RGB led library migration

src/hal/eboxtube.h

@@ -15,7 +15,7 @@
 
 #define HAS_LED (22)     // Green LED on board
 #define RGB_LED_COUNT 1 // we have 1 LED
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, RGB_LED_COUNT, GPIO_NUM_2) // WS2812B RGB LED on board
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_2, GRB>(leds, RGB_LED_COUNT);
 #define HAS_BUTTON (0)   // button "FLASH" on board
 #define DISABLE_BROWNOUT 1      // comment out if you want to keep brownout feature
 

src/hal/fipy.h

@@ -13,7 +13,8 @@
 
 #define CFG_sx1272_radio 1
 #define HAS_LED NOT_A_PIN      // FiPy has no on board LED, so we use RGB LED
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
 #define BOARD_HAS_PSRAM        // use extra 4MB extern RAM
 
 // Pins for LORA chip SPI interface, reset line and interrupt lines

src/hal/generic.h

@@ -72,7 +72,8 @@
 
 #define HAS_LED (21) // on board  LED
 #define HAS_BUTTON (39) // on board button
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
 
 // GPS settings
 #define HAS_GPS 1 // use on board GPS

src/hal/lolin32litelora.h

@@ -17,7 +17,8 @@
 //#define MY_DISPLAY_FLIP  1 // uncomment this for rotated display
 #define HAS_LED       22  // ESP32 GPIO12 (pin22) On Board LED (set to NOT_A_PIN to disable)
 #define LED_ACTIVE_LOW 1  // Onboard LED is active when pin is LOW
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_13) // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
 #define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 #define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 

src/hal/lolin32lora.h

@@ -18,7 +18,8 @@
 #define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it
 #define LED_ACTIVE_LOW 1  // Onboard LED is active when pin is LOW
                           // Anyway shield is on over the LoLin32 board, so we won't be able to see this LED
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_13) // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_13, GRB>(leds, RGB_LED_COUNT);
 #define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 #define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 

src/hal/lopy.h

@@ -12,7 +12,8 @@
 #define HAS_LORA 1       // comment out if device shall not send data via LoRa
 #define CFG_sx1272_radio 1
 #define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0 (P2)
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
 
 // Note: Pins for LORA chip SPI interface come from board file pins_arduino.h
 

src/hal/lopy4.h

@@ -21,7 +21,8 @@
 #define CFG_sx1276_radio 1
 #define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
 #define RGB_LED_COUNT 1 // we have 1 LEDs
-#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, RGB_LED_COUNT, GPIO_NUM_0) // WS2812B RGB LED on GPIO0 (P2)
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
 #define BOARD_HAS_PSRAM // use extra 4MB extern RAM
 
 // Note: Pins for LORA chip SPI interface come from board file pins_arduino.h

src/hal/m5fire.h

@@ -33,7 +33,8 @@
 #define HAS_LED NOT_A_PIN // no on board LED (?)
 #define RGB_LED_COUNT 10
 
-#define HAS_RGB_LED SmartLed rgb_led(LED_SK6812, RGB_LED_COUNT, GPIO_NUM_15) // LED_SK6812 RGB LED on GPIO15
+#define RGB_LED_COUNT 1 // we have 1 LED
+#define HAS_RGB_LED FastLED.addLeds<SK6812, GPIO_NUM_15, GRB>(leds, RGB_LED_COUNT);
 #define HAS_BUTTON (39) // on board button A
 
 // power management settings

src/hal/octopus32.h

@@ -22,7 +22,8 @@
 
 #define HAS_LED        13  // ESP32 GPIO12 (pin22) On Board LED
 //#define LED_ACTIVE_LOW 1  // Onboard LED is active when pin is LOW
-//#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_13) // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
+//#define RGB_LED_COUNT 1 // we have 1 LED
+//#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_13, GRB>(leds, RGB_LED_COUNT);
 //#define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 //#define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown