default to disable brownout detection

This commit is contained in:
Charles 2018-03-27 11:05:33 +02:00
parent 6e0ec1cb2a
commit ff85d908ac

View File

@ -1,15 +1,20 @@
// Hardware related definitions for lolin32 loraNode32 shield
// See https://github.com/hallard/LoLin32-Lora
// disable brownout detection (avoid unexpected reset on some boards)
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_LED NOT_A_PIN // Led os on same pin than Lora SS pin, to avoid pb, we don't use it
// Anyway shield if on tap board, so we won't be able to see this LED
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
#define CFG_sx1276_radio 1
#define HAS_LED NOT_A_PIN // Led os on same pin than Lora SS pin, to avoid pb, we don't use it
// Anyway shield is on over the LoLin32 board, so we won't be able to see this LED
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
#define CFG_sx1276_radio 1 // RFM95 module
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI 23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK 18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
@ -18,9 +23,10 @@
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 4 // ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO2 4 // ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
#define OLED_RST NOT_A_PIN // Not reset pin
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL
#define OLED_RST U8X8_PIN_NONE // Not reset pin
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL