DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

v1.7.841

Browse Source
This commit is contained in:
Verkehrsrot 2019-07-25 23:25:33 +02:00
parent 06f493aaae
commit 229c1d114e
3 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
platformio.ini
View File

@ -7,7 +7,7 @@
; ---> SELECT THE TARGET PLATFORM HERE! <---
[board]
;halfile = generic.h
halfile = generic.h
;halfile = ebox.h
;halfile = eboxtube.h
;halfile = ecopower.h
@ -18,7 +18,7 @@
;halfile = ttgov21old.h
;halfile = ttgov21new.h
;halfile = ttgofox.h
halfile = ttgobeam.h
;halfile = ttgobeam.h
;halfile = fipy.h
;halfile = lopy.h
;halfile = lopy4.h
@ -81,7 +81,7 @@ lib_deps_all =
build_flags_basic =
-include "src/hal/${board.halfile}"
-include "src/paxcounter.conf"
;-w
-w
'-DCORE_DEBUG_LEVEL=${common.debug_level}'
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
'-DPROGVERSION="${common.release_version}"'

8
src/hal/ttgobeam.h
View File

@ -25,13 +25,13 @@
// GPS settings
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M
#define GPS_INT GPIO_NUM_34 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO34
//#define GPS_INT GPIO_NUM_34 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO34
// enable only if device has these sensors, otherwise comment these lines
// BME680 sensor on I2C bus
#define HAS_BME 1 // Enable BME sensors in general
#define HAS_BME680 SDA, SCL
#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
//#define HAS_BME 1 // Enable BME sensors in general
//#define HAS_BME680 SDA, SCL
//#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
// display (if connected)
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C

2
src/paxcounter.conf
View File

@ -71,7 +71,7 @@
#define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off
#define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0]
#define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0]
#define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
// settings for syncing time with timeserver applications
#define TIME_SYNC_SAMPLES 1 // number of time requests for averaging