_LOGI(TAG, "BME280 sensor found and initialized");
} else {
ESP_LOGE(TAG, "I2c bus busy - BME280 initialization error"); ESP_LOGE(TAG, "I2c bus busy - BME280 initialization error");
rc = 0;
goto finish;
}
#elif defined HAS_BMP180 #elif defined HAS_BMP180
bool status;
// block i2c bus access
if (I2C_MUTEX_LOCK()) { if (I2C_MUTEX_LOCK()) {
// Wire.begin(21, 22); // Wire.begin(21, 22);
status = bmp.begin(); rc = bmp.begin();
if (!status) { } else
ESP_LOGE(TAG, "BMP180 sensor not found");
rc = 0;
goto finish;
}
ESP_LOGI(TAG, "BMP180 sensor found and initialized");
} else {
ESP_LOGE(TAG, "I2c bus busy - BMP180 initialization error"); ESP_LOGE(TAG, "I2c bus busy - BMP180 initialization error");
rc = 0;
goto finish;
}
#endif #endif
finish:
I2C_MUTEX_UNLOCK(); // release i2c bus access I2C_MUTEX_UNLOCK(); // release i2c bus access
if (rc) if (rc)
bmecycler.attach(BMECYCLE, setBMEIRQ); bmecycler.attach(BMECYCLE, setBMEIRQ); // start cyclic data transmit
return rc; return rc;
} // bme_init() } // bme_init()

View File

@ -5,6 +5,10 @@
// (c) by Kaspar Metz // (c) by Kaspar Metz
// modified for use in the Paxcounter by AQ // modified for use in the Paxcounter by AQ
#if (COUNT_ENS) && !(BLECOUNTER)
#warning ENS-Counter needs Bluetooth, but Bluetooth compile option is disabled
#endif
#if (COUNT_ENS) #if (COUNT_ENS)
// Local logging tag // Local logging tag

View File

@ -14,22 +14,15 @@ extern boolean isSDS011Active;
#endif #endif
void setCyclicIRQ() { void setCyclicIRQ() {
xTaskNotifyFromISR(irqHandlerTask, CYCLIC_IRQ, eSetBits, NULL); xTaskNotify(irqHandlerTask, CYCLIC_IRQ, eSetBits);
} }
// do all housekeeping // do all housekeeping
void doHousekeeping() { void doHousekeeping() {
// check if update mode trigger switch was set // check if update mode trigger switch was set by rcommand
if (RTC_runmode == RUNMODE_UPDATE) { if (RTC_runmode == RUNMODE_UPDATE)
// check battery status if we can before doing ota do_reset(true);
if (batt_sufficient()) {
do_reset(true); // warmstart to runmode update
} else {
ESP_LOGE(TAG, "Battery level %d%% is too low for OTA", batt_level);
RTC_runmode = RUNMODE_NORMAL; // keep running in normal mode
}
}
// heap and task storage debugging // heap and task storage debugging
ESP_LOGD(TAG, "Heap: Free:%d, Min:%d, Size:%d, Alloc:%d, StackHWM:%d", ESP_LOGD(TAG, "Heap: Free:%d, Min:%d, Size:%d, Alloc:%d, StackHWM:%d",
@ -41,6 +34,8 @@ void doHousekeeping() {
ESP_LOGD(TAG, "MACprocessor %d bytes left | Taskstate = %d", ESP_LOGD(TAG, "MACprocessor %d bytes left | Taskstate = %d",
uxTaskGetStackHighWaterMark(macProcessTask), uxTaskGetStackHighWaterMark(macProcessTask),
eTaskGetState(macProcessTask)); eTaskGetState(macProcessTask));
ESP_LOGD(TAG, "Rcommand interpreter %d bytes left | Taskstate = %d",
uxTaskGetStackHighWaterMark(rcmdTask), eTaskGetState(rcmdTask));
#if (HAS_LORA) #if (HAS_LORA)
ESP_LOGD(TAG, "LMiCtask %d bytes left | Taskstate = %d", ESP_LOGD(TAG, "LMiCtask %d bytes left | Taskstate = %d",
uxTaskGetStackHighWaterMark(lmicTask), eTaskGetState(lmicTask)); uxTaskGetStackHighWaterMark(lmicTask), eTaskGetState(lmicTask));
@ -104,7 +99,6 @@ void doHousekeeping() {
"free heap = %d bytes)", "free heap = %d bytes)",
ESP.getMinFreeHeap(), ESP.getFreeHeap()); ESP.getMinFreeHeap(), ESP.getFreeHeap());
reset_counters(); // clear macs container and reset all counters reset_counters(); // clear macs container and reset all counters
get_salt(); // get new salt for salting hashes
if (ESP.getMinFreeHeap() <= MEM_LOW) // check again if (ESP.getMinFreeHeap() <= MEM_LOW) // check again
do_reset(true); // memory leak, reset device do_reset(true); // memory leak, reset device
@ -115,7 +109,6 @@ void doHousekeeping() {
if (ESP.getMinFreePsram() <= MEM_LOW) { if (ESP.getMinFreePsram() <= MEM_LOW) {
ESP_LOGI(TAG, "PSRAM full, counter cleared"); ESP_LOGI(TAG, "PSRAM full, counter cleared");
reset_counters(); // clear macs container and reset all counters reset_counters(); // clear macs container and reset all counters
get_salt(); // get new salt for salting hashes
if (ESP.getMinFreePsram() <= MEM_LOW) // check again if (ESP.getMinFreePsram() <= MEM_LOW) // check again
do_reset(true); // memory leak, reset device do_reset(true); // memory leak, reset device
@ -147,6 +140,7 @@ void reset_counters() {
macs.clear(); // clear all macs container macs.clear(); // clear all macs container
macs_wifi = 0; macs_wifi = 0;
macs_ble = 0; macs_ble = 0;
renew_salt(); // get new salt
#ifdef HAS_DISPLAY #ifdef HAS_DISPLAY
dp_plotCurve(0, true); dp_plotCurve(0, true);
#endif #endif

View File

@ -345,10 +345,10 @@ void dp_drawPage(time_t t, bool nextpage) {
#if (HAS_LORA) #if (HAS_LORA)
// LMiC event display // LMiC event display
dp_printf("%-16s", lmic_event_msg); dp_printf("%-16s ", lmic_event_msg);
// LORA datarate, display inverse if ADR disabled // LORA datarate, display inverse if ADR disabled
dp_setFont(MY_FONT_SMALL, !cfg.adrmode); dp_setFont(MY_FONT_SMALL, !cfg.adrmode);
dp_printf(" %-4s", getSfName(updr2rps(LMIC.datarate))); dp_printf("%-4s", getSfName(updr2rps(LMIC.datarate)));
dp_setFont(MY_FONT_SMALL, 0); dp_setFont(MY_FONT_SMALL, 0);
dp_println(); dp_println();
#endif // HAS_LORA #endif // HAS_LORA
@ -400,7 +400,7 @@ void dp_drawPage(time_t t, bool nextpage) {
gps.location.lat()); gps.location.lat());
// line 6-7: GPS longitude // line 6-7: GPS longitude
dp_printf("%c%07.4f", gps.location.rawLat().negative ? 'W' : 'E', dp_printf("%c%07.4f", gps.location.rawLng().negative ? 'W' : 'E',
gps.location.lng()); gps.location.lng());
} else { } else {

View File

@ -30,34 +30,27 @@ static uint16_t nmea_txDelay_ms = 0;
// initialize and configure GPS // initialize and configure GPS
int gps_init(void) { int gps_init(void) {
int ret = 1;
if (!gps_config()) { if (!gps_config()) {
ESP_LOGE(TAG, "GPS chip initializiation error"); ESP_LOGE(TAG, "GPS chip initializiation error");
return 0; return 0;
} }
#ifdef GPS_SERIAL #ifdef GPS_SERIAL
ESP_LOGI(TAG, "Opening serial GPS");
GPS_Serial.begin(GPS_SERIAL); GPS_Serial.begin(GPS_SERIAL);
ESP_LOGI(TAG, "Using serial GPS");
#elif defined GPS_I2C #elif defined GPS_I2C
ESP_LOGI(TAG, "Opening I2C GPS");
Wire.begin(GPS_I2C, 400000); // I2C connect to GPS device with 400 KHz Wire.begin(GPS_I2C, 400000); // I2C connect to GPS device with 400 KHz
Wire.beginTransmission(GPS_ADDR); Wire.beginTransmission(GPS_ADDR);
Wire.write(0x00); // dummy write Wire.write(0x00); // dummy write
ret = Wire.endTransmission(); // check if chip is seen on i2c bus if (Wire.endTransmission()) {
ESP_LOGE(TAG, "Quectel L76 GPS chip not found");
if (ret) { return 0;
ESP_LOGE(TAG, } else
"Quectel L76 GPS chip not found on i2c bus, bus error %d. "
"Stopping GPS-Task.",
ret);
ret = 0;
} else {
ESP_LOGI(TAG, "Quectel L76 GPS chip found"); ESP_LOGI(TAG, "Quectel L76 GPS chip found");
}
#endif #endif
return ret; return 1;
} // gps_init() } // gps_init()
// detect gps chipset type and configure it with device specific settings // detect gps chipset type and configure it with device specific settings
@ -109,7 +102,7 @@ time_t get_gpstime(uint16_t *msec) {
#endif #endif
// did we get a current date & time? // did we get a current date & time?
if (gpstime.isValid() && gpsday.isValid()) { if (gpstime.isValid()) {
time_t t = 0; time_t t = 0;
tmElements_t tm; tmElements_t tm;
@ -126,8 +119,8 @@ time_t get_gpstime(uint16_t *msec) {
tm.Year = CalendarYrToTm(atoi(gpsyear.value())); // year offset from 1970 tm.Year = CalendarYrToTm(atoi(gpsyear.value())); // year offset from 1970
t = makeTime(tm); t = makeTime(tm);
// ESP_LOGD(TAG, "GPS time/date = %2d:%2d:%2d / %2d.%2d.%2d", tm.Hour, ESP_LOGD(TAG, "GPS time/date = %02d:%02d:%02d / %02d.%02d.%2d", tm.Hour,
// tm.Minute, tm.Second, tm.Day, tm.Month, tm.Year + 1970); tm.Minute, tm.Second, tm.Day, tm.Month, tm.Year + 1970);
// add protocol delay with millisecond precision // add protocol delay with millisecond precision
t += delay_ms / 1000 - 1; // whole seconds t += delay_ms / 1000 - 1; // whole seconds

View File

@ -10,7 +10,6 @@
// Hardware related definitions for Pycom LoPy4 Board // Hardware related definitions for Pycom LoPy4 Board
#define HAS_LORA 1 // comment out if device shall not send data via LoRa #define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define LORA_RST LMIC_UNUSED_PIN // reset pin of lora chip is not wired von LoPy4
//#defin HAS_SPI 1 // comment out if device shall not send data via SPI //#defin HAS_SPI 1 // comment out if device shall not send data via SPI
// pin definitions for local wired SPI slave interface // pin definitions for local wired SPI slave interface

58
src/hal/ttgotwristband.h Normal file
View File

@ -0,0 +1,58 @@
// clang-format off
// upload_speed 1500000
// board pico32
#ifndef _TTGOTWRISTBAND_H
#define _TTGOTWRISTBAND_H
#include <stdint.h>
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY 2 // TFT-LCD, support work in progess, not ready yet
#define MY_DISPLAY_FLIP 1 // use if display is rotated
#define HAS_LED NOT_A_PIN // no on board LED (?)
#define HAS_BUTTON (33) // on board button A
// power management settings
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BAT_VOLTAGE_DIVIDER 2.605f // voltage divider
// Display Settings
#define MY_DISPLAY_WIDTH 80
#define MY_DISPLAY_HEIGHT 160
#define MY_DISPLAY_INVERT 1
// setting for TTGO T-display
#define USER_SETUP_LOADED 1
#define ST7735_DRIVER 1
#define CGRAM_OFFSET
#define TFT_MISO -1
#define TFT_MOSI GPIO_NUM_19 // SPI
#define TFT_SCLK GPIO_NUM_18 // SPI
#define TFT_CS GPIO_NUM_5 // Chip select control
#define TFT_DC GPIO_NUM_23 // Data Command control
#define TFT_RST GPIO_NUM_26 // Reset
#define TFT_BL GPIO_NUM_27 // LED back-light
#define TFT_BACKLIGHT_ON 1
#define ST7735_GREENTAB160x80
#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
#define SPI_FREQUENCY 27000000
#define SPI_READ_FREQUENCY 6000000
#endif

View File

@ -36,52 +36,10 @@
#include "hash.h" #include "hash.h"
uint32_t IRAM_ATTR rokkit(const char *data, int len) { #ifdef ROKKIT_ENABLE_8BIT_OPTIMIZATIONS
uint32_t hash, tmp; #undef ROKKIT_ENABLE_8BIT_OPTIMIZATIONS
int rem; #endif
if (len <= 0 || data == 0) uint32_t IRAM_ATTR hash(const char *data, int len) {
return 0; return rokkit(data, len);
hash = len;
rem = len & 3;
len >>= 2;
/* Main loop */
while (len > 0) {
hash += *((uint16_t *)data);
tmp = (*((uint16_t *)(data + 2)) << 11) ^ hash;
hash = (hash << 16) ^ tmp;
data += 2 * 2;
hash += hash >> 11;
len--;
}
/* Handle end cases */
switch (rem) {
case 3:
hash += *((uint16_t *)data);
hash ^= hash << 16;
hash ^= ((signed char)data[2]) << 18;
hash += hash >> 11;
break;
case 2:
hash += *((uint16_t *)data);
hash ^= hash << 11;
hash += hash >> 17;
break;
case 1:
hash += (signed char)*data;
hash ^= hash << 10;
hash += hash >> 1;
}
/* Force "avalanching" of final 127 bits */
hash ^= hash << 3;
hash += hash >> 5;
hash ^= hash << 4;
hash += hash >> 17;
hash ^= hash << 25;
hash += hash >> 6;
return hash;
} }

View File

@ -84,7 +84,7 @@ void i2c_scan(void) {
} }
// mutexed functions for i2c r/w access // mutexed functions for i2c r/w access
uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) { int i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) {
if (I2C_MUTEX_LOCK()) { if (I2C_MUTEX_LOCK()) {
uint8_t ret = 0; uint8_t ret = 0;
@ -112,7 +112,7 @@ uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) {
} }
} }
uint8_t i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) { int i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) {
if (I2C_MUTEX_LOCK()) { if (I2C_MUTEX_LOCK()) {
uint8_t ret = 0; uint8_t ret = 0;

View File

@ -18,9 +18,10 @@
// use interrupts only if LORA_IRQ and LORA_DIO are connected to interrupt // use interrupts only if LORA_IRQ and LORA_DIO are connected to interrupt
// capable and separate GPIO pins on your board, if not don't enable // capable and separate GPIO pins on your board, if not don't enable
#if (LORA_IRQ) != (LORA_IO1) // note: this feature can't be used on ESP32 unless PR #556 of MCCI LMIC was merged
#define LMIC_USE_INTERRUPTS 1 //#if (LORA_IRQ) != (LORA_IO1)
#endif //#define LMIC_USE_INTERRUPTS 1
//#endif
// avoid lmic warning if we don't configure radio in case we haven't one // avoid lmic warning if we don't configure radio in case we haven't one
#if !(defined(CFG_sx1272_radio) || defined(CFG_sx1276_radio)) #if !(defined(CFG_sx1272_radio) || defined(CFG_sx1276_radio))

View File

@ -19,7 +19,7 @@ RTC_DATA_ATTR lmic_t RTC_LMIC;
#endif #endif
#endif #endif
QueueHandle_t LoraSendQueue; static QueueHandle_t LoraSendQueue;
TaskHandle_t lmicTask = NULL, lorasendTask = NULL; TaskHandle_t lmicTask = NULL, lorasendTask = NULL;
class MyHalConfig_t : public Arduino_LMIC::HalConfiguration_t { class MyHalConfig_t : public Arduino_LMIC::HalConfiguration_t {
@ -284,14 +284,10 @@ esp_err_t lmic_init(void) {
// Pass OTA parameters to LMIC_setSession // Pass OTA parameters to LMIC_setSession
#else #else
// load saved session from RTC, if we have one // load saved session from RTC, if we have one
if (RTC_runmode == RUNMODE_WAKEUP) { if (RTC_runmode == RUNMODE_WAKEUP)
LoadLMICFromRTC(); LoadLMICFromRTC();
}
// otherwise start join procedure if not already joined
else {
if (!LMIC_startJoining()) if (!LMIC_startJoining())
ESP_LOGI(TAG, "Already joined"); ESP_LOGI(TAG, "Already joined");
}
#endif #endif
// start lmic loop task // start lmic loop task
@ -545,7 +541,7 @@ void SaveLMICToRTC(int deepsleep_sec) {
unsigned long now = millis(); unsigned long now = millis();
// EU Like Bands // EU Like Bands
#if defined(CFG_LMIC_EU_like) #if CFG_LMIC_EU_like
for (int i = 0; i < MAX_BANDS; i++) { for (int i = 0; i < MAX_BANDS; i++) {
ostime_t correctedAvail = ostime_t correctedAvail =
RTC_LMIC.bands[i].avail - RTC_LMIC.bands[i].avail -

View File

@ -6,13 +6,14 @@
// Local logging tag // Local logging tag
static const char TAG[] = __FILE__; static const char TAG[] = __FILE__;
QueueHandle_t MacQueue; static QueueHandle_t MacQueue;
TaskHandle_t macProcessTask; TaskHandle_t macProcessTask;
uint16_t salt = 0; static uint32_t salt = renew_salt();
uint16_t get_salt(void) { uint32_t renew_salt(void) {
salt = (uint16_t)random(65536); // get new 16bit random for salting hashes salt = esp_random();
ESP_LOGV(TAG, "new salt = %04X", salt);
return salt; return salt;
} }
@ -101,8 +102,9 @@ void IRAM_ATTR mac_add(uint8_t *paddr, int8_t rssi, snifftype_t sniff_type) {
uint16_t mac_analyze(MacBuffer_t MacBuffer) { uint16_t mac_analyze(MacBuffer_t MacBuffer) {
if (salt == 0) // ensure we have salt (appears after radio is turned on) uint32_t *mac; // pointer to shortened 4 byte MAC
return 0; uint32_t saltedmac;
uint16_t hashedmac;
if ((cfg.rssilimit) && if ((cfg.rssilimit) &&
(MacBuffer.rssi < cfg.rssilimit)) { // rssi is negative value (MacBuffer.rssi < cfg.rssilimit)) { // rssi is negative value
@ -117,18 +119,13 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
int8_t beaconID = isBeacon(macConvert(MacBuffer.mac)); int8_t beaconID = isBeacon(macConvert(MacBuffer.mac));
if (beaconID >= 0) { if (beaconID >= 0) {
ESP_LOGI(TAG, "Beacon ID#%d detected", beaconID); ESP_LOGI(TAG, "Beacon ID#%d detected", beaconID);
#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
blink_LED(COLOR_WHITE, 2000); blink_LED(COLOR_WHITE, 2000);
#endif
payload.reset(); payload.reset();
payload.addAlarm(MacBuffer.rssi, beaconID); payload.addAlarm(MacBuffer.rssi, beaconID);
SendPayload(BEACONPORT); SendPayload(BEACONPORT);
} }
}; };
char buff[10]; // temporary buffer for printf
uint32_t *mac; // temporary buffer for shortened MAC
// only last 3 MAC Address bytes are used for MAC address anonymization // only last 3 MAC Address bytes are used for MAC address anonymization
// but since it's uint32 we take 4 bytes to avoid 1st value to be 0. // but since it's uint32 we take 4 bytes to avoid 1st value to be 0.
// this gets MAC in msb (= reverse) order, but doesn't matter for hashing it. // this gets MAC in msb (= reverse) order, but doesn't matter for hashing it.
@ -138,10 +135,14 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
// and increment counter on display // and increment counter on display
// https://en.wikipedia.org/wiki/MAC_Address_Anonymization // https://en.wikipedia.org/wiki/MAC_Address_Anonymization
snprintf(buff, sizeof(buff), "%08X", // reversed 4 byte MAC added to current salt
*mac + (uint32_t)salt); // convert unsigned 32-bit salted MAC saltedmac = *mac + salt;
// to 8 digit hex string
uint16_t hashedmac = rokkit(&buff[3], 5); // hash MAC 8 digit -> 5 digit // hashed 4 byte MAC
// to save RAM, we use only lower 2 bytes of hash, since collisions don't
// matter in our use case
hashedmac = hash((const char *)&saltedmac, 4);
auto newmac = macs.insert(hashedmac); // add hashed MAC, if new unique auto newmac = macs.insert(hashedmac); // add hashed MAC, if new unique
bool added = bool added =
newmac.second ? true : false; // true if hashed MAC is unique in container newmac.second ? true : false; // true if hashed MAC is unique in container
@ -153,37 +154,30 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
case MAC_SNIFF_WIFI: case MAC_SNIFF_WIFI:
macs_wifi++; // increment Wifi MACs counter macs_wifi++; // increment Wifi MACs counter
#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
blink_LED(COLOR_GREEN, 50); blink_LED(COLOR_GREEN, 50);
#endif
break; break;
#if (BLECOUNTER)
case MAC_SNIFF_BLE: case MAC_SNIFF_BLE:
macs_ble++; // increment BLE Macs counter macs_ble++; // increment BLE Macs counter
#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
blink_LED(COLOR_MAGENTA, 50); blink_LED(COLOR_MAGENTA, 50);
#endif
break; break;
#if (COUNT_ENS) #if (COUNT_ENS)
case MAC_SNIFF_BLE_ENS: case MAC_SNIFF_BLE_ENS:
macs_ble++; // increment BLE Macs counter macs_ble++; // increment BLE Macs counter
cwa_mac_add(hashedmac); // process ENS beacon cwa_mac_add(hashedmac); // process ENS beacon
#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
blink_LED(COLOR_WHITE, 50); blink_LED(COLOR_WHITE, 50);
#endif
break; break;
#endif
#endif // COUNT_ENS default:
#endif // BLECOUNTER break;
} // switch } // switch
} // added } // added
// Log scan result // Log scan result
ESP_LOGV(TAG, ESP_LOGV(TAG,
"%s %s RSSI %ddBi -> salted MAC %s -> Hash %04X -> WiFi:%d " "%s %s RSSI %ddBi -> MAC %0x:%0x:%0x:%0x:%0x:%0x -> salted %04X"
" -> hashed %04X -> WiFi:%d "
"BLTH:%d " "BLTH:%d "
#if (COUNT_ENS) #if (COUNT_ENS)
"(CWA:%d)" "(CWA:%d)"
@ -191,7 +185,9 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
"-> %d Bytes left", "-> %d Bytes left",
added ? "new " : "known", added ? "new " : "known",
MacBuffer.sniff_type == MAC_SNIFF_WIFI ? "WiFi" : "BLTH", MacBuffer.sniff_type == MAC_SNIFF_WIFI ? "WiFi" : "BLTH",
MacBuffer.rssi, buff, hashedmac, macs_wifi, macs_ble, MacBuffer.rssi, MacBuffer.mac[0], MacBuffer.mac[1], MacBuffer.mac[2],
MacBuffer.mac[3], MacBuffer.mac[4], MacBuffer.mac[5], saltedmac,
hashedmac, macs_wifi, macs_ble,
#if (COUNT_ENS) #if (COUNT_ENS)
cwa_report(), cwa_report(),
#endif #endif

View File

@ -29,16 +29,17 @@ Task Core Prio Purpose
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
ledloop 0 3 blinks LEDs ledloop 0 3 blinks LEDs
spiloop 0 2 reads/writes data on spi interface spiloop 0 2 reads/writes data on spi interface
mqttloop 0 2 reads/writes data on ETH interface
IDLE 0 0 ESP32 arduino scheduler -> runs wifi sniffer IDLE 0 0 ESP32 arduino scheduler -> runs wifi sniffer
lmictask 1 2 MCCI LMiC LORAWAN stack lmictask 1 2 MCCI LMiC LORAWAN stack
clockloop 1 4 generates realtime telegrams for external clock clockloop 1 4 generates realtime telegrams for external clock
mqttloop 1 2 reads/writes data on ETH interface
timesync_proc 1 3 processes realtime time sync requests timesync_proc 1 3 processes realtime time sync requests
irqhandler 1 2 cyclic tasks (i.e. displayrefresh) triggered by timers irqhandler 1 2 cyclic tasks (i.e. displayrefresh) triggered by timers
gpsloop 1 1 reads data from GPS via serial or i2c gpsloop 1 1 reads data from GPS via serial or i2c
lorasendtask 1 1 feeds data from lora sendqueue to lmcic lorasendtask 1 1 feeds data from lora sendqueue to lmcic
macprocess 1 1 analyzes sniffed MACs macprocess 1 1 MAC analyzer loop
rmcd_process 1 1 Remote command interpreter loop
IDLE 1 0 ESP32 arduino scheduler -> runs wifi channel rotator IDLE 1 0 ESP32 arduino scheduler -> runs wifi channel rotator
Low priority numbers denote low priority tasks. Low priority numbers denote low priority tasks.
@ -60,8 +61,10 @@ irqHandlerTask (Core 1), see irqhandler.cpp
fired by hardware fired by hardware
DisplayIRQ -> esp32 timer 0 DisplayIRQ -> esp32 timer 0
ButtonIRQ -> external gpio CLOCKIRQ -> esp32 timer 1 or external GPIO (RTC_INT or GPS_INT)
PMUIRQ -> PMU chip gpio MatrixDisplayIRQ-> esp32 timer 3
ButtonIRQ -> external GPIO
PMUIRQ -> PMU chip GPIO
fired by software (Ticker.h) fired by software (Ticker.h)
TIMESYNC_IRQ -> setTimeSyncIRQ() TIMESYNC_IRQ -> setTimeSyncIRQ()
@ -100,7 +103,7 @@ timesource_t timeSource = _unsynced;
// container holding unique MAC address hashes with Memory Alloctor using PSRAM, // container holding unique MAC address hashes with Memory Alloctor using PSRAM,
// if present // if present
std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs; DRAM_ATTR std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
// initialize payload encoder // initialize payload encoder
PayloadConvert payload(PAYLOAD_BUFFER_SIZE); PayloadConvert payload(PAYLOAD_BUFFER_SIZE);
@ -291,6 +294,10 @@ void setup() {
ESP_LOGI(TAG, "Starting MAC processor..."); ESP_LOGI(TAG, "Starting MAC processor...");
macQueueInit(); macQueueInit();
// start rcommand processing task
ESP_LOGI(TAG, "Starting rcommand interpreter...");
rcmd_init();
// start BLE scan callback if BLE function is enabled in NVRAM configuration // start BLE scan callback if BLE function is enabled in NVRAM configuration
// or remove bluetooth stack from RAM, if option bluetooth is not compiled // or remove bluetooth stack from RAM, if option bluetooth is not compiled
#if (BLECOUNTER) #if (BLECOUNTER)
@ -428,7 +435,7 @@ void setup() {
// initialize salt value using esp_random() called by random() in // initialize salt value using esp_random() called by random() in
// arduino-esp32 core. Note: do this *after* wifi has started, since // arduino-esp32 core. Note: do this *after* wifi has started, since
// function gets it's seed from RF noise // function gets it's seed from RF noise
get_salt(); // get new 16bit for salting hashes reset_counters();
// start state machine // start state machine
ESP_LOGI(TAG, "Starting Interrupt Handler..."); ESP_LOGI(TAG, "Starting Interrupt Handler...");
@ -451,8 +458,10 @@ void setup() {
#endif #endif
if (bme_init()) if (bme_init())
ESP_LOGI(TAG, "BME sensor initialized"); ESP_LOGI(TAG, "BME sensor initialized");
else else {
ESP_LOGE(TAG, "BME sensor could not be initialized"); ESP_LOGE(TAG, "BME sensor could not be initialized");
cfg.payloadmask &= ~MEMS_DATA; // switch off transmit of BME data
}
#endif #endif
// starting timers and interrupts // starting timers and interrupts

View File

@ -4,7 +4,7 @@
static const char TAG[] = __FILE__; static const char TAG[] = __FILE__;
QueueHandle_t MQTTSendQueue; static QueueHandle_t MQTTSendQueue;
TaskHandle_t mqttTask; TaskHandle_t mqttTask;
Ticker mqttTimer; Ticker mqttTimer;
@ -12,6 +12,7 @@ WiFiClient netClient;
MQTTClient mqttClient; MQTTClient mqttClient;
void mqtt_deinit(void) { void mqtt_deinit(void) {
mqttClient.unsubscribe(MQTT_INTOPIC);
mqttClient.onMessageAdvanced(NULL); mqttClient.onMessageAdvanced(NULL);
mqttClient.disconnect(); mqttClient.disconnect();
vTaskDelete(mqttTask); vTaskDelete(mqttTask);
@ -19,12 +20,10 @@ void mqtt_deinit(void) {
esp_err_t mqtt_init(void) { esp_err_t mqtt_init(void) {
// setup network connection // setup network connection and MQTT client
WiFi.onEvent(NetworkEvent);
ETH.begin(); ETH.begin();
// setup mqtt client
mqttClient.begin(MQTT_SERVER, MQTT_PORT, netClient); mqttClient.begin(MQTT_SERVER, MQTT_PORT, netClient);
mqttClient.setKeepAlive(MQTT_KEEPALIVE);
mqttClient.onMessageAdvanced(mqtt_callback); mqttClient.onMessageAdvanced(mqtt_callback);
_ASSERT(SEND_QUEUE_SIZE > 0); _ASSERT(SEND_QUEUE_SIZE > 0);
@ -37,15 +36,20 @@ esp_err_t mqtt_init(void) {
SEND_QUEUE_SIZE * PAYLOAD_BUFFER_SIZE); SEND_QUEUE_SIZE * PAYLOAD_BUFFER_SIZE);
ESP_LOGI(TAG, "Starting MQTTloop..."); ESP_LOGI(TAG, "Starting MQTTloop...");
xTaskCreate(mqtt_client_task, "mqttloop", 4096, (void *)NULL, 1, &mqttTask); xTaskCreatePinnedToCore(mqtt_client_task, "mqttloop", 4096, (void *)NULL, 1,
&mqttTask, 1);
return ESP_OK; return ESP_OK;
} }
int mqtt_connect(const char *my_host, const uint16_t my_port) { int mqtt_connect(const char *my_host, const uint16_t my_port) {
IPAddress mqtt_server_ip; IPAddress mqtt_server_ip;
uint8_t mac[6];
char clientId[20];
static String clientId = "paxcounter-" + ETH.macAddress(); // hash 6 byte MAC to 4 byte hash
esp_eth_get_mac(mac);
const uint32_t hashedmac = hash((const char *)mac, 6);
snprintf(clientId, 20, "paxcounter_%08x", hashedmac);
ESP_LOGI(TAG, "MQTT name is %s", MQTT_CLIENTNAME); ESP_LOGI(TAG, "MQTT name is %s", MQTT_CLIENTNAME);
@ -75,41 +79,6 @@ int mqtt_connect(const char *my_host, const uint16_t my_port) {
return 0; return 0;
} }
void NetworkEvent(WiFiEvent_t event) {
switch (event) {
case SYSTEM_EVENT_ETH_START:
case SYSTEM_EVENT_STA_START:
ESP_LOGI(TAG, "Network link layer started");
// ETH.setHostname(ETH.macAddress().c_str());
break;
case SYSTEM_EVENT_ETH_STOP:
case SYSTEM_EVENT_STA_STOP:
ESP_LOGI(TAG, "Network link layer stopped");
break;
case SYSTEM_EVENT_ETH_CONNECTED:
case SYSTEM_EVENT_STA_CONNECTED:
ESP_LOGI(TAG, "Network link connected");
break;
case SYSTEM_EVENT_ETH_DISCONNECTED:
case SYSTEM_EVENT_STA_DISCONNECTED:
ESP_LOGI(TAG, "Network link disconnected");
break;
case SYSTEM_EVENT_ETH_GOT_IP:
ESP_LOGI(TAG, "IP: %s", ETH.localIP().toString().c_str());
ESP_LOGI(TAG, "Link Speed: %d Mbps %s", ETH.linkSpeed(),
ETH.fullDuplex() ? "full duplex" : "half duplex");
mqtt_connect(MQTT_SERVER, MQTT_PORT);
break;
case SYSTEM_EVENT_STA_GOT_IP:
ESP_LOGI(TAG, "IP: %s", WiFi.localIP().toString().c_str());
mqtt_connect(MQTT_SERVER, MQTT_PORT);
break;
default:
break;
}
}
void mqtt_client_task(void *param) { void mqtt_client_task(void *param) {
MessageBuffer_t msg; MessageBuffer_t msg;
@ -128,21 +97,28 @@ void mqtt_client_task(void *param) {
MQTT_KEEPALIVE * 1000 / portTICK_PERIOD_MS) != pdTRUE) MQTT_KEEPALIVE * 1000 / portTICK_PERIOD_MS) != pdTRUE)
continue; continue;
// send data to mqtt server // prepare mqtt topic
char buffer[PAYLOAD_BUFFER_SIZE + 3]; char topic[16];
snprintf(buffer, msg.MessageSize + 3, "%u/%s", msg.MessagePort, snprintf(topic, 16, "%s/%u", MQTT_OUTTOPIC, msg.MessagePort);
msg.Message); size_t out_len = 0;
if (mqttClient.publish(MQTT_OUTTOPIC, buffer)) { // get length of base64 encoded message
ESP_LOGI(TAG, "%d byte(s) sent to MQTT server", msg.MessageSize + 2); mbedtls_base64_encode(NULL, 0, &out_len, (unsigned char *)msg.Message,
// delete sent item from queue msg.MessageSize);
// base64 encode the message
unsigned char encoded[out_len];
mbedtls_base64_encode(encoded, out_len, &out_len,
(unsigned char *)msg.Message, msg.MessageSize);
// send encoded message to mqtt server and delete it from queue
if (mqttClient.publish(topic, (const char *)encoded, out_len)) {
ESP_LOGD(TAG, "%u bytes sent to MQTT server", out_len);
xQueueReceive(MQTTSendQueue, &msg, (TickType_t)0); xQueueReceive(MQTTSendQueue, &msg, (TickType_t)0);
} else } else
ESP_LOGD(TAG, "Couldn't sent message to MQTT server"); ESP_LOGD(TAG, "Couldn't sent message to MQTT server");
} else { } else {
// attempt to reconnect to MQTT server // attempt to reconnect to MQTT server
ESP_LOGD(TAG, "MQTT error = %d / rc = %d", mqttClient.lastError(),
mqttClient.returnCode());
ESP_LOGD(TAG, "MQTT client reconnecting..."); ESP_LOGD(TAG, "MQTT client reconnecting...");
delay(MQTT_RETRYSEC * 1000); delay(MQTT_RETRYSEC * 1000);
mqtt_connect(MQTT_SERVER, MQTT_PORT); mqtt_connect(MQTT_SERVER, MQTT_PORT);
@ -150,16 +126,27 @@ void mqtt_client_task(void *param) {
} // while (1) } // while (1)
} }
void mqtt_enqueuedata(MessageBuffer_t *message) { // process incoming MQTT messages
// enqueue message in MQTT send queue void mqtt_callback(MQTTClient *client, char *topic, char *payload, int length) {
if (xQueueSendToBack(MQTTSendQueue, (void *)message, (TickType_t)0) != pdTRUE) if (strcmp(topic, MQTT_INTOPIC) == 0) {
ESP_LOGW(TAG, "MQTT sendqueue is full");
// get length of base64 encoded message
size_t out_len = 0;
mbedtls_base64_decode(NULL, 0, &out_len, (unsigned char *)payload, length);
// decode the base64 message
unsigned char decoded[out_len];
mbedtls_base64_decode(decoded, out_len, &out_len, (unsigned char *)payload,
length);
rcommand(decoded, out_len);
}
} }
void mqtt_callback(MQTTClient *client, char topic[], char payload[], // enqueue outgoing messages in MQTT send queue
int length) { void mqtt_enqueuedata(MessageBuffer_t *message) {
if (strcmp(topic, MQTT_INTOPIC) == 0) if (xQueueSendToBack(MQTTSendQueue, (void *)message, (TickType_t)0) != pdTRUE)
rcommand((const uint8_t *)payload, (const uint8_t)length); ESP_LOGW(TAG, "MQTT sendqueue is full");
} }
void mqtt_queuereset(void) { xQueueReset(MQTTSendQueue); } void mqtt_queuereset(void) { xQueueReset(MQTTSendQueue); }

View File

@ -121,3 +121,15 @@
#define CAYENNE_DEVICECONFIG 11 // device period configuration #define CAYENNE_DEVICECONFIG 11 // device period configuration
#define CAYENNE_SENSORREAD 13 // sensor period configuration #define CAYENNE_SENSORREAD 13 // sensor period configuration
#define CAYENNE_SENSORENABLE 14 // sensor enable configuration #define CAYENNE_SENSORENABLE 14 // sensor enable configuration
// MQTT settings, only needed if MQTT is used (#define HAS_MQTT in board hal file)
#define MQTT_ETHERNET 0 // select PHY: set 0 for Wifi, 1 for ethernet
#define MQTT_INTOPIC "paxin"
#define MQTT_OUTTOPIC "paxout"
#define MQTT_PORT 1883
#define MQTT_SERVER "public.cloud.shiftr.io"
#define MQTT_USER "public"
#define MQTT_PASSWD "public"
#define MQTT_RETRYSEC 20 // retry reconnect every 20 seconds
#define MQTT_KEEPALIVE 10 // keep alive interval in seconds
//#define MQTT_CLIENTNAME "my_paxcounter" // generated by default

View File

@ -46,6 +46,14 @@ void AXP192_powerevent_IRQ(void) {
ESP_LOGI(TAG, "Battery high temperature."); ESP_LOGI(TAG, "Battery high temperature.");
if (pmu.isBattTempHighIRQ()) if (pmu.isBattTempHighIRQ())
ESP_LOGI(TAG, "Battery low temperature."); ESP_LOGI(TAG, "Battery low temperature.");
if (pmu.isLowVoltageLevel1IRQ()) {
ESP_LOGI(TAG, "Battery has reached voltage level 1.");
pmu.setChgLEDMode(AXP20X_LED_BLINK_4HZ);
}
if (pmu.isLowVoltageLevel2IRQ()) {
ESP_LOGI(TAG, "Battery has reached voltage level 2.");
pmu.setChgLEDMode(AXP20X_LED_BLINK_1HZ);
}
// short press -> esp32 deep sleep mode, can be exited by pressing user button // short press -> esp32 deep sleep mode, can be exited by pressing user button
if (pmu.isPEKShortPressIRQ()) { if (pmu.isPEKShortPressIRQ()) {
@ -129,10 +137,15 @@ void AXP192_init(void) {
pmu.setLDO2Voltage(3300); // LORA VDD 3v3 pmu.setLDO2Voltage(3300); // LORA VDD 3v3
pmu.setLDO3Voltage(3300); // GPS VDD 3v3 pmu.setLDO3Voltage(3300); // GPS VDD 3v3
// configure voltage warning levels
pmu.setVWarningLevel1(3600);
pmu.setVWarningLevel2(3800);
pmu.setPowerDownVoltage(3300);
// configure PEK button settings // configure PEK button settings
pmu.setTimeOutShutdown(false); // forced shutdown by PEK enabled pmu.setTimeOutShutdown(false); // forced shutdown by PEK enabled
pmu.setShutdownTime( pmu.setShutdownTime(
AXP_POWER_OFF_TIME_65); // 6 sec button press for shutdown AXP_POWER_OFF_TIME_6S); // 6 sec button press for shutdown
pmu.setlongPressTime( pmu.setlongPressTime(
AXP_LONGPRESS_TIME_1S5); // 1.5 sec button press for long press AXP_LONGPRESS_TIME_1S5); // 1.5 sec button press for long press
pmu.setStartupTime( pmu.setStartupTime(
@ -158,9 +171,9 @@ void AXP192_init(void) {
#endif // PMU_INT #endif // PMU_INT
// set charging parameterss according to user settings if we have (see power.h) // set charging parameterss according to user settings if we have (see power.h)
#ifdef PMU_CHARGE_CURRENT #ifdef PMU_CHG_CURRENT
pmu.setChargeControlCur(PMU_CHARGE_CURRENT); pmu.setChargeControlCur(PMU_CHG_CURRENT);
pmu.setChargingTargetVoltage(PMU_CHARGE_CUTOFF); pmu.setChargingTargetVoltage(PMU_CHG_CUTOFF);
pmu.enableChargeing(true); pmu.enableChargeing(true);
#endif #endif
@ -251,10 +264,11 @@ uint8_t read_battlevel(mapFn_t mapFunction) {
bool batt_sufficient() { bool batt_sufficient() {
#if (defined HAS_PMU || defined BAT_MEASURE_ADC || defined HAS_IP5306) #if (defined HAS_PMU || defined BAT_MEASURE_ADC || defined HAS_IP5306)
if (batt_level) // we have a battery voltage
return (batt_level > OTA_MIN_BATT); return (batt_level > OTA_MIN_BATT);
#else else
return true; // we don't know batt level
#endif #endif
return true; // we don't know batt level
} }
#ifdef HAS_IP5306 #ifdef HAS_IP5306

View File

@ -5,8 +5,8 @@
// Local logging tag // Local logging tag
static const char TAG[] = __FILE__; static const char TAG[] = __FILE__;
// global variable indicating if rcommand() is executing static QueueHandle_t RcmdQueue;
bool rcmd_busy = false; TaskHandle_t rcmdTask;
// set of functions that can be triggered by remote commands // set of functions that can be triggered by remote commands
void set_reset(uint8_t val[]) { void set_reset(uint8_t val[]) {
@ -18,7 +18,6 @@ void set_reset(uint8_t val[]) {
case 1: // reset MAC counter case 1: // reset MAC counter
ESP_LOGI(TAG, "Remote command: reset MAC counter"); ESP_LOGI(TAG, "Remote command: reset MAC counter");
reset_counters(); // clear macs reset_counters(); // clear macs
get_salt(); // get new salt
break; break;
case 2: // reset device to factory settings case 2: // reset device to factory settings
ESP_LOGI(TAG, "Remote command: reset device to factory settings"); ESP_LOGI(TAG, "Remote command: reset device to factory settings");
@ -35,7 +34,11 @@ void set_reset(uint8_t val[]) {
case 9: // reset and ask for software update via Wifi OTA case 9: // reset and ask for software update via Wifi OTA
ESP_LOGI(TAG, "Remote command: software update via Wifi"); ESP_LOGI(TAG, "Remote command: software update via Wifi");
#if (USE_OTA) #if (USE_OTA)
// check power status before scheduling ota update
if (batt_sufficient())
RTC_runmode = RUNMODE_UPDATE; RTC_runmode = RUNMODE_UPDATE;
else
ESP_LOGE(TAG, "Battery level %d%% is too low for OTA", batt_level);
#endif // USE_OTA #endif // USE_OTA
break; break;
@ -115,7 +118,6 @@ void set_countmode(uint8_t val[]) {
return; return;
} }
reset_counters(); // clear macs reset_counters(); // clear macs
get_salt(); // get new salt
} }
void set_screensaver(uint8_t val[]) { void set_screensaver(uint8_t val[]) {
@ -164,7 +166,7 @@ void set_payloadmask(uint8_t val[]) {
void set_sensor(uint8_t val[]) { void set_sensor(uint8_t val[]) {
#if (HAS_SENSORS) #if (HAS_SENSORS)
switch (val[0]) { // check if valid sensor number 1...4 switch (val[0]) { // check if valid sensor number 1..3
case 1: case 1:
case 2: case 2:
case 3: case 3:
@ -367,41 +369,49 @@ void set_enscount(uint8_t val[]) {
cfg.payloadmask &= ~SENSOR1_DATA; cfg.payloadmask &= ~SENSOR1_DATA;
} }
void set_loadconfig(uint8_t val[]) {
ESP_LOGI(TAG, "Remote command: load config from NVRAM");
loadConfig();
};
void set_saveconfig(uint8_t val[]) {
ESP_LOGI(TAG, "Remote command: save config to NVRAM");
saveConfig(false);
};
// assign previously defined functions to set of numeric remote commands // assign previously defined functions to set of numeric remote commands
// format: opcode, function, #bytes params, // format: {opcode, function, number of function arguments}
// flag (true = do make settings persistent / false = don't)
//
static const cmd_t table[] = { static const cmd_t table[] = {
{0x01, set_rssi, 1, true}, {0x02, set_countmode, 1, true}, {0x01, set_rssi, 1}, {0x02, set_countmode, 1},
{0x03, set_gps, 1, true}, {0x04, set_display, 1, true}, {0x03, set_gps, 1}, {0x04, set_display, 1},
{0x05, set_loradr, 1, true}, {0x06, set_lorapower, 1, true}, {0x05, set_loradr, 1}, {0x06, set_lorapower, 1},
{0x07, set_loraadr, 1, true}, {0x08, set_screensaver, 1, true}, {0x07, set_loraadr, 1}, {0x08, set_screensaver, 1},
{0x09, set_reset, 1, false}, {0x0a, set_sendcycle, 1, true}, {0x09, set_reset, 1}, {0x0a, set_sendcycle, 1},
{0x0b, set_wifichancycle, 1, true}, {0x0c, set_blescantime, 1, true}, {0x0b, set_wifichancycle, 1}, {0x0c, set_blescantime, 1},
{0x0d, set_macfilter, 1, false}, {0x0e, set_blescan, 1, true}, {0x0d, set_macfilter, 1}, {0x0e, set_blescan, 1},
{0x0f, set_wifiant, 1, true}, {0x10, set_rgblum, 1, true}, {0x0f, set_wifiant, 1}, {0x10, set_rgblum, 1},
{0x11, set_monitor, 1, true}, {0x12, set_beacon, 7, false}, {0x11, set_monitor, 1}, {0x12, set_beacon, 7},
{0x13, set_sensor, 2, true}, {0x14, set_payloadmask, 1, true}, {0x13, set_sensor, 2}, {0x14, set_payloadmask, 1},
{0x15, set_bme, 1, true}, {0x16, set_batt, 1, true}, {0x15, set_bme, 1}, {0x16, set_batt, 1},
{0x17, set_wifiscan, 1, true}, {0x18, set_enscount, 1, true}, {0x17, set_wifiscan, 1}, {0x18, set_enscount, 1},
{0x19, set_sleepcycle, 1, true}, {0x80, get_config, 0, false}, {0x19, set_sleepcycle, 1}, {0x20, set_loadconfig, 0},
{0x81, get_status, 0, false}, {0x83, get_batt, 0, false}, {0x21, set_saveconfig, 0}, {0x80, get_config, 0},
{0x84, get_gps, 0, false}, {0x85, get_bme, 0, false}, {0x81, get_status, 0}, {0x83, get_batt, 0},
{0x86, get_time, 0, false}, {0x87, set_time, 0, false}, {0x84, get_gps, 0}, {0x85, get_bme, 0},
{0x99, set_flush, 0, false}}; {0x86, get_time, 0}, {0x87, set_time, 0},
{0x99, set_flush, 0}};
static const uint8_t cmdtablesize = static const uint8_t cmdtablesize =
sizeof(table) / sizeof(table[0]); // number of commands in command table sizeof(table) / sizeof(table[0]); // number of commands in command table
// check and execute remote command // check and execute remote command
void rcommand(const uint8_t cmd[], const uint8_t cmdlength) { void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) {
if (cmdlength == 0) if (cmdlength == 0)
return; return;
uint8_t foundcmd[cmdlength], cursor = 0; uint8_t foundcmd[cmdlength], cursor = 0;
bool storeflag = false;
rcmd_busy = true;
while (cursor < cmdlength) { while (cursor < cmdlength) {
@ -413,8 +423,6 @@ void rcommand(const uint8_t cmd[], const uint8_t cmdlength) {
memmove(foundcmd, cmd + cursor, memmove(foundcmd, cmd + cursor,
table[i].params); // strip opcode from cmd array table[i].params); // strip opcode from cmd array
cursor += table[i].params; cursor += table[i].params;
if (table[i].store) // ceck if function needs to store configuration
storeflag = true;
table[i].func( table[i].func(
foundcmd); // execute assigned function with given parameters foundcmd); // execute assigned function with given parameters
} else } else
@ -425,15 +433,72 @@ void rcommand(const uint8_t cmd[], const uint8_t cmdlength) {
break; // command found -> exit table lookup loop break; // command found -> exit table lookup loop
} // end of command validation } // end of command validation
} // end of command table lookup loop } // end of command table lookup loop
if (i < 0) { // command not found -> exit parser if (i < 0) { // command not found -> exit parser
ESP_LOGI(TAG, "Unknown remote command x%02X, ignored", cmd[cursor]); ESP_LOGI(TAG, "Unknown remote command x%02X, ignored", cmd[cursor]);
break; break;
} }
} // command parsing loop } // command parsing loop
if (storeflag) } // rcmd_execute()
saveConfig();
rcmd_busy = false; // remote command processing task
void rcmd_process(void *pvParameters) {
_ASSERT((uint32_t)pvParameters == 1); // FreeRTOS check
RcmdBuffer_t RcmdBuffer;
while (1) {
// fetch next or wait for incoming rcommand from queue
if (xQueueReceive(RcmdQueue, &RcmdBuffer, portMAX_DELAY) != pdTRUE) {
ESP_LOGE(TAG, "Premature return from xQueueReceive() with no data!");
continue;
}
rcmd_execute(RcmdBuffer.cmd, RcmdBuffer.cmdLen);
}
delay(2); // yield to CPU
} // rcmd_process()
// enqueue remote command
void IRAM_ATTR rcommand(const uint8_t *cmd, const size_t cmdlength) {
RcmdBuffer_t rcmd = {0};
rcmd.cmdLen = cmdlength;
memcpy(rcmd.cmd, cmd, cmdlength);
if (xQueueSendToBack(RcmdQueue, (void *)&rcmd, (TickType_t)0) != pdTRUE)
ESP_LOGW(TAG, "Remote command queue is full");
} // rcommand() } // rcommand()
void rcmd_queuereset(void) { xQueueReset(RcmdQueue); }
uint32_t rcmd_queuewaiting(void) { return uxQueueMessagesWaiting(RcmdQueue); }
void rcmd_deinit(void) {
rcmd_queuereset();
vTaskDelete(rcmdTask);
}
esp_err_t rcmd_init(void) {
_ASSERT(RCMD_QUEUE_SIZE > 0);
RcmdQueue = xQueueCreate(RCMD_QUEUE_SIZE, sizeof(RcmdBuffer_t));
if (RcmdQueue == 0) {
ESP_LOGE(TAG, "Could not create rcommand send queue. Aborting.");
return ESP_FAIL;
}
ESP_LOGI(TAG, "Rcommand send queue created, size %d Bytes",
RCMD_QUEUE_SIZE * sizeof(RcmdBuffer_t));
xTaskCreatePinnedToCore(rcmd_process, // task function
"rcmdloop", // name of task
3072, // stack size of task
(void *)1, // parameter of the task
1, // priority of the task
&rcmdTask, // task handle
1); // CPU core
return ESP_OK;
} // rcmd_init()

View File

@ -9,7 +9,7 @@ static const char TAG[] = __FILE__;
#define uS_TO_S_FACTOR 1000000ULL #define uS_TO_S_FACTOR 1000000ULL
// variables keep its values after a wakeup from sleep // variables keep its values after a wakeup from sleep
RTC_DATA_ATTR runmode_t RTC_runmode = RUNMODE_POWERCYCLE; RTC_NOINIT_ATTR runmode_t RTC_runmode = RUNMODE_POWERCYCLE;
RTC_DATA_ATTR struct timeval RTC_sleep_start_time; RTC_DATA_ATTR struct timeval RTC_sleep_start_time;
RTC_DATA_ATTR unsigned long long RTC_millis = 0; RTC_DATA_ATTR unsigned long long RTC_millis = 0;
timeval sleep_stop_time; timeval sleep_stop_time;
@ -36,14 +36,19 @@ void do_after_reset(void) {
struct timeval sleep_stop_time; struct timeval sleep_stop_time;
uint64_t sleep_time_ms; uint64_t sleep_time_ms;
switch (esp_sleep_get_wakeup_cause()) { switch (rtc_get_reset_reason(0)) {
case ESP_SLEEP_WAKEUP_EXT0: // Wakeup caused by external signal using RTC_IO
case ESP_SLEEP_WAKEUP_EXT1: // Wakeup caused by external signal using
// RTC_CNTL
case ESP_SLEEP_WAKEUP_TIMER: // Wakeup caused by timer
case ESP_SLEEP_WAKEUP_TOUCHPAD: // Wakeup caused by touchpad
case ESP_SLEEP_WAKEUP_ULP: // Wakeup caused by ULP program
case POWERON_RESET: // 0x01 Vbat power on reset
case RTCWDT_BROWN_OUT_RESET: // 0x0f Reset when the vdd voltage is not
// stable
RTC_runmode = RUNMODE_POWERCYCLE;
break;
case SW_CPU_RESET: // 0x0c Software reset CPU
// keep previous runmode (could be RUNMODE_UPDATE)
break;
case DEEPSLEEP_RESET: // 0x05 Deep Sleep reset digital core
// calculate time spent in deep sleep // calculate time spent in deep sleep
gettimeofday(&sleep_stop_time, NULL); gettimeofday(&sleep_stop_time, NULL);
sleep_time_ms = sleep_time_ms =
@ -51,48 +56,46 @@ void do_after_reset(void) {
(sleep_stop_time.tv_usec - RTC_sleep_start_time.tv_usec) / 1000; (sleep_stop_time.tv_usec - RTC_sleep_start_time.tv_usec) / 1000;
ESP_LOGI(TAG, "Time spent in deep sleep: %d ms", sleep_time_ms); ESP_LOGI(TAG, "Time spent in deep sleep: %d ms", sleep_time_ms);
RTC_millis += sleep_time_ms; // increment system monotonic time RTC_millis += sleep_time_ms; // increment system monotonic time
// set wakeup state, not if we have pending OTA update
if (RTC_runmode == RUNMODE_SLEEP)
RTC_runmode = RUNMODE_WAKEUP; RTC_runmode = RUNMODE_WAKEUP;
break; break;
case ESP_SLEEP_WAKEUP_ALL: case SW_RESET: // 0x03 Software reset digital core
case ESP_SLEEP_WAKEUP_GPIO: case OWDT_RESET: // 0x04 Legacy watch dog reset digital core
case ESP_SLEEP_WAKEUP_UART: case SDIO_RESET: // 0x06 Reset by SLC module, reset digital core
case ESP_SLEEP_WAKEUP_UNDEFINED: case TG0WDT_SYS_RESET: // 0x07 Timer Group0 Watch dog reset digital core
case TG1WDT_SYS_RESET: // 0x08 Timer Group1 Watch dog reset digital core
case RTCWDT_SYS_RESET: // 0x09 RTC Watch dog Reset digital core
case INTRUSION_RESET: // 0x0a Instrusion tested to reset CPU
case TGWDT_CPU_RESET: // 0x0b Time Group reset CPU
case RTCWDT_CPU_RESET: // 0x0d RTC Watch dog Reset CPU
case EXT_CPU_RESET: // 0x0e for APP CPU, reseted by PRO CPU
case RTCWDT_RTC_RESET: // 0x10 RTC Watch dog reset digital core and rtc mode
default: default:
// not a deep sleep reset
RTC_runmode = RUNMODE_POWERCYCLE; RTC_runmode = RUNMODE_POWERCYCLE;
break; break;
} // switch }
ESP_LOGI(TAG, "Starting Software v%s, runmode %s", PROGVERSION, ESP_LOGI(TAG, "Starting Software v%s, runmode %s", PROGVERSION,
runmode[RTC_runmode]); runmode[RTC_runmode]);
} }
void enter_deepsleep(const uint64_t wakeup_sec = 60, void enter_deepsleep(const uint64_t wakeup_sec, gpio_num_t wakeup_gpio) {
gpio_num_t wakeup_gpio = GPIO_NUM_MAX) {
#if (HAS_LORA) ESP_LOGI(TAG, "Preparing to sleep...");
if (!LMIC.devaddr) {
ESP_LOGI(TAG, "Can't go to sleep while joining");
return;
}
#endif
RTC_runmode = RUNMODE_SLEEP;
int i; int i;
// validate wake up pin, if we have // validate wake up pin, if we have
if (!GPIO_IS_VALID_GPIO(wakeup_gpio)) if (!GPIO_IS_VALID_GPIO(wakeup_gpio))
wakeup_gpio = GPIO_NUM_MAX; wakeup_gpio = GPIO_NUM_MAX;
ESP_LOGI(TAG, "Preparing to sleep...");
RTC_runmode = RUNMODE_SLEEP;
// stop further enqueuing of senddata and MAC processing // stop further enqueuing of senddata and MAC processing
sendTimer.detach(); sendTimer.detach();
// switch off radio // switch off radio and other power consuming hardware
#if (WIFICOUNTER) #if (WIFICOUNTER)
switch_wifi_sniffer(0); switch_wifi_sniffer(0);
#endif #endif
@ -100,6 +103,9 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
stop_BLEscan(); stop_BLEscan();
btStop(); btStop();
#endif #endif
#if (HAS_SDS011)
sds011_sleep(void);
#endif
// stop MAC processing // stop MAC processing
vTaskDelete(macProcessTask); vTaskDelete(macProcessTask);
@ -109,27 +115,22 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
// wait a while (max 100 sec) to clear send queues // wait a while (max 100 sec) to clear send queues
ESP_LOGI(TAG, "Waiting until send queues are empty..."); ESP_LOGI(TAG, "Waiting until send queues are empty...");
for (i = 10; i > 0; i--) { for (i = 100; i > 0; i--) {
if (!allQueuesEmtpy()) if (allQueuesEmtpy())
vTaskDelay(pdMS_TO_TICKS(10000));
else
break; break;
vTaskDelay(pdMS_TO_TICKS(1000));
} }
if (i == 0)
goto Error;
// shutdown LMIC safely, waiting max 100 sec // shutdown LMIC safely, waiting max 100 sec
#if (HAS_LORA) #if (HAS_LORA)
ESP_LOGI(TAG, "Waiting until LMIC is idle..."); ESP_LOGI(TAG, "Waiting until LMIC is idle...");
for (i = 10; i > 0; i--) { for (i = 100; i > 0; i--) {
if ((LMIC.opmode & OP_TXRXPEND) || if ((LMIC.opmode & OP_TXRXPEND) ||
os_queryTimeCriticalJobs(sec2osticks(wakeup_sec))) os_queryTimeCriticalJobs(sec2osticks(wakeup_sec)))
vTaskDelay(pdMS_TO_TICKS(10000)); vTaskDelay(pdMS_TO_TICKS(1000));
else else
break; break;
} }
if (i == 0)
goto Error;
#endif // (HAS_LORA) #endif // (HAS_LORA)
// shutdown MQTT safely // shutdown MQTT safely
@ -142,17 +143,7 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
spi_deinit(); spi_deinit();
#endif #endif
// wait until rcommands are all done // save LMIC state to RTC RAM
for (i = 10; i > 0; i--) {
if (rcmd_busy)
vTaskDelay(pdMS_TO_TICKS(1000));
else
break;
}
if (i == 0)
goto Error;
// save LMIC state to RTC RAM
#if (HAS_LORA) #if (HAS_LORA)
SaveLMICToRTC(wakeup_sec); SaveLMICToRTC(wakeup_sec);
#endif // (HAS_LORA) #endif // (HAS_LORA)
@ -162,9 +153,11 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
dp_shutdown(); dp_shutdown();
#endif #endif
// reduce power if has PMU // reduce power if has PMU or VEXT
#ifdef HAS_PMU #ifdef HAS_PMU
AXP192_power(pmu_power_sleep); AXP192_power(pmu_power_sleep);
#elif EXT_POWER_SW
digitalWrite(EXT_POWER_SW, EXT_POWER_OFF);
#endif #endif
// shutdown i2c bus // shutdown i2c bus
@ -189,10 +182,6 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
RTC_millis += millis(); RTC_millis += millis();
ESP_LOGI(TAG, "Going to sleep, good bye."); ESP_LOGI(TAG, "Going to sleep, good bye.");
esp_deep_sleep_start(); esp_deep_sleep_start();
Error:
ESP_LOGE(TAG, "Can't go to sleep. Resetting.");
do_reset(true);
} }
unsigned long long uptime() { return (RTC_millis + millis()); } unsigned long long uptime() { return (RTC_millis + millis()); }

View File

@ -4,7 +4,7 @@
Ticker sendTimer; Ticker sendTimer;
void setSendIRQ() { void setSendIRQ() {
xTaskNotifyFromISR(irqHandlerTask, SENDCYCLE_IRQ, eSetBits, NULL); xTaskNotify(irqHandlerTask, SENDCYCLE_IRQ, eSetBits);
} }
// put data to send in RTos Queues used for transmit over channels Lora and SPI // put data to send in RTos Queues used for transmit over channels Lora and SPI
@ -12,8 +12,7 @@ void SendPayload(uint8_t port) {
ESP_LOGD(TAG, "sending Payload for Port %d", port); ESP_LOGD(TAG, "sending Payload for Port %d", port);
MessageBuffer_t MessageBuffer_t SendBuffer; // contains MessageSize, MessagePort, Message[]
SendBuffer; // contains MessageSize, MessagePort, Message[]
SendBuffer.MessageSize = payload.getSize(); SendBuffer.MessageSize = payload.getSize();
@ -115,7 +114,6 @@ void sendData() {
// clear counter if not in cumulative counter mode // clear counter if not in cumulative counter mode
if (cfg.countermode != 1) { if (cfg.countermode != 1) {
reset_counters(); // clear macs container and reset all counters reset_counters(); // clear macs container and reset all counters
get_salt(); // get new salt for salting hashes
ESP_LOGI(TAG, "Counter cleared"); ESP_LOGI(TAG, "Counter cleared");
} }
#ifdef HAS_DISPLAY #ifdef HAS_DISPLAY
@ -191,6 +189,7 @@ void sendData() {
} // sendData() } // sendData()
void flushQueues(void) { void flushQueues(void) {
rcmd_queuereset();
#if (HAS_LORA) #if (HAS_LORA)
lora_queuereset(); lora_queuereset();
#endif #endif
@ -203,7 +202,7 @@ void flushQueues(void) {
} }
bool allQueuesEmtpy(void) { bool allQueuesEmtpy(void) {
uint32_t rc = 0; uint32_t rc = rcmd_queuewaiting();
#if (HAS_LORA) #if (HAS_LORA)
rc += lora_queuewaiting(); rc += lora_queuewaiting();
#endif #endif

View File

@ -43,7 +43,7 @@ static const char TAG[] = __FILE__;
DMA_ATTR uint8_t txbuf[BUFFER_SIZE]; DMA_ATTR uint8_t txbuf[BUFFER_SIZE];
DMA_ATTR uint8_t rxbuf[BUFFER_SIZE]; DMA_ATTR uint8_t rxbuf[BUFFER_SIZE];
QueueHandle_t SPISendQueue; static QueueHandle_t SPISendQueue;
TaskHandle_t spiTask; TaskHandle_t spiTask;

View File

@ -109,8 +109,9 @@ void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec,
_seconds(), timeSetSymbols[mytimesource]); _seconds(), timeSetSymbols[mytimesource]);
} else { } else {
timesyncer.attach(TIME_SYNC_INTERVAL_RETRY * 60, setTimeSyncIRQ); timesyncer.attach(TIME_SYNC_INTERVAL_RETRY * 60, setTimeSyncIRQ);
ESP_LOGD(TAG, "[%0.3f] Timesync failed, invalid time fetched | source: %c", time_t unix_sec_at_compilation = compiledUTC();
_seconds(), timeSetSymbols[mytimesource]); ESP_LOGD(TAG, "[%0.3f] Failed to synchronise time from source %c | unix sec obtained from source: %d | unix sec at program compilation: %d",
_seconds(), timeSetSymbols[mytimesource], time_to_set, unix_sec_at_compilation);
} }
} }