// clang-format off // upload_speed 1500000 // board esp32dev #ifndef _TTGOTDISPLAY_H #define _TTGOTDISPLAY_H #include #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature #define HAS_DISPLAY 2 // TFT-LCD, support work in progess, not ready yet #define MY_DISPLAY_FLIP 1 // use if display is rotated #define HAS_LED NOT_A_PIN // no on board LED (?) #define HAS_BUTTON (35) // on board button A // power management settings #define BAT_MEASURE_ADC ADC1_GPIO34_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_6 #define BAT_VOLTAGE_DIVIDER 2.605f // voltage divider // Display Settings #define MY_DISPLAY_WIDTH 135 #define MY_DISPLAY_HEIGHT 240 #define MY_DISPLAY_INVERT 1 // setting for TTGO T-display #define USER_SETUP_LOADED 1 #define ST7789_DRIVER 1 #define CGRAM_OFFSET #define TFT_MOSI GPIO_NUM_19 // SPI #define TFT_SCLK GPIO_NUM_18 // SPI #define TFT_CS GPIO_NUM_5 // Chip select control #define TFT_DC GPIO_NUM_16 // Data Command control #define TFT_RST GPIO_NUM_23 // Reset #define TFT_BL GPIO_NUM_4 // LED back-light #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-. #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts #define SMOOTH_FONT #define SPI_FREQUENCY 40000000 #define SPI_READ_FREQUENCY 6000000 #endif