support TTGO21 v1.6 added
This commit is contained in:
parent
e523f5998b
commit
468d054fd2
@ -49,6 +49,9 @@ Depending on board hardware following features are supported:
|
||||
Target platform must be selected in [platformio.ini](https://github.com/cyberman54/ESP32-Paxcounter/blob/master/platformio.ini).<br>
|
||||
Hardware dependent settings (pinout etc.) are stored in board files in /hal directory.<br>
|
||||
|
||||
<b>A suitable board with paxcounter software preloaded can be purchased via AliExpress
|
||||
<A HREF="https://bit.ly/2MXqZh2">here</A></b>.<br>
|
||||
|
||||
<b>3D printable cases</b> can be found (and, if wanted so, ordered) on Thingiverse, see
|
||||
<A HREF="https://www.thingiverse.com/thing:2670713">Heltec</A>, <A HREF="https://www.thingiverse.com/thing:2811127">TTGOv2</A>, <A HREF="https://www.thingiverse.com/thing:3005574">TTGOv2.1</A>, <A HREF="https://www.thingiverse.com/thing:3041339">T-BEAM</A> for example.<br>
|
||||
|
||||
|
@ -11,8 +11,8 @@
|
||||
|
||||
; ---> SELECT TARGET PLATFORM HERE! <---
|
||||
[platformio]
|
||||
;env_default = generic
|
||||
env_default = ebox
|
||||
env_default = generic
|
||||
;env_default = ebox
|
||||
;env_default = heltec
|
||||
;env_default = ttgov1
|
||||
;env_default = ttgov2
|
||||
@ -44,13 +44,13 @@ build_flags =
|
||||
; otherwise device may leak RAM
|
||||
;
|
||||
; None
|
||||
-DCORE_DEBUG_LEVEL=0
|
||||
; -DCORE_DEBUG_LEVEL=0
|
||||
; Error
|
||||
; -DCORE_DEBUG_LEVEL=1
|
||||
; Warn
|
||||
; -DCORE_DEBUG_LEVEL=2
|
||||
; Info
|
||||
; -DCORE_DEBUG_LEVEL=3
|
||||
-DCORE_DEBUG_LEVEL=3
|
||||
; Debug
|
||||
; -DCORE_DEBUG_LEVEL=4
|
||||
; Verbose
|
||||
|
@ -1,18 +1,51 @@
|
||||
/* Hardware related definitions for TTGO V2.1 Board
|
||||
/ ATTENTION: check your board version!
|
||||
/ Different versions are on the market which need different settings in this file:
|
||||
/ - without label -> "old"
|
||||
/ - labelled v1.5 on pcb -> "old"
|
||||
/ - labelled v1.6 on pcb -> "new"
|
||||
/ - without label -> settings (2)
|
||||
/ - labeled v1.5 on pcb -> settings (2)
|
||||
/ - labeled v1.6 on pcb -> settings (1)
|
||||
/ Choose the right configuration below
|
||||
*/
|
||||
|
||||
// (1) settings for board labeled "t3 v1.6" on pcb
|
||||
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define HAS_SPI 1 // comment out if device shall not send data via SPI
|
||||
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_LED GPIO_NUM_23 // green on board LED
|
||||
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // uses GPIO7
|
||||
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
//#define RST GPIO_NUM_23 // ESP32 GPIO23 <-> HPD13A RESET
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN (old board)
|
||||
//#define RST GPIO_NUM_12 // (boards labeled v1.5)
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
|
||||
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1
|
||||
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2
|
||||
|
||||
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
|
||||
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
|
||||
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO21 -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO22 -- SD1306 D0
|
||||
|
||||
/*
|
||||
// (2) settings for boards without label on pcb, or labeled v1.5 on pcb
|
||||
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define HAS_SPI 1 // comment out if device shall not send data via SPI
|
||||
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define DISPLAY_FLIP 1 // rotated display
|
||||
#define HAS_LED GPIO_NUM_23 // green on board LED (new board ONLY)
|
||||
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // uses GPIO7
|
||||
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
|
||||
|
||||
@ -24,8 +57,7 @@
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN (old board)
|
||||
//#define RST GPIO_NUM_12 // (old board v1.5)
|
||||
//#define RST GPIO_NUM_19 //(new board)
|
||||
//#define RST GPIO_NUM_12 // (boards labeled v1.5)
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
|
||||
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1
|
||||
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2
|
||||
@ -33,4 +65,5 @@
|
||||
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
|
||||
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
|
||||
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO21 -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO22 -- SD1306 D0
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO22 -- SD1306 D0
|
||||
*/
|
Loading…
Reference in New Issue
Block a user