27 lines
1.6 KiB
C
27 lines
1.6 KiB
C
// Hardware related definitions for TTGOv1 board
|
|
|
|
#define CFG_sx1276_radio 1
|
|
|
|
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
|
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
|
#define HAS_LED GPIO_NUM_2 // white LED on board
|
|
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
|
#define HAS_BUTTON GPIO_NUM_0 // button "PRG" on board
|
|
|
|
// re-define pin definitions of pins_arduino.h
|
|
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
|
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
|
|
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
|
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
|
|
|
|
// non arduino pin definitions
|
|
#define RST GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
|
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
|
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
|
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
|
|
|
// Hardware pin definitions for TTGOv1 Board with OLED SSD1306 I2C Display
|
|
#define OLED_RST GPIO_NUM_16 // ESP32 GPIO16 (Pin16) -- SD1306 Reset
|
|
#define OLED_SDA GPIO_NUM_4 // ESP32 GPIO4 (Pin4) -- SD1306 Data
|
|
#define OLED_SCL GPIO_NUM_15 // ESP32 GPIO15 (Pin15) -- SD1306 Clock
|