DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'upstream/master' into av/ttgo-t-wristband

Browse Source
This commit is contained in:
Antonio Vanegas 2020-12-01 01:09:42 +01:00
commit f794edaa0d
8 changed files with 95 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
README.md
View File

@ -48,6 +48,7 @@ LoLin32lite + [LoraNode32-Lite shield](https://github.com/hallard/LoLin32-Lite-L
- Pyom: WiPy
- WeMos: LoLin32, LoLin32 Lite, WeMos D32, [Wemos32 Oled](https://www.instructables.com/id/ESP32-With-Integrated-OLED-WEMOSLolin-Getting-Star/)
- Crowdsupply: [TinyPICO](https://www.crowdsupply.com/unexpected-maker/tinypico)
- TTGO: [T-Display](https://www.aliexpress.com/item/33048962331.html)
- Generic ESP32
Depending on board hardware following features are supported:

BIN
img/Paxcounter-ttgo-tdisplay.jpg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 292 KiB

58
include/bmesensor.h
View File

@ -21,43 +21,29 @@ extern Ticker bmecycler;
extern bmeStatus_t
bme_status; // Make struct for storing gps data globally available
// --- Bosch BSEC v1.4.7.4 library configuration ---
// 3,3V supply voltage; 3s max time between sensor_control calls; 4 days
// --- Bosch BSEC library configuration ---
// We use 3,3V supply voltage; 3s max time between sensor_control calls; 4 days
// calibration. Change this const if not applicable for your application (see
// BME680 datasheet)
// Note: 3s max time not exceed BMECYCLE frequency set in paxcounter.conf!
const uint8_t bsec_config_iaq[454] = {
4, 7, 4, 1, 61, 0, 0, 0, 0, 0, 0, 0, 174, 1, 0,
0, 48, 0, 1, 0, 0, 192, 168, 71, 64, 49, 119, 76, 0, 0,
225, 68, 137, 65, 0, 63, 205, 204, 204, 62, 0, 0, 64, 63, 205,
204, 204, 62, 0, 0, 0, 0, 216, 85, 0, 100, 0, 0, 0, 0,
0, 0, 0, 0, 28, 0, 2, 0, 0, 244, 1, 225, 0, 25, 0,
0, 128, 64, 0, 0, 32, 65, 144, 1, 0, 0, 112, 65, 0, 0,
0, 63, 16, 0, 3, 0, 10, 215, 163, 60, 10, 215, 35, 59, 10,
215, 35, 59, 9, 0, 5, 0, 0, 0, 0, 0, 1, 88, 0, 9,
0, 229, 208, 34, 62, 0, 0, 0, 0, 0, 0, 0, 0, 218, 27,
156, 62, 225, 11, 67, 64, 0, 0, 160, 64, 0, 0, 0, 0, 0,
0, 0, 0, 94, 75, 72, 189, 93, 254, 159, 64, 66, 62, 160, 191,
0, 0, 0, 0, 0, 0, 0, 0, 33, 31, 180, 190, 138, 176, 97,
64, 65, 241, 99, 190, 0, 0, 0, 0, 0, 0, 0, 0, 167, 121,
71, 61, 165, 189, 41, 192, 184, 30, 189, 64, 12, 0, 10, 0, 0,
0, 0, 0, 0, 0, 0, 0, 229, 0, 254, 0, 2, 1, 5, 48,
117, 100, 0, 44, 1, 112, 23, 151, 7, 132, 3, 197, 0, 92, 4,
144, 1, 64, 1, 64, 1, 144, 1, 48, 117, 48, 117, 48, 117, 48,
117, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 48, 117, 100, 0,
100, 0, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 100, 0, 48,
117, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117,
100, 0, 100, 0, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44,
1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1,
44, 1, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8,
7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7,
112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112,
23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 255, 255,
255, 255, 255, 255, 255, 255, 220, 5, 220, 5, 220, 5, 255, 255, 255,
255, 255, 255, 220, 5, 220, 5, 255, 255, 255, 255, 255, 255, 255, 255,
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
255, 255, 255, 255, 255, 255, 255, 255, 255, 44, 1, 0, 0, 0, 0,
138, 80, 0, 0};
// BME680 datasheet) Note: 3s max time must not exceed BMECYCLE frequency set in
// paxcounter.conf!
const uint8_t bsec_config_iaq[] = {
#include "config/generic_33v_3s_4d/bsec_iaq.txt"
};
/* Configure the BSEC library with information about the sensor
18v/33v = Voltage at Vdd. 1.8V or 3.3V
3s/300s = BSEC operating mode, BSEC_SAMPLE_RATE_LP or BSEC_SAMPLE_RATE_ULP
4d/28d = Operating age of the sensor in days
generic_18v_3s_4d
generic_18v_3s_28d
generic_18v_300s_4d
generic_18v_300s_28d
generic_33v_3s_4d
generic_33v_3s_28d
generic_33v_300s_4d
generic_33v_300s_28d
*/
// Helper functions declarations
int bme_init();

4
platformio_orig.ini
View File

@ -20,6 +20,7 @@ halfile = generic.h
;halfile = ttgofox.h
;halfile = ttgobeam.h
;halfile = ttgobeam10.h
;halfile = ttgotdisplay.h
;halfile = fipy.h
;halfile = lopy.h
;halfile = lopy4.h
@ -75,7 +76,8 @@ lib_deps_sensors =
adafruit/Adafruit Unified Sensor @ ^1.1.4
adafruit/Adafruit BME280 Library @ ^2.1.1
adafruit/Adafruit BMP085 Library @ ^1.1.0
boschsensortec/BSEC Software Library @ 1.5.1474
;boschsensortec/BSEC Software Library @ 1.6.1480
https://github.com/BoschSensortec/BSEC-Arduino-library.git
https://github.com/ricki-z/SDS011.git
lib_deps_basic =
bblanchon/ArduinoJson @ <6

2
src/display.cpp
View File

@ -53,7 +53,7 @@ QRCode qrcode;
#if (HAS_DISPLAY) == 1
OBDISP ssoled;
#elif (HAS_DISPLAY) == 2
TFT_eSPI tft = TFT_eSPI();
TFT_eSPI tft = TFT_eSPI(MY_DISPLAY_WIDTH, MY_DISPLAY_HEIGHT);
#else
#error Unknown display type specified in hal file
#endif

55
src/hal/ttgotdisplay.h Normal file
View File

@ -0,0 +1,55 @@
// clang-format off
// upload_speed 1500000
// board esp32dev
#ifndef _TTGOTDISPLAY_H
#define _TTGOTDISPLAY_H
#include <stdint.h>
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY 2 // TFT-LCD, support work in progess, not ready yet
#define MY_DISPLAY_FLIP 1 // use if display is rotated
#define HAS_LED NOT_A_PIN // no on board LED (?)
#define HAS_BUTTON (35) // on board button A
// power management settings
#define BAT_MEASURE_ADC ADC1_GPIO34_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_6
#define BAT_VOLTAGE_DIVIDER 2.605f // voltage divider
// Display Settings
#define MY_DISPLAY_WIDTH 135
#define MY_DISPLAY_HEIGHT 240
#define MY_DISPLAY_INVERT 1
// setting for TTGO T-display
#define USER_SETUP_LOADED 1
#define ST7789_DRIVER 1
#define CGRAM_OFFSET
#define TFT_MOSI GPIO_NUM_19 // SPI
#define TFT_SCLK GPIO_NUM_18 // SPI
#define TFT_CS GPIO_NUM_5 // Chip select control
#define TFT_DC GPIO_NUM_16 // Data Command control
#define TFT_RST GPIO_NUM_23 // Reset
#define TFT_BL GPIO_NUM_4 // LED back-light
#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 6000000
#endif

2
src/macsniff.cpp
View File

@ -134,7 +134,7 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
uint32_t *oui; // temporary buffer for vendor OUI
oui = (uint32_t *)MacBuffer.mac;
// if we find OUI on vendor filter list we don't analyze and return early
if (std::find(vendors.begin(), vendors.end(), __builtin_bswap32(*oui) >> 8) !=
if (std::find(vendors.begin(), vendors.end(), __builtin_bswap32(*oui) >> 8) ==
vendors.end())
return 0;
#endif

19
src/power.cpp
View File

@ -47,12 +47,10 @@ void AXP192_powerevent_IRQ(void) {
if (pmu.isBattTempHighIRQ())
ESP_LOGI(TAG, "Battery low temperature.");
// short press -> esp32 deep sleep mode, can be exited by pressing user button
#ifdef HAS_BUTTON
// short press -> esp32 deep sleep mode, can be exited by pressing user button
if (pmu.isPEKShortPressIRQ() && (RTC_runmode == RUNMODE_NORMAL)) {
enter_deepsleep(0, HAS_BUTTON);
}
#endif
// long press -> shutdown power, can be exited by another longpress
if (pmu.isPEKLongtPressIRQ()) {
@ -85,10 +83,12 @@ void AXP192_power(pmu_power_t powerlevel) {
pmu.setPowerOutPut(AXP192_LDO2, AXP202_OFF); // lora off
break;
default: // all rails power on
pmu.setPowerOutPut(AXP192_LDO2, AXP202_ON); // Lora on T-Beam V1.0
pmu.setPowerOutPut(AXP192_LDO3, AXP202_ON); // Gps on T-Beam V1.0
pmu.setPowerOutPut(AXP192_DCDC1, AXP202_ON); // OLED on T-Beam v1.0
default: // all rails power on
pmu.setPowerOutPut(AXP192_LDO2, AXP202_ON); // Lora on T-Beam V1.0
pmu.setPowerOutPut(AXP192_LDO3, AXP202_ON); // Gps on T-Beam V1.0
pmu.setPowerOutPut(AXP192_DCDC1, AXP202_ON); // OLED on T-Beam v1.0
pmu.setPowerOutPut(AXP192_DCDC2, AXP202_OFF); // unused on T-Beam v1.0
pmu.setPowerOutPut(AXP192_EXTEN, AXP202_OFF); // unused on T-Beam v1.0
pmu.setChgLEDMode(AXP20X_LED_LOW_LEVEL);
break;
}
@ -121,6 +121,8 @@ void AXP192_init(void) {
// configure AXP192
pmu.setDCDC1Voltage(3300); // for external OLED display
pmu.setLDO2Voltage(3300); // LORA VDD 3v3
pmu.setLDO3Voltage(3300); // GPS VDD 3v3
pmu.setTimeOutShutdown(false); // no automatic shutdown
pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE); // TS pin mode off to save power
@ -138,7 +140,8 @@ void AXP192_init(void) {
attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING);
pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ |
AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ |
AXP202_CHARGING_FINISHED_IRQ,
AXP202_CHARGING_FINISHED_IRQ | AXP202_PEK_SHORTPRESS_IRQ |
AXP202_PEK_LONGPRESS_IRQ,
1);
pmu.clearIRQ();
#endif // PMU_INT