Merge pull request #916 from cyberman54/development

Development
This commit is contained in:
Verkehrsrot 2022-11-14 15:00:15 +01:00 committed by GitHub
commit be59f97307
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
15 changed files with 55 additions and 59 deletions

View File

@ -518,7 +518,7 @@ Send for example `83` `86` as Downlink on Port 2 to get battery status and time/
0x19 set sleep cycle
bytes 1..2 = device sleep cycle in seconds/10 (MSB), 1 ... 255
e.g. {0x04, 0xB0} -> device sleeps 20 minutes after each send cycle [default = 0]
e.g. {0x04, 0xB0} -> device sleeps 200 minutes after each send cycle [default = 0]
0x20 load device configuration

View File

@ -8,19 +8,16 @@
#include "power.h"
#include "timekeeper.h"
#if (HAS_DISPLAY) == 1
#include <OneBitDisplay.h>
extern ONE_BIT_DISPLAY *dp;
#elif (HAS_DISPLAY) == 2
#include <bb_spi_lcd.h>
extern BB_SPI_LCD *dp;
#endif
#define DISPLAY_PAGES (7) // number of paxcounter display pages
#define PLOTBUFFERSIZE (MY_DISPLAY_WIDTH * MY_DISPLAY_HEIGHT / 8)
#define QR_VERSION 3 // 29 x 29px
// settings for OLED display library
// Settings for OLED display library
#if (HAS_DISPLAY) == 1
#include <OneBitDisplay.h>
extern ONE_BIT_DISPLAY *dp;
#define MY_FONT_SMALL FONT_6x8
#define MY_FONT_NORMAL FONT_8x8
#define MY_FONT_LARGE FONT_16x32
@ -30,17 +27,17 @@ extern BB_SPI_LCD *dp;
#ifndef MY_DISPLAY_RST
#define MY_DISPLAY_RST NOT_A_PIN
#endif
#ifdef MY_DISPLAY_ADDR
#define OLED_ADDR MY_DISPLAY_ADDR
#else
#define OLED_ADDR -1
#endif
#ifndef OLED_FREQUENCY
#define OLED_FREQUENCY 400000L
#endif
#ifndef OLED_TYPE
#define OLED_TYPE OLED_128x64
#endif
#ifndef MY_DISPLAY_FGCOLOR
#define MY_DISPLAY_FGCOLOR 1 // OLED_WHITE
#endif
@ -48,19 +45,15 @@ extern BB_SPI_LCD *dp;
#define MY_DISPLAY_BGCOLOR 0 // OLED_BLACK
#endif
// settings for TFT display library
#elif (HAS_DISPLAY) == 2
// Settings for TFT display library
#elif (HAS_DISPLAY) > 1
#define MY_FONT_SMALL 2
#define MY_FONT_NORMAL 2
#define MY_FONT_LARGE 2
#define MY_FONT_STRETCHED 2
#define MY_DISPLAY_FIRSTLINE 30
#include <bb_spi_lcd.h>
extern BB_SPI_LCD *dp;
#ifndef TFT_FREQUENCY
#define TFT_FREQUENCY 400000L
#endif
#ifndef MY_DISPLAY_FGCOLOR
#define MY_DISPLAY_FGCOLOR TFT_YELLOW
#endif
@ -70,31 +63,39 @@ extern BB_SPI_LCD *dp;
#endif
// setup display hardware type, default is OLED 128x64
#ifndef OLED_TYPE
#define OLED_TYPE OLED_128x64
// Fonts for large TFT display library
#if (HAS_DISPLAY) == 2
#define MY_FONT_SMALL FONT_12x16
#define MY_FONT_NORMAL FONT_12x16
#define MY_FONT_LARGE FONT_12x16
#define MY_FONT_STRETCHED FONT_12x16
#define MY_DISPLAY_FIRSTLINE 30
#endif
// Settings for small TFT display library
#if (HAS_DISPLAY) == 3
#define MY_FONT_SMALL FONT_6x8
#define MY_FONT_NORMAL FONT_8x8
#define MY_FONT_LARGE FONT_16x16
#define MY_FONT_STRETCHED FONT_12x16
#define MY_DISPLAY_FIRSTLINE 30
#endif
// Default settings for all display types
#ifndef MY_DISPLAY_FLIP
#define MY_DISPLAY_FLIP 0
#endif
#ifndef MY_DISPLAY_WIDTH
#define MY_DISPLAY_WIDTH 128 // Width in pixels of OLED-display, must be 32X
#define MY_DISPLAY_WIDTH 128
#endif
#ifndef MY_DISPLAY_HEIGHT
#define MY_DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 64X
#define MY_DISPLAY_HEIGHT 64
#endif
#ifndef MY_DISPLAY_FIRSTLINE
#define MY_DISPLAY_FIRSTLINE 0
#endif
// settings for qr code generator
#define QR_VERSION 3 // 29 x 29px
const uint8_t QR_SCALEFACTOR = (MY_DISPLAY_HEIGHT - 4) / 29; // 4px borderlines
extern uint8_t DisplayIsOn;
extern hw_timer_t *displayIRQ;
extern uint8_t volatile channel; // wifi channel rotation counter

View File

@ -25,7 +25,7 @@ extern char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer
esp_err_t lmic_init(void);
void lora_setupForNetwork(bool preJoin);
void SaveLMICToRTC(int deepsleep_sec);
void SaveLMICToRTC(uint32_t deepsleep_sec);
void LoadLMICFromRTC();
void lmictask(void *pvParameters);
void gen_lora_deveui(uint8_t *pdeveui);

View File

@ -14,8 +14,7 @@
void reset_rtc_vars(void);
void do_reset(bool warmstart);
void do_after_reset(void);
void enter_deepsleep(const uint64_t wakeup_sec = 60,
const gpio_num_t wakeup_gpio = GPIO_NUM_MAX);
void enter_deepsleep(const uint32_t wakeup_sec, const gpio_num_t wakeup_gpio);
unsigned long long uptime(void);
enum runmode_t {

View File

@ -46,7 +46,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 3.4.1
release_version = 3.4.3
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3

View File

@ -10,7 +10,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 3.4.1
release_version = 3.4.3
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3

View File

@ -37,7 +37,7 @@ static void defaultConfig(configData_t *myconfig) {
myconfig->screenon = 1; // 0=disabled, 1=enabled
myconfig->countermode =
COUNTERMODE; // 0=cyclic, 1=cumulative, 2=cyclic confirmed
myconfig->rssilimit = 0; // threshold for rssilimiter, negative value!
myconfig->rssilimit = RSSILIMIT; // threshold for rssilimiter, negative value!
myconfig->sendcycle = SENDCYCLE; // payload send cycle [seconds/2]
myconfig->sleepcycle = SLEEPCYCLE; // sleep cycle [seconds/10]
myconfig->wifichancycle =

View File

@ -49,7 +49,7 @@ static QRCode qrcode;
#ifdef HAS_DISPLAY
#if (HAS_DISPLAY) == 1
ONE_BIT_DISPLAY *dp = NULL;
#elif (HAS_DISPLAY) == 2
#elif (HAS_DISPLAY) > 1
BB_SPI_LCD *dp = NULL;
#else
#error Unknown display type specified in hal file
@ -66,15 +66,15 @@ void dp_setup(int contrast) {
dp->allocBuffer(); // render all outputs to lib internal backbuffer
dp->setTextWrap(false);
dp->setRotation(
MY_DISPLAY_FLIP ? 2 : 0); // 0 = no rotation, 1 = 90°, 2 = 180°, 3 = 28
MY_DISPLAY_FLIP ? 2 : 0); // 0 = no rotation, 1 = 90°, 2 = 180°, 3 = 27
#elif (HAS_DISPLAY) == 2 // TFT LCD
#elif (HAS_DISPLAY) > 1 // TFT LCD
dp = new BB_SPI_LCD;
dp->begin(TFT_TYPE);
dp->allocBuffer(); // render all outputs to lib internal backbuffer
dp->setRotation(
MY_DISPLAY_FLIP ? 1 : 3); // 0 = no rotation, 1 = 90°, 2 = 180°, 3 = 28
MY_DISPLAY_FLIP ? 1 : 3); // 0 = no rotation, 1 = 90°, 2 = 180°, 3 = 27
dp->setTextColor(MY_DISPLAY_FGCOLOR, MY_DISPLAY_BGCOLOR);
#endif
@ -421,7 +421,7 @@ void dp_clear(void) {
void dp_contrast(uint8_t contrast) {
#if (HAS_DISPLAY) == 1
dp->setContrast(contrast);
#elif (HAS_DISPLAY) == 2
#elif (HAS_DISPLAY) > 1
// to do: gamma correction for TFT
#endif
}
@ -429,7 +429,7 @@ void dp_contrast(uint8_t contrast) {
void dp_power(uint8_t screenon) {
#if (HAS_DISPLAY) == 1
dp->setPower(screenon);
#elif (HAS_DISPLAY) == 2
#elif (HAS_DISPLAY) > 1
// to come
#endif
}
@ -438,7 +438,7 @@ void dp_shutdown(void) {
#if (HAS_DISPLAY) == 1
dp->setPower(false);
delay(DISPLAYREFRESH_MS / 1000 * 1.1);
#elif (HAS_DISPLAY) == 2
#elif (HAS_DISPLAY) > 1
// to come
#endif
}

View File

@ -18,17 +18,10 @@
#define SDCARD_SLOTWIDTH 4 // dongle has 4 line interface
#define SDCARD_SLOTCONFIG { .clk = GPIO_NUM_12, .cmd = GPIO_NUM_16, .d0 = GPIO_NUM_14, .d1 = GPIO_NUM_17, .d2 = GPIO_NUM_21, .d3 = GPIO_NUM_18, .cd = SDMMC_SLOT_NO_CD, .wp = SDMMC_SLOT_NO_WP, .width = 4, .flags = 0, }
#define HAS_DISPLAY 2 // TFT-LCD
#define TFT_TYPE DISPLAY_T_DISPLAY_S3 // may currently not work, we are awaiting a PR for display lib
#define HAS_DISPLAY 3 // TFT-LCD
#define TFT_TYPE DISPLAY_T_DONGLE_S3
#define MY_DISPLAY_FLIP 1 // use if display is rotated
#define MY_DISPLAY_WIDTH 80
#define MY_DISPLAY_HEIGHT 160
#define TFT_CS_PIN 4
#define TFT_SDA_PIN 3
#define TFT_SCL_PIN 5
#define TFT_DC_PIN 2
#define TFT_RES_PIN 1
#define TFT_LEDA_PIN 38
#endif

View File

@ -76,9 +76,9 @@ void irqHandler(void *pvParameters) {
// goto sleep if we have a sleep cycle
if (cfg.sleepcycle)
#ifdef HAS_BUTTON
enter_deepsleep(cfg.sleepcycle * 10, (gpio_num_t)HAS_BUTTON);
enter_deepsleep(cfg.sleepcycle * 10UL, (gpio_num_t)HAS_BUTTON);
#else
enter_deepsleep(cfg.sleepcycle * 10);
enter_deepsleep(cfg.sleepcycle * 10UL, GPIO_NUM_MAX);
#endif
}
} // for

View File

@ -501,7 +501,7 @@ bool ttn_rtc_restore() {
// following code includes snippets taken from
// https://github.com/JackGruber/ESP32-LMIC-DeepSleep-example/blob/master/src/main.cpp
void SaveLMICToRTC(int deepsleep_sec) {
void SaveLMICToRTC(uint32_t deepsleep_sec) {
// ESP32 can't track millis during DeepSleep and no option to advance
// millis after DeepSleep. Therefore reset DutyCyles before saving LMIC struct

View File

@ -28,6 +28,7 @@
// MAC sniffing parameters
#define BLECOUNTER 1 // set to 0 if you do not want to install the BLE sniffer
#define WIFICOUNTER 1 // set to 0 if you do not want to install the WIFI sniffer
#define RSSILIMIT 0 // 0...-128, set to 0 if you do not want to filter signals
// BLE scan parameters
#define BLESCANTIME 0 // [seconds] scan duration, 0 means infinite [default], see note below

View File

@ -57,7 +57,7 @@ void AXP192_powerevent_IRQ(void) {
#ifdef HAS_BUTTON
// short press -> esp32 deep sleep mode, must be exited by user button
if (pmu.isPekeyShortPressIrq())
enter_deepsleep(0, HAS_BUTTON);
enter_deepsleep(0UL, HAS_BUTTON);
#endif
pmu.clearIrqStatus();

View File

@ -84,7 +84,7 @@ void do_after_reset(void) {
}
}
void enter_deepsleep(const uint64_t wakeup_sec, gpio_num_t wakeup_gpio) {
void enter_deepsleep(const uint32_t wakeup_sec, gpio_num_t wakeup_gpio) {
ESP_LOGI(TAG, "Preparing to sleep...");
RTC_runmode = RUNMODE_SLEEP;

View File

@ -216,6 +216,8 @@ void sdcard_flush(void) {
}
void sdcard_close(void) {
if (!useSDCard)
return;
ESP_LOGI(TAG, "closing SD-card");
sdcard_flush();
#ifdef SD_LOGGING