DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #966 from cyberman54/development

Browse Source 
Development
This commit is contained in:
Verkehrsrot 2023-05-20 18:10:18 +02:00 committed by GitHub
commit 8ad22c92cc
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
6 changed files with 50 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
platformio_orig.ini
View File

@ -47,7 +47,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 3.5.0
release_version = 3.6.0
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3
@ -55,7 +55,7 @@ extra_scripts = pre:src/build.py
otakeyfile = ota.conf
lorakeyfile = loraconf.h
lmicconfigfile = lmic_config.h
platform_espressif32 = espressif32@6.0.1
platform_espressif32 = espressif32@6.3.0
monitor_speed = 115200
upload_speed = 115200 ; set by build.py and taken from hal file
lib_deps_lora =
@ -92,19 +92,17 @@ lib_deps_all =
${common.lib_deps_gps}
${common.lib_deps_sensors}
${common.lib_deps_ledmatrix}
build_flags_basic =
build_flags_all =
-include "src/paxcounter.conf"
'-DCORE_DEBUG_LEVEL=${common.debug_level}'
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
'-DPROGVERSION="${common.release_version}"'
'-D CORE_DEBUG_LEVEL=${common.debug_level}'
'-D LOG_LOCAL_LEVEL=${common.debug_level}'
'-D PROGVERSION="${common.release_version}"'
'-D LIBPAX_WIFI'
'-D LIBPAX_BLE'
'-D LIBPAX_ARDUINO'
'-DUSE_ESP_IDF_LOG'
'-DTAG=__FILE__'
build_flags_all =
${common.build_flags_basic}
-mfix-esp32-psram-cache-issue
'-D USE_ESP_IDF_LOG'
'-D TAG=__FILE__'
'-U BOARD_HAS_PSRAM'
[env]
framework = arduino

20
platformio_orig_s3.ini
View File

@ -10,7 +10,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 3.5.0
release_version = 3.6.0
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3
@ -18,7 +18,7 @@ extra_scripts = pre:src/build.py
otakeyfile = ota.conf
lorakeyfile = loraconf.h
lmicconfigfile = lmic_config.h
platform_espressif32 = espressif32@6.0.1
platform_espressif32 = espressif32@6.3.0
monitor_speed = 115200
upload_speed = 115200 ; set by build.py and taken from hal file
lib_deps_all =
@ -31,19 +31,17 @@ lib_deps_all =
mathertel/OneButton @ ^2.0.3
256dpi/MQTT @ ^2.5.1
ricmoo/QRCode @ ^0.0.1
build_flags_basic =
build_flags_all =
-include "src/paxcounter.conf"
'-DCORE_DEBUG_LEVEL=${common.debug_level}'
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
'-DPROGVERSION="${common.release_version}"'
'-D CORE_DEBUG_LEVEL=${common.debug_level}'
'-D LOG_LOCAL_LEVEL=${common.debug_level}'
'-D PROGVERSION="${common.release_version}"'
'-D LIBPAX_WIFI'
'-D LIBPAX_BLE'
'-D LIBPAX_ARDUINO'
'-DUSE_ESP_IDF_LOG'
'-DTAG=__FILE__'
build_flags_all =
${common.build_flags_basic}
-mfix-esp32-psram-cache-issue
'-D USE_ESP_IDF_LOG'
'-D TAG=__FILE__'
'-U BOARD_HAS_PSRAM'
[env]
framework = arduino

2
src/display.cpp
View File

@ -142,7 +142,7 @@ void dp_init(bool verbose) {
void dp_refresh(bool nextPage) {
struct count_payload_t count; // libpax count storage
static uint8_t DisplayPage = 0;
char timeState, strftime_buf[64];
char timeState, strftime_buf[45];
time_t now;
struct tm timeinfo = {0};
#ifndef HAS_BUTTON

44
src/hal/generic.h
View File

@ -11,12 +11,12 @@
// generic.h is kitchensink with all available options
#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no LoRa
#define HAS_SPI 1 // comment out if device shall not send data via SPI
//#define HAS_SPI 1 // comment out if device shall not send data via SPI
// pin definitions for SPI slave interface
#define SPI_MOSI GPIO_NUM_23
#define SPI_MISO GPIO_NUM_19
#define SPI_SCLK GPIO_NUM_18
#define SPI_CS GPIO_NUM_5
//#define SPI_MOSI GPIO_NUM_23
//#define SPI_MISO GPIO_NUM_19
//#define SPI_SCLK GPIO_NUM_18
//#define SPI_CS GPIO_NUM_5
// enable only if you want to store a local paxcount table on the device
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
@ -35,9 +35,9 @@
// for loading necessary libraries
// BME680 sensor on I2C bus
#define HAS_BME 1 // Enable BME sensors in general
#define HAS_BME680 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
#define BME680_ADDR BME68X_I2C_ADDR_LOW // connect SDIO of BME680 to GND
//#define HAS_BME 1 // Enable BME sensors in general
//#define HAS_BME680 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
//#define BME680_ADDR BME68X_I2C_ADDR_LOW // connect SDIO of BME680 to GND
// BME280 sensor on I2C bus
//#define HAS_BME 1 // Enable BME sensors in general
@ -49,10 +49,10 @@
//#define BMP180_ADDR 0x77
// SDS011 dust sensor settings
#define HAS_SDS011 1 // use SDS011
//#define HAS_SDS011 1 // use SDS011
// used pins on the ESP-side:
#define SDS_TX 19 // connect to RX on the SDS011
#define SDS_RX 23 // connect to TX on the SDS011
//#define SDS_TX 19 // connect to RX on the SDS011
//#define SDS_RX 23 // connect to TX on the SDS011
// up to three user defined sensors (if connected)
//#define HAS_SENSOR_1 1 // comment out if device has user defined sensor #1
@ -64,29 +64,29 @@
//#define BOARD_HAS_PSRAM // use if board has external SPIRAM, note: this will reduce IRAM0 by 64KB for SPIRAM cache
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY 1
//#define HAS_DISPLAY 1
//#define MY_DISPLAY_FLIP 1 // use if display is rotated
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
#define HAS_LED (21) // on board LED
#define HAS_BUTTON (39) // on board button
#define RGB_LED_COUNT 1 // we have 1 LED
#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
//#define RGB_LED_COUNT 1 // we have 1 LED
//#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
// GPS settings
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M RX, TX
#define GPS_INT GPIO_NUM_13 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO13
//#define HAS_GPS 1 // use on board GPS
//#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M RX, TX
//#define GPS_INT GPIO_NUM_13 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO13
// Pins for I2C interface of OLED Display
#define MY_DISPLAY_SDA (4)
#define MY_DISPLAY_SCL (15)
#define MY_DISPLAY_RST (16)
//#define MY_DISPLAY_SDA (4)
//#define MY_DISPLAY_SCL (15)
//#define MY_DISPLAY_RST (16)
// Settings for on board DS3231 RTC chip
#define HAS_RTC MY_DISPLAY_SDA, MY_DISPLAY_SCL // SDA, SCL
#define RTC_INT GPIO_NUM_34 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
//#define HAS_RTC MY_DISPLAY_SDA, MY_DISPLAY_SCL // SDA, SCL
//#define RTC_INT GPIO_NUM_34 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
// Settings for IF482 interface
//#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters

17
src/hal/m5fire.h
View File

@ -1,7 +1,6 @@
// clang-format off
// upload_speed 921600
// board m5stack-core-esp32
// b0ard m5stack-fire -> does not compile due to IRAM0 shortage, because 64KB of 192KB used for caching external SPIRAM
// board m5stack-fire
// note use of GPIO16/17
// https://www.bjoerns-techblog.de/2019/03/m5stack-fire-eine-uebersicht/
@ -22,18 +21,18 @@
#define LORA_IO2 LMIC_UNUSED_PIN
// enable only if you want to store a local paxcount table on the device
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
#define SDCARD_CS GPIO_NUM_4
#define SDCARD_MOSI MOSI
#define SDCARD_MISO MISO
#define SDCARD_SCLK SCK
//#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
//#define SDCARD_CS GPIO_NUM_4
//#define SDCARD_MOSI MOSI
//#define SDCARD_MISO MISO
//#define SDCARD_SCLK SCK
#define CFG_sx1276_radio 1 // select LoRa chip
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_LED NOT_A_PIN // no on board LED (?)
#define RGB_LED_COUNT 10 // M5fire has a stripe of 10 RGB Pixels
#define HAS_RGB_LED FastLED.addLeds<SK6812, GPIO_NUM_15, GRB>(leds, RGB_LED_COUNT);
//#define RGB_LED_COUNT 10 // M5fire has a stripe of 10 RGB Pixels
//#define HAS_RGB_LED FastLED.addLeds<SK6812, GPIO_NUM_15, GRB>(leds, RGB_LED_COUNT);
#define HAS_BUTTON (39) // on board button A
// power management settings

2
src/lmic_config.h
View File

@ -106,4 +106,4 @@
//#define USE_MBEDTLS_AES
// Define this for devices with external power.
//#define LMIC_MCMD_DEVS_BATT_DEFAULT MCMD_DEVS_EXT_POWER
//#define LMIC_MCMD_DEVS_BATT_DEFAULT MCMD_DEVS_EXT_POWER