DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
79d931bf50
ESP32-PaxCounter/src/main.cpp
Verkehrsrot 79d931bf50 DBtimesync (experimental)
2019-03-06 23:21:46 +01:00

444 lines
14 KiB
C++
Raw Blame History

/*
//////////////////////// ESP32-Paxcounter \\\\\\\\\\\\\\\\\\\\\\\\\\
Copyright 2018 Oliver Brandmueller <ob@sysadm.in>
Copyright 2018 Klaus Wilting <verkehrsrot@arcor.de>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
NOTICE:
Parts of the source files in this repository are made available under different
licenses. Refer to LICENSE.txt file in repository for more details.
//////////////////////// ESP32-Paxcounter \\\\\\\\\\\\\\\\\\\\\\\\\\
// Tasks and timers:
Task Core Prio Purpose
-------------------------------------------------------------------------------
ledloop 0 3 blinks LEDs
spiloop 0 2 reads/writes data on spi interface
IDLE 0 0 ESP32 arduino scheduler -> runs wifi sniffer
clockloop 1 4 generates realtime telegrams for external clock
looptask 1 1 arduino core -> runs the LMIC LoRa stack
irqhandler 1 1 executes tasks triggered by timer irq
gpsloop 1 2 reads data from GPS via serial or i2c
bmeloop 1 1 reads data from BME sensor via i2c
timesync_ans 1 0 temporary task for receiving time sync requests
timesync_req 1 0 temporary task for sending time sync requests
IDLE 1 0 ESP32 arduino scheduler -> runs wifi channel rotator
Low priority numbers denote low priority tasks.
Tasks using i2c bus all must have same priority, because using mutex semaphore
(irqhandler, bmeloop)
// ESP32 hardware timers
-------------------------------------------------------------------------------
0 displayIRQ -> display refresh -> 40ms (DISPLAYREFRESH_MS in
paxcounter.conf) 1 ppsIRQ -> pps clock irq -> 1sec 2 unused 3 unused
// Interrupt routines
-------------------------------------------------------------------------------
fired by hardware
DisplayIRQ -> esp32 timer 0 -> irqhandler.cpp
CLOCKIRQ -> esp32 timer 1 -> timekeeper.cpp
ButtonIRQ -> external gpio -> irqhandler.cpp
fired by software (Ticker.h)
TIMESYNC_IRQ -> timeSync() -> timerkeeper.cpp
CYLCIC_IRQ -> housekeeping() -> cyclic.cpp
SENDCYCLE_IRQ -> sendcycle() -> senddata.cpp
// External RTC timer (if present)
-------------------------------------------------------------------------------
triggers pps 1 sec impulse
*/
// Basic Config
#include "main.h"
configData_t cfg; // struct holds current device configuration
char display_line6[16], display_line7[16]; // display buffers
uint8_t volatile channel = 0; // channel rotation counter
uint16_t volatile macs_total = 0, macs_wifi = 0, macs_ble = 0,
batt_voltage = 0; // globals for display
hw_timer_t *ppsIRQ = NULL, *displayIRQ = NULL;
TaskHandle_t irqHandlerTask, ClockTask;
SemaphoreHandle_t I2Caccess, TimePulse;
bool volatile TimePulseTick = false;
time_t userUTCTime = 0;
timesource_t timeSource = _unsynced;
// container holding unique MAC address hashes with Memory Alloctor using PSRAM,
// if present
std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
// initialize payload encoder
PayloadConvert payload(PAYLOAD_BUFFER_SIZE);
// set Time Zone for user setting from paxcounter.conf
TimeChangeRule myDST = DAYLIGHT_TIME;
TimeChangeRule mySTD = STANDARD_TIME;
Timezone myTZ(myDST, mySTD);
// local Tag for logging
static const char TAG[] = __FILE__;
void setup() {
// disable the default wifi logging
esp_log_level_set("wifi", ESP_LOG_NONE);
char features[100] = "";
// create some semaphores for syncing / mutexing tasks
I2Caccess = xSemaphoreCreateMutex(); // for access management of i2c bus
if (I2Caccess)
xSemaphoreGive(I2Caccess); // Flag the i2c bus available for use
TimePulse = xSemaphoreCreateBinary(); // as signal that shows time pulse flip
// disable brownout detection
#ifdef DISABLE_BROWNOUT
// register with brownout is at address DR_REG_RTCCNTL_BASE + 0xd4
(*((uint32_t volatile *)ETS_UNCACHED_ADDR((DR_REG_RTCCNTL_BASE + 0xd4)))) = 0;
#endif
// setup debug output or silence device
#ifdef VERBOSE
Serial.begin(115200);
esp_log_level_set("*", ESP_LOG_VERBOSE);
#else
// mute logs completely by redirecting them to silence function
esp_log_level_set("*", ESP_LOG_NONE);
esp_log_set_vprintf(redirect_log);
#endif
ESP_LOGI(TAG, "Starting %s v%s", PRODUCTNAME, PROGVERSION);
// print chip information on startup if in verbose mode
#ifdef VERBOSE
esp_chip_info_t chip_info;
esp_chip_info(&chip_info);
ESP_LOGI(TAG,
"This is ESP32 chip with %d CPU cores, WiFi%s%s, silicon revision "
"%d, %dMB %s Flash",
chip_info.cores, (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "",
(chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : "",
chip_info.revision, spi_flash_get_chip_size() / (1024 * 1024),
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded"
: "external");
ESP_LOGI(TAG, "Internal Total heap %d, internal Free Heap %d",
ESP.getHeapSize(), ESP.getFreeHeap());
#ifdef BOARD_HAS_PSRAM
ESP_LOGI(TAG, "SPIRam Total heap %d, SPIRam Free Heap %d", ESP.getPsramSize(),
ESP.getFreePsram());
#endif
ESP_LOGI(TAG, "ChipRevision %d, Cpu Freq %d, SDK Version %s",
ESP.getChipRevision(), ESP.getCpuFreqMHz(), ESP.getSdkVersion());
ESP_LOGI(TAG, "Flash Size %d, Flash Speed %d", ESP.getFlashChipSize(),
ESP.getFlashChipSpeed());
ESP_LOGI(TAG, "Wifi/BT software coexist version %s", esp_coex_version_get());
#ifdef HAS_LORA
ESP_LOGI(TAG, "IBM LMIC version %d.%d.%d", LMIC_VERSION_MAJOR,
LMIC_VERSION_MINOR, LMIC_VERSION_BUILD);
ESP_LOGI(TAG, "Arduino LMIC version %d.%d.%d.%d",
ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION),
ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION),
ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION),
ARDUINO_LMIC_VERSION_GET_LOCAL(ARDUINO_LMIC_VERSION));
#endif
#ifdef HAS_GPS
ESP_LOGI(TAG, "TinyGPS+ version %s", TinyGPSPlus::libraryVersion());
#endif
#endif // verbose
// read (and initialize on first run) runtime settings from NVRAM
loadConfig(); // includes initialize if necessary
#ifdef BOARD_HAS_PSRAM
assert(psramFound());
ESP_LOGI(TAG, "PSRAM found and initialized");
strcat_P(features, " PSRAM");
#endif
// set low power mode to off
#ifdef HAS_LOWPOWER_SWITCH
pinMode(HAS_LED, OUTPUT);
digitalWrite(HAS_LOWPOWER_SWITCH, HIGH);
strcat_P(features, " LPWR");
#endif
// initialize leds
#if (HAS_LED != NOT_A_PIN)
pinMode(HAS_LED, OUTPUT);
strcat_P(features, " LED");
// switch on power LED if we have 2 LEDs, else use it for status
#ifdef HAS_RGB_LED
switch_LED(LED_ON);
strcat_P(features, " RGB");
rgb_set_color(COLOR_PINK);
#endif
#endif
#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
// start led loop
ESP_LOGI(TAG, "Starting LED Controller...");
xTaskCreatePinnedToCore(ledLoop, // task function
"ledloop", // name of task
1024, // stack size of task
(void *)1, // parameter of the task
3, // priority of the task
&ledLoopTask, // task handle
0); // CPU core
#endif
// initialize wifi antenna
#ifdef HAS_ANTENNA_SWITCH
strcat_P(features, " ANT");
antenna_init();
antenna_select(cfg.wifiant);
#endif
// initialize battery status
#ifdef HAS_BATTERY_PROBE
strcat_P(features, " BATT");
calibrate_voltage();
batt_voltage = read_voltage();
#endif
#ifdef USE_OTA
strcat_P(features, " OTA");
// reboot to firmware update mode if ota trigger switch is set
if (cfg.runmode == 1) {
cfg.runmode = 0;
saveConfig();
start_ota_update();
}
#endif
// start BLE scan callback if BLE function is enabled in NVRAM configuration
// or switch off bluetooth, if not compiled
#ifdef BLECOUNTER
strcat_P(features, " BLE");
if (cfg.blescan) {
ESP_LOGI(TAG, "Starting Bluetooth...");
start_BLEscan();
} else
btStop();
#else
// remove bluetooth stack to gain more free memory
ESP_ERROR_CHECK(esp_bluedroid_disable());
ESP_ERROR_CHECK(esp_bluedroid_deinit());
btStop();
ESP_ERROR_CHECK(esp_bt_controller_deinit());
ESP_ERROR_CHECK(esp_bt_mem_release(ESP_BT_MODE_BTDM));
ESP_ERROR_CHECK(esp_coex_preference_set((
esp_coex_prefer_t)ESP_COEX_PREFER_WIFI)); // configure Wifi/BT coexist lib
#endif
// initialize button
#ifdef HAS_BUTTON
strcat_P(features, " BTN_");
#ifdef BUTTON_PULLUP
strcat_P(features, "PU");
// install button interrupt (pullup mode)
pinMode(HAS_BUTTON, INPUT_PULLUP);
#else
strcat_P(features, "PD");
// install button interrupt (pulldown mode)
pinMode(HAS_BUTTON, INPUT_PULLDOWN);
#endif // BUTTON_PULLUP
#endif // HAS_BUTTON
// initialize gps
#ifdef HAS_GPS
strcat_P(features, " GPS");
if (gps_init()) {
ESP_LOGI(TAG, "Starting GPS Feed...");
xTaskCreatePinnedToCore(gps_loop, // task function
"gpsloop", // name of task
2048, // stack size of task
(void *)1, // parameter of the task
2, // priority of the task
&GpsTask, // task handle
1); // CPU core
}
#endif
// initialize sensors
#ifdef HAS_SENSORS
strcat_P(features, " SENS");
sensor_init();
#endif
// initialize LoRa
#ifdef HAS_LORA
strcat_P(features, " LORA");
assert(lora_stack_init() == ESP_OK);
#endif
// initialize SPI
#ifdef HAS_SPI
strcat_P(features, " SPI");
assert(spi_init() == ESP_OK);
#endif
#ifdef VENDORFILTER
strcat_P(features, " OUIFLT");
#endif
// initialize display
#ifdef HAS_DISPLAY
strcat_P(features, " OLED");
DisplayState = cfg.screenon;
init_display(PRODUCTNAME, PROGVERSION); // note: blocking call
#endif
// show payload encoder
#if PAYLOAD_ENCODER == 1
strcat_P(features, " PLAIN");
#elif PAYLOAD_ENCODER == 2
strcat_P(features, " PACKED");
#elif PAYLOAD_ENCODER == 3
strcat_P(features, " LPPDYN");
#elif PAYLOAD_ENCODER == 4
strcat_P(features, " LPPPKD");
#endif
// initialize RTC
#ifdef HAS_RTC
strcat_P(features, " RTC");
assert(rtc_init());
#endif
#if defined HAS_DCF77
strcat_P(features, " DCF77");
#endif
#if defined HAS_IF482
strcat_P(features, " IF482");
#endif
// show compiled features
ESP_LOGI(TAG, "Features:%s", features);
#ifdef HAS_LORA
// output LoRaWAN keys to console
#ifdef VERBOSE
showLoraKeys();
#endif
#endif
// start wifi in monitor mode and start channel rotation timer
ESP_LOGI(TAG, "Starting Wifi...");
wifi_sniffer_init();
// initialize salt value using esp_random() called by random() in
// arduino-esp32 core. Note: do this *after* wifi has started, since
// function gets it's seed from RF noise
get_salt(); // get new 16bit for salting hashes
// start state machine
ESP_LOGI(TAG, "Starting Interrupt Handler...");
xTaskCreatePinnedToCore(irqHandler, // task function
"irqhandler", // name of task
4096, // stack size of task
(void *)1, // parameter of the task
1, // priority of the task
&irqHandlerTask, // task handle
1); // CPU core
// initialize bme
#ifdef HAS_BME
strcat_P(features, " BME");
if (bme_init()) {
ESP_LOGI(TAG, "Starting Bluetooth sniffer...");
xTaskCreatePinnedToCore(bme_loop, // task function
"bmeloop", // name of task
2048, // stack size of task
(void *)1, // parameter of the task
1, // priority of the task
&BmeTask, // task handle
1); // CPU core
}
#endif
// starting timers and interrupts
assert(irqHandlerTask != NULL); // has interrupt handler task started?
ESP_LOGI(TAG, "Starting Timers...");
// display interrupt
#ifdef HAS_DISPLAY
// https://techtutorialsx.com/2017/10/07/esp32-arduino-timer-interrupts/
// prescaler 80 -> divides 80 MHz CPU freq to 1 MHz, timer 0, count up
displayIRQ = timerBegin(0, 80, true);
timerAttachInterrupt(displayIRQ, &DisplayIRQ, true);
timerAlarmWrite(displayIRQ, DISPLAYREFRESH_MS * 1000, true);
timerAlarmEnable(displayIRQ);
#endif
// cyclic function interrupts
sendcycler.attach(SENDCYCLE * 2, sendcycle);
housekeeper.attach(HOMECYCLE, housekeeping);
// button interrupt
#ifdef HAS_BUTTON
#ifdef BUTTON_PULLUP
attachInterrupt(digitalPinToInterrupt(HAS_BUTTON), ButtonIRQ, RISING);
#else
attachInterrupt(digitalPinToInterrupt(HAS_BUTTON), ButtonIRQ, FALLING);
#endif
#endif // HAS_BUTTON
#ifdef TIME_SYNC_INTERVAL
// start pps timepulse
ESP_LOGI(TAG, "Starting Timekeeper...");
assert(timepulse_init()); // setup timepulse
timepulse_start();
timeSync(); // init systime
timesyncer.attach(TIME_SYNC_INTERVAL * 60, timeSync);
#endif
#if defined HAS_IF482 || defined HAS_DCF77
#ifndef TIME_SYNC_INTERVAL
#error for clock controller function TIME_SNYC_INTERVAL must be defined in paxcounter.conf
#endif
ESP_LOGI(TAG, "Starting Clock Controller...");
clock_init();
#endif
} // setup()
void loop() {
while (1) {
#ifdef HAS_LORA
os_runloop_once(); // execute lmic scheduled jobs and events
#endif
delay(2); // yield to CPU
}
vTaskDelete(NULL); // shoud never be reached
}
Reference in New Issue View Git Blame Copy Permalink