62 lines
2.1 KiB
C
62 lines
2.1 KiB
C
// clang-format off
|
|
// upload_speed 921600
|
|
// board m5stack-core-esp32
|
|
|
|
#ifndef _M5CORE_H
|
|
#define _M5CORE_H
|
|
|
|
#include <stdint.h>
|
|
|
|
#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module
|
|
#define LORA_SCK SCK
|
|
#define LORA_CS SS
|
|
#define LORA_MISO MISO
|
|
#define LORA_MOSI MOSI
|
|
#define LORA_RST GPIO_NUM_26
|
|
#define LORA_IRQ GPIO_NUM_36
|
|
#define LORA_IO1 GPIO_NUM_34 // must be wired by you on PCB!
|
|
#define LORA_IO2 LMIC_UNUSED_PIN
|
|
|
|
// enable only if you want to store a local paxcount table on the device
|
|
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
|
|
// Pins for SD-card
|
|
#define SDCARD_CS GPIO_NUM_4
|
|
#define SDCARD_MOSI MOSI
|
|
#define SDCARD_MISO MISO
|
|
#define SDCARD_SCLK SCK
|
|
|
|
#define CFG_sx1276_radio 1 // select LoRa chip
|
|
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
|
|
|
#define HAS_LED NOT_A_PIN // no on board LED (?)
|
|
#define HAS_BUTTON (39) // on board button A
|
|
|
|
// power management settings
|
|
#define HAS_IP5306 1 // has IP5306 chip
|
|
#define PMU_CHG_CURRENT 2 // battery charge current
|
|
// possible values: 0:200mA, 1:400mA, *2:500mA, 3:600mA
|
|
#define PMU_CHG_CUTOFF 0 // battery charge cutoff
|
|
// possible values: *0:4.2V, 1:4.3V, 2:4.35V, 3:4.4V
|
|
|
|
// Optional GPS Module settings
|
|
//#define HAS_GPS 1 // use GPS
|
|
//#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO M8N RX,TX
|
|
//#define GPS_INT GPIO_NUM_36 // 30ns accurary timepulse, to be external wired on pcb: shorten R12!
|
|
|
|
// Display Settings
|
|
#define HAS_DISPLAY 2 // TFT-LCD
|
|
//#define MY_DISPLAY_FLIP 1 // use if display is rotated
|
|
#define MY_DISPLAY_WIDTH 320
|
|
#define MY_DISPLAY_HEIGHT 240
|
|
#define TFT_MOSI MOSI // SPI
|
|
#define TFT_MISO MISO // SPI
|
|
#define TFT_SCLK SCK // SPI
|
|
#define TFT_CS GPIO_NUM_14 // Chip select control
|
|
#define TFT_DC GPIO_NUM_27 // Data Command control
|
|
#define TFT_RST GPIO_NUM_33 // Reset
|
|
#define TFT_BL GPIO_NUM_32 // LED back-light
|
|
#define TFT_FREQUENCY 40000000
|
|
#define TFT_TYPE LCD_ILI9341, FLAGS_NONE, TFT_FREQUENCY, TFT_CS, TFT_DC, TFT_RST, TFT_BL, TFT_MISO, TFT_MOSI, TFT_SCLK
|
|
|
|
#endif
|