546 lines
16 KiB
C
546 lines
16 KiB
C
/**
|
|
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* Neither the name of the copyright holder nor the names of the
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
|
|
* OR CONTRIBUTORS BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
|
*
|
|
* The information provided is believed to be accurate and reliable.
|
|
* The copyright holder assumes no responsibility
|
|
* for the consequences of use
|
|
* of such information nor for any infringement of patents or
|
|
* other rights of third parties which may result from its use.
|
|
* No license is granted by implication or otherwise under any patent or
|
|
* patent rights of the copyright holder.
|
|
*
|
|
* @file bme680_defs.h
|
|
* @date 19 Jun 2018
|
|
* @version 3.5.9
|
|
* @brief
|
|
*
|
|
*/
|
|
|
|
/*! @file bme680_defs.h
|
|
@brief Sensor driver for BME680 sensor */
|
|
/*!
|
|
* @defgroup BME680 SENSOR API
|
|
* @brief
|
|
* @{*/
|
|
#ifndef BME680_DEFS_H_
|
|
#define BME680_DEFS_H_
|
|
|
|
/********************************************************/
|
|
/* header includes */
|
|
#ifdef __KERNEL__
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#else
|
|
#include <stdint.h>
|
|
#include <stddef.h>
|
|
#endif
|
|
|
|
/******************************************************************************/
|
|
/*! @name Common macros */
|
|
/******************************************************************************/
|
|
|
|
#if !defined(UINT8_C) && !defined(INT8_C)
|
|
#define INT8_C(x) S8_C(x)
|
|
#define UINT8_C(x) U8_C(x)
|
|
#endif
|
|
|
|
#if !defined(UINT16_C) && !defined(INT16_C)
|
|
#define INT16_C(x) S16_C(x)
|
|
#define UINT16_C(x) U16_C(x)
|
|
#endif
|
|
|
|
#if !defined(INT32_C) && !defined(UINT32_C)
|
|
#define INT32_C(x) S32_C(x)
|
|
#define UINT32_C(x) U32_C(x)
|
|
#endif
|
|
|
|
#if !defined(INT64_C) && !defined(UINT64_C)
|
|
#define INT64_C(x) S64_C(x)
|
|
#define UINT64_C(x) U64_C(x)
|
|
#endif
|
|
|
|
/**@}*/
|
|
|
|
/**\name C standard macros */
|
|
#ifndef NULL
|
|
#ifdef __cplusplus
|
|
#define NULL 0
|
|
#else
|
|
#define NULL ((void *) 0)
|
|
#endif
|
|
#endif
|
|
|
|
/** BME680 configuration macros */
|
|
/** Enable or un-comment the macro to provide floating point data output */
|
|
#ifndef BME680_FLOAT_POINT_COMPENSATION
|
|
//#define BME680_FLOAT_POINT_COMPENSATION
|
|
#endif
|
|
|
|
/** BME680 General config */
|
|
#define BME680_POLL_PERIOD_MS UINT8_C(10)
|
|
|
|
/** BME680 I2C addresses */
|
|
#define BME680_I2C_ADDR_PRIMARY UINT8_C(0x76)
|
|
#define BME680_I2C_ADDR_SECONDARY UINT8_C(0x77)
|
|
|
|
/** BME680 unique chip identifier */
|
|
#define BME680_CHIP_ID UINT8_C(0x61)
|
|
|
|
/** BME680 coefficients related defines */
|
|
#define BME680_COEFF_SIZE UINT8_C(41)
|
|
#define BME680_COEFF_ADDR1_LEN UINT8_C(25)
|
|
#define BME680_COEFF_ADDR2_LEN UINT8_C(16)
|
|
|
|
/** BME680 field_x related defines */
|
|
#define BME680_FIELD_LENGTH UINT8_C(15)
|
|
#define BME680_FIELD_ADDR_OFFSET UINT8_C(17)
|
|
|
|
/** Soft reset command */
|
|
#define BME680_SOFT_RESET_CMD UINT8_C(0xb6)
|
|
|
|
/** Error code definitions */
|
|
#define BME680_OK INT8_C(0)
|
|
/* Errors */
|
|
#define BME680_E_NULL_PTR INT8_C(-1)
|
|
#define BME680_E_COM_FAIL INT8_C(-2)
|
|
#define BME680_E_DEV_NOT_FOUND INT8_C(-3)
|
|
#define BME680_E_INVALID_LENGTH INT8_C(-4)
|
|
|
|
/* Warnings */
|
|
#define BME680_W_DEFINE_PWR_MODE INT8_C(1)
|
|
#define BME680_W_NO_NEW_DATA INT8_C(2)
|
|
|
|
/* Info's */
|
|
#define BME680_I_MIN_CORRECTION UINT8_C(1)
|
|
#define BME680_I_MAX_CORRECTION UINT8_C(2)
|
|
|
|
/** Register map */
|
|
/** Other coefficient's address */
|
|
#define BME680_ADDR_RES_HEAT_VAL_ADDR UINT8_C(0x00)
|
|
#define BME680_ADDR_RES_HEAT_RANGE_ADDR UINT8_C(0x02)
|
|
#define BME680_ADDR_RANGE_SW_ERR_ADDR UINT8_C(0x04)
|
|
#define BME680_ADDR_SENS_CONF_START UINT8_C(0x5A)
|
|
#define BME680_ADDR_GAS_CONF_START UINT8_C(0x64)
|
|
|
|
/** Field settings */
|
|
#define BME680_FIELD0_ADDR UINT8_C(0x1d)
|
|
|
|
/** Heater settings */
|
|
#define BME680_RES_HEAT0_ADDR UINT8_C(0x5a)
|
|
#define BME680_GAS_WAIT0_ADDR UINT8_C(0x64)
|
|
|
|
/** Sensor configuration registers */
|
|
#define BME680_CONF_HEAT_CTRL_ADDR UINT8_C(0x70)
|
|
#define BME680_CONF_ODR_RUN_GAS_NBC_ADDR UINT8_C(0x71)
|
|
#define BME680_CONF_OS_H_ADDR UINT8_C(0x72)
|
|
#define BME680_MEM_PAGE_ADDR UINT8_C(0xf3)
|
|
#define BME680_CONF_T_P_MODE_ADDR UINT8_C(0x74)
|
|
#define BME680_CONF_ODR_FILT_ADDR UINT8_C(0x75)
|
|
|
|
/** Coefficient's address */
|
|
#define BME680_COEFF_ADDR1 UINT8_C(0x89)
|
|
#define BME680_COEFF_ADDR2 UINT8_C(0xe1)
|
|
|
|
/** Chip identifier */
|
|
#define BME680_CHIP_ID_ADDR UINT8_C(0xd0)
|
|
|
|
/** Soft reset register */
|
|
#define BME680_SOFT_RESET_ADDR UINT8_C(0xe0)
|
|
|
|
/** Heater control settings */
|
|
#define BME680_ENABLE_HEATER UINT8_C(0x00)
|
|
#define BME680_DISABLE_HEATER UINT8_C(0x08)
|
|
|
|
/** Gas measurement settings */
|
|
#define BME680_DISABLE_GAS_MEAS UINT8_C(0x00)
|
|
#define BME680_ENABLE_GAS_MEAS UINT8_C(0x01)
|
|
|
|
/** Over-sampling settings */
|
|
#define BME680_OS_NONE UINT8_C(0)
|
|
#define BME680_OS_1X UINT8_C(1)
|
|
#define BME680_OS_2X UINT8_C(2)
|
|
#define BME680_OS_4X UINT8_C(3)
|
|
#define BME680_OS_8X UINT8_C(4)
|
|
#define BME680_OS_16X UINT8_C(5)
|
|
|
|
/** IIR filter settings */
|
|
#define BME680_FILTER_SIZE_0 UINT8_C(0)
|
|
#define BME680_FILTER_SIZE_1 UINT8_C(1)
|
|
#define BME680_FILTER_SIZE_3 UINT8_C(2)
|
|
#define BME680_FILTER_SIZE_7 UINT8_C(3)
|
|
#define BME680_FILTER_SIZE_15 UINT8_C(4)
|
|
#define BME680_FILTER_SIZE_31 UINT8_C(5)
|
|
#define BME680_FILTER_SIZE_63 UINT8_C(6)
|
|
#define BME680_FILTER_SIZE_127 UINT8_C(7)
|
|
|
|
/** Power mode settings */
|
|
#define BME680_SLEEP_MODE UINT8_C(0)
|
|
#define BME680_FORCED_MODE UINT8_C(1)
|
|
|
|
/** Delay related macro declaration */
|
|
#define BME680_RESET_PERIOD UINT32_C(10)
|
|
|
|
/** SPI memory page settings */
|
|
#define BME680_MEM_PAGE0 UINT8_C(0x10)
|
|
#define BME680_MEM_PAGE1 UINT8_C(0x00)
|
|
|
|
/** Ambient humidity shift value for compensation */
|
|
#define BME680_HUM_REG_SHIFT_VAL UINT8_C(4)
|
|
|
|
/** Run gas enable and disable settings */
|
|
#define BME680_RUN_GAS_DISABLE UINT8_C(0)
|
|
#define BME680_RUN_GAS_ENABLE UINT8_C(1)
|
|
|
|
/** Buffer length macro declaration */
|
|
#define BME680_TMP_BUFFER_LENGTH UINT8_C(40)
|
|
#define BME680_REG_BUFFER_LENGTH UINT8_C(6)
|
|
#define BME680_FIELD_DATA_LENGTH UINT8_C(3)
|
|
#define BME680_GAS_REG_BUF_LENGTH UINT8_C(20)
|
|
|
|
/** Settings selector */
|
|
#define BME680_OST_SEL UINT16_C(1)
|
|
#define BME680_OSP_SEL UINT16_C(2)
|
|
#define BME680_OSH_SEL UINT16_C(4)
|
|
#define BME680_GAS_MEAS_SEL UINT16_C(8)
|
|
#define BME680_FILTER_SEL UINT16_C(16)
|
|
#define BME680_HCNTRL_SEL UINT16_C(32)
|
|
#define BME680_RUN_GAS_SEL UINT16_C(64)
|
|
#define BME680_NBCONV_SEL UINT16_C(128)
|
|
#define BME680_GAS_SENSOR_SEL (BME680_GAS_MEAS_SEL | BME680_RUN_GAS_SEL | BME680_NBCONV_SEL)
|
|
|
|
/** Number of conversion settings*/
|
|
#define BME680_NBCONV_MIN UINT8_C(0)
|
|
#define BME680_NBCONV_MAX UINT8_C(10)
|
|
|
|
/** Mask definitions */
|
|
#define BME680_GAS_MEAS_MSK UINT8_C(0x30)
|
|
#define BME680_NBCONV_MSK UINT8_C(0X0F)
|
|
#define BME680_FILTER_MSK UINT8_C(0X1C)
|
|
#define BME680_OST_MSK UINT8_C(0XE0)
|
|
#define BME680_OSP_MSK UINT8_C(0X1C)
|
|
#define BME680_OSH_MSK UINT8_C(0X07)
|
|
#define BME680_HCTRL_MSK UINT8_C(0x08)
|
|
#define BME680_RUN_GAS_MSK UINT8_C(0x10)
|
|
#define BME680_MODE_MSK UINT8_C(0x03)
|
|
#define BME680_RHRANGE_MSK UINT8_C(0x30)
|
|
#define BME680_RSERROR_MSK UINT8_C(0xf0)
|
|
#define BME680_NEW_DATA_MSK UINT8_C(0x80)
|
|
#define BME680_GAS_INDEX_MSK UINT8_C(0x0f)
|
|
#define BME680_GAS_RANGE_MSK UINT8_C(0x0f)
|
|
#define BME680_GASM_VALID_MSK UINT8_C(0x20)
|
|
#define BME680_HEAT_STAB_MSK UINT8_C(0x10)
|
|
#define BME680_MEM_PAGE_MSK UINT8_C(0x10)
|
|
#define BME680_SPI_RD_MSK UINT8_C(0x80)
|
|
#define BME680_SPI_WR_MSK UINT8_C(0x7f)
|
|
#define BME680_BIT_H1_DATA_MSK UINT8_C(0x0F)
|
|
|
|
/** Bit position definitions for sensor settings */
|
|
#define BME680_GAS_MEAS_POS UINT8_C(4)
|
|
#define BME680_FILTER_POS UINT8_C(2)
|
|
#define BME680_OST_POS UINT8_C(5)
|
|
#define BME680_OSP_POS UINT8_C(2)
|
|
#define BME680_RUN_GAS_POS UINT8_C(4)
|
|
|
|
/** Array Index to Field data mapping for Calibration Data*/
|
|
#define BME680_T2_LSB_REG (1)
|
|
#define BME680_T2_MSB_REG (2)
|
|
#define BME680_T3_REG (3)
|
|
#define BME680_P1_LSB_REG (5)
|
|
#define BME680_P1_MSB_REG (6)
|
|
#define BME680_P2_LSB_REG (7)
|
|
#define BME680_P2_MSB_REG (8)
|
|
#define BME680_P3_REG (9)
|
|
#define BME680_P4_LSB_REG (11)
|
|
#define BME680_P4_MSB_REG (12)
|
|
#define BME680_P5_LSB_REG (13)
|
|
#define BME680_P5_MSB_REG (14)
|
|
#define BME680_P7_REG (15)
|
|
#define BME680_P6_REG (16)
|
|
#define BME680_P8_LSB_REG (19)
|
|
#define BME680_P8_MSB_REG (20)
|
|
#define BME680_P9_LSB_REG (21)
|
|
#define BME680_P9_MSB_REG (22)
|
|
#define BME680_P10_REG (23)
|
|
#define BME680_H2_MSB_REG (25)
|
|
#define BME680_H2_LSB_REG (26)
|
|
#define BME680_H1_LSB_REG (26)
|
|
#define BME680_H1_MSB_REG (27)
|
|
#define BME680_H3_REG (28)
|
|
#define BME680_H4_REG (29)
|
|
#define BME680_H5_REG (30)
|
|
#define BME680_H6_REG (31)
|
|
#define BME680_H7_REG (32)
|
|
#define BME680_T1_LSB_REG (33)
|
|
#define BME680_T1_MSB_REG (34)
|
|
#define BME680_GH2_LSB_REG (35)
|
|
#define BME680_GH2_MSB_REG (36)
|
|
#define BME680_GH1_REG (37)
|
|
#define BME680_GH3_REG (38)
|
|
|
|
/** BME680 register buffer index settings*/
|
|
#define BME680_REG_FILTER_INDEX UINT8_C(5)
|
|
#define BME680_REG_TEMP_INDEX UINT8_C(4)
|
|
#define BME680_REG_PRES_INDEX UINT8_C(4)
|
|
#define BME680_REG_HUM_INDEX UINT8_C(2)
|
|
#define BME680_REG_NBCONV_INDEX UINT8_C(1)
|
|
#define BME680_REG_RUN_GAS_INDEX UINT8_C(1)
|
|
#define BME680_REG_HCTRL_INDEX UINT8_C(0)
|
|
|
|
/** BME680 pressure calculation macros */
|
|
/*! This max value is used to provide precedence to multiplication or division
|
|
* in pressure compensation equation to achieve least loss of precision and
|
|
* avoiding overflows.
|
|
* i.e Comparing value, BME680_MAX_OVERFLOW_VAL = INT32_C(1 << 30)
|
|
*/
|
|
#define BME680_MAX_OVERFLOW_VAL INT32_C(0x40000000)
|
|
|
|
/** Macro to combine two 8 bit data's to form a 16 bit data */
|
|
#define BME680_CONCAT_BYTES(msb, lsb) (((uint16_t)msb << 8) | (uint16_t)lsb)
|
|
|
|
/** Macro to SET and GET BITS of a register */
|
|
#define BME680_SET_BITS(reg_data, bitname, data) \
|
|
((reg_data & ~(bitname##_MSK)) | \
|
|
((data << bitname##_POS) & bitname##_MSK))
|
|
#define BME680_GET_BITS(reg_data, bitname) ((reg_data & (bitname##_MSK)) >> \
|
|
(bitname##_POS))
|
|
|
|
/** Macro variant to handle the bitname position if it is zero */
|
|
#define BME680_SET_BITS_POS_0(reg_data, bitname, data) \
|
|
((reg_data & ~(bitname##_MSK)) | \
|
|
(data & bitname##_MSK))
|
|
#define BME680_GET_BITS_POS_0(reg_data, bitname) (reg_data & (bitname##_MSK))
|
|
|
|
/** Type definitions */
|
|
/*!
|
|
* Generic communication function pointer
|
|
* @param[in] dev_id: Place holder to store the id of the device structure
|
|
* Can be used to store the index of the Chip select or
|
|
* I2C address of the device.
|
|
* @param[in] reg_addr: Used to select the register the where data needs to
|
|
* be read from or written to.
|
|
* @param[in/out] reg_data: Data array to read/write
|
|
* @param[in] len: Length of the data array
|
|
*/
|
|
typedef int8_t (*bme680_com_fptr_t)(uint8_t dev_id, uint8_t reg_addr, uint8_t *data, uint16_t len);
|
|
|
|
/*!
|
|
* Delay function pointer
|
|
* @param[in] period: Time period in milliseconds
|
|
*/
|
|
typedef void (*bme680_delay_fptr_t)(uint32_t period);
|
|
|
|
/*!
|
|
* @brief Interface selection Enumerations
|
|
*/
|
|
enum bme680_intf {
|
|
/*! SPI interface */
|
|
BME680_SPI_INTF,
|
|
/*! I2C interface */
|
|
BME680_I2C_INTF
|
|
};
|
|
|
|
/* structure definitions */
|
|
/*!
|
|
* @brief Sensor field data structure
|
|
*/
|
|
struct bme680_field_data {
|
|
/*! Contains new_data, gasm_valid & heat_stab */
|
|
uint8_t status;
|
|
/*! The index of the heater profile used */
|
|
uint8_t gas_index;
|
|
/*! Measurement index to track order */
|
|
uint8_t meas_index;
|
|
|
|
#ifndef BME680_FLOAT_POINT_COMPENSATION
|
|
/*! Temperature in degree celsius x100 */
|
|
int16_t temperature;
|
|
/*! Pressure in Pascal */
|
|
uint32_t pressure;
|
|
/*! Humidity in % relative humidity x1000 */
|
|
uint32_t humidity;
|
|
/*! Gas resistance in Ohms */
|
|
uint32_t gas_resistance;
|
|
#else
|
|
/*! Temperature in degree celsius */
|
|
float temperature;
|
|
/*! Pressure in Pascal */
|
|
float pressure;
|
|
/*! Humidity in % relative humidity x1000 */
|
|
float humidity;
|
|
/*! Gas resistance in Ohms */
|
|
float gas_resistance;
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
/*!
|
|
* @brief Structure to hold the Calibration data
|
|
*/
|
|
struct bme680_calib_data {
|
|
/*! Variable to store calibrated humidity data */
|
|
uint16_t par_h1;
|
|
/*! Variable to store calibrated humidity data */
|
|
uint16_t par_h2;
|
|
/*! Variable to store calibrated humidity data */
|
|
int8_t par_h3;
|
|
/*! Variable to store calibrated humidity data */
|
|
int8_t par_h4;
|
|
/*! Variable to store calibrated humidity data */
|
|
int8_t par_h5;
|
|
/*! Variable to store calibrated humidity data */
|
|
uint8_t par_h6;
|
|
/*! Variable to store calibrated humidity data */
|
|
int8_t par_h7;
|
|
/*! Variable to store calibrated gas data */
|
|
int8_t par_gh1;
|
|
/*! Variable to store calibrated gas data */
|
|
int16_t par_gh2;
|
|
/*! Variable to store calibrated gas data */
|
|
int8_t par_gh3;
|
|
/*! Variable to store calibrated temperature data */
|
|
uint16_t par_t1;
|
|
/*! Variable to store calibrated temperature data */
|
|
int16_t par_t2;
|
|
/*! Variable to store calibrated temperature data */
|
|
int8_t par_t3;
|
|
/*! Variable to store calibrated pressure data */
|
|
uint16_t par_p1;
|
|
/*! Variable to store calibrated pressure data */
|
|
int16_t par_p2;
|
|
/*! Variable to store calibrated pressure data */
|
|
int8_t par_p3;
|
|
/*! Variable to store calibrated pressure data */
|
|
int16_t par_p4;
|
|
/*! Variable to store calibrated pressure data */
|
|
int16_t par_p5;
|
|
/*! Variable to store calibrated pressure data */
|
|
int8_t par_p6;
|
|
/*! Variable to store calibrated pressure data */
|
|
int8_t par_p7;
|
|
/*! Variable to store calibrated pressure data */
|
|
int16_t par_p8;
|
|
/*! Variable to store calibrated pressure data */
|
|
int16_t par_p9;
|
|
/*! Variable to store calibrated pressure data */
|
|
uint8_t par_p10;
|
|
|
|
#ifndef BME680_FLOAT_POINT_COMPENSATION
|
|
/*! Variable to store t_fine size */
|
|
int32_t t_fine;
|
|
#else
|
|
/*! Variable to store t_fine size */
|
|
float t_fine;
|
|
#endif
|
|
/*! Variable to store heater resistance range */
|
|
uint8_t res_heat_range;
|
|
/*! Variable to store heater resistance value */
|
|
int8_t res_heat_val;
|
|
/*! Variable to store error range */
|
|
int8_t range_sw_err;
|
|
};
|
|
|
|
/*!
|
|
* @brief BME680 sensor settings structure which comprises of ODR,
|
|
* over-sampling and filter settings.
|
|
*/
|
|
struct bme680_tph_sett {
|
|
/*! Humidity oversampling */
|
|
uint8_t os_hum;
|
|
/*! Temperature oversampling */
|
|
uint8_t os_temp;
|
|
/*! Pressure oversampling */
|
|
uint8_t os_pres;
|
|
/*! Filter coefficient */
|
|
uint8_t filter;
|
|
};
|
|
|
|
/*!
|
|
* @brief BME680 gas sensor which comprises of gas settings
|
|
* and status parameters
|
|
*/
|
|
struct bme680_gas_sett {
|
|
/*! Variable to store nb conversion */
|
|
uint8_t nb_conv;
|
|
/*! Variable to store heater control */
|
|
uint8_t heatr_ctrl;
|
|
/*! Run gas enable value */
|
|
uint8_t run_gas;
|
|
/*! Heater temperature value */
|
|
uint16_t heatr_temp;
|
|
/*! Duration profile value */
|
|
uint16_t heatr_dur;
|
|
};
|
|
|
|
/*!
|
|
* @brief BME680 device structure
|
|
*/
|
|
struct bme680_dev {
|
|
/*! Chip Id */
|
|
uint8_t chip_id;
|
|
/*! Device Id */
|
|
uint8_t dev_id;
|
|
/*! SPI/I2C interface */
|
|
enum bme680_intf intf;
|
|
/*! Memory page used */
|
|
uint8_t mem_page;
|
|
/*! Ambient temperature in Degree C */
|
|
int8_t amb_temp;
|
|
/*! Sensor calibration data */
|
|
struct bme680_calib_data calib;
|
|
/*! Sensor settings */
|
|
struct bme680_tph_sett tph_sett;
|
|
/*! Gas Sensor settings */
|
|
struct bme680_gas_sett gas_sett;
|
|
/*! Sensor power modes */
|
|
uint8_t power_mode;
|
|
/*! New sensor fields */
|
|
uint8_t new_fields;
|
|
/*! Store the info messages */
|
|
uint8_t info_msg;
|
|
/*! Bus read function pointer */
|
|
bme680_com_fptr_t read;
|
|
/*! Bus write function pointer */
|
|
bme680_com_fptr_t write;
|
|
/*! delay function pointer */
|
|
bme680_delay_fptr_t delay_ms;
|
|
/*! Communication function result */
|
|
int8_t com_rslt;
|
|
};
|
|
|
|
|
|
|
|
#endif /* BME680_DEFS_H_ */
|
|
/** @}*/
|
|
/** @}*/
|