113 lines
4.9 KiB
C
113 lines
4.9 KiB
C
// program version
|
|
#define PROGVERSION "1.2.8" // use max 10 chars here!
|
|
#define PROGNAME "PAXCNT"
|
|
|
|
// Verbose enables serial output
|
|
#define VERBOSE 1 // comment out to silence the device, for mute use build option
|
|
|
|
// set this to include BLE counting and vendor filter functions
|
|
#define VENDORFILTER 1 // comment out if you want to count things, not people
|
|
#define BLECOUNTER 1 // comment out if you don't want BLE count
|
|
|
|
// BLE scan time
|
|
#define BLESCANTIME 15 // [seconds]
|
|
|
|
// WiFi Sniffer cycle interval
|
|
#define SEND_SECS 120 // [seconds/2] -> 240 sec.
|
|
//#define SEND_SECS 30 // [seconds/2] -> 60 sec.
|
|
|
|
// WiFi sniffer config
|
|
#define WIFI_CHANNEL_MIN 1 // start channel number where scan begings
|
|
#define WIFI_CHANNEL_MAX 13 // total channel number to scan
|
|
#define WIFI_MY_COUNTRY "EU" // for Wifi RF settings
|
|
#define WIFI_CHANNEL_SWITCH_INTERVAL 50 // [seconds/100] -> 0,5 sec.
|
|
|
|
// Default LoRa Spreadfactor
|
|
#define LORASFDEFAULT 9 // 7 ... 12
|
|
#define MAXLORARETRY 500 // maximum count of TX retries if LoRa busy
|
|
#define RCMDPORT 2 // LoRaWAN Port on which device listenes for remote commands
|
|
|
|
// Default RGB LED luminosity (in %)
|
|
#define RGBLUMINOSITY 50 // 50%
|
|
|
|
// LMIC settings
|
|
// define hardware independent LMIC settings here, settings of standard library in /lmic/config.h will be ignored
|
|
// define hardware specifics settings in platformio.ini as build_flag for hardware environment
|
|
|
|
// Select frequency band here according to national regulations
|
|
#define CFG_eu868 1
|
|
//#define CFG_us915 1
|
|
|
|
// This is the SX1272/SX1273 radio, which is also used on the HopeRF
|
|
// RFM92 boards.
|
|
//#define CFG_sx1272_radio 1
|
|
// This is the SX1276/SX1277/SX1278/SX1279 radio, which is also used on
|
|
// the HopeRF RFM95 boards.
|
|
//#define CFG_sx1276_radio 1
|
|
|
|
// 16 μs per tick
|
|
// LMIC requires ticks to be 15.5μs - 100 μs long
|
|
#define US_PER_OSTICK_EXPONENT 4
|
|
#define US_PER_OSTICK (1 << US_PER_OSTICK_EXPONENT)
|
|
#define OSTICKS_PER_SEC (1000000 / US_PER_OSTICK)
|
|
|
|
// Set this to 1 to enable some basic debug output (using printf) about
|
|
// RF settings used during transmission and reception. Set to 2 to
|
|
// enable more verbose output. Make sure that printf is actually
|
|
// configured (e.g. on AVR it is not by default), otherwise using it can
|
|
// cause crashing.
|
|
//#define LMIC_DEBUG_LEVEL 1
|
|
|
|
// Enable this to allow using printf() to print to the given serial port
|
|
// (or any other Print object). This can be easy for debugging. The
|
|
// current implementation only works on AVR, though.
|
|
//#define LMIC_PRINTF_TO Serial
|
|
|
|
// Any runtime assertion failures are printed to this serial port (or
|
|
// any other Print object). If this is unset, any failures just silently
|
|
// halt execution.
|
|
#define LMIC_FAILURE_TO Serial
|
|
|
|
// Uncomment this to disable all code related to joining
|
|
//#define DISABLE_JOIN
|
|
// Uncomment this to disable all code related to ping
|
|
#define DISABLE_PING
|
|
// Uncomment this to disable all code related to beacon tracking.
|
|
// Requires ping to be disabled too
|
|
#define DISABLE_BEACONS
|
|
|
|
// Uncomment these to disable the corresponding MAC commands.
|
|
// Class A
|
|
//#define DISABLE_MCMD_DCAP_REQ // duty cycle cap
|
|
//#define DISABLE_MCMD_DN2P_SET // 2nd DN window param
|
|
//#define DISABLE_MCMD_SNCH_REQ // set new channel
|
|
// Class B
|
|
//#define DISABLE_MCMD_PING_SET // set ping freq, automatically disabled by DISABLE_PING
|
|
//#define DISABLE_MCMD_BCNI_ANS // next beacon start, automatical disabled by DISABLE_BEACON
|
|
|
|
// In LoRaWAN, a gateway applies I/Q inversion on TX, and nodes do the
|
|
// same on RX. This ensures that gateways can talk to nodes and vice
|
|
// versa, but gateways will not hear other gateways and nodes will not
|
|
// hear other nodes. By uncommenting this macro, this inversion is
|
|
// disabled and this node can hear other nodes. If two nodes both have
|
|
// this macro set, they can talk to each other (but they can no longer
|
|
// hear gateways). This should probably only be used when debugging
|
|
// and/or when talking to the radio directly (e.g. like in the "raw"
|
|
// example).
|
|
//#define DISABLE_INVERT_IQ_ON_RX
|
|
|
|
// This allows choosing between multiple included AES implementations.
|
|
// Make sure exactly one of these is uncommented.
|
|
//
|
|
// This selects the original AES implementation included LMIC. This
|
|
// implementation is optimized for speed on 32-bit processors using
|
|
// fairly big lookup tables, but it takes up big amounts of flash on the
|
|
// AVR architecture.
|
|
#define USE_ORIGINAL_AES
|
|
//
|
|
// This selects the AES implementation written by Ideetroon for their
|
|
// own LoRaWAN library. It also uses lookup tables, but smaller
|
|
// byte-oriented ones, making it use a lot less flash space (but it is
|
|
// also about twice as slow as the original).
|
|
// #define USE_IDEETRON_AES
|