Verkehrsrot
GitHub
commit
bc198b722b
@ -33,12 +33,15 @@ This can all be done with a single small and cheap ESP32 board for less than $20
|
||||
*LoRa & SPI*:
|
||||
|
||||
- Heltec: LoRa-32 v1 and v2
|
||||
- TTGO: T1*, T2*, T3*, T-Beam, T-Fox (* supports microSD-card)
|
||||
- TTGO: T1*, T2*, T3*, T-Beam, T-Fox
|
||||
- Pycom: LoPy, LoPy4, FiPy
|
||||
- Radioshuttle.de: [ECO Power Board](https://www.radioshuttle.de/esp32-eco-power/esp32-eco-power-board/)
|
||||
- WeMos: LoLin32 + [LoraNode32 shield](https://github.com/hallard/LoLin32-Lora),
|
||||
- WeMos: LoLin32 + [LoraNode32 shield](https://github.com/hallard/LoLin32-Lora),
|
||||
LoLin32lite + [LoraNode32-Lite shield](https://github.com/hallard/LoLin32-Lite-Lora)
|
||||
- Adafruit ESP32 Feather + LoRa Wing + OLED Wing, #IoT Octopus32 (Octopus + ESP32 Feather)
|
||||
- M5Stack: [Basic Core*](https://m5stack.com/collections/m5-core/products/basic-core-iot-development-kit) + [Lora Module RA-01H](https://m5stack.com/collections/m5-module/products/lora-module-868mhz)
|
||||
|
||||
*) supports microSD-card
|
||||
|
||||
*SPI only*:
|
||||
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
#include <Wire.h>
|
||||
|
||||
#ifdef HAS_BME680
|
||||
#include "../lib/Bosch-BSEC/src/bsec.h"
|
||||
#include <bsec.h>
|
||||
#elif defined HAS_BME280
|
||||
#include <Adafruit_Sensor.h>
|
||||
#include <Adafruit_BME280.h>
|
||||
|
||||
@ -9,7 +9,7 @@ extern uint8_t DisplayIsOn, displaybuf[];
|
||||
void refreshTheDisplay(bool nextPage = false);
|
||||
void init_display(bool verbose = false);
|
||||
void shutdown_display(void);
|
||||
void draw_page(time_t t, uint8_t page);
|
||||
void draw_page(time_t t, bool nextpage);
|
||||
void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv,
|
||||
const char *format, ...);
|
||||
void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message);
|
||||
|
||||
@ -15,7 +15,7 @@
|
||||
#include <array>
|
||||
#include <algorithm>
|
||||
#include "mallocator.h"
|
||||
#include "../lib/Bosch-BSEC/src/inc/bsec_datatypes.h"
|
||||
#include <bsec.h>
|
||||
|
||||
// sniffing types
|
||||
#define MAC_SNIFF_WIFI 0
|
||||
|
||||
@ -16,10 +16,6 @@
|
||||
#include "sdcard.h"
|
||||
#endif
|
||||
|
||||
#if (HAS_SDS011)
|
||||
#include "sds011read.h"
|
||||
#endif
|
||||
|
||||
extern Ticker sendcycler;
|
||||
|
||||
void SendPayload(uint8_t port, sendprio_t prio);
|
||||
|
||||
@ -28,6 +28,8 @@ licenses. Refer to LICENSE.txt file in repository for more details.
|
||||
|
||||
esp_err_t spi_init();
|
||||
|
||||
extern TaskHandle_t spiTask;
|
||||
|
||||
void spi_enqueuedata(MessageBuffer_t *message);
|
||||
void spi_queuereset();
|
||||
|
||||
|
||||
@ -1,39 +0,0 @@
|
||||
Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
|
||||
Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
|
||||
Neither the name of the copyright holder nor the names of the
|
||||
contributors may be used to endorse or promote products derived from
|
||||
this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
|
||||
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
|
||||
OR CONTRIBUTORS BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
||||
OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
|
||||
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
||||
|
||||
The information provided is believed to be accurate and reliable.
|
||||
The copyright holder assumes no responsibility
|
||||
for the consequences of use
|
||||
of such information nor for any infringement of patents or
|
||||
other rights of third parties which may result from its use.
|
||||
No license is granted by implication or otherwise under any patent or
|
||||
patent rights of the copyright holder.
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,133,135,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,133,135,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,166,224,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,166,224,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,23,142,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,23,142,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,52,233,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,52,233,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,59,62,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,59,62,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,24,89,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,24,89,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,169,55,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,169,55,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,138,80,0,0
|
||||
|
@ -1,5 +0,0 @@
|
||||
#include "bsec_serialized_configurations_iaq.h"
|
||||
|
||||
const uint8_t bsec_config_iaq[454] =
|
||||
{4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,138,80,0,0};
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#include <stdint.h>
|
||||
|
||||
extern const uint8_t bsec_config_iaq[454];
|
||||
|
||||
Binary file not shown.
File diff suppressed because it is too large
Load Diff
@ -1,282 +0,0 @@
|
||||
# BME680 sensor API
|
||||
|
||||
## Introduction
|
||||
|
||||
This package contains the Bosch Sensortec's BME680 gas sensor API
|
||||
|
||||
The sensor driver package includes bme680.h, bme680.c and bme680_defs.h files
|
||||
|
||||
## Version
|
||||
|
||||
File | Version | Date
|
||||
--------------|---------|-------------
|
||||
bme680.c | 3.5.9 | 19 Jun 2018
|
||||
bme680.h | 3.5.9 | 19 Jun 2018
|
||||
bme680_defs.h | 3.5.9 | 19 Jun 2018
|
||||
|
||||
## Integration details
|
||||
|
||||
* Integrate bme680.h, bme680_defs.h and bme680.c file in to your project.
|
||||
* Include the bme680.h file in your code like below.
|
||||
|
||||
``` c
|
||||
#include "bme680.h"
|
||||
```
|
||||
|
||||
## File information
|
||||
|
||||
* bme680_defs.h : This header file has the constants, macros and datatype declarations.
|
||||
* bme680.h : This header file contains the declarations of the sensor driver APIs.
|
||||
* bme680.c : This source file contains the definitions of the sensor driver APIs.
|
||||
|
||||
## Supported sensor interfaces
|
||||
|
||||
* SPI 4-wire
|
||||
* I2C
|
||||
|
||||
## Usage guide
|
||||
|
||||
### Initializing the sensor
|
||||
|
||||
To initialize the sensor, you will first need to create a device structure. You
|
||||
can do this by creating an instance of the structure bme680_dev. Then go on to
|
||||
fill in the various parameters as shown below
|
||||
|
||||
#### Example for SPI 4-Wire
|
||||
|
||||
``` c
|
||||
struct bme680_dev gas_sensor;
|
||||
|
||||
/* You may assign a chip select identifier to be handled later */
|
||||
gas_sensor.dev_id = 0;
|
||||
gas_sensor.intf = BME680_SPI_INTF;
|
||||
gas_sensor.read = user_spi_read;
|
||||
gas_sensor.write = user_spi_write;
|
||||
gas_sensor.delay_ms = user_delay_ms;
|
||||
/* amb_temp can be set to 25 prior to configuring the gas sensor
|
||||
* or by performing a few temperature readings without operating the gas sensor.
|
||||
*/
|
||||
gas_sensor.amb_temp = 25;
|
||||
|
||||
int8_t rslt = BME680_OK;
|
||||
rslt = bme680_init(&gas_sensor);
|
||||
```
|
||||
|
||||
#### Example for I2C
|
||||
|
||||
``` c
|
||||
struct bme680_dev gas_sensor;
|
||||
|
||||
gas_sensor.dev_id = BME680_I2C_ADDR_PRIMARY;
|
||||
gas_sensor.intf = BME680_I2C_INTF;
|
||||
gas_sensor.read = i2c_read;
|
||||
gas_sensor.write = i2c_write;
|
||||
gas_sensor.delay_ms = user_delay_ms;
|
||||
/* amb_temp can be set to 25 prior to configuring the gas sensor
|
||||
* or by performing a few temperature readings without operating the gas sensor.
|
||||
*/
|
||||
gas_sensor.amb_temp = 25;
|
||||
|
||||
|
||||
int8_t rslt = BME680_OK;
|
||||
rslt = bme680_init(&gas_sensor);
|
||||
```
|
||||
|
||||
Regarding compensation functions for temperature, pressure, humidity and gas we have two implementations.
|
||||
|
||||
- Integer version
|
||||
- floating point version
|
||||
|
||||
By default, Integer version is used in the API
|
||||
|
||||
If the user needs the floating point version, the user has to un-comment BME680_FLOAT_POINT_COMPENSATION macro
|
||||
in bme680_defs.h file or to add it in the compiler flags.
|
||||
|
||||
### Configuring the sensor
|
||||
|
||||
#### Example for configuring the sensor in forced mode
|
||||
|
||||
``` c
|
||||
uint8_t set_required_settings;
|
||||
|
||||
/* Set the temperature, pressure and humidity settings */
|
||||
gas_sensor.tph_sett.os_hum = BME680_OS_2X;
|
||||
gas_sensor.tph_sett.os_pres = BME680_OS_4X;
|
||||
gas_sensor.tph_sett.os_temp = BME680_OS_8X;
|
||||
gas_sensor.tph_sett.filter = BME680_FILTER_SIZE_3;
|
||||
|
||||
/* Set the remaining gas sensor settings and link the heating profile */
|
||||
gas_sensor.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS;
|
||||
/* Create a ramp heat waveform in 3 steps */
|
||||
gas_sensor.gas_sett.heatr_temp = 320; /* degree Celsius */
|
||||
gas_sensor.gas_sett.heatr_dur = 150; /* milliseconds */
|
||||
|
||||
/* Select the power mode */
|
||||
/* Must be set before writing the sensor configuration */
|
||||
gas_sensor.power_mode = BME680_FORCED_MODE;
|
||||
|
||||
/* Set the required sensor settings needed */
|
||||
set_required_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL | BME680_FILTER_SEL
|
||||
| BME680_GAS_SENSOR_SEL;
|
||||
|
||||
/* Set the desired sensor configuration */
|
||||
rslt = bme680_set_sensor_settings(set_required_settings,&gas_sensor);
|
||||
|
||||
/* Set the power mode */
|
||||
rslt = bme680_set_sensor_mode(&gas_sensor);
|
||||
|
||||
|
||||
```
|
||||
|
||||
### Reading sensor data
|
||||
|
||||
#### Example for reading all sensor data
|
||||
|
||||
``` c
|
||||
/* Get the total measurement duration so as to sleep or wait till the
|
||||
* measurement is complete */
|
||||
uint16_t meas_period;
|
||||
bme680_get_profile_dur(&meas_period, &gas_sensor);
|
||||
|
||||
struct bme680_field_data data;
|
||||
|
||||
while(1)
|
||||
{
|
||||
user_delay_ms(meas_period); /* Delay till the measurement is ready */
|
||||
|
||||
rslt = bme680_get_sensor_data(&data, &gas_sensor);
|
||||
|
||||
printf("T: %.2f degC, P: %.2f hPa, H %.2f %%rH ", data.temperature / 100.0f,
|
||||
data.pressure / 100.0f, data.humidity / 1000.0f );
|
||||
/* Avoid using measurements from an unstable heating setup */
|
||||
if(data.status & BME680_GASM_VALID_MSK)
|
||||
printf(", G: %d ohms", data.gas_resistance);
|
||||
|
||||
printf("\r\n");
|
||||
|
||||
/* Trigger the next measurement if you would like to read data out continuously */
|
||||
if (gas_sensor.power_mode == BME680_FORCED_MODE) {
|
||||
rslt = bme680_set_sensor_mode(&gas_sensor);
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
### Templates for function pointers
|
||||
|
||||
``` c
|
||||
|
||||
void user_delay_ms(uint32_t period)
|
||||
{
|
||||
/*
|
||||
* Return control or wait,
|
||||
* for a period amount of milliseconds
|
||||
*/
|
||||
}
|
||||
|
||||
int8_t user_spi_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
|
||||
{
|
||||
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
|
||||
|
||||
/*
|
||||
* The parameter dev_id can be used as a variable to select which Chip Select pin has
|
||||
* to be set low to activate the relevant device on the SPI bus
|
||||
*/
|
||||
|
||||
/*
|
||||
* Data on the bus should be like
|
||||
* |----------------+---------------------+-------------|
|
||||
* | MOSI | MISO | Chip Select |
|
||||
* |----------------+---------------------|-------------|
|
||||
* | (don't care) | (don't care) | HIGH |
|
||||
* | (reg_addr) | (don't care) | LOW |
|
||||
* | (don't care) | (reg_data[0]) | LOW |
|
||||
* | (....) | (....) | LOW |
|
||||
* | (don't care) | (reg_data[len - 1]) | LOW |
|
||||
* | (don't care) | (don't care) | HIGH |
|
||||
* |----------------+---------------------|-------------|
|
||||
*/
|
||||
|
||||
return rslt;
|
||||
}
|
||||
|
||||
int8_t user_spi_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
|
||||
{
|
||||
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
|
||||
|
||||
/*
|
||||
* The parameter dev_id can be used as a variable to select which Chip Select pin has
|
||||
* to be set low to activate the relevant device on the SPI bus
|
||||
*/
|
||||
|
||||
/*
|
||||
* Data on the bus should be like
|
||||
* |---------------------+--------------+-------------|
|
||||
* | MOSI | MISO | Chip Select |
|
||||
* |---------------------+--------------|-------------|
|
||||
* | (don't care) | (don't care) | HIGH |
|
||||
* | (reg_addr) | (don't care) | LOW |
|
||||
* | (reg_data[0]) | (don't care) | LOW |
|
||||
* | (....) | (....) | LOW |
|
||||
* | (reg_data[len - 1]) | (don't care) | LOW |
|
||||
* | (don't care) | (don't care) | HIGH |
|
||||
* |---------------------+--------------|-------------|
|
||||
*/
|
||||
|
||||
return rslt;
|
||||
}
|
||||
|
||||
int8_t i2c_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
|
||||
{
|
||||
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
|
||||
|
||||
/*
|
||||
* The parameter dev_id can be used as a variable to store the I2C address of the device
|
||||
*/
|
||||
|
||||
/*
|
||||
* Data on the bus should be like
|
||||
* |------------+---------------------|
|
||||
* | I2C action | Data |
|
||||
* |------------+---------------------|
|
||||
* | Start | - |
|
||||
* | Write | (reg_addr) |
|
||||
* | Stop | - |
|
||||
* | Start | - |
|
||||
* | Read | (reg_data[0]) |
|
||||
* | Read | (....) |
|
||||
* | Read | (reg_data[len - 1]) |
|
||||
* | Stop | - |
|
||||
* |------------+---------------------|
|
||||
*/
|
||||
|
||||
return rslt;
|
||||
}
|
||||
|
||||
int8_t i2c_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
|
||||
{
|
||||
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
|
||||
|
||||
/*
|
||||
* The parameter dev_id can be used as a variable to store the I2C address of the device
|
||||
*/
|
||||
|
||||
/*
|
||||
* Data on the bus should be like
|
||||
* |------------+---------------------|
|
||||
* | I2C action | Data |
|
||||
* |------------+---------------------|
|
||||
* | Start | - |
|
||||
* | Write | (reg_addr) |
|
||||
* | Write | (reg_data[0]) |
|
||||
* | Write | (....) |
|
||||
* | Write | (reg_data[len - 1]) |
|
||||
* | Stop | - |
|
||||
* |------------+---------------------|
|
||||
*/
|
||||
|
||||
return rslt;
|
||||
}
|
||||
|
||||
```
|
||||
|
||||
## Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,225 +0,0 @@
|
||||
/**
|
||||
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* Neither the name of the copyright holder nor the names of the
|
||||
* contributors may be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
|
||||
* OR CONTRIBUTORS BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
||||
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
|
||||
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
||||
*
|
||||
* The information provided is believed to be accurate and reliable.
|
||||
* The copyright holder assumes no responsibility
|
||||
* for the consequences of use
|
||||
* of such information nor for any infringement of patents or
|
||||
* other rights of third parties which may result from its use.
|
||||
* No license is granted by implication or otherwise under any patent or
|
||||
* patent rights of the copyright holder.
|
||||
*
|
||||
* @file bme680.h
|
||||
* @date 19 Jun 2018
|
||||
* @version 3.5.9
|
||||
* @brief
|
||||
*
|
||||
*/
|
||||
/*! @file bme680.h
|
||||
@brief Sensor driver for BME680 sensor */
|
||||
/*!
|
||||
* @defgroup BME680 SENSOR API
|
||||
* @{*/
|
||||
#ifndef BME680_H_
|
||||
#define BME680_H_
|
||||
|
||||
/*! CPP guard */
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif
|
||||
|
||||
/* Header includes */
|
||||
#include "bme680_defs.h"
|
||||
|
||||
/* function prototype declarations */
|
||||
/*!
|
||||
* @brief This API is the entry point.
|
||||
* It reads the chip-id and calibration data from the sensor.
|
||||
*
|
||||
* @param[in,out] dev : Structure instance of bme680_dev
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
|
||||
*/
|
||||
int8_t bme680_init(struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API writes the given data to the register address
|
||||
* of the sensor.
|
||||
*
|
||||
* @param[in] reg_addr : Register address from where the data to be written.
|
||||
* @param[in] reg_data : Pointer to data buffer which is to be written
|
||||
* in the sensor.
|
||||
* @param[in] len : No of bytes of data to write..
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
|
||||
*/
|
||||
int8_t bme680_set_regs(const uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API reads the data from the given register address of the sensor.
|
||||
*
|
||||
* @param[in] reg_addr : Register address from where the data to be read
|
||||
* @param[out] reg_data : Pointer to data buffer to store the read data.
|
||||
* @param[in] len : No of bytes of data to be read.
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
|
||||
*/
|
||||
int8_t bme680_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API performs the soft reset of the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
|
||||
*/
|
||||
int8_t bme680_soft_reset(struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API is used to set the power mode of the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev
|
||||
* @note : Pass the value to bme680_dev.power_mode structure variable.
|
||||
*
|
||||
* value | mode
|
||||
* -------------|------------------
|
||||
* 0x00 | BME680_SLEEP_MODE
|
||||
* 0x01 | BME680_FORCED_MODE
|
||||
*
|
||||
* * @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
|
||||
*/
|
||||
int8_t bme680_set_sensor_mode(struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API is used to get the power mode of the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev
|
||||
* @note : bme680_dev.power_mode structure variable hold the power mode.
|
||||
*
|
||||
* value | mode
|
||||
* ---------|------------------
|
||||
* 0x00 | BME680_SLEEP_MODE
|
||||
* 0x01 | BME680_FORCED_MODE
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
|
||||
*/
|
||||
int8_t bme680_get_sensor_mode(struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API is used to set the profile duration of the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
* @param[in] duration : Duration of the measurement in ms.
|
||||
*
|
||||
* @return Nothing
|
||||
*/
|
||||
void bme680_set_profile_dur(uint16_t duration, struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API is used to get the profile duration of the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
* @param[in] duration : Duration of the measurement in ms.
|
||||
*
|
||||
* @return Nothing
|
||||
*/
|
||||
void bme680_get_profile_dur(uint16_t *duration, const struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API reads the pressure, temperature and humidity and gas data
|
||||
* from the sensor, compensates the data and store it in the bme680_data
|
||||
* structure instance passed by the user.
|
||||
*
|
||||
* @param[out] data: Structure instance to hold the data.
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
|
||||
*/
|
||||
int8_t bme680_get_sensor_data(struct bme680_field_data *data, struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API is used to set the oversampling, filter and T,P,H, gas selection
|
||||
* settings in the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
* @param[in] desired_settings : Variable used to select the settings which
|
||||
* are to be set in the sensor.
|
||||
*
|
||||
* Macros | Functionality
|
||||
*---------------------------------|----------------------------------------------
|
||||
* BME680_OST_SEL | To set temperature oversampling.
|
||||
* BME680_OSP_SEL | To set pressure oversampling.
|
||||
* BME680_OSH_SEL | To set humidity oversampling.
|
||||
* BME680_GAS_MEAS_SEL | To set gas measurement setting.
|
||||
* BME680_FILTER_SEL | To set filter setting.
|
||||
* BME680_HCNTRL_SEL | To set humidity control setting.
|
||||
* BME680_RUN_GAS_SEL | To set run gas setting.
|
||||
* BME680_NBCONV_SEL | To set NB conversion setting.
|
||||
* BME680_GAS_SENSOR_SEL | To set all gas sensor related settings
|
||||
*
|
||||
* @note : Below are the macros to be used by the user for selecting the
|
||||
* desired settings. User can do OR operation of these macros for configuring
|
||||
* multiple settings.
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
|
||||
*/
|
||||
int8_t bme680_set_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
|
||||
|
||||
/*!
|
||||
* @brief This API is used to get the oversampling, filter and T,P,H, gas selection
|
||||
* settings in the sensor.
|
||||
*
|
||||
* @param[in] dev : Structure instance of bme680_dev.
|
||||
* @param[in] desired_settings : Variable used to select the settings which
|
||||
* are to be get from the sensor.
|
||||
*
|
||||
* @return Result of API execution status
|
||||
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
|
||||
*/
|
||||
int8_t bme680_get_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* End of CPP guard */
|
||||
#endif /* BME680_H_ */
|
||||
/** @}*/
|
||||
@ -1,545 +0,0 @@
|
||||
/**
|
||||
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* Neither the name of the copyright holder nor the names of the
|
||||
* contributors may be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
|
||||
* OR CONTRIBUTORS BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
||||
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
|
||||
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
||||
*
|
||||
* The information provided is believed to be accurate and reliable.
|
||||
* The copyright holder assumes no responsibility
|
||||
* for the consequences of use
|
||||
* of such information nor for any infringement of patents or
|
||||
* other rights of third parties which may result from its use.
|
||||
* No license is granted by implication or otherwise under any patent or
|
||||
* patent rights of the copyright holder.
|
||||
*
|
||||
* @file bme680_defs.h
|
||||
* @date 19 Jun 2018
|
||||
* @version 3.5.9
|
||||
* @brief
|
||||
*
|
||||
*/
|
||||
|
||||
/*! @file bme680_defs.h
|
||||
@brief Sensor driver for BME680 sensor */
|
||||
/*!
|
||||
* @defgroup BME680 SENSOR API
|
||||
* @brief
|
||||
* @{*/
|
||||
#ifndef BME680_DEFS_H_
|
||||
#define BME680_DEFS_H_
|
||||
|
||||
/********************************************************/
|
||||
/* header includes */
|
||||
#ifdef __KERNEL__
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#else
|
||||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
/*! @name Common macros */
|
||||
/******************************************************************************/
|
||||
|
||||
#if !defined(UINT8_C) && !defined(INT8_C)
|
||||
#define INT8_C(x) S8_C(x)
|
||||
#define UINT8_C(x) U8_C(x)
|
||||
#endif
|
||||
|
||||
#if !defined(UINT16_C) && !defined(INT16_C)
|
||||
#define INT16_C(x) S16_C(x)
|
||||
#define UINT16_C(x) U16_C(x)
|
||||
#endif
|
||||
|
||||
#if !defined(INT32_C) && !defined(UINT32_C)
|
||||
#define INT32_C(x) S32_C(x)
|
||||
#define UINT32_C(x) U32_C(x)
|
||||
#endif
|
||||
|
||||
#if !defined(INT64_C) && !defined(UINT64_C)
|
||||
#define INT64_C(x) S64_C(x)
|
||||
#define UINT64_C(x) U64_C(x)
|
||||
#endif
|
||||
|
||||
/**@}*/
|
||||
|
||||
/**\name C standard macros */
|
||||
#ifndef NULL
|
||||
#ifdef __cplusplus
|
||||
#define NULL 0
|
||||
#else
|
||||
#define NULL ((void *) 0)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/** BME680 configuration macros */
|
||||
/** Enable or un-comment the macro to provide floating point data output */
|
||||
#ifndef BME680_FLOAT_POINT_COMPENSATION
|
||||
//#define BME680_FLOAT_POINT_COMPENSATION
|
||||
#endif
|
||||
|
||||
/** BME680 General config */
|
||||
#define BME680_POLL_PERIOD_MS UINT8_C(10)
|
||||
|
||||
/** BME680 I2C addresses */
|
||||
#define BME680_I2C_ADDR_PRIMARY UINT8_C(0x76)
|
||||
#define BME680_I2C_ADDR_SECONDARY UINT8_C(0x77)
|
||||
|
||||
/** BME680 unique chip identifier */
|
||||
#define BME680_CHIP_ID UINT8_C(0x61)
|
||||
|
||||
/** BME680 coefficients related defines */
|
||||
#define BME680_COEFF_SIZE UINT8_C(41)
|
||||
#define BME680_COEFF_ADDR1_LEN UINT8_C(25)
|
||||
#define BME680_COEFF_ADDR2_LEN UINT8_C(16)
|
||||
|
||||
/** BME680 field_x related defines */
|
||||
#define BME680_FIELD_LENGTH UINT8_C(15)
|
||||
#define BME680_FIELD_ADDR_OFFSET UINT8_C(17)
|
||||
|
||||
/** Soft reset command */
|
||||
#define BME680_SOFT_RESET_CMD UINT8_C(0xb6)
|
||||
|
||||
/** Error code definitions */
|
||||
#define BME680_OK INT8_C(0)
|
||||
/* Errors */
|
||||
#define BME680_E_NULL_PTR INT8_C(-1)
|
||||
#define BME680_E_COM_FAIL INT8_C(-2)
|
||||
#define BME680_E_DEV_NOT_FOUND INT8_C(-3)
|
||||
#define BME680_E_INVALID_LENGTH INT8_C(-4)
|
||||
|
||||
/* Warnings */
|
||||
#define BME680_W_DEFINE_PWR_MODE INT8_C(1)
|
||||
#define BME680_W_NO_NEW_DATA INT8_C(2)
|
||||
|
||||
/* Info's */
|
||||
#define BME680_I_MIN_CORRECTION UINT8_C(1)
|
||||
#define BME680_I_MAX_CORRECTION UINT8_C(2)
|
||||
|
||||
/** Register map */
|
||||
/** Other coefficient's address */
|
||||
#define BME680_ADDR_RES_HEAT_VAL_ADDR UINT8_C(0x00)
|
||||
#define BME680_ADDR_RES_HEAT_RANGE_ADDR UINT8_C(0x02)
|
||||
#define BME680_ADDR_RANGE_SW_ERR_ADDR UINT8_C(0x04)
|
||||
#define BME680_ADDR_SENS_CONF_START UINT8_C(0x5A)
|
||||
#define BME680_ADDR_GAS_CONF_START UINT8_C(0x64)
|
||||
|
||||
/** Field settings */
|
||||
#define BME680_FIELD0_ADDR UINT8_C(0x1d)
|
||||
|
||||
/** Heater settings */
|
||||
#define BME680_RES_HEAT0_ADDR UINT8_C(0x5a)
|
||||
#define BME680_GAS_WAIT0_ADDR UINT8_C(0x64)
|
||||
|
||||
/** Sensor configuration registers */
|
||||
#define BME680_CONF_HEAT_CTRL_ADDR UINT8_C(0x70)
|
||||
#define BME680_CONF_ODR_RUN_GAS_NBC_ADDR UINT8_C(0x71)
|
||||
#define BME680_CONF_OS_H_ADDR UINT8_C(0x72)
|
||||
#define BME680_MEM_PAGE_ADDR UINT8_C(0xf3)
|
||||
#define BME680_CONF_T_P_MODE_ADDR UINT8_C(0x74)
|
||||
#define BME680_CONF_ODR_FILT_ADDR UINT8_C(0x75)
|
||||
|
||||
/** Coefficient's address */
|
||||
#define BME680_COEFF_ADDR1 UINT8_C(0x89)
|
||||
#define BME680_COEFF_ADDR2 UINT8_C(0xe1)
|
||||
|
||||
/** Chip identifier */
|
||||
#define BME680_CHIP_ID_ADDR UINT8_C(0xd0)
|
||||
|
||||
/** Soft reset register */
|
||||
#define BME680_SOFT_RESET_ADDR UINT8_C(0xe0)
|
||||
|
||||
/** Heater control settings */
|
||||
#define BME680_ENABLE_HEATER UINT8_C(0x00)
|
||||
#define BME680_DISABLE_HEATER UINT8_C(0x08)
|
||||
|
||||
/** Gas measurement settings */
|
||||
#define BME680_DISABLE_GAS_MEAS UINT8_C(0x00)
|
||||
#define BME680_ENABLE_GAS_MEAS UINT8_C(0x01)
|
||||
|
||||
/** Over-sampling settings */
|
||||
#define BME680_OS_NONE UINT8_C(0)
|
||||
#define BME680_OS_1X UINT8_C(1)
|
||||
#define BME680_OS_2X UINT8_C(2)
|
||||
#define BME680_OS_4X UINT8_C(3)
|
||||
#define BME680_OS_8X UINT8_C(4)
|
||||
#define BME680_OS_16X UINT8_C(5)
|
||||
|
||||
/** IIR filter settings */
|
||||
#define BME680_FILTER_SIZE_0 UINT8_C(0)
|
||||
#define BME680_FILTER_SIZE_1 UINT8_C(1)
|
||||
#define BME680_FILTER_SIZE_3 UINT8_C(2)
|
||||
#define BME680_FILTER_SIZE_7 UINT8_C(3)
|
||||
#define BME680_FILTER_SIZE_15 UINT8_C(4)
|
||||
#define BME680_FILTER_SIZE_31 UINT8_C(5)
|
||||
#define BME680_FILTER_SIZE_63 UINT8_C(6)
|
||||
#define BME680_FILTER_SIZE_127 UINT8_C(7)
|
||||
|
||||
/** Power mode settings */
|
||||
#define BME680_SLEEP_MODE UINT8_C(0)
|
||||
#define BME680_FORCED_MODE UINT8_C(1)
|
||||
|
||||
/** Delay related macro declaration */
|
||||
#define BME680_RESET_PERIOD UINT32_C(10)
|
||||
|
||||
/** SPI memory page settings */
|
||||
#define BME680_MEM_PAGE0 UINT8_C(0x10)
|
||||
#define BME680_MEM_PAGE1 UINT8_C(0x00)
|
||||
|
||||
/** Ambient humidity shift value for compensation */
|
||||
#define BME680_HUM_REG_SHIFT_VAL UINT8_C(4)
|
||||
|
||||
/** Run gas enable and disable settings */
|
||||
#define BME680_RUN_GAS_DISABLE UINT8_C(0)
|
||||
#define BME680_RUN_GAS_ENABLE UINT8_C(1)
|
||||
|
||||
/** Buffer length macro declaration */
|
||||
#define BME680_TMP_BUFFER_LENGTH UINT8_C(40)
|
||||
#define BME680_REG_BUFFER_LENGTH UINT8_C(6)
|
||||
#define BME680_FIELD_DATA_LENGTH UINT8_C(3)
|
||||
#define BME680_GAS_REG_BUF_LENGTH UINT8_C(20)
|
||||
|
||||
/** Settings selector */
|
||||
#define BME680_OST_SEL UINT16_C(1)
|
||||
#define BME680_OSP_SEL UINT16_C(2)
|
||||
#define BME680_OSH_SEL UINT16_C(4)
|
||||
#define BME680_GAS_MEAS_SEL UINT16_C(8)
|
||||
#define BME680_FILTER_SEL UINT16_C(16)
|
||||
#define BME680_HCNTRL_SEL UINT16_C(32)
|
||||
#define BME680_RUN_GAS_SEL UINT16_C(64)
|
||||
#define BME680_NBCONV_SEL UINT16_C(128)
|
||||
#define BME680_GAS_SENSOR_SEL (BME680_GAS_MEAS_SEL | BME680_RUN_GAS_SEL | BME680_NBCONV_SEL)
|
||||
|
||||
/** Number of conversion settings*/
|
||||
#define BME680_NBCONV_MIN UINT8_C(0)
|
||||
#define BME680_NBCONV_MAX UINT8_C(10)
|
||||
|
||||
/** Mask definitions */
|
||||
#define BME680_GAS_MEAS_MSK UINT8_C(0x30)
|
||||
#define BME680_NBCONV_MSK UINT8_C(0X0F)
|
||||
#define BME680_FILTER_MSK UINT8_C(0X1C)
|
||||
#define BME680_OST_MSK UINT8_C(0XE0)
|
||||
#define BME680_OSP_MSK UINT8_C(0X1C)
|
||||
#define BME680_OSH_MSK UINT8_C(0X07)
|
||||
#define BME680_HCTRL_MSK UINT8_C(0x08)
|
||||
#define BME680_RUN_GAS_MSK UINT8_C(0x10)
|
||||
#define BME680_MODE_MSK UINT8_C(0x03)
|
||||
#define BME680_RHRANGE_MSK UINT8_C(0x30)
|
||||
#define BME680_RSERROR_MSK UINT8_C(0xf0)
|
||||
#define BME680_NEW_DATA_MSK UINT8_C(0x80)
|
||||
#define BME680_GAS_INDEX_MSK UINT8_C(0x0f)
|
||||
#define BME680_GAS_RANGE_MSK UINT8_C(0x0f)
|
||||
#define BME680_GASM_VALID_MSK UINT8_C(0x20)
|
||||
#define BME680_HEAT_STAB_MSK UINT8_C(0x10)
|
||||
#define BME680_MEM_PAGE_MSK UINT8_C(0x10)
|
||||
#define BME680_SPI_RD_MSK UINT8_C(0x80)
|
||||
#define BME680_SPI_WR_MSK UINT8_C(0x7f)
|
||||
#define BME680_BIT_H1_DATA_MSK UINT8_C(0x0F)
|
||||
|
||||
/** Bit position definitions for sensor settings */
|
||||
#define BME680_GAS_MEAS_POS UINT8_C(4)
|
||||
#define BME680_FILTER_POS UINT8_C(2)
|
||||
#define BME680_OST_POS UINT8_C(5)
|
||||
#define BME680_OSP_POS UINT8_C(2)
|
||||
#define BME680_RUN_GAS_POS UINT8_C(4)
|
||||
|
||||
/** Array Index to Field data mapping for Calibration Data*/
|
||||
#define BME680_T2_LSB_REG (1)
|
||||
#define BME680_T2_MSB_REG (2)
|
||||
#define BME680_T3_REG (3)
|
||||
#define BME680_P1_LSB_REG (5)
|
||||
#define BME680_P1_MSB_REG (6)
|
||||
#define BME680_P2_LSB_REG (7)
|
||||
#define BME680_P2_MSB_REG (8)
|
||||
#define BME680_P3_REG (9)
|
||||
#define BME680_P4_LSB_REG (11)
|
||||
#define BME680_P4_MSB_REG (12)
|
||||
#define BME680_P5_LSB_REG (13)
|
||||
#define BME680_P5_MSB_REG (14)
|
||||
#define BME680_P7_REG (15)
|
||||
#define BME680_P6_REG (16)
|
||||
#define BME680_P8_LSB_REG (19)
|
||||
#define BME680_P8_MSB_REG (20)
|
||||
#define BME680_P9_LSB_REG (21)
|
||||
#define BME680_P9_MSB_REG (22)
|
||||
#define BME680_P10_REG (23)
|
||||
#define BME680_H2_MSB_REG (25)
|
||||
#define BME680_H2_LSB_REG (26)
|
||||
#define BME680_H1_LSB_REG (26)
|
||||
#define BME680_H1_MSB_REG (27)
|
||||
#define BME680_H3_REG (28)
|
||||
#define BME680_H4_REG (29)
|
||||
#define BME680_H5_REG (30)
|
||||
#define BME680_H6_REG (31)
|
||||
#define BME680_H7_REG (32)
|
||||
#define BME680_T1_LSB_REG (33)
|
||||
#define BME680_T1_MSB_REG (34)
|
||||
#define BME680_GH2_LSB_REG (35)
|
||||
#define BME680_GH2_MSB_REG (36)
|
||||
#define BME680_GH1_REG (37)
|
||||
#define BME680_GH3_REG (38)
|
||||
|
||||
/** BME680 register buffer index settings*/
|
||||
#define BME680_REG_FILTER_INDEX UINT8_C(5)
|
||||
#define BME680_REG_TEMP_INDEX UINT8_C(4)
|
||||
#define BME680_REG_PRES_INDEX UINT8_C(4)
|
||||
#define BME680_REG_HUM_INDEX UINT8_C(2)
|
||||
#define BME680_REG_NBCONV_INDEX UINT8_C(1)
|
||||
#define BME680_REG_RUN_GAS_INDEX UINT8_C(1)
|
||||
#define BME680_REG_HCTRL_INDEX UINT8_C(0)
|
||||
|
||||
/** BME680 pressure calculation macros */
|
||||
/*! This max value is used to provide precedence to multiplication or division
|
||||
* in pressure compensation equation to achieve least loss of precision and
|
||||
* avoiding overflows.
|
||||
* i.e Comparing value, BME680_MAX_OVERFLOW_VAL = INT32_C(1 << 30)
|
||||
*/
|
||||
#define BME680_MAX_OVERFLOW_VAL INT32_C(0x40000000)
|
||||
|
||||
/** Macro to combine two 8 bit data's to form a 16 bit data */
|
||||
#define BME680_CONCAT_BYTES(msb, lsb) (((uint16_t)msb << 8) | (uint16_t)lsb)
|
||||
|
||||
/** Macro to SET and GET BITS of a register */
|
||||
#define BME680_SET_BITS(reg_data, bitname, data) \
|
||||
((reg_data & ~(bitname##_MSK)) | \
|
||||
((data << bitname##_POS) & bitname##_MSK))
|
||||
#define BME680_GET_BITS(reg_data, bitname) ((reg_data & (bitname##_MSK)) >> \
|
||||
(bitname##_POS))
|
||||
|
||||
/** Macro variant to handle the bitname position if it is zero */
|
||||
#define BME680_SET_BITS_POS_0(reg_data, bitname, data) \
|
||||
((reg_data & ~(bitname##_MSK)) | \
|
||||
(data & bitname##_MSK))
|
||||
#define BME680_GET_BITS_POS_0(reg_data, bitname) (reg_data & (bitname##_MSK))
|
||||
|
||||
/** Type definitions */
|
||||
/*!
|
||||
* Generic communication function pointer
|
||||
* @param[in] dev_id: Place holder to store the id of the device structure
|
||||
* Can be used to store the index of the Chip select or
|
||||
* I2C address of the device.
|
||||
* @param[in] reg_addr: Used to select the register the where data needs to
|
||||
* be read from or written to.
|
||||
* @param[in/out] reg_data: Data array to read/write
|
||||
* @param[in] len: Length of the data array
|
||||
*/
|
||||
typedef int8_t (*bme680_com_fptr_t)(uint8_t dev_id, uint8_t reg_addr, uint8_t *data, uint16_t len);
|
||||
|
||||
/*!
|
||||
* Delay function pointer
|
||||
* @param[in] period: Time period in milliseconds
|
||||
*/
|
||||
typedef void (*bme680_delay_fptr_t)(uint32_t period);
|
||||
|
||||
/*!
|
||||
* @brief Interface selection Enumerations
|
||||
*/
|
||||
enum bme680_intf {
|
||||
/*! SPI interface */
|
||||
BME680_SPI_INTF,
|
||||
/*! I2C interface */
|
||||
BME680_I2C_INTF
|
||||
};
|
||||
|
||||
/* structure definitions */
|
||||
/*!
|
||||
* @brief Sensor field data structure
|
||||
*/
|
||||
struct bme680_field_data {
|
||||
/*! Contains new_data, gasm_valid & heat_stab */
|
||||
uint8_t status;
|
||||
/*! The index of the heater profile used */
|
||||
uint8_t gas_index;
|
||||
/*! Measurement index to track order */
|
||||
uint8_t meas_index;
|
||||
|
||||
#ifndef BME680_FLOAT_POINT_COMPENSATION
|
||||
/*! Temperature in degree celsius x100 */
|
||||
int16_t temperature;
|
||||
/*! Pressure in Pascal */
|
||||
uint32_t pressure;
|
||||
/*! Humidity in % relative humidity x1000 */
|
||||
uint32_t humidity;
|
||||
/*! Gas resistance in Ohms */
|
||||
uint32_t gas_resistance;
|
||||
#else
|
||||
/*! Temperature in degree celsius */
|
||||
float temperature;
|
||||
/*! Pressure in Pascal */
|
||||
float pressure;
|
||||
/*! Humidity in % relative humidity x1000 */
|
||||
float humidity;
|
||||
/*! Gas resistance in Ohms */
|
||||
float gas_resistance;
|
||||
|
||||
#endif
|
||||
|
||||
};
|
||||
|
||||
/*!
|
||||
* @brief Structure to hold the Calibration data
|
||||
*/
|
||||
struct bme680_calib_data {
|
||||
/*! Variable to store calibrated humidity data */
|
||||
uint16_t par_h1;
|
||||
/*! Variable to store calibrated humidity data */
|
||||
uint16_t par_h2;
|
||||
/*! Variable to store calibrated humidity data */
|
||||
int8_t par_h3;
|
||||
/*! Variable to store calibrated humidity data */
|
||||
int8_t par_h4;
|
||||
/*! Variable to store calibrated humidity data */
|
||||
int8_t par_h5;
|
||||
/*! Variable to store calibrated humidity data */
|
||||
uint8_t par_h6;
|
||||
/*! Variable to store calibrated humidity data */
|
||||
int8_t par_h7;
|
||||
/*! Variable to store calibrated gas data */
|
||||
int8_t par_gh1;
|
||||
/*! Variable to store calibrated gas data */
|
||||
int16_t par_gh2;
|
||||
/*! Variable to store calibrated gas data */
|
||||
int8_t par_gh3;
|
||||
/*! Variable to store calibrated temperature data */
|
||||
uint16_t par_t1;
|
||||
/*! Variable to store calibrated temperature data */
|
||||
int16_t par_t2;
|
||||
/*! Variable to store calibrated temperature data */
|
||||
int8_t par_t3;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
uint16_t par_p1;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int16_t par_p2;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int8_t par_p3;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int16_t par_p4;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int16_t par_p5;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int8_t par_p6;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int8_t par_p7;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int16_t par_p8;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
int16_t par_p9;
|
||||
/*! Variable to store calibrated pressure data */
|
||||
uint8_t par_p10;
|
||||
|
||||
#ifndef BME680_FLOAT_POINT_COMPENSATION
|
||||
/*! Variable to store t_fine size */
|
||||
int32_t t_fine;
|
||||
#else
|
||||
/*! Variable to store t_fine size */
|
||||
float t_fine;
|
||||
#endif
|
||||
/*! Variable to store heater resistance range */
|
||||
uint8_t res_heat_range;
|
||||
/*! Variable to store heater resistance value */
|
||||
int8_t res_heat_val;
|
||||
/*! Variable to store error range */
|
||||
int8_t range_sw_err;
|
||||
};
|
||||
|
||||
/*!
|
||||
* @brief BME680 sensor settings structure which comprises of ODR,
|
||||
* over-sampling and filter settings.
|
||||
*/
|
||||
struct bme680_tph_sett {
|
||||
/*! Humidity oversampling */
|
||||
uint8_t os_hum;
|
||||
/*! Temperature oversampling */
|
||||
uint8_t os_temp;
|
||||
/*! Pressure oversampling */
|
||||
uint8_t os_pres;
|
||||
/*! Filter coefficient */
|
||||
uint8_t filter;
|
||||
};
|
||||
|
||||
/*!
|
||||
* @brief BME680 gas sensor which comprises of gas settings
|
||||
* and status parameters
|
||||
*/
|
||||
struct bme680_gas_sett {
|
||||
/*! Variable to store nb conversion */
|
||||
uint8_t nb_conv;
|
||||
/*! Variable to store heater control */
|
||||
uint8_t heatr_ctrl;
|
||||
/*! Run gas enable value */
|
||||
uint8_t run_gas;
|
||||
/*! Heater temperature value */
|
||||
uint16_t heatr_temp;
|
||||
/*! Duration profile value */
|
||||
uint16_t heatr_dur;
|
||||
};
|
||||
|
||||
/*!
|
||||
* @brief BME680 device structure
|
||||
*/
|
||||
struct bme680_dev {
|
||||
/*! Chip Id */
|
||||
uint8_t chip_id;
|
||||
/*! Device Id */
|
||||
uint8_t dev_id;
|
||||
/*! SPI/I2C interface */
|
||||
enum bme680_intf intf;
|
||||
/*! Memory page used */
|
||||
uint8_t mem_page;
|
||||
/*! Ambient temperature in Degree C */
|
||||
int8_t amb_temp;
|
||||
/*! Sensor calibration data */
|
||||
struct bme680_calib_data calib;
|
||||
/*! Sensor settings */
|
||||
struct bme680_tph_sett tph_sett;
|
||||
/*! Gas Sensor settings */
|
||||
struct bme680_gas_sett gas_sett;
|
||||
/*! Sensor power modes */
|
||||
uint8_t power_mode;
|
||||
/*! New sensor fields */
|
||||
uint8_t new_fields;
|
||||
/*! Store the info messages */
|
||||
uint8_t info_msg;
|
||||
/*! Bus read function pointer */
|
||||
bme680_com_fptr_t read;
|
||||
/*! Bus write function pointer */
|
||||
bme680_com_fptr_t write;
|
||||
/*! delay function pointer */
|
||||
bme680_delay_fptr_t delay_ms;
|
||||
/*! Communication function result */
|
||||
int8_t com_rslt;
|
||||
};
|
||||
|
||||
|
||||
|
||||
#endif /* BME680_DEFS_H_ */
|
||||
/** @}*/
|
||||
/** @}*/
|
||||
@ -1,498 +0,0 @@
|
||||
/**
|
||||
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* Neither the name of the copyright holder nor the names of the
|
||||
* contributors may be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
|
||||
* OR CONTRIBUTORS BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
||||
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
|
||||
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
||||
*
|
||||
* The information provided is believed to be accurate and reliable.
|
||||
* The copyright holder assumes no responsibility
|
||||
* for the consequences of use
|
||||
* of such information nor for any infringement of patents or
|
||||
* other rights of third parties which may result from its use.
|
||||
* No license is granted by implication or otherwise under any patent or
|
||||
* patent rights of the copyright holder.
|
||||
*
|
||||
* @file bsec.cpp
|
||||
* @date 31 Jan 2018
|
||||
* @version 1.0
|
||||
*
|
||||
*/
|
||||
|
||||
#include "bsec.h"
|
||||
|
||||
TwoWire *Bsec::wireObj = NULL;
|
||||
SPIClass *Bsec::spiObj = NULL;
|
||||
|
||||
/**
|
||||
* @brief Constructor
|
||||
*/
|
||||
Bsec::Bsec() {
|
||||
nextCall = 0;
|
||||
version.major = 0;
|
||||
version.minor = 0;
|
||||
version.major_bugfix = 0;
|
||||
version.minor_bugfix = 0;
|
||||
millisOverflowCounter = 0;
|
||||
lastTime = 0;
|
||||
bme680Status = BME680_OK;
|
||||
outputTimestamp = 0;
|
||||
_tempOffset = 0.0f;
|
||||
status = BSEC_OK;
|
||||
zeroOutputs();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to initialize the BSEC library and the BME680 sensor
|
||||
*/
|
||||
void Bsec::begin(uint8_t devId, enum bme680_intf intf, bme680_com_fptr_t read,
|
||||
bme680_com_fptr_t write, bme680_delay_fptr_t idleTask) {
|
||||
_bme680.dev_id = devId;
|
||||
_bme680.intf = intf;
|
||||
_bme680.read = read;
|
||||
_bme680.write = write;
|
||||
_bme680.delay_ms = idleTask;
|
||||
_bme680.amb_temp = 25;
|
||||
_bme680.power_mode = BME680_FORCED_MODE;
|
||||
|
||||
beginCommon();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to initialize the BSEC library and the BME680 sensor
|
||||
*/
|
||||
void Bsec::begin(uint8_t i2cAddr, TwoWire &i2c) {
|
||||
_bme680.dev_id = i2cAddr;
|
||||
_bme680.intf = BME680_I2C_INTF;
|
||||
_bme680.read = Bsec::i2cRead;
|
||||
_bme680.write = Bsec::i2cWrite;
|
||||
_bme680.delay_ms = Bsec::delay_ms;
|
||||
_bme680.amb_temp = 25;
|
||||
_bme680.power_mode = BME680_FORCED_MODE;
|
||||
|
||||
Bsec::wireObj = &i2c;
|
||||
Bsec::wireObj->begin();
|
||||
|
||||
beginCommon();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to initialize the BSEC library and the BME680 sensor
|
||||
*/
|
||||
void Bsec::begin(uint8_t chipSelect, SPIClass &spi) {
|
||||
_bme680.dev_id = chipSelect;
|
||||
_bme680.intf = BME680_SPI_INTF;
|
||||
_bme680.read = Bsec::spiTransfer;
|
||||
_bme680.write = Bsec::spiTransfer;
|
||||
_bme680.delay_ms = Bsec::delay_ms;
|
||||
_bme680.amb_temp = 25;
|
||||
_bme680.power_mode = BME680_FORCED_MODE;
|
||||
|
||||
pinMode(chipSelect, OUTPUT);
|
||||
digitalWrite(chipSelect, HIGH);
|
||||
Bsec::spiObj = &spi;
|
||||
Bsec::spiObj->begin();
|
||||
|
||||
beginCommon();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Common code for the begin function
|
||||
*/
|
||||
void Bsec::beginCommon(void) {
|
||||
status = bsec_init();
|
||||
|
||||
getVersion();
|
||||
|
||||
bme680Status = bme680_init(&_bme680);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function that sets the desired sensors and the sample rates
|
||||
*/
|
||||
void Bsec::updateSubscription(bsec_virtual_sensor_t sensorList[],
|
||||
uint8_t nSensors, float sampleRate) {
|
||||
bsec_sensor_configuration_t virtualSensors[BSEC_NUMBER_OUTPUTS],
|
||||
sensorSettings[BSEC_MAX_PHYSICAL_SENSOR];
|
||||
uint8_t nVirtualSensors = 0, nSensorSettings = BSEC_MAX_PHYSICAL_SENSOR;
|
||||
|
||||
for (uint8_t i = 0; i < nSensors; i++) {
|
||||
virtualSensors[nVirtualSensors].sensor_id = sensorList[i];
|
||||
virtualSensors[nVirtualSensors].sample_rate = sampleRate;
|
||||
nVirtualSensors++;
|
||||
}
|
||||
|
||||
status = bsec_update_subscription(virtualSensors, nVirtualSensors,
|
||||
sensorSettings, &nSensorSettings);
|
||||
return;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Callback from the user to trigger reading of data from the BME680,
|
||||
* process and store outputs
|
||||
*/
|
||||
bool Bsec::run(void) {
|
||||
bool newData = false;
|
||||
/* Check if the time has arrived to call do_steps() */
|
||||
int64_t callTimeMs = getTimeMs();
|
||||
|
||||
if (callTimeMs >= nextCall) {
|
||||
|
||||
bsec_bme_settings_t bme680Settings;
|
||||
|
||||
int64_t callTimeNs = callTimeMs * INT64_C(1000000);
|
||||
|
||||
status = bsec_sensor_control(callTimeNs, &bme680Settings);
|
||||
if (status < BSEC_OK)
|
||||
return false;
|
||||
|
||||
nextCall =
|
||||
bme680Settings.next_call / INT64_C(1000000); // Convert from ns to ms
|
||||
|
||||
bme680Status = setBme680Config(bme680Settings);
|
||||
if (bme680Status != BME680_OK) {
|
||||
return false;
|
||||
}
|
||||
|
||||
bme680Status = bme680_set_sensor_mode(&_bme680);
|
||||
if (bme680Status != BME680_OK) {
|
||||
return false;
|
||||
}
|
||||
|
||||
/* Wait for measurement to complete */
|
||||
uint16_t meas_dur = 0;
|
||||
|
||||
bme680_get_profile_dur(&meas_dur, &_bme680);
|
||||
delay_ms(meas_dur);
|
||||
|
||||
newData = readProcessData(callTimeNs, bme680Settings);
|
||||
}
|
||||
|
||||
return newData;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to get the state of the algorithm to save to non-volatile
|
||||
* memory
|
||||
*/
|
||||
void Bsec::getState(uint8_t *state) {
|
||||
uint8_t workBuffer[BSEC_MAX_STATE_BLOB_SIZE];
|
||||
uint32_t n_serialized_state = BSEC_MAX_STATE_BLOB_SIZE;
|
||||
status = bsec_get_state(0, state, BSEC_MAX_STATE_BLOB_SIZE, workBuffer,
|
||||
BSEC_MAX_STATE_BLOB_SIZE, &n_serialized_state);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to set the state of the algorithm from non-volatile memory
|
||||
*/
|
||||
void Bsec::setState(uint8_t *state) {
|
||||
uint8_t workBuffer[BSEC_MAX_STATE_BLOB_SIZE];
|
||||
|
||||
status = bsec_set_state(state, BSEC_MAX_STATE_BLOB_SIZE, workBuffer,
|
||||
BSEC_MAX_STATE_BLOB_SIZE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to set the configuration of the algorithm from memory
|
||||
*/
|
||||
void Bsec::setConfig(const uint8_t *state) {
|
||||
uint8_t workBuffer[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
|
||||
status = bsec_set_configuration(state, BSEC_MAX_PROPERTY_BLOB_SIZE,
|
||||
workBuffer, sizeof(workBuffer));
|
||||
}
|
||||
|
||||
/* Private functions */
|
||||
|
||||
/**
|
||||
* @brief Get the version of the BSEC library
|
||||
*/
|
||||
void Bsec::getVersion(void) { bsec_get_version(&version); }
|
||||
|
||||
/**
|
||||
* @brief Read data from the BME680 and process it
|
||||
*/
|
||||
bool Bsec::readProcessData(int64_t currTimeNs,
|
||||
bsec_bme_settings_t bme680Settings) {
|
||||
bme680Status = bme680_get_sensor_data(&_data, &_bme680);
|
||||
if (bme680Status != BME680_OK) {
|
||||
return false;
|
||||
}
|
||||
|
||||
bsec_input_t inputs[BSEC_MAX_PHYSICAL_SENSOR]; // Temp, Pres, Hum & Gas
|
||||
uint8_t nInputs = 0, nOutputs = 0;
|
||||
|
||||
if (_data.status & BME680_NEW_DATA_MSK) {
|
||||
if (bme680Settings.process_data & BSEC_PROCESS_TEMPERATURE) {
|
||||
inputs[nInputs].sensor_id = BSEC_INPUT_TEMPERATURE;
|
||||
#ifdef BME680_FLOAT_POINT_COMPENSATION
|
||||
inputs[nInputs].signal = _data.temperature;
|
||||
#else
|
||||
inputs[nInputs].signal = _data.temperature / 100.0f;
|
||||
#endif
|
||||
inputs[nInputs].time_stamp = currTimeNs;
|
||||
nInputs++;
|
||||
/* Temperature offset from the real temperature due to external heat
|
||||
* sources */
|
||||
inputs[nInputs].sensor_id = BSEC_INPUT_HEATSOURCE;
|
||||
inputs[nInputs].signal = _tempOffset;
|
||||
inputs[nInputs].time_stamp = currTimeNs;
|
||||
nInputs++;
|
||||
}
|
||||
if (bme680Settings.process_data & BSEC_PROCESS_HUMIDITY) {
|
||||
inputs[nInputs].sensor_id = BSEC_INPUT_HUMIDITY;
|
||||
#ifdef BME680_FLOAT_POINT_COMPENSATION
|
||||
inputs[nInputs].signal = _data.humidity;
|
||||
#else
|
||||
inputs[nInputs].signal = _data.humidity / 1000.0f;
|
||||
#endif
|
||||
inputs[nInputs].time_stamp = currTimeNs;
|
||||
nInputs++;
|
||||
}
|
||||
if (bme680Settings.process_data & BSEC_PROCESS_PRESSURE) {
|
||||
inputs[nInputs].sensor_id = BSEC_INPUT_PRESSURE;
|
||||
inputs[nInputs].signal = _data.pressure;
|
||||
inputs[nInputs].time_stamp = currTimeNs;
|
||||
nInputs++;
|
||||
}
|
||||
if (bme680Settings.process_data & BSEC_PROCESS_GAS) {
|
||||
inputs[nInputs].sensor_id = BSEC_INPUT_GASRESISTOR;
|
||||
inputs[nInputs].signal = _data.gas_resistance;
|
||||
inputs[nInputs].time_stamp = currTimeNs;
|
||||
nInputs++;
|
||||
}
|
||||
}
|
||||
|
||||
if (nInputs > 0) {
|
||||
nOutputs = BSEC_NUMBER_OUTPUTS;
|
||||
bsec_output_t _outputs[BSEC_NUMBER_OUTPUTS];
|
||||
|
||||
status = bsec_do_steps(inputs, nInputs, _outputs, &nOutputs);
|
||||
if (status != BSEC_OK)
|
||||
return false;
|
||||
|
||||
zeroOutputs();
|
||||
|
||||
if (nOutputs > 0) {
|
||||
outputTimestamp =
|
||||
_outputs[0].time_stamp / 1000000; // Convert from ns to ms
|
||||
|
||||
for (uint8_t i = 0; i < nOutputs; i++) {
|
||||
switch (_outputs[i].sensor_id) {
|
||||
case BSEC_OUTPUT_IAQ:
|
||||
iaqEstimate = _outputs[i].signal;
|
||||
iaqAccuracy = _outputs[i].accuracy;
|
||||
break;
|
||||
case BSEC_OUTPUT_STATIC_IAQ:
|
||||
staticIaq = _outputs[i].signal;
|
||||
staticIaqAccuracy = _outputs[i].accuracy;
|
||||
break;
|
||||
case BSEC_OUTPUT_CO2_EQUIVALENT:
|
||||
co2Equivalent = _outputs[i].signal;
|
||||
co2Accuracy = _outputs[i].accuracy;
|
||||
break;
|
||||
case BSEC_OUTPUT_BREATH_VOC_EQUIVALENT:
|
||||
breathVocEquivalent = _outputs[i].signal;
|
||||
breathVocAccuracy = _outputs[i].accuracy;
|
||||
break;
|
||||
case BSEC_OUTPUT_RAW_TEMPERATURE:
|
||||
rawTemperature = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_RAW_PRESSURE:
|
||||
pressure = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_RAW_HUMIDITY:
|
||||
rawHumidity = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_RAW_GAS:
|
||||
gasResistance = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_STABILIZATION_STATUS:
|
||||
stabStatus = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_RUN_IN_STATUS:
|
||||
runInStatus = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE:
|
||||
temperature = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY:
|
||||
humidity = _outputs[i].signal;
|
||||
break;
|
||||
case BSEC_OUTPUT_COMPENSATED_GAS:
|
||||
compGasValue = _outputs[i].signal;
|
||||
compGasAccuracy = _outputs[i].accuracy;
|
||||
break;
|
||||
case BSEC_OUTPUT_GAS_PERCENTAGE:
|
||||
gasPercentage = _outputs[i].signal;
|
||||
gasPercentageAcccuracy = _outputs[i].accuracy;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the BME680 sensor's configuration
|
||||
*/
|
||||
int8_t Bsec::setBme680Config(bsec_bme_settings_t bme680Settings) {
|
||||
_bme680.gas_sett.run_gas = bme680Settings.run_gas;
|
||||
_bme680.tph_sett.os_hum = bme680Settings.humidity_oversampling;
|
||||
_bme680.tph_sett.os_temp = bme680Settings.temperature_oversampling;
|
||||
_bme680.tph_sett.os_pres = bme680Settings.pressure_oversampling;
|
||||
_bme680.gas_sett.heatr_temp = bme680Settings.heater_temperature;
|
||||
_bme680.gas_sett.heatr_dur = bme680Settings.heating_duration;
|
||||
uint16_t desired_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL |
|
||||
BME680_FILTER_SEL | BME680_GAS_SENSOR_SEL;
|
||||
return bme680_set_sensor_settings(desired_settings, &_bme680);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to zero the outputs
|
||||
*/
|
||||
void Bsec::zeroOutputs(void) {
|
||||
temperature = 0.0f;
|
||||
pressure = 0.0f;
|
||||
humidity = 0.0f;
|
||||
gasResistance = 0.0f;
|
||||
rawTemperature = 0.0f;
|
||||
rawHumidity = 0.0f;
|
||||
stabStatus = 0.0f;
|
||||
runInStatus = 0.0f;
|
||||
iaqEstimate = 0.0f;
|
||||
iaqAccuracy = 0;
|
||||
staticIaq = 0.0f;
|
||||
staticIaqAccuracy = 0;
|
||||
co2Equivalent = 0.0f;
|
||||
co2Accuracy = 0;
|
||||
breathVocEquivalent = 0.0f;
|
||||
breathVocAccuracy = 0;
|
||||
compGasValue = 0.0f;
|
||||
compGasAccuracy = 0;
|
||||
gasPercentage = 0.0f;
|
||||
gasPercentageAcccuracy = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Function to calculate an int64_t timestamp in milliseconds
|
||||
*/
|
||||
int64_t Bsec::getTimeMs(void) {
|
||||
int64_t timeMs = millis();
|
||||
|
||||
if (lastTime > timeMs) { // An overflow occured
|
||||
lastTime = timeMs;
|
||||
millisOverflowCounter++;
|
||||
}
|
||||
|
||||
return timeMs + (millisOverflowCounter * 0xFFFFFFFF);
|
||||
}
|
||||
|
||||
/**
|
||||
@brief Task that delays for a ms period of time
|
||||
*/
|
||||
void Bsec::delay_ms(uint32_t period) {
|
||||
// Wait for a period amount of ms
|
||||
// The system may simply idle, sleep or even perform background tasks
|
||||
delay(period);
|
||||
}
|
||||
|
||||
/**
|
||||
@brief Callback function for reading registers over I2C
|
||||
*/
|
||||
int8_t Bsec::i2cRead(uint8_t devId, uint8_t regAddr, uint8_t *regData,
|
||||
uint16_t length) {
|
||||
uint16_t i;
|
||||
int8_t rslt = 0;
|
||||
if (Bsec::wireObj) {
|
||||
Bsec::wireObj->beginTransmission(devId);
|
||||
Bsec::wireObj->write(regAddr);
|
||||
rslt = Bsec::wireObj->endTransmission();
|
||||
Bsec::wireObj->requestFrom((int)devId, (int)length);
|
||||
for (i = 0; (i < length) && Bsec::wireObj->available(); i++) {
|
||||
regData[i] = Bsec::wireObj->read();
|
||||
}
|
||||
} else {
|
||||
rslt = -1;
|
||||
}
|
||||
return rslt;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Callback function for writing registers over I2C
|
||||
*/
|
||||
int8_t Bsec::i2cWrite(uint8_t devId, uint8_t regAddr, uint8_t *regData,
|
||||
uint16_t length) {
|
||||
uint16_t i;
|
||||
int8_t rslt = 0;
|
||||
if (Bsec::wireObj) {
|
||||
Bsec::wireObj->beginTransmission(devId);
|
||||
Bsec::wireObj->write(regAddr);
|
||||
for (i = 0; i < length; i++) {
|
||||
Bsec::wireObj->write(regData[i]);
|
||||
}
|
||||
rslt = Bsec::wireObj->endTransmission();
|
||||
} else {
|
||||
rslt = -1;
|
||||
}
|
||||
|
||||
return rslt;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Callback function for reading and writing registers over SPI
|
||||
*/
|
||||
int8_t Bsec::spiTransfer(uint8_t devId, uint8_t regAddr, uint8_t *regData,
|
||||
uint16_t length) {
|
||||
int8_t rslt = 0;
|
||||
if (Bsec::spiObj) {
|
||||
Bsec::spiObj->beginTransaction(
|
||||
SPISettings(4000000, MSBFIRST, SPI_MODE0)); // Can be upto 10MHz
|
||||
|
||||
digitalWrite(devId, LOW);
|
||||
|
||||
Bsec::spiObj->transfer(
|
||||
regAddr); // Write the register address, ignore the return
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
regData[i] = Bsec::spiObj->transfer(regData[i]);
|
||||
|
||||
digitalWrite(devId, HIGH);
|
||||
Bsec::spiObj->endTransaction();
|
||||
} else {
|
||||
rslt = -1;
|
||||
}
|
||||
|
||||
return rslt;
|
||||
;
|
||||
}
|
||||
@ -1,230 +0,0 @@
|
||||
/**
|
||||
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* Neither the name of the copyright holder nor the names of the
|
||||
* contributors may be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
|
||||
* OR CONTRIBUTORS BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
||||
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
|
||||
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
||||
*
|
||||
* The information provided is believed to be accurate and reliable.
|
||||
* The copyright holder assumes no responsibility
|
||||
* for the consequences of use
|
||||
* of such information nor for any infringement of patents or
|
||||
* other rights of third parties which may result from its use.
|
||||
* No license is granted by implication or otherwise under any patent or
|
||||
* patent rights of the copyright holder.
|
||||
*
|
||||
* @file bsec.h
|
||||
* @date 31 Jan 2018
|
||||
* @version 1.0
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef BSEC_CLASS_H
|
||||
#define BSEC_CLASS_H
|
||||
|
||||
/* Includes */
|
||||
#include "Arduino.h"
|
||||
#include "Wire.h"
|
||||
#include "SPI.h"
|
||||
#include "inc/bsec_datatypes.h"
|
||||
#include "inc/bsec_interface.h"
|
||||
#include "bme680/bme680.h"
|
||||
|
||||
/* BSEC class definition */
|
||||
class Bsec
|
||||
{
|
||||
public:
|
||||
/* Public variables */
|
||||
bsec_version_t version; // Stores the version of the BSEC algorithm
|
||||
int64_t nextCall; // Stores the time when the algorithm has to be called next in ms
|
||||
int8_t bme680Status; // Placeholder for the BME680 driver's error codes
|
||||
bsec_library_return_t status;
|
||||
float iaqEstimate, rawTemperature, pressure, rawHumidity, gasResistance, stabStatus, runInStatus, temperature, humidity,
|
||||
staticIaq, co2Equivalent, breathVocEquivalent, compGasValue, gasPercentage;
|
||||
uint8_t iaqAccuracy, staticIaqAccuracy, co2Accuracy, breathVocAccuracy, compGasAccuracy, gasPercentageAcccuracy;
|
||||
int64_t outputTimestamp; // Timestamp in ms of the output
|
||||
static TwoWire *wireObj;
|
||||
static SPIClass *spiObj;
|
||||
|
||||
/* Public APIs */
|
||||
/**
|
||||
* @brief Constructor
|
||||
*/
|
||||
Bsec();
|
||||
|
||||
/**
|
||||
* @brief Function to initialize the BSEC library and the BME680 sensor
|
||||
* @param devId : Device identifier parameter for the read/write interface functions
|
||||
* @param intf : Physical communication interface
|
||||
* @param read : Pointer to the read function
|
||||
* @param write : Pointer to the write function
|
||||
* @param idleTask : Pointer to the idling task
|
||||
*/
|
||||
void begin(uint8_t devId, enum bme680_intf intf, bme680_com_fptr_t read, bme680_com_fptr_t write, bme680_delay_fptr_t idleTask);
|
||||
|
||||
/**
|
||||
* @brief Function to initialize the BSEC library and the BME680 sensor
|
||||
* @param i2cAddr : I2C address
|
||||
* @param i2c : Pointer to the TwoWire object
|
||||
*/
|
||||
void begin(uint8_t i2cAddr, TwoWire &i2c);
|
||||
|
||||
/**
|
||||
* @brief Function to initialize the BSEC library and the BME680 sensor
|
||||
* @param chipSelect : SPI chip select
|
||||
* @param spi : Pointer to the SPIClass object
|
||||
*/
|
||||
void begin(uint8_t chipSelect, SPIClass &spi);
|
||||
|
||||
/**
|
||||
* @brief Function that sets the desired sensors and the sample rates
|
||||
* @param sensorList : The list of output sensors
|
||||
* @param nSensors : Number of outputs requested
|
||||
* @param sampleRate : The sample rate of requested sensors
|
||||
*/
|
||||
void updateSubscription(bsec_virtual_sensor_t sensorList[], uint8_t nSensors, float sampleRate = BSEC_SAMPLE_RATE_ULP);
|
||||
|
||||
/**
|
||||
* @brief Callback from the user to trigger reading of data from the BME680, process and store outputs
|
||||
* @return true if there are new outputs. false otherwise
|
||||
*/
|
||||
bool run(void);
|
||||
|
||||
/**
|
||||
* @brief Function to get the state of the algorithm to save to non-volatile memory
|
||||
* @param state : Pointer to a memory location that contains the state
|
||||
*/
|
||||
void getState(uint8_t *state);
|
||||
|
||||
/**
|
||||
* @brief Function to set the state of the algorithm from non-volatile memory
|
||||
* @param state : Pointer to a memory location that contains the state
|
||||
*/
|
||||
void setState(uint8_t *state);
|
||||
|
||||
/**
|
||||
* @brief Function to set the configuration of the algorithm from memory
|
||||
* @param state : Pointer to a memory location that contains the configuration
|
||||
*/
|
||||
void setConfig(const uint8_t *config);
|
||||
|
||||
/**
|
||||
* @brief Function to set the temperature offset
|
||||
* @param tempOffset : Temperature offset in degree Celsius
|
||||
*/
|
||||
void setTemperatureOffset(float tempOffset)
|
||||
{
|
||||
_tempOffset = tempOffset;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Function to calculate an int64_t timestamp in milliseconds
|
||||
*/
|
||||
int64_t getTimeMs(void);
|
||||
|
||||
/**
|
||||
* @brief Task that delays for a ms period of time
|
||||
* @param period : Period of time in ms
|
||||
*/
|
||||
static void delay_ms(uint32_t period);
|
||||
|
||||
/**
|
||||
* @brief Callback function for reading registers over I2C
|
||||
* @param devId : Library agnostic parameter to identify the device to communicate with
|
||||
* @param regAddr : Register address
|
||||
* @param regData : Pointer to the array containing the data to be read
|
||||
* @param length : Length of the array of data
|
||||
* @return Zero for success, non-zero otherwise
|
||||
*/
|
||||
static int8_t i2cRead(uint8_t devId, uint8_t regAddr, uint8_t *regData, uint16_t length);
|
||||
|
||||
/**
|
||||
* @brief Callback function for writing registers over I2C
|
||||
* @param devId : Library agnostic parameter to identify the device to communicate with
|
||||
* @param regAddr : Register address
|
||||
* @param regData : Pointer to the array containing the data to be written
|
||||
* @param length : Length of the array of data
|
||||
* @return Zero for success, non-zero otherwise
|
||||
*/
|
||||
static int8_t i2cWrite(uint8_t devId, uint8_t regAddr, uint8_t *regData, uint16_t length);
|
||||
|
||||
/**
|
||||
* @brief Callback function for reading and writing registers over SPI
|
||||
* @param devId : Library agnostic parameter to identify the device to communicate with
|
||||
* @param regAddr : Register address
|
||||
* @param regData : Pointer to the array containing the data to be read or written
|
||||
* @param length : Length of the array of data
|
||||
* @return Zero for success, non-zero otherwise
|
||||
*/
|
||||
static int8_t spiTransfer(uint8_t devId, uint8_t regAddr, uint8_t *regData, uint16_t length);
|
||||
|
||||
private:
|
||||
/* Private variables */
|
||||
struct bme680_dev _bme680;
|
||||
struct bme680_field_data _data;
|
||||
float _tempOffset;
|
||||
// Global variables to help create a millisecond timestamp that doesn't overflow every 51 days.
|
||||
// If it overflows, it will have a negative value. Something that should never happen.
|
||||
uint32_t millisOverflowCounter;
|
||||
uint32_t lastTime;
|
||||
|
||||
/* Private APIs */
|
||||
/**
|
||||
* @brief Get the version of the BSEC library
|
||||
*/
|
||||
void getVersion(void);
|
||||
|
||||
/**
|
||||
* @brief Read data from the BME680 and process it
|
||||
* @param currTimeNs: Current time in ns
|
||||
* @param bme680Settings: BME680 sensor's settings
|
||||
* @return true if there are new outputs. false otherwise
|
||||
*/
|
||||
bool readProcessData(int64_t currTimeNs, bsec_bme_settings_t bme680Settings);
|
||||
|
||||
/**
|
||||
* @brief Set the BME680 sensor's configuration
|
||||
* @param bme680Settings: Settings to configure the BME680
|
||||
* @return BME680 return code. BME680_OK for success, failure otherwise
|
||||
*/
|
||||
int8_t setBme680Config(bsec_bme_settings_t bme680Settings);
|
||||
|
||||
/**
|
||||
* @brief Common code for the begin function
|
||||
*/
|
||||
void beginCommon(void);
|
||||
|
||||
/**
|
||||
* @brief Function to zero the outputs
|
||||
*/
|
||||
void zeroOutputs(void);
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -1,488 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2015, 2016, 2017 Robert Bosch. All Rights Reserved.
|
||||
*
|
||||
* Disclaimer
|
||||
*
|
||||
* Common:
|
||||
* Bosch Sensortec products are developed for the consumer goods industry. They may only be used
|
||||
* within the parameters of the respective valid product data sheet. Bosch Sensortec products are
|
||||
* provided with the express understanding that there is no warranty of fitness for a particular purpose.
|
||||
* They are not fit for use in life-sustaining, safety or security sensitive systems or any system or device
|
||||
* that may lead to bodily harm or property damage if the system or device malfunctions. In addition,
|
||||
* Bosch Sensortec products are not fit for use in products which interact with motor vehicle systems.
|
||||
* The resale and/or use of products are at the purchasers own risk and his own responsibility. The
|
||||
* examination of fitness for the intended use is the sole responsibility of the Purchaser.
|
||||
*
|
||||
* The purchaser shall indemnify Bosch Sensortec from all third party claims, including any claims for
|
||||
* incidental, or consequential damages, arising from any product use not covered by the parameters of
|
||||
* the respective valid product data sheet or not approved by Bosch Sensortec and reimburse Bosch
|
||||
* Sensortec for all costs in connection with such claims.
|
||||
*
|
||||
* The purchaser must monitor the market for the purchased products, particularly with regard to
|
||||
* product safety and inform Bosch Sensortec without delay of all security relevant incidents.
|
||||
*
|
||||
* Engineering Samples are marked with an asterisk (*) or (e). Samples may vary from the valid
|
||||
* technical specifications of the product series. They are therefore not intended or fit for resale to third
|
||||
* parties or for use in end products. Their sole purpose is internal client testing. The testing of an
|
||||
* engineering sample may in no way replace the testing of a product series. Bosch Sensortec
|
||||
* assumes no liability for the use of engineering samples. By accepting the engineering samples, the
|
||||
* Purchaser agrees to indemnify Bosch Sensortec from all claims arising from the use of engineering
|
||||
* samples.
|
||||
*
|
||||
* Special:
|
||||
* This software module (hereinafter called "Software") and any information on application-sheets
|
||||
* (hereinafter called "Information") is provided free of charge for the sole purpose to support your
|
||||
* application work. The Software and Information is subject to the following terms and conditions:
|
||||
*
|
||||
* The Software is specifically designed for the exclusive use for Bosch Sensortec products by
|
||||
* personnel who have special experience and training. Do not use this Software if you do not have the
|
||||
* proper experience or training.
|
||||
*
|
||||
* This Software package is provided `` as is `` and without any expressed or implied warranties,
|
||||
* including without limitation, the implied warranties of merchantability and fitness for a particular
|
||||
* purpose.
|
||||
*
|
||||
* Bosch Sensortec and their representatives and agents deny any liability for the functional impairment
|
||||
* of this Software in terms of fitness, performance and safety. Bosch Sensortec and their
|
||||
* representatives and agents shall not be liable for any direct or indirect damages or injury, except as
|
||||
* otherwise stipulated in mandatory applicable law.
|
||||
*
|
||||
* The Information provided is believed to be accurate and reliable. Bosch Sensortec assumes no
|
||||
* responsibility for the consequences of use of such Information nor for any infringement of patents or
|
||||
* other rights of third parties which may result from its use. No license is granted by implication or
|
||||
* otherwise under any patent or patent rights of Bosch. Specifications mentioned in the Information are
|
||||
* subject to change without notice.
|
||||
*
|
||||
* It is not allowed to deliver the source code of the Software to any third party without permission of
|
||||
* Bosch Sensortec.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file bsec_datatypes.h
|
||||
*
|
||||
* @brief
|
||||
* Contains the data types used by BSEC
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __BSEC_DATATYPES_H__
|
||||
#define __BSEC_DATATYPES_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @addtogroup bsec_interface BSEC C Interface
|
||||
* @{*/
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#include <linux/types.h>
|
||||
#endif
|
||||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
|
||||
#define BSEC_MAX_WORKBUFFER_SIZE (2048) /*!< Maximum size (in bytes) of the work buffer */
|
||||
#define BSEC_MAX_PHYSICAL_SENSOR (8) /*!< Number of physical sensors that need allocated space before calling bsec_update_subscription() */
|
||||
#define BSEC_MAX_PROPERTY_BLOB_SIZE (454) /*!< Maximum size (in bytes) of the data blobs returned by bsec_get_configuration() */
|
||||
#define BSEC_MAX_STATE_BLOB_SIZE (139) /*!< Maximum size (in bytes) of the data blobs returned by bsec_get_state()*/
|
||||
#define BSEC_SAMPLE_RATE_DISABLED (65535.0f) /*!< Sample rate of a disabled sensor */
|
||||
#define BSEC_SAMPLE_RATE_ULP (0.0033333f) /*!< Sample rate in case of Ultra Low Power Mode */
|
||||
#define BSEC_SAMPLE_RATE_LP (0.33333f) /*!< Sample rate in case of Low Power Mode */
|
||||
#define BSEC_SAMPLE_RATE_ULP_MEASUREMENT_ON_DEMAND (0.0f) /*!< Input value used to trigger an extra measurment (ULP plus) */
|
||||
|
||||
#define BSEC_PROCESS_PRESSURE (1 << (BSEC_INPUT_PRESSURE-1)) /*!< process_data bitfield constant for pressure @sa bsec_bme_settings_t */
|
||||
#define BSEC_PROCESS_TEMPERATURE (1 << (BSEC_INPUT_TEMPERATURE-1)) /*!< process_data bitfield constant for temperature @sa bsec_bme_settings_t */
|
||||
#define BSEC_PROCESS_HUMIDITY (1 << (BSEC_INPUT_HUMIDITY-1)) /*!< process_data bitfield constant for humidity @sa bsec_bme_settings_t */
|
||||
#define BSEC_PROCESS_GAS (1 << (BSEC_INPUT_GASRESISTOR-1)) /*!< process_data bitfield constant for gas sensor @sa bsec_bme_settings_t */
|
||||
#define BSEC_NUMBER_OUTPUTS (14) /*!< Number of outputs, depending on solution */
|
||||
#define BSEC_OUTPUT_INCLUDED (1210863) /*!< bitfield that indicates which outputs are included in the solution */
|
||||
|
||||
/*!
|
||||
* @brief Enumeration for input (physical) sensors.
|
||||
*
|
||||
* Used to populate bsec_input_t::sensor_id. It is also used in bsec_sensor_configuration_t::sensor_id structs
|
||||
* returned in the parameter required_sensor_settings of bsec_update_subscription().
|
||||
*
|
||||
* @sa bsec_sensor_configuration_t @sa bsec_input_t
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
/**
|
||||
* @brief Pressure sensor output of BMExxx [Pa]
|
||||
*/
|
||||
BSEC_INPUT_PRESSURE = 1,
|
||||
|
||||
/**
|
||||
* @brief Humidity sensor output of BMExxx [%]
|
||||
*
|
||||
* @note Relative humidity strongly depends on the temperature (it is measured at). It may require a conversion to
|
||||
* the temperature outside of the device.
|
||||
*
|
||||
* @sa bsec_virtual_sensor_t
|
||||
*/
|
||||
BSEC_INPUT_HUMIDITY = 2,
|
||||
|
||||
/**
|
||||
* @brief Temperature sensor output of BMExxx [degrees Celsius]
|
||||
*
|
||||
* @note The BME680 is factory trimmed, thus the temperature sensor of the BME680 is very accurate.
|
||||
* The temperature value is a very local measurement value and can be influenced by external heat sources.
|
||||
*
|
||||
* @sa bsec_virtual_sensor_t
|
||||
*/
|
||||
BSEC_INPUT_TEMPERATURE = 3,
|
||||
|
||||
/**
|
||||
* @brief Gas sensor resistance output of BMExxx [Ohm]
|
||||
*
|
||||
* The resistance value changes due to varying VOC concentrations (the higher the concentration of reducing VOCs,
|
||||
* the lower the resistance and vice versa).
|
||||
*/
|
||||
BSEC_INPUT_GASRESISTOR = 4, /*!< */
|
||||
|
||||
/**
|
||||
* @brief Additional input for device heat compensation
|
||||
*
|
||||
* IAQ solution: The value is subtracted from ::BSEC_INPUT_TEMPERATURE to compute
|
||||
* ::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE.
|
||||
*
|
||||
* ALL solution: Generic heat source 1
|
||||
*
|
||||
* @sa bsec_virtual_sensor_t
|
||||
*/
|
||||
BSEC_INPUT_HEATSOURCE = 14,
|
||||
|
||||
/**
|
||||
* @brief Additional input for device heat compensation 8
|
||||
*
|
||||
* Generic heat source 8
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @brief Additional input that disables baseline tracker
|
||||
*
|
||||
* 0 - Normal
|
||||
* 1 - Event 1
|
||||
* 2 - Event 2
|
||||
*/
|
||||
BSEC_INPUT_DISABLE_BASELINE_TRACKER = 23,
|
||||
|
||||
} bsec_physical_sensor_t;
|
||||
|
||||
/*!
|
||||
* @brief Enumeration for output (virtual) sensors
|
||||
*
|
||||
* Used to populate bsec_output_t::sensor_id. It is also used in bsec_sensor_configuration_t::sensor_id structs
|
||||
* passed in the parameter requested_virtual_sensors of bsec_update_subscription().
|
||||
*
|
||||
* @sa bsec_sensor_configuration_t @sa bsec_output_t
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
/**
|
||||
* @brief Indoor-air-quality estimate [0-500]
|
||||
*
|
||||
* Indoor-air-quality (IAQ) gives an indication of the relative change in ambient TVOCs detected by BME680.
|
||||
*
|
||||
* @note The IAQ scale ranges from 0 (clean air) to 500 (heavily polluted air). During operation, algorithms
|
||||
* automatically calibrate and adapt themselves to the typical environments where the sensor is operated
|
||||
* (e.g., home, workplace, inside a car, etc.).This automatic background calibration ensures that users experience
|
||||
* consistent IAQ performance. The calibration process considers the recent measurement history (typ. up to four
|
||||
* days) to ensure that IAQ=25 corresponds to typical good air and IAQ=250 indicates typical polluted air.
|
||||
*/
|
||||
BSEC_OUTPUT_IAQ = 1,
|
||||
BSEC_OUTPUT_STATIC_IAQ = 2, /*!< Unscaled indoor-air-quality estimate */
|
||||
BSEC_OUTPUT_CO2_EQUIVALENT = 3, /*!< co2 equivalent estimate [ppm] */
|
||||
BSEC_OUTPUT_BREATH_VOC_EQUIVALENT = 4, /*!< breath VOC concentration estimate [ppm] */
|
||||
|
||||
/**
|
||||
* @brief Temperature sensor signal [degrees Celsius]
|
||||
*
|
||||
* Temperature directly measured by BME680 in degree Celsius.
|
||||
*
|
||||
* @note This value is cross-influenced by the sensor heating and device specific heating.
|
||||
*/
|
||||
BSEC_OUTPUT_RAW_TEMPERATURE = 6,
|
||||
|
||||
/**
|
||||
* @brief Pressure sensor signal [Pa]
|
||||
*
|
||||
* Pressure directly measured by the BME680 in Pa.
|
||||
*/
|
||||
BSEC_OUTPUT_RAW_PRESSURE = 7,
|
||||
|
||||
/**
|
||||
* @brief Relative humidity sensor signal [%]
|
||||
*
|
||||
* Relative humidity directly measured by the BME680 in %.
|
||||
*
|
||||
* @note This value is cross-influenced by the sensor heating and device specific heating.
|
||||
*/
|
||||
BSEC_OUTPUT_RAW_HUMIDITY = 8,
|
||||
|
||||
/**
|
||||
* @brief Gas sensor signal [Ohm]
|
||||
*
|
||||
* Gas resistance measured directly by the BME680 in Ohm.The resistance value changes due to varying VOC
|
||||
* concentrations (the higher the concentration of reducing VOCs, the lower the resistance and vice versa).
|
||||
*/
|
||||
BSEC_OUTPUT_RAW_GAS = 9,
|
||||
|
||||
/**
|
||||
* @brief Gas sensor stabilization status [boolean]
|
||||
*
|
||||
* Indicates initial stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization
|
||||
* is finished (1).
|
||||
*/
|
||||
BSEC_OUTPUT_STABILIZATION_STATUS = 12,
|
||||
|
||||
/**
|
||||
* @brief Gas sensor run-in status [boolean]
|
||||
*
|
||||
* Indicates power-on stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization
|
||||
* is finished (1).
|
||||
*/
|
||||
BSEC_OUTPUT_RUN_IN_STATUS = 13,
|
||||
|
||||
/**
|
||||
* @brief Sensor heat compensated temperature [degrees Celsius]
|
||||
*
|
||||
* Temperature measured by BME680 which is compensated for the influence of sensor (heater) in degree Celsius.
|
||||
* The self heating introduced by the heater is depending on the sensor operation mode and the sensor supply voltage.
|
||||
*
|
||||
*
|
||||
* @note IAQ solution: In addition, the temperature output can be compensated by an user defined value
|
||||
* (::BSEC_INPUT_HEATSOURCE in degrees Celsius), which represents the device specific self-heating.
|
||||
*
|
||||
* Thus, the value is calculated as follows:
|
||||
* * IAQ solution: ```BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE = ::BSEC_INPUT_TEMPERATURE - function(sensor operation mode, sensor supply voltage) - ::BSEC_INPUT_HEATSOURCE```
|
||||
* * other solutions: ```::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE = ::BSEC_INPUT_TEMPERATURE - function(sensor operation mode, sensor supply voltage)```
|
||||
*
|
||||
* The self-heating in operation mode BSEC_SAMPLE_RATE_ULP is negligible.
|
||||
* The self-heating in operation mode BSEC_SAMPLE_RATE_LP is supported for 1.8V by default (no config file required). If the BME680 sensor supply voltage is 3.3V, the IoT_LP_3_3V.config shall be used.
|
||||
*/
|
||||
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE = 14,
|
||||
|
||||
/**
|
||||
* @brief Sensor heat compensated humidity [%]
|
||||
*
|
||||
* Relative measured by BME680 which is compensated for the influence of sensor (heater) in %.
|
||||
*
|
||||
* It converts the ::BSEC_INPUT_HUMIDITY from temperature ::BSEC_INPUT_TEMPERATURE to temperature
|
||||
* ::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE.
|
||||
*
|
||||
* @note IAQ solution: If ::BSEC_INPUT_HEATSOURCE is used for device specific temperature compensation, it will be
|
||||
* effective for ::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY too.
|
||||
*/
|
||||
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY = 15,
|
||||
|
||||
BSEC_OUTPUT_COMPENSATED_GAS = 18, /*!< Reserved internal debug output */
|
||||
BSEC_OUTPUT_GAS_PERCENTAGE = 21 /*!< percentage of min and max filtered gas value [%] */
|
||||
} bsec_virtual_sensor_t;
|
||||
|
||||
/*!
|
||||
* @brief Enumeration for function return codes
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
BSEC_OK = 0, /*!< Function execution successful */
|
||||
BSEC_E_DOSTEPS_INVALIDINPUT = -1, /*!< Input (physical) sensor id passed to bsec_do_steps() is not in the valid range or not valid for requested virtual sensor */
|
||||
BSEC_E_DOSTEPS_VALUELIMITS = -2, /*!< Value of input (physical) sensor signal passed to bsec_do_steps() is not in the valid range */
|
||||
BSEC_E_DOSTEPS_DUPLICATEINPUT = -6, /*!< Duplicate input (physical) sensor ids passed as input to bsec_do_steps() */
|
||||
BSEC_I_DOSTEPS_NOOUTPUTSRETURNABLE = 2, /*!< No memory allocated to hold return values from bsec_do_steps(), i.e., n_outputs == 0 */
|
||||
BSEC_W_DOSTEPS_EXCESSOUTPUTS = 3, /*!< Not enough memory allocated to hold return values from bsec_do_steps(), i.e., n_outputs < maximum number of requested output (virtual) sensors */
|
||||
BSEC_W_DOSTEPS_TSINTRADIFFOUTOFRANGE = 4, /*!< Duplicate timestamps passed to bsec_do_steps() */
|
||||
BSEC_E_SU_WRONGDATARATE = -10, /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() is zero */
|
||||
BSEC_E_SU_SAMPLERATELIMITS = -12, /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() does not match with the sampling rate allowed for that sensor */
|
||||
BSEC_E_SU_DUPLICATEGATE = -13, /*!< Duplicate output (virtual) sensor ids requested through bsec_update_subscription() */
|
||||
BSEC_E_SU_INVALIDSAMPLERATE = -14, /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() does not fall within the global minimum and maximum sampling rates */
|
||||
BSEC_E_SU_GATECOUNTEXCEEDSARRAY = -15, /*!< Not enough memory allocated to hold returned input (physical) sensor data from bsec_update_subscription(), i.e., n_required_sensor_settings < #BSEC_MAX_PHYSICAL_SENSOR */
|
||||
BSEC_E_SU_SAMPLINTVLINTEGERMULT = -16, /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() is not correct */
|
||||
BSEC_E_SU_MULTGASSAMPLINTVL = -17, /*!< The sample_rate of the requested output (virtual), which requires the gas sensor, is not equal to the sample_rate that the gas sensor is being operated */
|
||||
BSEC_E_SU_HIGHHEATERONDURATION = -18, /*!< The duration of one measurement is longer than the requested sampling interval */
|
||||
BSEC_W_SU_UNKNOWNOUTPUTGATE = 10, /*!< Output (virtual) sensor id passed to bsec_update_subscription() is not in the valid range; e.g., n_requested_virtual_sensors > actual number of output (virtual) sensors requested */
|
||||
BSEC_W_SU_MODINNOULP = 11, /*!< ULP plus can not be requested in non-ulp mode */ /*MOD_ONLY*/
|
||||
BSEC_I_SU_SUBSCRIBEDOUTPUTGATES = 12, /*!< No output (virtual) sensor data were requested via bsec_update_subscription() */
|
||||
BSEC_E_PARSE_SECTIONEXCEEDSWORKBUFFER = -32, /*!< n_work_buffer_size passed to bsec_set_[configuration/state]() not sufficient */
|
||||
BSEC_E_CONFIG_FAIL = -33, /*!< Configuration failed */
|
||||
BSEC_E_CONFIG_VERSIONMISMATCH = -34, /*!< Version encoded in serialized_[settings/state] passed to bsec_set_[configuration/state]() does not match with current version */
|
||||
BSEC_E_CONFIG_FEATUREMISMATCH = -35, /*!< Enabled features encoded in serialized_[settings/state] passed to bsec_set_[configuration/state]() does not match with current library implementation */
|
||||
BSEC_E_CONFIG_CRCMISMATCH = -36, /*!< serialized_[settings/state] passed to bsec_set_[configuration/state]() is corrupted */
|
||||
BSEC_E_CONFIG_EMPTY = -37, /*!< n_serialized_[settings/state] passed to bsec_set_[configuration/state]() is to short to be valid */
|
||||
BSEC_E_CONFIG_INSUFFICIENTWORKBUFFER = -38, /*!< Provided work_buffer is not large enough to hold the desired string */
|
||||
BSEC_E_CONFIG_INVALIDSTRINGSIZE = -40, /*!< String size encoded in configuration/state strings passed to bsec_set_[configuration/state]() does not match with the actual string size n_serialized_[settings/state] passed to these functions */
|
||||
BSEC_E_CONFIG_INSUFFICIENTBUFFER = -41, /*!< String buffer insufficient to hold serialized data from BSEC library */
|
||||
BSEC_E_SET_INVALIDCHANNELIDENTIFIER = -100, /*!< Internal error code, size of work buffer in setConfig must be set to BSEC_MAX_WORKBUFFER_SIZE */
|
||||
BSEC_E_SET_INVALIDLENGTH = -104, /*!< Internal error code */
|
||||
BSEC_W_SC_CALL_TIMING_VIOLATION = 100, /*!< Difference between actual and defined sampling intervals of bsec_sensor_control() greater than allowed */
|
||||
BSEC_W_SC_MODEXCEEDULPTIMELIMIT = 101, /*!< ULP plus is not allowed because an ULP measurement just took or will take place */ /*MOD_ONLY*/
|
||||
BSEC_W_SC_MODINSUFFICIENTWAITTIME = 102 /*!< ULP plus is not allowed because not sufficient time passed since last ULP plus */ /*MOD_ONLY*/
|
||||
} bsec_library_return_t;
|
||||
|
||||
/*!
|
||||
* @brief Structure containing the version information
|
||||
*
|
||||
* Please note that configuration and state strings are coded to a specific version and will not be accepted by other
|
||||
* versions of BSEC.
|
||||
*
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t major; /**< @brief Major version */
|
||||
uint8_t minor; /**< @brief Minor version */
|
||||
uint8_t major_bugfix; /**< @brief Major bug fix version */
|
||||
uint8_t minor_bugfix; /**< @brief Minor bug fix version */
|
||||
} bsec_version_t;
|
||||
|
||||
/*!
|
||||
* @brief Structure describing an input sample to the library
|
||||
*
|
||||
* Each input sample is provided to BSEC as an element in a struct array of this type. Timestamps must be provided
|
||||
* in nanosecond resolution. Moreover, duplicate timestamps for subsequent samples are not allowed and will results in
|
||||
* an error code being returned from bsec_do_steps().
|
||||
*
|
||||
* The meaning unit of the signal field are determined by the bsec_input_t::sensor_id field content. Possible
|
||||
* bsec_input_t::sensor_id values and and their meaning are described in ::bsec_physical_sensor_t.
|
||||
*
|
||||
* @sa bsec_physical_sensor_t
|
||||
*
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
/**
|
||||
* @brief Time stamp in nanosecond resolution [ns]
|
||||
*
|
||||
* Timestamps must be provided as non-repeating and increasing values. They can have their 0-points at system start or
|
||||
* at a defined wall-clock time (e.g., 01-Jan-1970 00:00:00)
|
||||
*/
|
||||
int64_t time_stamp;
|
||||
float signal; /*!< @brief Signal sample in the unit defined for the respective sensor_id @sa bsec_physical_sensor_t */
|
||||
uint8_t signal_dimensions; /*!< @brief Signal dimensions (reserved for future use, shall be set to 1) */
|
||||
uint8_t sensor_id; /*!< @brief Identifier of physical sensor @sa bsec_physical_sensor_t */
|
||||
} bsec_input_t;
|
||||
|
||||
/*!
|
||||
* @brief Structure describing an output sample of the library
|
||||
*
|
||||
* Each output sample is returned from BSEC by populating the element of a struct array of this type. The contents of
|
||||
* the signal field is defined by the supplied bsec_output_t::sensor_id. Possible output
|
||||
* bsec_output_t::sensor_id values are defined in ::bsec_virtual_sensor_t.
|
||||
*
|
||||
* @sa bsec_virtual_sensor_t
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
int64_t time_stamp; /*!< @brief Time stamp in nanosecond resolution as provided as input [ns] */
|
||||
float signal; /*!< @brief Signal sample in the unit defined for the respective bsec_output_t::sensor_id @sa bsec_virtual_sensor_t */
|
||||
uint8_t signal_dimensions; /*!< @brief Signal dimensions (reserved for future use, shall be set to 1) */
|
||||
uint8_t sensor_id; /*!< @brief Identifier of virtual sensor @sa bsec_virtual_sensor_t */
|
||||
|
||||
/**
|
||||
* @brief Accuracy status 0-3
|
||||
*
|
||||
* Some virtual sensors provide a value in the accuracy field. If this is the case, the meaning of the field is as
|
||||
* follows:
|
||||
*
|
||||
* | Name | Value | Accuracy description |
|
||||
* |----------------------------|-------|-------------------------------------------------------------|
|
||||
* | UNRELIABLE | 0 | Sensor data is unreliable, the sensor must be calibrated |
|
||||
* | LOW_ACCURACY | 1 | Low accuracy, sensor should be calibrated |
|
||||
* | MEDIUM_ACCURACY | 2 | Medium accuracy, sensor calibration may improve performance |
|
||||
* | HIGH_ACCURACY | 3 | High accuracy |
|
||||
*
|
||||
* For example:
|
||||
*
|
||||
* - Ambient temperature accuracy is derived from change in the temperature in 1 minute.
|
||||
*
|
||||
* | Virtual sensor | Value | Accuracy description |
|
||||
* |--------------------- |-------|------------------------------------------------------------------------------|
|
||||
* | Ambient temperature | 0 | The difference in ambient temperature is greater than 4 degree in one minute |
|
||||
* | | 1 | The difference in ambient temperature is less than 4 degree in one minute |
|
||||
* | | 2 | The difference in ambient temperature is less than 3 degree in one minute |
|
||||
* | | 3 | The difference in ambient temperature is less than 2 degree in one minute |
|
||||
*
|
||||
* - IAQ accuracy indicator will notify the user when she/he should initiate a calibration process. Calibration is
|
||||
* performed automatically in the background if the sensor is exposed to clean and polluted air for approximately
|
||||
* 30 minutes each.
|
||||
*
|
||||
* | Virtual sensor | Value | Accuracy description |
|
||||
* |----------------------------|-------|-----------------------------------------------------------------|
|
||||
* | IAQ | 0 | The sensor is not yet stabilized or in a run-in status |
|
||||
* | | 1 | Calibration required |
|
||||
* | | 2 | Calibration on-going |
|
||||
* | | 3 | Calibration is done, now IAQ estimate achieves best performance |
|
||||
*/
|
||||
uint8_t accuracy;
|
||||
} bsec_output_t;
|
||||
|
||||
/*!
|
||||
* @brief Structure describing sample rate of physical/virtual sensors
|
||||
*
|
||||
* This structure is used together with bsec_update_subscription() to enable BSEC outputs and to retrieve information
|
||||
* about the sample rates used for BSEC inputs.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
/**
|
||||
* @brief Sample rate of the virtual or physical sensor in Hertz [Hz]
|
||||
*
|
||||
* Only supported sample rates are allowed.
|
||||
*/
|
||||
float sample_rate;
|
||||
|
||||
/**
|
||||
* @brief Identifier of the virtual or physical sensor
|
||||
*
|
||||
* The meaning of this field changes depending on whether the structs are as the requested_virtual_sensors argument
|
||||
* to bsec_update_subscription() or as the required_sensor_settings argument.
|
||||
*
|
||||
* | bsec_update_subscription() argument | sensor_id field interpretation |
|
||||
* |-------------------------------------|--------------------------------|
|
||||
* | requested_virtual_sensors | ::bsec_virtual_sensor_t |
|
||||
* | required_sensor_settings | ::bsec_physical_sensor_t |
|
||||
*
|
||||
* @sa bsec_physical_sensor_t
|
||||
* @sa bsec_virtual_sensor_t
|
||||
*/
|
||||
uint8_t sensor_id;
|
||||
} bsec_sensor_configuration_t;
|
||||
|
||||
/*!
|
||||
* @brief Structure returned by bsec_sensor_control() to configure BMExxx sensor
|
||||
*
|
||||
* This structure contains settings that must be used to configure the BMExxx to perform a forced-mode measurement.
|
||||
* A measurement should only be executed if bsec_bme_settings_t::trigger_measurement is 1. If so, the oversampling
|
||||
* settings for temperature, humidity, and pressure should be set to the provided settings provided in
|
||||
* bsec_bme_settings_t::temperature_oversampling, bsec_bme_settings_t::humidity_oversampling, and
|
||||
* bsec_bme_settings_t::pressure_oversampling, respectively.
|
||||
*
|
||||
* In case of bsec_bme_settings_t::run_gas = 1, the gas sensor must be enabled with the provided
|
||||
* bsec_bme_settings_t::heater_temperature and bsec_bme_settings_t::heating_duration settings.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
int64_t next_call; /*!< @brief Time stamp of the next call of the sensor_control*/
|
||||
uint32_t process_data; /*!< @brief Bit field describing which data is to be passed to bsec_do_steps() @sa BSEC_PROCESS_* */
|
||||
uint16_t heater_temperature; /*!< @brief Heating temperature [degrees Celsius] */
|
||||
uint16_t heating_duration; /*!< @brief Heating duration [ms] */
|
||||
uint8_t run_gas; /*!< @brief Enable gas measurements [0/1] */
|
||||
uint8_t pressure_oversampling; /*!< @brief Pressure oversampling settings [0-5] */
|
||||
uint8_t temperature_oversampling; /*!< @brief Temperature oversampling settings [0-5] */
|
||||
uint8_t humidity_oversampling; /*!< @brief Humidity oversampling settings [0-5] */
|
||||
uint8_t trigger_measurement; /*!< @brief Trigger a forced measurement with these settings now [0/1] */
|
||||
} bsec_bme_settings_t;
|
||||
|
||||
/* internal defines and backward compatibility */
|
||||
#define BSEC_STRUCT_NAME Bsec /*!< Internal struct name */
|
||||
|
||||
/*@}*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -1,564 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2015, 2016, 2017 Robert Bosch. All Rights Reserved.
|
||||
*
|
||||
* Disclaimer
|
||||
*
|
||||
* Common:
|
||||
* Bosch Sensortec products are developed for the consumer goods industry. They may only be used
|
||||
* within the parameters of the respective valid product data sheet. Bosch Sensortec products are
|
||||
* provided with the express understanding that there is no warranty of fitness for a particular purpose.
|
||||
* They are not fit for use in life-sustaining, safety or security sensitive systems or any system or device
|
||||
* that may lead to bodily harm or property damage if the system or device malfunctions. In addition,
|
||||
* Bosch Sensortec products are not fit for use in products which interact with motor vehicle systems.
|
||||
* The resale and/or use of products are at the purchasers own risk and his own responsibility. The
|
||||
* examination of fitness for the intended use is the sole responsibility of the Purchaser.
|
||||
*
|
||||
* The purchaser shall indemnify Bosch Sensortec from all third party claims, including any claims for
|
||||
* incidental, or consequential damages, arising from any product use not covered by the parameters of
|
||||
* the respective valid product data sheet or not approved by Bosch Sensortec and reimburse Bosch
|
||||
* Sensortec for all costs in connection with such claims.
|
||||
*
|
||||
* The purchaser must monitor the market for the purchased products, particularly with regard to
|
||||
* product safety and inform Bosch Sensortec without delay of all security relevant incidents.
|
||||
*
|
||||
* Engineering Samples are marked with an asterisk (*) or (e). Samples may vary from the valid
|
||||
* technical specifications of the product series. They are therefore not intended or fit for resale to third
|
||||
* parties or for use in end products. Their sole purpose is internal client testing. The testing of an
|
||||
* engineering sample may in no way replace the testing of a product series. Bosch Sensortec
|
||||
* assumes no liability for the use of engineering samples. By accepting the engineering samples, the
|
||||
* Purchaser agrees to indemnify Bosch Sensortec from all claims arising from the use of engineering
|
||||
* samples.
|
||||
*
|
||||
* Special:
|
||||
* This software module (hereinafter called "Software") and any information on application-sheets
|
||||
* (hereinafter called "Information") is provided free of charge for the sole purpose to support your
|
||||
* application work. The Software and Information is subject to the following terms and conditions:
|
||||
*
|
||||
* The Software is specifically designed for the exclusive use for Bosch Sensortec products by
|
||||
* personnel who have special experience and training. Do not use this Software if you do not have the
|
||||
* proper experience or training.
|
||||
*
|
||||
* This Software package is provided `` as is `` and without any expressed or implied warranties,
|
||||
* including without limitation, the implied warranties of merchantability and fitness for a particular
|
||||
* purpose.
|
||||
*
|
||||
* Bosch Sensortec and their representatives and agents deny any liability for the functional impairment
|
||||
* of this Software in terms of fitness, performance and safety. Bosch Sensortec and their
|
||||
* representatives and agents shall not be liable for any direct or indirect damages or injury, except as
|
||||
* otherwise stipulated in mandatory applicable law.
|
||||
*
|
||||
* The Information provided is believed to be accurate and reliable. Bosch Sensortec assumes no
|
||||
* responsibility for the consequences of use of such Information nor for any infringement of patents or
|
||||
* other rights of third parties which may result from its use. No license is granted by implication or
|
||||
* otherwise under any patent or patent rights of Bosch. Specifications mentioned in the Information are
|
||||
* subject to change without notice.
|
||||
*
|
||||
* It is not allowed to deliver the source code of the Software to any third party without permission of
|
||||
* Bosch Sensortec.
|
||||
*
|
||||
*/
|
||||
/*!
|
||||
*
|
||||
* @file bsec_interface.h
|
||||
*
|
||||
* @brief
|
||||
* Contains the API for BSEC
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#ifndef __BSEC_INTERFACE_H__
|
||||
#define __BSEC_INTERFACE_H__
|
||||
|
||||
#include "bsec_datatypes.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/*! @addtogroup bsec_interface BSEC C Interface
|
||||
* @brief Interfaces of BSEC signal processing library
|
||||
*
|
||||
* ### Interface usage
|
||||
*
|
||||
* The following provides a short overview on the typical operation sequence for BSEC.
|
||||
*
|
||||
* - Initialization of the library
|
||||
*
|
||||
* | Steps | Function |
|
||||
* |---------------------------------------------------------------------|--------------------------|
|
||||
* | Initialization of library | bsec_init() |
|
||||
* | Update configuration settings (optional) | bsec_set_configuration() |
|
||||
* | Restore the state of the library (optional) | bsec_set_state() |
|
||||
*
|
||||
*
|
||||
* - The following function is called to enable output signals and define their sampling rate / operation mode.
|
||||
*
|
||||
* | Steps | Function |
|
||||
* |---------------------------------------------|----------------------------|
|
||||
* | Enable library outputs with specified mode | bsec_update_subscription() |
|
||||
*
|
||||
*
|
||||
* - This table describes the main processing loop.
|
||||
*
|
||||
* | Steps | Function |
|
||||
* |-------------------------------------------|----------------------------------|
|
||||
* | Retrieve sensor settings to be used | bsec_sensor_control() |
|
||||
* | Configure sensor and trigger measurement | See BME680 API and example codes |
|
||||
* | Read results from sensor | See BME680 API and example codes |
|
||||
* | Perform signal processing | bsec_do_steps() |
|
||||
*
|
||||
*
|
||||
* - Before shutting down the system, the current state of BSEC can be retrieved and can then be used during
|
||||
* re-initialization to continue processing.
|
||||
*
|
||||
* | Steps | Function |
|
||||
* |----------------------------------------|-------------------|
|
||||
* | To retrieve the current library state | bsec_get_state() |
|
||||
*
|
||||
*
|
||||
*
|
||||
* ### Configuration and state
|
||||
*
|
||||
* Values of variables belonging to a BSEC instance are divided into two groups:
|
||||
* - Values **not updated by processing** of signals belong to the **configuration group**. If available, BSEC can be
|
||||
* configured before use with a customer specific configuration string.
|
||||
* - Values **updated during processing** are member of the **state group**. Saving and restoring of the state of BSEC
|
||||
* is necessary to maintain previously estimated sensor models and baseline information which is important for best
|
||||
* performance of the gas sensor outputs.
|
||||
*
|
||||
* @note BSEC library consists of adaptive algorithms which models the gas sensor which improves its performance over
|
||||
* the time. These will be lost if library is initialized due to system reset. In order to avoid this situation
|
||||
* library state shall be stored in non volatile memory so that it can be loaded after system reset.
|
||||
*
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Return the version information of BSEC library
|
||||
*
|
||||
* @param [out] bsec_version_p pointer to struct which is to be populated with the version information
|
||||
*
|
||||
* @return Zero if successful, otherwise an error code
|
||||
*
|
||||
* See also: bsec_version_t
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
bsec_version_t version;
|
||||
bsec_get_version(&version);
|
||||
printf("BSEC version: %d.%d.%d.%d",version.major, version.minor, version.major_bugfix, version.minor_bugfix);
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_get_version(bsec_version_t * bsec_version_p);
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Initialize the library
|
||||
*
|
||||
* Initialization and reset of BSEC is performed by calling bsec_init(). Calling this function sets up the relation
|
||||
* among all internal modules, initializes run-time dependent library states and resets the configuration and state
|
||||
* of all BSEC signal processing modules to defaults.
|
||||
*
|
||||
* Before any further use, the library must be initialized. This ensure that all memory and states are in defined
|
||||
* conditions prior to processing any data.
|
||||
*
|
||||
* @return Zero if successful, otherwise an error code
|
||||
*
|
||||
\code{.c}
|
||||
|
||||
// Initialize BSEC library before further use
|
||||
bsec_init();
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_init(void);
|
||||
|
||||
/*!
|
||||
* @brief Subscribe to library virtual sensors outputs
|
||||
*
|
||||
* Use bsec_update_subscription() to instruct BSEC which of the processed output signals are requested at which sample rates.
|
||||
* See ::bsec_virtual_sensor_t for available library outputs.
|
||||
*
|
||||
* Based on the requested virtual sensors outputs, BSEC will provide information about the required physical sensor input signals
|
||||
* (see ::bsec_physical_sensor_t) with corresponding sample rates. This information is purely informational as bsec_sensor_control()
|
||||
* will ensure the sensor is operated in the required manner. To disable a virtual sensor, set the sample rate to BSEC_SAMPLE_RATE_DISABLED.
|
||||
*
|
||||
* The subscription update using bsec_update_subscription() is apart from the signal processing one of the the most
|
||||
* important functions. It allows to enable the desired library outputs. The function determines which physical input
|
||||
* sensor signals are required at which sample rate to produce the virtual output sensor signals requested by the user.
|
||||
* When this function returns with success, the requested outputs are called subscribed. A very important feature is the
|
||||
* retaining of already subscribed outputs. Further outputs can be requested or disabled both individually and
|
||||
* group-wise in addition to already subscribed outputs without changing them unless a change of already subscribed
|
||||
* outputs is requested.
|
||||
*
|
||||
* @note The state of the library concerning the subscribed outputs cannot be retained among reboots.
|
||||
*
|
||||
* The interface of bsec_update_subscription() requires the usage of arrays of sensor configuration structures.
|
||||
* Such a structure has the fields sensor identifier and sample rate. These fields have the properties:
|
||||
* - Output signals of virtual sensors must be requested using unique identifiers (Member of ::bsec_virtual_sensor_t)
|
||||
* - Different sets of identifiers are available for inputs of physical sensors and outputs of virtual sensors
|
||||
* - Identifiers are unique values defined by the library, not from external
|
||||
* - Sample rates must be provided as value of
|
||||
* - An allowed sample rate for continuously sampled signals
|
||||
* - 65535.0f (BSEC_SAMPLE_RATE_DISABLED) to turn off outputs and identify disabled inputs
|
||||
*
|
||||
* @note The same sensor identifiers are also used within the functions bsec_do_steps().
|
||||
*
|
||||
* The usage principles of bsec_update_subscription() are:
|
||||
* - Differential updates (i.e., only asking for outputs that the user would like to change) is supported.
|
||||
* - Invalid requests of outputs are ignored. Also if one of the requested outputs is unavailable, all the requests
|
||||
* are ignored. At the same time, a warning is returned.
|
||||
* - To disable BSEC, all outputs shall be turned off. Only enabled (subscribed) outputs have to be disabled while
|
||||
* already disabled outputs do not have to be disabled explicitly.
|
||||
*
|
||||
* @param[in] requested_virtual_sensors Pointer to array of requested virtual sensor (output) configurations for the library
|
||||
* @param[in] n_requested_virtual_sensors Number of virtual sensor structs pointed by requested_virtual_sensors
|
||||
* @param[out] required_sensor_settings Pointer to array of required physical sensor configurations for the library
|
||||
* @param[in,out] n_required_sensor_settings [in] Size of allocated required_sensor_settings array, [out] number of sensor configurations returned
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
* @sa bsec_sensor_configuration_t
|
||||
* @sa bsec_physical_sensor_t
|
||||
* @sa bsec_virtual_sensor_t
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
|
||||
// Change 3 virtual sensors (switch IAQ and raw temperature -> on / pressure -> off)
|
||||
bsec_sensor_configuration_t requested_virtual_sensors[3];
|
||||
uint8_t n_requested_virtual_sensors = 3;
|
||||
|
||||
requested_virtual_sensors[0].sensor_id = BSEC_OUTPUT_IAQ;
|
||||
requested_virtual_sensors[0].sample_rate = BSEC_SAMPLE_RATE_ULP;
|
||||
requested_virtual_sensors[1].sensor_id = BSEC_OUTPUT_RAW_TEMPERATURE;
|
||||
requested_virtual_sensors[1].sample_rate = BSEC_SAMPLE_RATE_ULP;
|
||||
requested_virtual_sensors[2].sensor_id = BSEC_OUTPUT_RAW_PRESSURE;
|
||||
requested_virtual_sensors[2].sample_rate = BSEC_SAMPLE_RATE_DISABLED;
|
||||
|
||||
// Allocate a struct for the returned physical sensor settings
|
||||
bsec_sensor_configuration_t required_sensor_settings[BSEC_MAX_PHYSICAL_SENSOR];
|
||||
uint8_t n_required_sensor_settings = BSEC_MAX_PHYSICAL_SENSOR;
|
||||
|
||||
// Call bsec_update_subscription() to enable/disable the requested virtual sensors
|
||||
bsec_update_subscription(requested_virtual_sensors, n_requested_virtual_sensors, required_sensor_settings, &n_required_sensor_settings);
|
||||
\endcode
|
||||
*
|
||||
*/
|
||||
bsec_library_return_t bsec_update_subscription(const bsec_sensor_configuration_t * const requested_virtual_sensors,
|
||||
const uint8_t n_requested_virtual_sensors, bsec_sensor_configuration_t * required_sensor_settings,
|
||||
uint8_t * n_required_sensor_settings);
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Main signal processing function of BSEC
|
||||
*
|
||||
*
|
||||
* Processing of the input signals and returning of output samples is performed by bsec_do_steps().
|
||||
* - The samples of all library inputs must be passed with unique identifiers representing the input signals from
|
||||
* physical sensors where the order of these inputs can be chosen arbitrary. However, all input have to be provided
|
||||
* within the same time period as they are read. A sequential provision to the library might result in undefined
|
||||
* behavior.
|
||||
* - The samples of all library outputs are returned with unique identifiers corresponding to the output signals of
|
||||
* virtual sensors where the order of the returned outputs may be arbitrary.
|
||||
* - The samples of all input as well as output signals of physical as well as virtual sensors use the same
|
||||
* representation in memory with the following fields:
|
||||
* - Sensor identifier:
|
||||
* - For inputs: required to identify the input signal from a physical sensor
|
||||
* - For output: overwritten by bsec_do_steps() to identify the returned signal from a virtual sensor
|
||||
* - Time stamp of the sample
|
||||
*
|
||||
* Calling bsec_do_steps() requires the samples of the input signals to be provided along with their time stamp when
|
||||
* they are recorded and only when they are acquired. Repetition of samples with the same time stamp are ignored and
|
||||
* result in a warning. Repetition of values of samples which are not acquired anew by a sensor result in deviations
|
||||
* of the computed output signals. Concerning the returned output samples, an important feature is, that a value is
|
||||
* returned for an output only when a new occurrence has been computed. A sample of an output signal is returned only
|
||||
* once.
|
||||
*
|
||||
*
|
||||
* @param[in] inputs Array of input data samples. Each array element represents a sample of a different physical sensor.
|
||||
* @param[in] n_inputs Number of passed input data structs.
|
||||
* @param[out] outputs Array of output data samples. Each array element represents a sample of a different virtual sensor.
|
||||
* @param[in,out] n_outputs [in] Number of allocated output structs, [out] number of outputs returned
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
|
||||
\code{.c}
|
||||
// Example //
|
||||
|
||||
// Allocate input and output memory
|
||||
bsec_input_t input[3];
|
||||
uint8_t n_input = 3;
|
||||
bsec_output_t output[2];
|
||||
uint8_t n_output=2;
|
||||
|
||||
bsec_library_return_t status;
|
||||
|
||||
// Populate the input structs, assuming the we have timestamp (ts),
|
||||
// gas sensor resistance (R), temperature (T), and humidity (rH) available
|
||||
// as input variables
|
||||
input[0].sensor_id = BSEC_INPUT_GASRESISTOR;
|
||||
input[0].signal = R;
|
||||
input[0].time_stamp= ts;
|
||||
input[1].sensor_id = BSEC_INPUT_TEMPERATURE;
|
||||
input[1].signal = T;
|
||||
input[1].time_stamp= ts;
|
||||
input[2].sensor_id = BSEC_INPUT_HUMIDITY;
|
||||
input[2].signal = rH;
|
||||
input[2].time_stamp= ts;
|
||||
|
||||
|
||||
// Invoke main processing BSEC function
|
||||
status = bsec_do_steps( input, n_input, output, &n_output );
|
||||
|
||||
// Iterate through the BSEC output data, if the call succeeded
|
||||
if(status == BSEC_OK)
|
||||
{
|
||||
for(int i = 0; i < n_output; i++)
|
||||
{
|
||||
switch(output[i].sensor_id)
|
||||
{
|
||||
case BSEC_OUTPUT_IAQ:
|
||||
// Retrieve the IAQ results from output[i].signal
|
||||
// and do something with the data
|
||||
break;
|
||||
case BSEC_OUTPUT_AMBIENT_TEMPERATURE:
|
||||
// Retrieve the ambient temperature results from output[i].signal
|
||||
// and do something with the data
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_do_steps(const bsec_input_t * const inputs, const uint8_t n_inputs, bsec_output_t * outputs, uint8_t * n_outputs);
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Reset a particular virtual sensor output
|
||||
*
|
||||
* This function allows specific virtual sensor outputs to be reset. The meaning of "reset" depends on the specific
|
||||
* output. In case of the IAQ output, reset means zeroing the output to the current ambient conditions.
|
||||
*
|
||||
* @param[in] sensor_id Virtual sensor to be reset
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
bsec_reset_output(BSEC_OUTPUT_IAQ);
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_reset_output(uint8_t sensor_id);
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Update algorithm configuration parameters
|
||||
*
|
||||
* BSEC uses a default configuration for the modules and common settings. The initial configuration can be customized
|
||||
* by bsec_set_configuration(). This is an optional step.
|
||||
*
|
||||
* @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose
|
||||
* the serialization and apply it to the library and its modules. Please use #BSEC_MAX_PROPERTY_BLOB_SIZE for allotting
|
||||
* the required size.
|
||||
*
|
||||
* @param[in] serialized_settings Settings serialized to a binary blob
|
||||
* @param[in] n_serialized_settings Size of the settings blob
|
||||
* @param[in,out] work_buffer Work buffer used to parse the blob
|
||||
* @param[in] n_work_buffer_size Length of the work buffer available for parsing the blob
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
|
||||
// Allocate variables
|
||||
uint8_t serialized_settings[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
uint32_t n_serialized_settings_max = BSEC_MAX_PROPERTY_BLOB_SIZE;
|
||||
uint8_t work_buffer[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
uint32_t n_work_buffer = BSEC_MAX_PROPERTY_BLOB_SIZE;
|
||||
|
||||
// Here we will load a provided config string into serialized_settings
|
||||
|
||||
// Apply the configuration
|
||||
bsec_set_configuration(serialized_settings, n_serialized_settings_max, work_buffer, n_work_buffer);
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_set_configuration(const uint8_t * const serialized_settings,
|
||||
const uint32_t n_serialized_settings, uint8_t * work_buffer,
|
||||
const uint32_t n_work_buffer_size);
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Restore the internal state of the library
|
||||
*
|
||||
* BSEC uses a default state for all signal processing modules and the BSEC module. To ensure optimal performance,
|
||||
* especially of the gas sensor functionality, it is recommended to retrieve the state using bsec_get_state()
|
||||
* before unloading the library, storing it in some form of non-volatile memory, and setting it using bsec_set_state()
|
||||
* before resuming further operation of the library.
|
||||
*
|
||||
* @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose the
|
||||
* serialization and apply it to the library and its modules. Please use #BSEC_MAX_PROPERTY_BLOB_SIZE for allotting the
|
||||
* required size.
|
||||
*
|
||||
* @param[in] serialized_state States serialized to a binary blob
|
||||
* @param[in] n_serialized_state Size of the state blob
|
||||
* @param[in,out] work_buffer Work buffer used to parse the blob
|
||||
* @param[in] n_work_buffer_size Length of the work buffer available for parsing the blob
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
|
||||
// Allocate variables
|
||||
uint8_t serialized_state[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
uint32_t n_serialized_state = BSEC_MAX_PROPERTY_BLOB_SIZE;
|
||||
uint8_t work_buffer_state[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
uint32_t n_work_buffer_size = BSEC_MAX_PROPERTY_BLOB_SIZE;
|
||||
|
||||
// Here we will load a state string from a previous use of BSEC
|
||||
|
||||
// Apply the previous state to the current BSEC session
|
||||
bsec_set_state(serialized_state, n_serialized_state, work_buffer_state, n_work_buffer_size);
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_set_state(const uint8_t * const serialized_state, const uint32_t n_serialized_state,
|
||||
uint8_t * work_buffer, const uint32_t n_work_buffer_size);
|
||||
|
||||
|
||||
/*!
|
||||
* @brief Retrieve the current library configuration
|
||||
*
|
||||
* BSEC allows to retrieve the current configuration using bsec_get_configuration(). Returns a binary blob encoding
|
||||
* the current configuration parameters of the library in a format compatible with bsec_set_configuration().
|
||||
*
|
||||
* @note The function bsec_get_configuration() is required to be used for debugging purposes only.
|
||||
* @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose the
|
||||
* serialization and apply it to the library and its modules. Please use #BSEC_MAX_PROPERTY_BLOB_SIZE for allotting the
|
||||
* required size.
|
||||
*
|
||||
*
|
||||
* @param[in] config_id Identifier for a specific set of configuration settings to be returned;
|
||||
* shall be zero to retrieve all configuration settings.
|
||||
* @param[out] serialized_settings Buffer to hold the serialized config blob
|
||||
* @param[in] n_serialized_settings_max Maximum available size for the serialized settings
|
||||
* @param[in,out] work_buffer Work buffer used to parse the binary blob
|
||||
* @param[in] n_work_buffer Length of the work buffer available for parsing the blob
|
||||
* @param[out] n_serialized_settings Actual size of the returned serialized configuration blob
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
|
||||
// Allocate variables
|
||||
uint8_t serialized_settings[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
uint32_t n_serialized_settings_max = BSEC_MAX_PROPERTY_BLOB_SIZE;
|
||||
uint8_t work_buffer[BSEC_MAX_PROPERTY_BLOB_SIZE];
|
||||
uint32_t n_work_buffer = BSEC_MAX_PROPERTY_BLOB_SIZE;
|
||||
uint32_t n_serialized_settings = 0;
|
||||
|
||||
// Configuration of BSEC algorithm is stored in 'serialized_settings'
|
||||
bsec_get_configuration(0, serialized_settings, n_serialized_settings_max, work_buffer, n_work_buffer, &n_serialized_settings);
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_get_configuration(const uint8_t config_id, uint8_t * serialized_settings, const uint32_t n_serialized_settings_max,
|
||||
uint8_t * work_buffer, const uint32_t n_work_buffer, uint32_t * n_serialized_settings);
|
||||
|
||||
|
||||
/*!
|
||||
*@brief Retrieve the current internal library state
|
||||
*
|
||||
* BSEC allows to retrieve the current states of all signal processing modules and the BSEC module using
|
||||
* bsec_get_state(). This allows a restart of the processing after a reboot of the system by calling bsec_set_state().
|
||||
*
|
||||
* @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose the
|
||||
* serialization and apply it to the library and its modules. Please use #BSEC_MAX_STATE_BLOB_SIZE for allotting the
|
||||
* required size.
|
||||
*
|
||||
*
|
||||
* @param[in] state_set_id Identifier for a specific set of states to be returned; shall be
|
||||
* zero to retrieve all states.
|
||||
* @param[out] serialized_state Buffer to hold the serialized config blob
|
||||
* @param[in] n_serialized_state_max Maximum available size for the serialized states
|
||||
* @param[in,out] work_buffer Work buffer used to parse the blob
|
||||
* @param[in] n_work_buffer Length of the work buffer available for parsing the blob
|
||||
* @param[out] n_serialized_state Actual size of the returned serialized blob
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*
|
||||
\code{.c}
|
||||
// Example //
|
||||
|
||||
// Allocate variables
|
||||
uint8_t serialized_state[BSEC_MAX_STATE_BLOB_SIZE];
|
||||
uint32_t n_serialized_state_max = BSEC_MAX_STATE_BLOB_SIZE;
|
||||
uint32_t n_serialized_state = BSEC_MAX_STATE_BLOB_SIZE;
|
||||
uint8_t work_buffer_state[BSEC_MAX_STATE_BLOB_SIZE];
|
||||
uint32_t n_work_buffer_size = BSEC_MAX_STATE_BLOB_SIZE;
|
||||
|
||||
// Algorithm state is stored in 'serialized_state'
|
||||
bsec_get_state(0, serialized_state, n_serialized_state_max, work_buffer_state, n_work_buffer_size, &n_serialized_state);
|
||||
|
||||
\endcode
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_get_state(const uint8_t state_set_id, uint8_t * serialized_state,
|
||||
const uint32_t n_serialized_state_max, uint8_t * work_buffer, const uint32_t n_work_buffer,
|
||||
uint32_t * n_serialized_state);
|
||||
|
||||
/*!
|
||||
* @brief Retrieve BMExxx sensor instructions
|
||||
*
|
||||
* The bsec_sensor_control() interface is a key feature of BSEC, as it allows an easy way for the signal processing
|
||||
* library to control the operation of the BME sensor. This is important since gas sensor behaviour is mainly
|
||||
* determined by how the integrated heater is configured. To ensure an easy integration of BSEC into any system,
|
||||
* bsec_sensor_control() will provide the caller with information about the current sensor configuration that is
|
||||
* necessary to fulfill the input requirements derived from the current outputs requested via
|
||||
* bsec_update_subscription().
|
||||
*
|
||||
* In practice the use of this function shall be as follows:
|
||||
* - Call bsec_sensor_control() which returns a bsec_bme_settings_t struct.
|
||||
* - Based on the information contained in this struct, the sensor is configured and a forced-mode measurement is
|
||||
* triggered if requested by bsec_sensor_control().
|
||||
* - Once this forced-mode measurement is complete, the signals specified in this struct shall be passed to
|
||||
* bsec_do_steps() to perform the signal processing.
|
||||
* - After processing, the process should sleep until the bsec_bme_settings_t::next_call timestamp is reached.
|
||||
*
|
||||
*
|
||||
* @param [in] time_stamp Current timestamp in [ns]
|
||||
* @param[out] sensor_settings Settings to be passed to API to operate sensor at this time instance
|
||||
*
|
||||
* @return Zero when successful, otherwise an error code
|
||||
*/
|
||||
|
||||
bsec_library_return_t bsec_sensor_control(const int64_t time_stamp, bsec_bme_settings_t *sensor_settings);
|
||||
|
||||
/*@}*/ //BSEC Interface
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __BSEC_INTERFACE_H__ */
|
||||
@ -31,6 +31,7 @@ halfile = generic.h
|
||||
;halfile = octopus32.h
|
||||
;halfile = tinypico.h
|
||||
;halfile = tinypicomatrix.h
|
||||
;halfile = m5stack.h
|
||||
|
||||
[platformio]
|
||||
; upload firmware to board with usb cable
|
||||
@ -43,7 +44,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
|
||||
|
||||
[common]
|
||||
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
|
||||
release_version = 1.9.85
|
||||
release_version = 1.9.89
|
||||
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
|
||||
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
|
||||
debug_level = 3
|
||||
@ -56,13 +57,13 @@ monitor_speed = 115200
|
||||
upload_speed = 115200
|
||||
lib_deps_lora =
|
||||
;MCCI LoRaWAN LMIC library@>=3.1.0 ; MCCI LMIC by Terrill Moore
|
||||
https://github.com/mcci-catena/arduino-lmic.git#3ca90f3
|
||||
https://github.com/mcci-catena/arduino-lmic.git#98a1b35
|
||||
lib_deps_display =
|
||||
ss_oled@>=3.2.0 ; simple and small OLED lib by Larry Bank
|
||||
ss_oled@3.3.0 ; simple and small OLED lib by Larry Bank
|
||||
BitBang_I2C@>=1.3.0
|
||||
QRCode@>=0.0.1
|
||||
lib_deps_matrix_display =
|
||||
Ultrathin_LED_Matrix
|
||||
Ultrathin_LED_Matrix@>=1.0.0
|
||||
lib_deps_rgbled =
|
||||
SmartLeds@>=1.1.6
|
||||
lib_deps_gps =
|
||||
@ -71,6 +72,7 @@ lib_deps_sensors =
|
||||
Adafruit Unified Sensor@>=1.1.1
|
||||
Adafruit BME280 Library@>=2.0.0
|
||||
Adafruit BMP085 Library@>=1.0.1
|
||||
BSEC Software Library@1.5.1474
|
||||
lib_deps_basic =
|
||||
ArduinoJson@^5.13.1
|
||||
76@>=1.2.4 ; #76 Timezone by Jack Christensen
|
||||
@ -123,4 +125,4 @@ upload_protocol = esptool
|
||||
upload_protocol = esptool
|
||||
build_type = debug
|
||||
platform = https://github.com/platformio/platform-espressif32.git#develop
|
||||
platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git
|
||||
platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git
|
||||
@ -180,7 +180,7 @@ void bme_storedata(bmeStatus_t *bme_store) {
|
||||
iaqSensor.humidity; // humidity in % relative humidity x1000
|
||||
bme_store->pressure = // pressure in Pascal
|
||||
(iaqSensor.pressure / 100.0); // conversion Pa -> hPa
|
||||
bme_store->iaq = iaqSensor.iaqEstimate;
|
||||
bme_store->iaq = iaqSensor.iaq;
|
||||
bme_store->iaq_accuracy = iaqSensor.iaqAccuracy;
|
||||
bme_store->gas = iaqSensor.gasResistance; // gas resistance in ohms
|
||||
updateState();
|
||||
|
||||
@ -78,9 +78,11 @@ void init_display(bool verbose) {
|
||||
|
||||
// init display
|
||||
#ifndef DISPLAY_FLIP
|
||||
oledInit(OLED_128x64, false, false, -1, -1, 400000L);
|
||||
oledInit(OLED_128x64, false, false, -1, -1,
|
||||
MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
|
||||
#else
|
||||
oledInit(OLED_128x64, true, false, -1, -1, 400000L);
|
||||
oledInit(OLED_128x64, true, false, -1, -1,
|
||||
MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
|
||||
#endif
|
||||
|
||||
// set display buffer
|
||||
@ -151,9 +153,11 @@ void init_display(bool verbose) {
|
||||
|
||||
void refreshTheDisplay(bool nextPage) {
|
||||
|
||||
static uint8_t DisplayPage = 0;
|
||||
#ifndef HAS_BUTTON
|
||||
static uint32_t framecounter = 0;
|
||||
#endif
|
||||
|
||||
// update histogram if we have a display
|
||||
// update histogram
|
||||
oledPlotCurve(macs.size(), false);
|
||||
|
||||
// if display is switched off we don't refresh it to relax cpu
|
||||
@ -173,12 +177,15 @@ void refreshTheDisplay(bool nextPage) {
|
||||
oledPower(cfg.screenon);
|
||||
}
|
||||
|
||||
if (nextPage) {
|
||||
DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1);
|
||||
oledFill(0, 1);
|
||||
#ifndef HAS_BUTTON
|
||||
// auto flip page if we are in unattended mode
|
||||
if ((++framecounter) > (DISPLAYCYCLE * 1000 / DISPLAYREFRESH_MS)) {
|
||||
framecounter = 0;
|
||||
nextPage = true;
|
||||
}
|
||||
#endif
|
||||
|
||||
draw_page(t, DisplayPage);
|
||||
draw_page(t, nextPage);
|
||||
oledDumpBuffer(displaybuf);
|
||||
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
@ -198,8 +205,12 @@ void shutdown_display(void) {
|
||||
}
|
||||
}
|
||||
|
||||
void draw_page(time_t t, uint8_t page) {
|
||||
void draw_page(time_t t, bool nextpage) {
|
||||
|
||||
// write display content to display buffer
|
||||
// nextpage = true -> flip 1 page
|
||||
|
||||
static uint8_t DisplayPage = 0;
|
||||
char timeState;
|
||||
#if (HAS_GPS)
|
||||
static bool wasnofix = true;
|
||||
@ -209,7 +220,14 @@ void draw_page(time_t t, uint8_t page) {
|
||||
dp_printf(0, 0, FONT_STRETCHED, 0, "PAX:%-4d",
|
||||
macs.size()); // display number of unique macs total Wifi + BLE
|
||||
|
||||
switch (page % DISPLAY_PAGES) {
|
||||
start:
|
||||
|
||||
if (nextpage) {
|
||||
DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1);
|
||||
oledFill(0, 1);
|
||||
}
|
||||
|
||||
switch (DisplayPage) {
|
||||
|
||||
// page 0: parameters overview
|
||||
// page 1: pax graph
|
||||
@ -293,8 +311,7 @@ void draw_page(time_t t, uint8_t page) {
|
||||
// LORA datarate, display inverse if ADR disabled
|
||||
dp_printf(102, 7, FONT_SMALL, !cfg.adrmode, "%-4s",
|
||||
getSfName(updr2rps(LMIC.datarate)));
|
||||
#endif // HAS_LORA
|
||||
|
||||
#endif // HAS_LORA
|
||||
break; // page0
|
||||
|
||||
// page 1: pax graph
|
||||
@ -323,16 +340,13 @@ void draw_page(time_t t, uint8_t page) {
|
||||
dp_printf(16, 5, FONT_STRETCHED, 1, "No fix");
|
||||
wasnofix = true;
|
||||
}
|
||||
|
||||
#else
|
||||
dp_printf(16, 5, FONT_STRETCHED, 1, "No GPS");
|
||||
#endif
|
||||
|
||||
break; // page2
|
||||
#else
|
||||
DisplayPage++; // next page
|
||||
#endif
|
||||
|
||||
// page 3: BME280/680
|
||||
case 3:
|
||||
|
||||
#if (HAS_BME)
|
||||
// line 2-3: Temp
|
||||
dp_printf(0, 2, FONT_STRETCHED, 0, "TMP:%-2.1f", bme_status.temperature);
|
||||
@ -343,32 +357,32 @@ void draw_page(time_t t, uint8_t page) {
|
||||
#ifdef HAS_BME680
|
||||
// line 6-7: IAQ
|
||||
dp_printf(0, 6, FONT_STRETCHED, 0, "IAQ:%-3.0f", bme_status.iaq);
|
||||
#else // is BME280 or BMP180
|
||||
#else // is BME280 or BMP180
|
||||
// line 6-7: Pre
|
||||
dp_printf(0, 6, FONT_STRETCHED, 0, "PRE:%-2.1f", bme_status.pressure);
|
||||
#endif // HAS_BME
|
||||
|
||||
#endif // HAS_BME680
|
||||
break; // page 3
|
||||
#else
|
||||
dp_printf(16, 5, FONT_STRETCHED, 1, "No BME");
|
||||
#endif
|
||||
|
||||
break; // page3
|
||||
DisplayPage++; // next page
|
||||
#endif // HAS_BME
|
||||
|
||||
// page 4: time
|
||||
case 4:
|
||||
|
||||
dp_printf(0, 4, FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t),
|
||||
second(t));
|
||||
break;
|
||||
|
||||
// page 5: blank screen
|
||||
case 5:
|
||||
|
||||
#ifdef HAS_BUTTON
|
||||
oledFill(0, 1);
|
||||
break;
|
||||
#else // don't show blank page if we are unattended
|
||||
DisplayPage++; // next page
|
||||
#endif
|
||||
|
||||
default:
|
||||
break; // default
|
||||
goto start; // start over
|
||||
|
||||
} // switch
|
||||
|
||||
|
||||
@ -43,7 +43,7 @@
|
||||
#define LORA_IRQ DIO0
|
||||
#define LORA_IO1 DIO1
|
||||
#define LORA_IO2 DIO2
|
||||
#define LORA_SCK SCK
|
||||
#define LORA_SCK GPIO_NUM_5
|
||||
#define LORA_MISO MISO
|
||||
#define LORA_MOSI MOSI
|
||||
#define LORA_RST RST_LoRa
|
||||
|
||||
62
src/hal/m5stack.h
Normal file
62
src/hal/m5stack.h
Normal file
@ -0,0 +1,62 @@
|
||||
// clang-format off
|
||||
// upload_speed 921600
|
||||
// board M5Stack-Core-ESP32
|
||||
|
||||
// EXPERIMENTAL VERSION - NOT TESTED ON M5 HARDWARE YET
|
||||
|
||||
#ifndef _M5STACK_H
|
||||
#define _M5STACK_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module
|
||||
|
||||
// Pins for LORA chip SPI interface, reset line and interrupt lines
|
||||
#define LORA_SCK SCK
|
||||
#define LORA_CS SS
|
||||
#define LORA_MISO MISO
|
||||
#define LORA_MOSI MOSI
|
||||
#define LORA_RST GPIO_NUM_36
|
||||
#define LORA_IRQ GPIO_NUM_26
|
||||
#define LORA_IO1 GPIO_NUM_34 // must be externally wired on PCB!
|
||||
#define LORA_IO2 LMIC_UNUSED_PIN
|
||||
|
||||
|
||||
// enable only if you want to store a local paxcount table on the device
|
||||
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
|
||||
// Pins for SD-card
|
||||
#define SDCARD_CS GPIO_NUM_4
|
||||
#define SDCARD_MOSI MOSI
|
||||
#define SDCARD_MISO MISO
|
||||
#define SDCARD_SCLK SCK
|
||||
|
||||
// user defined sensors
|
||||
//#define HAS_SENSORS 1 // comment out if device has user defined sensors
|
||||
|
||||
#define CFG_sx1276_radio 1 // select LoRa chip
|
||||
#define BOARD_HAS_PSRAM // use if board has external PSRAM
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
//#define HAS_DISPLAY 1
|
||||
//#define DISPLAY_FLIP 1 // use if display is rotated
|
||||
//#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
//#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
|
||||
|
||||
#define HAS_LED NOT_A_PIN // no on board LED (?)
|
||||
#define HAS_BUTTON (39) // on board button A
|
||||
|
||||
// GPS settings
|
||||
#define HAS_GPS 1 // use on board GPS
|
||||
#define GPS_SERIAL 9600, SERIAL_8N1, RXD2, TXD2 // UBlox NEO 6M RX, TX
|
||||
#define GPS_INT GPIO_NUM_35 // 30ns accurary timepulse, to be external wired on pcb: shorten R12!
|
||||
|
||||
// Pins for interface of LC Display
|
||||
#define MY_OLED_CS GPIO_NUM_14
|
||||
#define MY_OLED_DC GPIO_NUM_27
|
||||
#define MY_OLED_CLK GPIO_NUM_18
|
||||
#define MY_OLED_RST GPIO_NUM_33
|
||||
#define MY_OLED_BL GPIO_NUM_32
|
||||
#define MY_OLED_MOSI GPIO_NUM_23
|
||||
#define MY_OLED_MISO GPIO_NUM_23
|
||||
|
||||
#endif
|
||||
@ -44,10 +44,13 @@ void start_ota_update() {
|
||||
|
||||
// init display
|
||||
#ifdef HAS_DISPLAY
|
||||
|
||||
#ifndef DISPLAY_FLIP
|
||||
oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L);
|
||||
oledInit(OLED_128x64, false, false, -1, -1,
|
||||
MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
|
||||
#else
|
||||
oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L);
|
||||
oledInit(OLED_128x64, true, false, -1, -1,
|
||||
MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
|
||||
#endif
|
||||
|
||||
// set display buffer
|
||||
|
||||
@ -57,6 +57,7 @@
|
||||
#define RGBLUMINOSITY 30 // RGB LED luminosity [default = 30%]
|
||||
#define DISPLAYREFRESH_MS 40 // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second
|
||||
#define DISPLAYCONTRAST 80 // 0 .. 255, OLED display contrast [default = 80]
|
||||
#define DISPLAYCYCLE 3 // Auto page flip delay in sec [default = 2] for devices without button
|
||||
#define HOMECYCLE 30 // house keeping cycle in seconds [default = 30 secs]
|
||||
|
||||
// Settings for BME680 environmental sensor
|
||||
@ -76,7 +77,7 @@
|
||||
#define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off
|
||||
#define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0]
|
||||
#define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0]
|
||||
#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
|
||||
#define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
|
||||
|
||||
// settings for syncing time with timeserver applications
|
||||
#define TIME_SYNC_SAMPLES 1 // number of time requests for averaging
|
||||
@ -93,7 +94,7 @@
|
||||
#define RCMDPORT 2 // remote commands
|
||||
#define STATUSPORT 2 // remote command results
|
||||
#define CONFIGPORT 3 // config query results
|
||||
#define GPSPORT 4 // gps - set to 1 to send combined GPS+COUNTERPORT payload
|
||||
#define GPSPORT 1 // gps - set to 1 to send combined GPS+COUNTERPORT payload
|
||||
#define BUTTONPORT 5 // button pressed signal
|
||||
#define BEACONPORT 6 // beacon alarms
|
||||
#define BMEPORT 7 // BME680 sensor
|
||||
|
||||
Loading…
Reference in New Issue
Block a user