Merge branch 'master-1.7.0-rc2' into development

This commit is contained in:
Verkehrsrot 2018-12-28 20:31:38 +01:00 committed by GitHub
commit ffab2f7743
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 97 additions and 84 deletions

View File

@ -24,5 +24,12 @@
// additional definitions for LMIC
#define LORA_IO1 (33)
#define LORA_IO2 LMIC_UNUSED_PIN
#define LORA_SCK (5)
#define LORA_MOSI (27)
#define LORA_MISO (19)
#define LORA_CS (18)
#define LORA_RST (14)
#define LORA_IRQ (26)
#endif

View File

@ -26,5 +26,11 @@
// additional definitions for LMIC
#define LORA_IO1 (35)
#define LORA_IO2 (34)
#define LORA_SCK (5)
#define LORA_MOSI (27)
#define LORA_MISO (19)
#define LORA_CS (18)
#define LORA_RST (14)
#define LORA_IRQ (26)
#endif

View File

@ -1,37 +1,37 @@
// clang-format off
#ifndef _LOPY_H
#define _LOPY_H
#include <stdint.h>
// Hardware related definitions for Pycom LoPy Board (NOT LoPy4)
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1272_radio 1
#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
#define LORA_IRQ (23)
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH (16) // pin for switching wifi antenna
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
// uncomment this only if your LoPy runs on a PYTRACK BOARD
#define HAS_GPS 1
#define GPS_I2C GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
#define GPS_ADDR 0x10
// uncomment this only if your LoPy runs on a EXPANSION BOARD
//#define HAS_LED (12) // use if LoPy is on Expansion Board, this has a user LED
//#define LED_ACTIVE_LOW 1 // use if LoPy is on Expansion Board, this has a user LED
//#define HAS_BUTTON (13) // user button on expansion board
//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
//#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
//#define BATT_FACTOR 2 // voltage divider 1MOhm/1MOhm -> expansion board 3.0
//#define BATT_FACTOR 4 // voltage divider 115kOhm/56kOhm -> expansion board 2.0
#endif
// clang-format off
#ifndef _LOPY_H
#define _LOPY_H
#include <stdint.h>
// Hardware related definitions for Pycom LoPy Board (NOT LoPy4)
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1272_radio 1
#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
#define LORA_IRQ (23)
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH (16) // pin for switching wifi antenna
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
// uncomment this only if your LoPy runs on a PYTRACK BOARD
#define HAS_GPS 1
#define GPS_I2C GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
#define GPS_ADDR 0x10
// uncomment this only if your LoPy runs on a EXPANSION BOARD
//#define HAS_LED (12) // use if LoPy is on Expansion Board, this has a user LED
//#define LED_ACTIVE_LOW 1 // use if LoPy is on Expansion Board, this has a user LED
//#define HAS_BUTTON (13) // user button on expansion board
//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
//#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
//#define BATT_FACTOR 2 // voltage divider 1MOhm/1MOhm -> expansion board 3.0
//#define BATT_FACTOR 4 // voltage divider 115kOhm/56kOhm -> expansion board 2.0
#endif

View File

@ -1,48 +1,48 @@
// clang-format off
#ifndef _LOPY4_H
#define _LOPY4_H
#include <stdint.h>
// Hardware related definitions for Pycom LoPy4 Board
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
//#defin HAS_SPI 1 // comment out if device shall not send data via SPI
// pin definitions for local wired SPI slave interface
//#define SPI_MOSI GPIO_NUM_22
//#define SPI_MISO GPIO_NUM_33
//#define SPI_SCLK GPIO_NUM_26
//#define SPI_CS GPIO_NUM_36
#define CFG_sx1276_radio 1
//#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0 (P2)
#define BOARD_HAS_PSRAM // use extra 4MB extern RAM
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
#define LORA_IRQ (23)
#define LORA_RST NOT_A_PIN
#define SS 18
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH (21) // pin for switching wifi antenna (P12)
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
// uncomment this only if your LoPy runs on a PYTRACK BOARD
//#define HAS_GPS 1
//#define GPS_I2C GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
//#define GPS_ADDR 0x10
// uncomment this only if your LoPy runs on a EXPANSION BOARD
#define HAS_LED (12) // use if LoPy is on Expansion Board, this has a user LED
#define LED_ACTIVE_LOW 1 // use if LoPy is on Expansion Board, this has a user LED
#define HAS_BUTTON (13) // user button on expansion board
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BATT_FACTOR 2 // voltage divider 1MOhm/1MOhm -> expansion board 3.0
//#define BATT_FACTOR 4 // voltage divider 115kOhm/56kOhm -> expansion board 2.0
// clang-format off
#ifndef _LOPY4_H
#define _LOPY4_H
#include <stdint.h>
// Hardware related definitions for Pycom LoPy4 Board
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
//#defin HAS_SPI 1 // comment out if device shall not send data via SPI
// pin definitions for local wired SPI slave interface
//#define SPI_MOSI GPIO_NUM_22
//#define SPI_MISO GPIO_NUM_33
//#define SPI_SCLK GPIO_NUM_26
//#define SPI_CS GPIO_NUM_36
#define CFG_sx1276_radio 1
//#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0 (P2)
#define BOARD_HAS_PSRAM // use extra 4MB extern RAM
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
#define LORA_IRQ (23)
#define LORA_RST NOT_A_PIN
#define SS 18
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH (21) // pin for switching wifi antenna (P12)
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
// uncomment this only if your LoPy runs on a PYTRACK BOARD
//#define HAS_GPS 1
//#define GPS_I2C GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
//#define GPS_ADDR 0x10
// uncomment this only if your LoPy runs on a EXPANSION BOARD
#define HAS_LED (12) // use if LoPy is on Expansion Board, this has a user LED
#define LED_ACTIVE_LOW 1 // use if LoPy is on Expansion Board, this has a user LED
#define HAS_BUTTON (13) // user button on expansion board
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BATT_FACTOR 2 // voltage divider 1MOhm/1MOhm -> expansion board 3.0
//#define BATT_FACTOR 4 // voltage divider 115kOhm/56kOhm -> expansion board 2.0
#endif