/* configmanager persists runtime configuration using NVRAM of ESP32*/

#include "globals.h"
#include <nvs.h>
#include <nvs_flash.h>

// Local logging tag
static const char TAG[] = "flash";

nvs_handle my_handle;
esp_err_t err;

// populate cfg vars with factory settings
void defaultConfig() {
  cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora sf, see pacounter.conf
  cfg.txpower = 15;           // 2-15, lora tx power
  cfg.adrmode = 1;            // 0=disabled, 1=enabled
  cfg.screensaver = 0;        // 0=disabled, 1=enabled
  cfg.screenon = 1;           // 0=disabled, 1=enabled
  cfg.countermode = 0;        // 0=cyclic, 1=cumulative, 2=cyclic confirmed
  cfg.rssilimit = 0;          // threshold for rssilimiter, negative value!
  cfg.sendcycle = SEND_SECS;  // payload send cycle [seconds/2]
  cfg.wifichancycle =
      WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
  cfg.blescantime =
      BLESCANINTERVAL /
      10;          // BT channel scan cycle [seconds/100], default 1 (= 10ms)
  cfg.blescan = 0; // 0=disabled, 1=enabled
  cfg.wifiant = 0; // 0=internal, 1=external (for LoPy/LoPy4)
  cfg.vendorfilter = 1;       // 0=disabled, 1=enabled
  cfg.rgblum = RGBLUMINOSITY; // RGB Led luminosity (0..100%)
  cfg.monitormode = 0;        // 0=disabled, 1=enabled
  cfg.runmode = 0;            // 0=normal, 1=update
  cfg.payloadmask = 0xFF;     // all payload switched on
  cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1] = {
      0}; // init BSEC state for BME680 sensor

  strncpy(cfg.version, PROGVERSION, sizeof(cfg.version) - 1);
}

void open_storage() {
  err = nvs_flash_init();
  if (err == ESP_ERR_NVS_NO_FREE_PAGES) {
    // NVS partition was truncated and needs to be erased
    // Retry nvs_flash_init
    ESP_ERROR_CHECK(nvs_flash_erase());
    err = nvs_flash_init();
  }
  ESP_ERROR_CHECK(err);

  // Open
  ESP_LOGI(TAG, "Opening NVS");
  err = nvs_open("config", NVS_READWRITE, &my_handle);
  if (err != ESP_OK)
    ESP_LOGI(TAG, "Error (%d) opening NVS handle", err);
  else
    ESP_LOGI(TAG, "Done");
}

// erase all keys and values in NVRAM
void eraseConfig() {
  ESP_LOGI(TAG, "Clearing settings in NVS");
  open_storage();
  if (err == ESP_OK) {
    nvs_erase_all(my_handle);
    nvs_commit(my_handle);
    nvs_close(my_handle);
    ESP_LOGI(TAG, "Done");
  } else {
    ESP_LOGW(TAG, "NVS erase failed");
  }
}

// save current configuration from RAM to NVRAM
void saveConfig() {
  ESP_LOGI(TAG, "Storing settings in NVS");
  open_storage();
  if (err == ESP_OK) {
    int8_t flash8 = 0;
    int16_t flash16 = 0;
    size_t required_size;
    char storedversion[10];
    char bsecstate_buffer[BSEC_MAX_STATE_BLOB_SIZE + 1];

    if (nvs_get_str(my_handle, "bsecstate", bsecstate_buffer, &required_size) !=
            ESP_OK ||
        strcmp(bsecstate_buffer, cfg.bsecstate) != 0)
      nvs_set_str(my_handle, "bsecstate", cfg.bsecstate);

    if (nvs_get_str(my_handle, "version", storedversion, &required_size) !=
            ESP_OK ||
        strcmp(storedversion, cfg.version) != 0)
      nvs_set_str(my_handle, "version", cfg.version);

    if (nvs_get_i8(my_handle, "lorasf", &flash8) != ESP_OK ||
        flash8 != cfg.lorasf)
      nvs_set_i8(my_handle, "lorasf", cfg.lorasf);

    if (nvs_get_i8(my_handle, "txpower", &flash8) != ESP_OK ||
        flash8 != cfg.txpower)
      nvs_set_i8(my_handle, "txpower", cfg.txpower);

    if (nvs_get_i8(my_handle, "adrmode", &flash8) != ESP_OK ||
        flash8 != cfg.adrmode)
      nvs_set_i8(my_handle, "adrmode", cfg.adrmode);

    if (nvs_get_i8(my_handle, "screensaver", &flash8) != ESP_OK ||
        flash8 != cfg.screensaver)
      nvs_set_i8(my_handle, "screensaver", cfg.screensaver);

    if (nvs_get_i8(my_handle, "screenon", &flash8) != ESP_OK ||
        flash8 != cfg.screenon)
      nvs_set_i8(my_handle, "screenon", cfg.screenon);

    if (nvs_get_i8(my_handle, "countermode", &flash8) != ESP_OK ||
        flash8 != cfg.countermode)
      nvs_set_i8(my_handle, "countermode", cfg.countermode);

    if (nvs_get_i8(my_handle, "sendcycle", &flash8) != ESP_OK ||
        flash8 != cfg.sendcycle)
      nvs_set_i8(my_handle, "sendcycle", cfg.sendcycle);

    if (nvs_get_i8(my_handle, "wifichancycle", &flash8) != ESP_OK ||
        flash8 != cfg.wifichancycle)
      nvs_set_i8(my_handle, "wifichancycle", cfg.wifichancycle);

    if (nvs_get_i8(my_handle, "blescantime", &flash8) != ESP_OK ||
        flash8 != cfg.blescantime)
      nvs_set_i8(my_handle, "blescantime", cfg.blescantime);

    if (nvs_get_i8(my_handle, "blescanmode", &flash8) != ESP_OK ||
        flash8 != cfg.blescan)
      nvs_set_i8(my_handle, "blescanmode", cfg.blescan);

    if (nvs_get_i8(my_handle, "wifiant", &flash8) != ESP_OK ||
        flash8 != cfg.wifiant)
      nvs_set_i8(my_handle, "wifiant", cfg.wifiant);

    if (nvs_get_i8(my_handle, "vendorfilter", &flash8) != ESP_OK ||
        flash8 != cfg.vendorfilter)
      nvs_set_i8(my_handle, "vendorfilter", cfg.vendorfilter);

    if (nvs_get_i8(my_handle, "rgblum", &flash8) != ESP_OK ||
        flash8 != cfg.rgblum)
      nvs_set_i8(my_handle, "rgblum", cfg.rgblum);

    if (nvs_get_i8(my_handle, "payloadmask", &flash8) != ESP_OK ||
        flash8 != cfg.payloadmask)
      nvs_set_i8(my_handle, "payloadmask", cfg.payloadmask);

    if (nvs_get_i8(my_handle, "monitormode", &flash8) != ESP_OK ||
        flash8 != cfg.monitormode)
      nvs_set_i8(my_handle, "monitormode", cfg.monitormode);

    if (nvs_get_i8(my_handle, "runmode", &flash8) != ESP_OK ||
        flash8 != cfg.runmode)
      nvs_set_i8(my_handle, "runmode", cfg.runmode);

    if (nvs_get_i16(my_handle, "rssilimit", &flash16) != ESP_OK ||
        flash16 != cfg.rssilimit)
      nvs_set_i16(my_handle, "rssilimit", cfg.rssilimit);

    err = nvs_commit(my_handle);
    nvs_close(my_handle);
    if (err == ESP_OK) {
      ESP_LOGI(TAG, "Done");
    } else {
      ESP_LOGW(TAG, "NVS config write failed");
    }
  } else {
    ESP_LOGW(TAG, "Error (%d) opening NVS handle", err);
  }
}

// set and save cfg.version
void migrateVersion() {
  sprintf(cfg.version, "%s", PROGVERSION);
  ESP_LOGI(TAG, "version set to %s", cfg.version);
  saveConfig();
}

// load configuration from NVRAM into RAM and make it current
void loadConfig() {
  defaultConfig(); // start with factory settings
  ESP_LOGI(TAG, "Reading settings from NVS");
  open_storage();
  if (err != ESP_OK) {
    ESP_LOGW(TAG, "Error (%d) opening NVS handle, storing defaults", err);
    saveConfig();
  } // saves factory settings to NVRAM
  else {
    int8_t flash8 = 0;
    int16_t flash16 = 0;
    size_t required_size;

    // check if configuration stored in NVRAM matches PROGVERSION
    if (nvs_get_str(my_handle, "version", NULL, &required_size) == ESP_OK) {
      nvs_get_str(my_handle, "version", cfg.version, &required_size);
      ESP_LOGI(TAG, "NVRAM settings version = %s", cfg.version);
      if (strcmp(cfg.version, PROGVERSION)) {
        ESP_LOGI(TAG, "migrating NVRAM settings to new version %s",
                 PROGVERSION);
        nvs_close(my_handle);
        migrateVersion();
      }
    } else {
      ESP_LOGI(TAG, "new version %s, deleting NVRAM settings", PROGVERSION);
      nvs_close(my_handle);
      eraseConfig();
      migrateVersion();
    }

    // populate pre set defaults with current values from NVRAM

    if (nvs_get_str(my_handle, "bsecstate", NULL, &required_size) == ESP_OK) {
      nvs_get_str(my_handle, "bsecstate", cfg.bsecstate, &required_size);
      ESP_LOGI(TAG, "bsecstate = %d",
               (int)(cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1]));
    }

    if (nvs_get_i8(my_handle, "lorasf", &flash8) == ESP_OK) {
      cfg.lorasf = flash8;
      ESP_LOGI(TAG, "lorasf = %d", flash8);
    } else {
      ESP_LOGI(TAG, "lorasf set to default %d", cfg.lorasf);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "txpower", &flash8) == ESP_OK) {
      cfg.txpower = flash8;
      ESP_LOGI(TAG, "txpower = %d", flash8);
    } else {
      ESP_LOGI(TAG, "txpower set to default %d", cfg.txpower);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "adrmode", &flash8) == ESP_OK) {
      cfg.adrmode = flash8;
      ESP_LOGI(TAG, "adrmode = %d", flash8);
    } else {
      ESP_LOGI(TAG, "adrmode set to default %d", cfg.adrmode);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "screensaver", &flash8) == ESP_OK) {
      cfg.screensaver = flash8;
      ESP_LOGI(TAG, "screensaver = %d", flash8);
    } else {
      ESP_LOGI(TAG, "screensaver set to default %d", cfg.screensaver);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "screenon", &flash8) == ESP_OK) {
      cfg.screenon = flash8;
      ESP_LOGI(TAG, "screenon = %d", flash8);
    } else {
      ESP_LOGI(TAG, "screenon set to default %d", cfg.screenon);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "countermode", &flash8) == ESP_OK) {
      cfg.countermode = flash8;
      ESP_LOGI(TAG, "countermode = %d", flash8);
    } else {
      ESP_LOGI(TAG, "countermode set to default %d", cfg.countermode);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "sendcycle", &flash8) == ESP_OK) {
      cfg.sendcycle = flash8;
      ESP_LOGI(TAG, "sendcycle = %d", flash8);
    } else {
      ESP_LOGI(TAG, "Payload send cycle set to default %d", cfg.sendcycle);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "wifichancycle", &flash8) == ESP_OK) {
      cfg.wifichancycle = flash8;
      ESP_LOGI(TAG, "wifichancycle = %d", flash8);
    } else {
      ESP_LOGI(TAG, "WIFI channel cycle set to default %d", cfg.wifichancycle);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "wifiant", &flash8) == ESP_OK) {
      cfg.wifiant = flash8;
      ESP_LOGI(TAG, "wifiantenna = %d", flash8);
    } else {
      ESP_LOGI(TAG, "WIFI antenna switch set to default %d", cfg.wifiant);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "vendorfilter", &flash8) == ESP_OK) {
      cfg.vendorfilter = flash8;
      ESP_LOGI(TAG, "vendorfilter = %d", flash8);
    } else {
      ESP_LOGI(TAG, "Vendorfilter mode set to default %d", cfg.vendorfilter);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "rgblum", &flash8) == ESP_OK) {
      cfg.rgblum = flash8;
      ESP_LOGI(TAG, "rgbluminosity = %d", flash8);
    } else {
      ESP_LOGI(TAG, "RGB luminosity set to default %d", cfg.rgblum);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "blescantime", &flash8) == ESP_OK) {
      cfg.blescantime = flash8;
      ESP_LOGI(TAG, "blescantime = %d", flash8);
    } else {
      ESP_LOGI(TAG, "BLEscantime set to default %d", cfg.blescantime);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "blescanmode", &flash8) == ESP_OK) {
      cfg.blescan = flash8;
      ESP_LOGI(TAG, "BLEscanmode = %d", flash8);
    } else {
      ESP_LOGI(TAG, "BLEscanmode set to default %d", cfg.blescan);
      saveConfig();
    }

    if (nvs_get_i16(my_handle, "rssilimit", &flash16) == ESP_OK) {
      cfg.rssilimit = flash16;
      ESP_LOGI(TAG, "rssilimit = %d", flash16);
    } else {
      ESP_LOGI(TAG, "rssilimit set to default %d", cfg.rssilimit);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "payloadmask", &flash8) == ESP_OK) {
      cfg.payloadmask = flash8;
      ESP_LOGI(TAG, "payloadmask = %u", flash8);
    } else {
      ESP_LOGI(TAG, "payloadmask set to default %u", cfg.payloadmask);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "monitormode", &flash8) == ESP_OK) {
      cfg.monitormode = flash8;
      ESP_LOGI(TAG, "Monitor mode = %d", flash8);
    } else {
      ESP_LOGI(TAG, "Monitor mode set to default %d", cfg.monitormode);
      saveConfig();
    }

    if (nvs_get_i8(my_handle, "runmode", &flash8) == ESP_OK) {
      cfg.runmode = flash8;
      ESP_LOGI(TAG, "Run mode = %d", flash8);
    } else {
      ESP_LOGI(TAG, "Run mode set to default %d", cfg.runmode);
      saveConfig();
    }

    nvs_close(my_handle);
    ESP_LOGI(TAG, "Done");
  }
} // loadConfig()