275 lines
9.2 KiB
C++
275 lines
9.2 KiB
C++
/*******************************************************************************
|
|
* Copyright (c) 2015 Thomas Telkamp and Matthijs Kooijman
|
|
* Copyright (c) 2018 Terry Moore, MCCI
|
|
*
|
|
* Permission is hereby granted, free of charge, to anyone
|
|
* obtaining a copy of this document and accompanying files,
|
|
* to do whatever they want with them without any restriction,
|
|
* including, but not limited to, copying, modification and redistribution.
|
|
* NO WARRANTY OF ANY KIND IS PROVIDED.
|
|
*
|
|
* This example sends a valid LoRaWAN packet with payload "Hello,
|
|
* world!", using frequency and encryption settings matching those of
|
|
* the The Things Network. It's pre-configured for the Adafruit
|
|
* Feather M0 LoRa.
|
|
*
|
|
* This uses OTAA (Over-the-air activation), where where a DevEUI and
|
|
* application key is configured, which are used in an over-the-air
|
|
* activation procedure where a DevAddr and session keys are
|
|
* assigned/generated for use with all further communication.
|
|
*
|
|
* Note: LoRaWAN per sub-band duty-cycle limitation is enforced (1% in
|
|
* g1, 0.1% in g2), but not the TTN fair usage policy (which is probably
|
|
* violated by this sketch when left running for longer)!
|
|
|
|
* To use this sketch, first register your application and device with
|
|
* the things network, to set or generate an AppEUI, DevEUI and AppKey.
|
|
* Multiple devices can use the same AppEUI, but each device has its own
|
|
* DevEUI and AppKey.
|
|
*
|
|
* Do not forget to define the radio type correctly in
|
|
* arduino-lmic/project_config/lmic_project_config.h or from your BOARDS.txt.
|
|
*
|
|
*******************************************************************************/
|
|
|
|
#include <lmic.h>
|
|
#include <hal/hal.h>
|
|
#include <SPI.h>
|
|
|
|
//
|
|
// For normal use, we require that you edit the sketch to replace FILLMEIN
|
|
// with values assigned by the TTN console. However, for regression tests,
|
|
// we want to be able to compile these scripts. The regression tests define
|
|
// COMPILE_REGRESSION_TEST, and in that case we define FILLMEIN to a non-
|
|
// working but innocuous value.
|
|
//
|
|
#ifdef COMPILE_REGRESSION_TEST
|
|
# define FILLMEIN 0
|
|
#else
|
|
# warning "You must replace the values marked FILLMEIN with real values from the TTN control panel!"
|
|
# define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
|
|
#endif
|
|
|
|
// This EUI must be in little-endian format, so least-significant-byte
|
|
// first. When copying an EUI from ttnctl output, this means to reverse
|
|
// the bytes. For TTN issued EUIs the last bytes should be 0xD5, 0xB3,
|
|
// 0x70.
|
|
static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
|
|
void os_getArtEui (u1_t* buf) { memcpy_P(buf, APPEUI, 8);}
|
|
|
|
// This should also be in little endian format, see above.
|
|
static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
|
|
void os_getDevEui (u1_t* buf) { memcpy_P(buf, DEVEUI, 8);}
|
|
|
|
// This key should be in big endian format (or, since it is not really a
|
|
// number but a block of memory, endianness does not really apply). In
|
|
// practice, a key taken from the TTN console can be copied as-is.
|
|
static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
|
|
void os_getDevKey (u1_t* buf) { memcpy_P(buf, APPKEY, 16);}
|
|
|
|
static uint8_t mydata[] = "Hello, world!";
|
|
static osjob_t sendjob;
|
|
|
|
// Schedule TX every this many seconds (might become longer due to duty
|
|
// cycle limitations).
|
|
const unsigned TX_INTERVAL = 60;
|
|
|
|
// Pin mapping
|
|
#if defined(ARDUINO_SAMD_FEATHER_M0)
|
|
// Pin mapping for Adafruit Feather M0 LoRa, etc.
|
|
const lmic_pinmap lmic_pins = {
|
|
.nss = 8,
|
|
.rxtx = LMIC_UNUSED_PIN,
|
|
.rst = 4,
|
|
.dio = {3, 6, LMIC_UNUSED_PIN},
|
|
.rxtx_rx_active = 0,
|
|
.rssi_cal = 8, // LBT cal for the Adafruit Feather M0 LoRa, in dB
|
|
.spi_freq = 8000000,
|
|
};
|
|
#elif defined(ARDUINO_AVR_FEATHER32U4)
|
|
// Pin mapping for Adafruit Feather 32u4 LoRa, etc.
|
|
// Just like Feather M0 LoRa, but uses SPI at 1MHz; and that's only
|
|
// because MCCI doesn't have a test board; probably higher frequencies
|
|
// will work.
|
|
const lmic_pinmap lmic_pins = {
|
|
.nss = 8,
|
|
.rxtx = LMIC_UNUSED_PIN,
|
|
.rst = 4,
|
|
.dio = {3, 6, LMIC_UNUSED_PIN},
|
|
.rxtx_rx_active = 0,
|
|
.rssi_cal = 8, // LBT cal for the Adafruit Feather M0 LoRa, in dB
|
|
.spi_freq = 1000000,
|
|
};
|
|
#elif defined(ARDUINO_CATENA_4551)
|
|
// Pin mapping for Murata module / Catena 4551
|
|
const lmic_pinmap lmic_pins = {
|
|
.nss = 7,
|
|
.rxtx = 29,
|
|
.rst = 8,
|
|
.dio = { 25, // DIO0 (IRQ) is D25
|
|
26, // DIO1 is D26
|
|
27, // DIO2 is D27
|
|
},
|
|
.rxtx_rx_active = 1,
|
|
.rssi_cal = 10,
|
|
.spi_freq = 8000000 // 8MHz
|
|
};
|
|
#else
|
|
# error "Unknown target"
|
|
#endif
|
|
|
|
void onEvent (ev_t ev) {
|
|
Serial.print(os_getTime());
|
|
Serial.print(": ");
|
|
switch(ev) {
|
|
case EV_SCAN_TIMEOUT:
|
|
Serial.println(F("EV_SCAN_TIMEOUT"));
|
|
break;
|
|
case EV_BEACON_FOUND:
|
|
Serial.println(F("EV_BEACON_FOUND"));
|
|
break;
|
|
case EV_BEACON_MISSED:
|
|
Serial.println(F("EV_BEACON_MISSED"));
|
|
break;
|
|
case EV_BEACON_TRACKED:
|
|
Serial.println(F("EV_BEACON_TRACKED"));
|
|
break;
|
|
case EV_JOINING:
|
|
Serial.println(F("EV_JOINING"));
|
|
break;
|
|
case EV_JOINED:
|
|
Serial.println(F("EV_JOINED"));
|
|
{
|
|
u4_t netid = 0;
|
|
devaddr_t devaddr = 0;
|
|
u1_t nwkKey[16];
|
|
u1_t artKey[16];
|
|
LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
|
|
Serial.print("netid: ");
|
|
Serial.println(netid, DEC);
|
|
Serial.print("devaddr: ");
|
|
Serial.println(devaddr, HEX);
|
|
Serial.print("artKey: ");
|
|
for (int i=0; i<sizeof(artKey); ++i) {
|
|
if (i != 0)
|
|
Serial.print("-");
|
|
Serial.print(artKey[i], HEX);
|
|
}
|
|
Serial.println("");
|
|
Serial.print("nwkKey: ");
|
|
for (int i=0; i<sizeof(nwkKey); ++i) {
|
|
if (i != 0)
|
|
Serial.print("-");
|
|
Serial.print(nwkKey[i], HEX);
|
|
}
|
|
Serial.println("");
|
|
}
|
|
// Disable link check validation (automatically enabled
|
|
// during join, but because slow data rates change max TX
|
|
// size, we don't use it in this example.
|
|
LMIC_setLinkCheckMode(0);
|
|
break;
|
|
/*
|
|
|| This event is defined but not used in the code. No
|
|
|| point in wasting codespace on it.
|
|
||
|
|
|| case EV_RFU1:
|
|
|| Serial.println(F("EV_RFU1"));
|
|
|| break;
|
|
*/
|
|
case EV_JOIN_FAILED:
|
|
Serial.println(F("EV_JOIN_FAILED"));
|
|
break;
|
|
case EV_REJOIN_FAILED:
|
|
Serial.println(F("EV_REJOIN_FAILED"));
|
|
break;
|
|
break;
|
|
case EV_TXCOMPLETE:
|
|
Serial.println(F("EV_TXCOMPLETE (includes waiting for RX windows)"));
|
|
if (LMIC.txrxFlags & TXRX_ACK)
|
|
Serial.println(F("Received ack"));
|
|
if (LMIC.dataLen) {
|
|
Serial.println(F("Received "));
|
|
Serial.println(LMIC.dataLen);
|
|
Serial.println(F(" bytes of payload"));
|
|
}
|
|
// Schedule next transmission
|
|
os_setTimedCallback(&sendjob, os_getTime()+sec2osticks(TX_INTERVAL), do_send);
|
|
break;
|
|
case EV_LOST_TSYNC:
|
|
Serial.println(F("EV_LOST_TSYNC"));
|
|
break;
|
|
case EV_RESET:
|
|
Serial.println(F("EV_RESET"));
|
|
break;
|
|
case EV_RXCOMPLETE:
|
|
// data received in ping slot
|
|
Serial.println(F("EV_RXCOMPLETE"));
|
|
break;
|
|
case EV_LINK_DEAD:
|
|
Serial.println(F("EV_LINK_DEAD"));
|
|
break;
|
|
case EV_LINK_ALIVE:
|
|
Serial.println(F("EV_LINK_ALIVE"));
|
|
break;
|
|
/*
|
|
|| This event is defined but not used in the code. No
|
|
|| point in wasting codespace on it.
|
|
||
|
|
|| case EV_SCAN_FOUND:
|
|
|| Serial.println(F("EV_SCAN_FOUND"));
|
|
|| break;
|
|
*/
|
|
case EV_TXSTART:
|
|
Serial.println(F("EV_TXSTART"));
|
|
break;
|
|
default:
|
|
Serial.print(F("Unknown event: "));
|
|
Serial.println((unsigned) ev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void do_send(osjob_t* j){
|
|
// Check if there is not a current TX/RX job running
|
|
if (LMIC.opmode & OP_TXRXPEND) {
|
|
Serial.println(F("OP_TXRXPEND, not sending"));
|
|
} else {
|
|
// Prepare upstream data transmission at the next possible time.
|
|
LMIC_setTxData2(1, mydata, sizeof(mydata)-1, 0);
|
|
Serial.println(F("Packet queued"));
|
|
}
|
|
// Next TX is scheduled after TX_COMPLETE event.
|
|
}
|
|
|
|
void setup() {
|
|
delay(5000);
|
|
while (! Serial)
|
|
;
|
|
Serial.begin(9600);
|
|
Serial.println(F("Starting"));
|
|
|
|
#ifdef VCC_ENABLE
|
|
// For Pinoccio Scout boards
|
|
pinMode(VCC_ENABLE, OUTPUT);
|
|
digitalWrite(VCC_ENABLE, HIGH);
|
|
delay(1000);
|
|
#endif
|
|
|
|
// LMIC init
|
|
os_init();
|
|
// Reset the MAC state. Session and pending data transfers will be discarded.
|
|
LMIC_reset();
|
|
|
|
LMIC_setLinkCheckMode(0);
|
|
LMIC_setDrTxpow(DR_SF7,14);
|
|
LMIC_selectSubBand(1);
|
|
|
|
// Start job (sending automatically starts OTAA too)
|
|
do_send(&sendjob);
|
|
}
|
|
|
|
void loop() {
|
|
os_runloop_once();
|
|
}
|