DigitalInfinity/ESP32-PaxCounter
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

v1.7.2

Browse Source
This commit is contained in:
Klaus K Wilting committed 2019-02-09 16:10:21 +01:00
1 parent bac9540d52
commit 70fb3ecd45
5 files changed
+30 -30
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

src/hal/generic.h
+10 -7
View File
@@ -40,25 +40,28 @@
#define BOARD_HAS_PSRAM // use extra 4MB extern RAM
#define HAS_GPS 1 // use if board has GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO 6M or 7M with default configuration
// GPS settings
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M
#define GPS_INT GPIO_NUM_34 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO34
#define GPS_CLK (1000) // pulse length 100ms, accuracy +/- 3 *e-8 [nanoseconds] = 0,95sec / year
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (4)
#define MY_OLED_SCL (15)
#define MY_OLED_RST (16)
// Pins for on board DS3231 RTC chip
// Settings for on board DS3231 RTC chip
#define HAS_RTC MY_OLED_SDA, MY_OLED_SCL // SDA, SCL
#define RTC_INT GPIO_NUM_34 // interrupt input from rtc
#define RTC_CLK (1000) // frequency of RTC clock signal in ms
#define RTC_INT GPIO_NUM_34 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
#define RTC_CLK (1000) // pulse length 1000ms
// Settings for IF482 interface
#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
//#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
// Settings for DCF77 interface
#define HAS_DCF77 GPIO_NUM_1
//#define DCF77_ACTIVE_LOW 1
#define DCF77_ACTIVE_LOW 1
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5)
src/hal/ttgobeam.h
+10 -13
View File
@@ -22,30 +22,27 @@
// GPS settings
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
// to use
#define GPS_INT GPIO_NUM_34 // 30ns accurary timepulse, to be external wired on pcb: R34 -> GPIO34
// 1 pulse per second, synchronized at rising edge, pulse length 100ms, accuracy +/- 3 *e-8 [nanoseconds] = 0,95sec / year
#define GPS_CLK (1000)
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M
//#define GPS_INT GPIO_NUM_34 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO34
//#define GPS_CLK (1000) // pulse length 100ms, accuracy +/- 3 *e-8 [nanoseconds] = 0,95sec / year
// enable only if device has these sensors, otherwise comment these lines
// BME680 sensor on I2C bus
#define HAS_BME SDA, SCL
#define BME_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
//#define HAS_BME SDA, SCL
//#define BME_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
// display (if connected)
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define MY_OLED_SDA SDA
#define MY_OLED_SCL SCL
#define MY_OLED_RST U8X8_PIN_NONE
//#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
//#define MY_OLED_SDA SDA
//#define MY_OLED_SCL SCL
//#define MY_OLED_RST U8X8_PIN_NONE
//#define DISPLAY_FLIP 1 // use if display is rotated
// Settings for DCF77 interface
//#define HAS_DCF77 GPIO_NUM_13
// Settings for IF482 interface
#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
//#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
// user defined sensors (if connected)
//#define HAS_SENSORS 1 // comment out if device has user defined sensors
src/hal/ttgofox.h
+5 -5
View File
@@ -23,18 +23,18 @@
// Settings for on board DS3231 RTC chip
#define HAS_RTC MY_OLED_SDA, MY_OLED_SCL // SDA, SCL
//#define RTC_INT GPIO_NUM_34 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
//#define RTC_CLK (1000) // frequency of RTC clock signal in ms
//#define RTC_CLK (1000) // pulse length 1000ms
// Settings for IF482 interface
//#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
// Settings for DCF77 interface
#define HAS_DCF77 GPIO_NUM_14
#define DCF77_ACTIVE_LOW 1
//#define HAS_DCF77 GPIO_NUM_14
//#define DCF77_ACTIVE_LOW 1
// Settings for external GPS chip
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO 6M or 7M with default configuration
//#define HAS_GPS 1 // use on board GPS
//#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO 6M or 7M with default configuration
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5)