/* configmanager persists runtime configuration using NVRAM of ESP32*/

#include "globals.h"
#include "configmanager.h"

// Local logging tag
static const char TAG[] = __FILE__;

#define PAYLOADMASK                                                            \
  ((GPS_DATA | ALARM_DATA | MEMS_DATA | COUNT_DATA | SENSOR1_DATA |            \
    SENSOR2_DATA | SENSOR3_DATA) &                                             \
   (~BATT_DATA))

// namespace for device runtime preferences
#define DEVCONFIG "paxcntcfg"

Preferences nvram;

// populate runtime config with factory settings
void defaultConfig(configData_t *myconfig) {
  char version[10];
  snprintf(version, 10, "%-10s", PROGVERSION);

  myconfig->loradr = LORADRDEFAULT; // 0-15, lora datarate, see paxcounter.conf
  myconfig->txpower = LORATXPOWDEFAULT; // 0-15, lora tx power
  myconfig->adrmode = 1;                // 0=disabled, 1=enabled
  myconfig->screensaver = 0;            // 0=disabled, 1=enabled
  myconfig->screenon = 1;               // 0=disabled, 1=enabled
  myconfig->countermode =
      COUNTERMODE;                 // 0=cyclic, 1=cumulative, 2=cyclic confirmed
  myconfig->rssilimit = 0;         // threshold for rssilimiter, negative value!
  myconfig->sendcycle = SENDCYCLE; // payload send cycle [seconds/2]
  myconfig->wifichancycle =
      WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
  myconfig->blescantime =
      BLESCANINTERVAL /
      10; // BT channel scan cycle [seconds/100], default 1 (= 10ms)
  myconfig->blescan = 1;  // 0=disabled, 1=enabled
  myconfig->wifiscan = 1; // 0=disabled, 1=enabled
  myconfig->wifiant = 0;  // 0=internal, 1=external (for LoPy/LoPy4)
  myconfig->vendorfilter = VENDORFILTER; // 0=disabled, 1=enabled
  myconfig->rgblum = RGBLUMINOSITY;      // RGB Led luminosity (0..100%)
  myconfig->monitormode = 0;             // 0=disabled, 1=enabled
  myconfig->payloadmask = PAYLOADMASK;   // all payload switched on
  memcpy(myconfig->version, version, 10); // Firmware version [exactly 10 chars]
#ifdef HAS_BME680
  // initial BSEC state for BME680 sensor
  myconfig->bsecstate[BSEC_MAX_STATE_BLOB_SIZE] = {0};
#endif
}

// save current configuration from RAM to NVRAM
void saveConfig(bool erase) {
  ESP_LOGI(TAG, "Storing settings in NVRAM");

  nvram.begin(DEVCONFIG, false);

  if (erase) {
    ESP_LOGI(TAG, "Resetting NVRAM to factory settings");
    nvram.clear();
    defaultConfig(&cfg);
  }

  // Copy device runtime config cfg to byte array
  const size_t cfgLen = sizeof(configData_t);
  char buffer[cfgLen];
  memcpy(buffer, &cfg, cfgLen);

  // save byte array to NVRAM
  nvram.putBytes(DEVCONFIG, buffer, cfgLen);
  nvram.end();
}

// load configuration from NVRAM into RAM and make it current
void loadConfig() {

  ESP_LOGI(TAG, "Loading runtime settings from NVS");

  if (!nvram.begin(DEVCONFIG, true)) {
    ESP_LOGI(TAG, "Initializing NVRAM");
    eraseConfig();
  } else {
    // simple check that runtime config data matches
    const size_t cfgLen = nvram.getBytesLength(DEVCONFIG);

    if (cfgLen % sizeof(configData_t)) {
      ESP_LOGW(TAG, "NVRAM settings invalid");
      eraseConfig();
    } else {

      // load device runtime config from nvram and copy it to byte array
      char *buffer = new char[cfgLen];
      nvram.getBytes(DEVCONFIG, buffer, cfgLen);
      nvram.end();

      // copy the byte array into runtime cfg struct
      memcpy(&cfg, buffer, cfgLen);
    }
  }
}

void eraseConfig(void) { saveConfig(true); }