33 lines
1.7 KiB
C
33 lines
1.7 KiB
C
/* Hardware related definitions for TTGO V2.1 Board
|
|
// ATTENTION: check your board version!
|
|
// This settings are for boards without label on pcb, or labeled v1.5 on pcb
|
|
*/
|
|
|
|
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
|
#define HAS_SPI 1 // comment out if device shall not send data via SPI
|
|
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
|
#define HAS_LED NOT_A_PIN // no usable LED on board
|
|
|
|
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
|
//#define DISPLAY_FLIP 1 // rotated display
|
|
//#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // uses GPIO7
|
|
//#define BATT_FACTOR 2 // voltage divider 100k/100k on board
|
|
|
|
// re-define pin definitions of pins_arduino.h
|
|
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
|
|
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
|
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
|
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
|
|
|
// non arduino pin definitions
|
|
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN (old board)
|
|
//#define RST GPIO_NUM_12 // (boards labeled v1.5)
|
|
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
|
|
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1
|
|
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2
|
|
|
|
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
|
|
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
|
|
#define I2C_SDA GPIO_NUM_21 // ESP32 GPIO21 -- SD1306 D1+D2
|
|
#define I2C_SCL GPIO_NUM_22 // ESP32 GPIO22 -- SD1306 D0
|