#ifndef _GLOBALS_H #define _GLOBALS_H // The mother of all embedded development... #include // Time functions #include "microTime.h" #include #include #include // std::set for unified array functions #include #include #include #include "mallocator.h" #include // sniffing types #define MAC_SNIFF_WIFI 0 #define MAC_SNIFF_BLE 1 // bits in payloadmask for filtering payload data #define GPS_DATA (0x01) #define ALARM_DATA (0x02) #define MEMS_DATA (0x04) #define COUNT_DATA (0x08) #define SENSOR1_DATA (0x10) #define SENSOR2_DATA (0x20) #define SENSOR3_DATA (0x40) #define BATT_DATA (0x80) // bits in configmask for device runmode control #define GPS_MODE (0x01) #define ALARM_MODE (0x02) #define BEACON_MODE (0x04) #define UPDATE_MODE (0x08) #define FILTER_MODE (0x10) #define ANTENNA_MODE (0x20) #define BLE_MODE (0x40) #define SCREEN_MODE (0x80) // length of display buffer for lmic event messages #define LMIC_EVENTMSG_LEN 17 // I2C bus access control #define I2C_MUTEX_LOCK() \ (xSemaphoreTake(I2Caccess, pdMS_TO_TICKS(DISPLAYREFRESH_MS)) == pdTRUE) #define I2C_MUTEX_UNLOCK() (xSemaphoreGive(I2Caccess)) enum sendprio_t { prio_low, prio_normal, prio_high }; enum timesource_t { _gps, _rtc, _lora, _unsynced }; enum runmode_t { RUNMODE_POWERCYCLE = 0, RUNMODE_NORMAL, RUNMODE_WAKEUP, RUNMODE_UPDATE }; // Struct holding devices's runtime configuration // using packed to avoid compiler padding, because struct will be memcpy'd to byte array typedef struct __attribute__((packed)) { uint8_t loradr; // 0-15, lora datarate uint8_t txpower; // 2-15, lora tx power uint8_t adrmode; // 0=disabled, 1=enabled uint8_t screensaver; // 0=disabled, 1=enabled uint8_t screenon; // 0=disabled, 1=enabled uint8_t countermode; // 0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed int16_t rssilimit; // threshold for rssilimiter, negative value! uint8_t sendcycle; // payload send cycle [seconds/2] uint8_t wifichancycle; // wifi channel switch cycle [seconds/100] uint8_t blescantime; // BLE scan cycle duration [seconds] uint8_t blescan; // 0=disabled, 1=enabled uint8_t wifiscan; // 0=disabled, 1=enabled uint8_t wifiant; // 0=internal, 1=external (for LoPy/LoPy4) uint8_t vendorfilter; // 0=disabled, 1=enabled uint8_t rgblum; // RGB Led luminosity (0..100%) uint8_t monitormode; // 0=disabled, 1=enabled uint8_t runmode; // 0=normal, 1=update uint8_t payloadmask; // bitswitches for payload data char version[10]; // Firmware version #ifdef HAS_BME680 uint8_t bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1]; // BSEC state for BME680 sensor #endif } configData_t; // Struct holding payload for data send queue typedef struct { uint8_t MessageSize; uint8_t MessagePort; sendprio_t MessagePrio; uint8_t Message[PAYLOAD_BUFFER_SIZE]; } MessageBuffer_t; typedef struct { int32_t latitude; int32_t longitude; uint8_t satellites; uint16_t hdop; int16_t altitude; } gpsStatus_t; typedef struct { float iaq; // IAQ signal uint8_t iaq_accuracy; // accuracy of IAQ signal float temperature; // temperature signal float humidity; // humidity signal float pressure; // pressure signal float raw_temperature; // raw temperature signal float raw_humidity; // raw humidity signal float gas; // raw gas sensor signal } bmeStatus_t; typedef struct { float pm10; float pm25; } sdsStatus_t; extern std::set, Mallocator> macs; extern std::array::iterator it; extern std::array beacons; extern configData_t cfg; // current device configuration extern char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer extern uint8_t volatile channel; // wifi channel rotation counter extern uint8_t batt_level; // display value extern uint16_t volatile macs_wifi, macs_ble; // display values extern bool volatile TimePulseTick; // 1sec pps flag set by GPS or RTC extern timesource_t timeSource; extern hw_timer_t *displayIRQ, *matrixDisplayIRQ, *ppsIRQ; extern SemaphoreHandle_t I2Caccess; extern TaskHandle_t irqHandlerTask, ClockTask; extern TimerHandle_t WifiChanTimer; extern Timezone myTZ; extern RTC_DATA_ATTR runmode_t RTC_runmode; #endif