DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #186 from cyberman54/development

Browse Source 
eboxtube.h added; renamed GPS_QUECTEL_L76 to GPS_I2C
This commit is contained in:
Verkehrsrot 2018-10-21 10:27:57 +02:00 committed by GitHub
commit 8eb4cc660d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 28 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
include/gps.h
View File

@ -4,7 +4,7 @@
#include <TinyGPS++.h> // library for parsing NMEA data
#include <TimeLib.h>
#ifdef GPS_QUECTEL_L76 // Needed for reading from I2C Bus
#ifdef GPS_I2C // Needed for reading from I2C Bus
#include <Wire.h>
#endif

6
src/gps.cpp
View File

@ -28,9 +28,9 @@ void gps_loop(void *pvParameters) {
HardwareSerial GPS_Serial(1);
GPS_Serial.begin(GPS_SERIAL);
#elif defined GPS_QUECTEL_L76
#elif defined GPS_I2C
uint8_t ret;
Wire.begin(GPS_QUECTEL_L76, 400000); // I2C connect to GPS device with 400 KHz
Wire.begin(GPS_I2C, 400000); // I2C connect to GPS device with 400 KHz
Wire.beginTransmission(GPS_ADDR);
Wire.write(0x00); // dummy write
ret = Wire.endTransmission(); // check if chip is seen on i2c bus
@ -55,7 +55,7 @@ void gps_loop(void *pvParameters) {
while (GPS_Serial.available()) {
gps.encode(GPS_Serial.read());
}
#elif defined GPS_QUECTEL_L76
#elif defined GPS_I2C
Wire.requestFrom(GPS_ADDR, 32); // caution: this is a blocking call
while (Wire.available()) {
gps.encode(Wire.read());

22
src/hal/eboxtube.h Normal file
View File

@ -0,0 +1,22 @@
// Hardware related definitions for ebox ESP32-bit with external connected RFM95 LoRa
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define HAS_SPI 1 // comment out if device shall not send data via SPI
#define CFG_sx1276_radio 1
#define HAS_LED GPIO_NUM_22 // Green LED on board
#define HAS_RGB_LED GPIO_NUM_2 // WS2812B RGB LED on board
#define HAS_BUTTON GPIO_NUM_0 // button "FLASH" on board
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
// non arduino pin definitions
#define RST GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)

2
src/hal/lopy.h
View File

@ -22,7 +22,7 @@
// uncomment this only if your LoPy runs on a PYTRACK BOARD
//#define HAS_GPS 1
//#define GPS_QUECTEL_L76 GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
//#define GPS_I2C GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
//#define GPS_ADDR 0x10
// uncomment this only if your LoPy runs on a EXPANSION BOARD

2
src/hal/lopy4.h
View File

@ -23,7 +23,7 @@
// uncomment this only if your LoPy runs on a PYTRACK BOARD
//#define HAS_GPS 1
//#define GPS_QUECTEL_L76 GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
//#define GPS_I2C GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21)
//#define GPS_ADDR 0x10
// uncomment this only if your LoPy runs on a EXPANSION BOARD