// clang-format off // upload_speed 921600 // board m5stack-core-esp32 #ifndef _M5CORE_H #define _M5CORE_H #include #define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module #define LORA_SCK SCK #define LORA_CS SS #define LORA_MISO MISO #define LORA_MOSI MOSI #define LORA_RST GPIO_NUM_26 #define LORA_IRQ GPIO_NUM_36 #define LORA_IO1 GPIO_NUM_34 // must be wired by you on PCB! #define LORA_IO2 LMIC_UNUSED_PIN // enable only if you want to store a local paxcount table on the device #define HAS_SDCARD 1 // this board has an SD-card-reader/writer // Pins for SD-card #define SDCARD_CS GPIO_NUM_4 #define SDCARD_MOSI MOSI #define SDCARD_MISO MISO #define SDCARD_SCLK SCK #define CFG_sx1276_radio 1 // select LoRa chip #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature #define HAS_LED NOT_A_PIN // no on board LED (?) #define HAS_BUTTON (39) // on board button A // power management settings #define HAS_IP5306 1 // has IP5306 chip #define PMU_CHG_CURRENT 2 // battery charge current // possible values: 0:200mA, 1:400mA, *2:500mA, 3:600mA #define PMU_CHG_CUTOFF 0 // battery charge cutoff // possible values: *0:4.2V, 1:4.3V, 2:4.35V, 3:4.4V // Optional GPS Module settings //#define HAS_GPS 1 // use GPS //#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO M8N RX,TX //#define GPS_INT GPIO_NUM_36 // 30ns accurary timepulse, to be external wired on pcb: shorten R12! // Display Settings #define HAS_DISPLAY 2 // TFT-LCD //#define MY_DISPLAY_FLIP 1 // use if display is rotated #define MY_DISPLAY_WIDTH 320 #define MY_DISPLAY_HEIGHT 240 #define TFT_MOSI MOSI // SPI #define TFT_MISO MISO // SPI #define TFT_SCLK SCK // SPI #define TFT_CS GPIO_NUM_14 // Chip select control #define TFT_DC GPIO_NUM_27 // Data Command control #define TFT_RST GPIO_NUM_33 // Reset #define TFT_BL GPIO_NUM_32 // LED back-light #define TFT_FREQUENCY 40000000 #define TFT_TYPE LCD_ILI9341, FLAGS_NONE, TFT_FREQUENCY, TFT_CS, TFT_DC, TFT_RST, TFT_BL, TFT_MISO, TFT_MOSI, TFT_SCLK #endif