default to disable brownout detection
This commit is contained in:
parent
6e0ec1cb2a
commit
ff85d908ac
@ -1,15 +1,20 @@
|
||||
// Hardware related definitions for lolin32 loraNode32 shield
|
||||
// See https://github.com/hallard/LoLin32-Lora
|
||||
|
||||
// disable brownout detection (avoid unexpected reset on some boards)
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
#define HAS_LED NOT_A_PIN // Led os on same pin than Lora SS pin, to avoid pb, we don't use it
|
||||
// Anyway shield if on tap board, so we won't be able to see this LED
|
||||
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||||
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||||
#define CFG_sx1276_radio 1
|
||||
#define HAS_LED NOT_A_PIN // Led os on same pin than Lora SS pin, to avoid pb, we don't use it
|
||||
// Anyway shield is on over the LoLin32 board, so we won't be able to see this LED
|
||||
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||||
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||||
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
|
||||
|
||||
#define CFG_sx1276_radio 1 // RFM95 module
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI 23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK 18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
@ -18,9 +23,10 @@
|
||||
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
||||
#define DIO2 4 // ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||||
#define DIO2 4 // ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||||
|
||||
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
|
||||
#define OLED_RST NOT_A_PIN // Not reset pin
|
||||
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
|
||||
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
|
||||
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user