Merge pull request #447 from cyberman54/development

v1.8.3

README.md

@@ -305,13 +305,27 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
 	0 = display off
 	1 = display on [default]
 
-0x05 set LoRa spread factor
+0x05 set LoRa datarate
 
-	7 ... 12 [default: 9]
+	0 ... 15 see LoRaWAN regional parameters for details [default: 5]
+
+	Example for EU868:
+
+	DataRate 	Radio		 			Bit/s
+	0 			LoRa: SF12 / 125 kHz 	250
+	1 			LoRa: SF11 / 125 kHz	440
+	2			LoRa: SF10 / 125 kHz	980
+	3			LoRa: SF9 / 125 kHz		1760
+	4			LoRa: SF8 / 125 kHz		3125
+	5			LoRa: SF7 / 125 kHz		5470
+	6*			LoRa: SF7 / 250 kHz		11000
+	7*			FSK: 50 kbps			50000
+
+	*) not supported by TheThingsNetwork
 
 0x06 set LoRa TXpower
 
-	2 ... 15 [default: 15]
+	0 ... 15 [default: 14]
 	
 0x07 set LoRa Adaptive Data Rate mode
 

include/globals.h

@@ -50,7 +50,7 @@ enum timesource_t { _gps, _rtc, _lora, _unsynced };
 
 // Struct holding devices's runtime configuration
 typedef struct {
-  uint8_t lorasf;      // 7-12, lora spreadfactor
+  uint8_t loradr;      // 0-15, lora datarate
   uint8_t txpower;     // 2-15, lora tx power
   uint8_t adrmode;     // 0=disabled, 1=enabled
   uint8_t screensaver; // 0=disabled, 1=enabled

include/lorawan.h

@@ -40,7 +40,6 @@ void os_getDevKey(u1_t *buf);
 void os_getArtEui(u1_t *buf);
 void os_getDevEui(u1_t *buf);
 void showLoraKeys(void);
-void switch_lora(uint8_t sf, uint8_t tx);
 void lora_send(void *pvParameters);
 void lora_enqueuedata(MessageBuffer_t *message);
 void lora_queuereset(void);
@@ -50,6 +49,9 @@ void myTxCallback(void *pUserData, int fSuccess);
 void mac_decode(const uint8_t cmd[], const uint8_t cmdlen, const mac_t table[],
                 const uint8_t tablesize);
 uint8_t getBattLevel(void);
+const char *getSfName(rps_t rps);
+const char *getBwName(rps_t rps);
+const char *getCrName(rps_t rps);
 
 #if (TIME_SYNC_LORAWAN)
 void user_request_network_time_callback(void *pVoidUserUTCTime,

platformio.ini

@@ -43,7 +43,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.8.2
+release_version = 1.8.3
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 3
@@ -73,7 +73,8 @@ lib_deps_basic =
     76@>=1.2.2 ;Timezone by Jack Christensen
     274@>=2.3.3 ;RTC by Michael Miller
     SimpleButton
-    AXP202X_Library@^1.0.0
+    ;AXP202X_Library@^1.0.0
+    https://github.com/cyberman54/AXP202X_Library.git
 lib_deps_all =
     ${common.lib_deps_basic}
     ${common.lib_deps_lora}

src/TTN/packed_decoder.js

@@ -37,7 +37,7 @@ function Decoder(bytes, port) {
 
     if (port === 3) {
         // device config data      
-        return decode(bytes, [uint8, uint8, int16, uint8, uint8, uint8, uint8, bitmap1, bitmap2, version], ['lorasf', 'txpower', 'rssilimit', 'sendcycle', 'wifichancycle', 'blescantime', 'rgblum', 'flags', 'payloadmask', 'version']);
+        return decode(bytes, [uint8, uint8, int16, uint8, uint8, uint8, uint8, bitmap1, bitmap2, version], ['loradr', 'txpower', 'rssilimit', 'sendcycle', 'wifichancycle', 'blescantime', 'rgblum', 'flags', 'payloadmask', 'version']);
     }
 
     if (port === 4) {

src/configmanager.cpp

@@ -10,12 +10,13 @@ esp_err_t err;
 
 #define PAYLOADMASK                                                            \
   ((GPS_DATA | ALARM_DATA | MEMS_DATA | COUNT_DATA | SENSOR1_DATA |            \
-   SENSOR2_DATA | SENSOR3_DATA) & ~BATT_DATA)
+    SENSOR2_DATA | SENSOR3_DATA) &                                             \
+   ~BATT_DATA)
 
 // populate cfg vars with factory settings
 void defaultConfig() {
-  cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora sf, see pacounter.conf
+  cfg.loradr = LORADRDEFAULT;     // 0-15, lora datarate, see pacounter.conf
-  cfg.txpower = 15;           // 2-15, lora tx power
+  cfg.txpower = LORATXPOWDEFAULT; // 0-15, lora tx power
   cfg.adrmode = 1;                // 0=disabled, 1=enabled
   cfg.screensaver = 0;            // 0=disabled, 1=enabled
   cfg.screenon = 1;               // 0=disabled, 1=enabled
@@ -96,9 +97,9 @@ void saveConfig() {
         strcmp(storedversion, cfg.version) != 0)
       nvs_set_str(my_handle, "version", cfg.version);
 
-    if (nvs_get_i8(my_handle, "lorasf", &flash8) != ESP_OK ||
+    if (nvs_get_i8(my_handle, "loradr", &flash8) != ESP_OK ||
-        flash8 != cfg.lorasf)
+        flash8 != cfg.loradr)
-      nvs_set_i8(my_handle, "lorasf", cfg.lorasf);
+      nvs_set_i8(my_handle, "loradr", cfg.loradr);
 
     if (nvs_get_i8(my_handle, "txpower", &flash8) != ESP_OK ||
         flash8 != cfg.txpower)
@@ -221,11 +222,11 @@ void loadConfig() {
       ESP_LOGI(TAG, "bsecstate = %d", cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE]);
     };
 
-    if (nvs_get_i8(my_handle, "lorasf", &flash8) == ESP_OK) {
+    if (nvs_get_i8(my_handle, "loradr", &flash8) == ESP_OK) {
-      cfg.lorasf = flash8;
+      cfg.loradr = flash8;
-      ESP_LOGI(TAG, "lorasf = %d", flash8);
+      ESP_LOGI(TAG, "loradr = %d", flash8);
     } else {
-      ESP_LOGI(TAG, "lorasf set to default %d", cfg.lorasf);
+      ESP_LOGI(TAG, "loradr set to default %d", cfg.loradr);
       saveConfig();
     }
 

src/cyclic.cpp

@@ -57,7 +57,7 @@ void doHousekeeping() {
 // read battery voltage into global variable
 #if (defined BAT_MEASURE_ADC || defined HAS_PMU)
   batt_voltage = read_voltage();
-  if (batt_voltage = 0xffff)
+  if (batt_voltage == 0xffff)
     ESP_LOGI(TAG, "Battery: external power");
   else
     ESP_LOGI(TAG, "Battery: %dmV", batt_voltage);

src/display.cpp

@@ -30,19 +30,6 @@ line 7: y = Text for LMIC status; ab = payload queue
 
 HAS_DISPLAY u8x8(MY_OLED_RST, MY_OLED_SCL, MY_OLED_SDA);
 
-// helper string for converting LoRa spread factor values
-#if defined(CFG_eu868)
-const char lora_datarate[] = {"1211100908077BFSNA"};
-#elif defined(CFG_us915)
-const char lora_datarate[] = {"100908078CNA121110090807"};
-#elif defined(CFG_as923)
-const char lora_datarate[] = {"1211100908077BFSNA"};
-#elif defined(CFG_au921)
-const char lora_datarate[] = {"1211100908078CNA1211109C8C7C"};
-#elif defined(CFG_in866)
-const char lora_datarate[] = {"121110090807FSNA"};
-#endif
-
 // helper arry for converting month values to text
 const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun",
                             "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
@@ -216,11 +203,9 @@ void draw_page(time_t t, uint8_t page) {
 
 #if (HAS_LORA)
     u8x8.setCursor(11, 3);
-    u8x8.printf("SF:");
     if (cfg.adrmode) // if ADR=on then display SF value inverse
       u8x8.setInverseFont(1);
-    u8x8.printf("%c%c", lora_datarate[LMIC.datarate * 2],
+    u8x8.printf("%5s", getSfName(updr2rps(LMIC.datarate)));
-                lora_datarate[LMIC.datarate * 2 + 1]);
     if (cfg.adrmode) // switch off inverse if it was turned on
       u8x8.setInverseFont(0);
 #endif // HAS_LORA

src/lorawan.cpp

@@ -234,11 +234,15 @@ void onEvent(ev_t ev) {
     sprintf(display_line6, " "); // clear previous lmic status
     // set data rate adaptation according to saved setting
     LMIC_setAdrMode(cfg.adrmode);
-    // set data rate and transmit power if we have no ADR
+    // set data rate and transmit power to defaults only if we have no ADR
     if (!cfg.adrmode)
-      switch_lora(cfg.lorasf, cfg.txpower);
+      LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
     // show current devaddr
     ESP_LOGI(TAG, "DEVaddr=%08X", LMIC.devaddr);
+    ESP_LOGI(TAG, "Radio parameters %s / %s / %s",
+             getSfName(updr2rps(LMIC.datarate)),
+             getBwName(updr2rps(LMIC.datarate)),
+             getCrName(updr2rps(LMIC.datarate)));
     break;
 
   case EV_RFU1:
@@ -321,53 +325,6 @@ void onEvent(ev_t ev) {
   }
 }
 
-// helper function to assign LoRa datarates to numeric spreadfactor values
-void switch_lora(uint8_t sf, uint8_t tx) {
-  if (tx > 20)
-    return;
-  cfg.txpower = tx;
-  switch (sf) {
-  case 7:
-    LMIC_setDrTxpow(DR_SF7, tx);
-    cfg.lorasf = sf;
-    break;
-  case 8:
-    LMIC_setDrTxpow(DR_SF8, tx);
-    cfg.lorasf = sf;
-    break;
-  case 9:
-    LMIC_setDrTxpow(DR_SF9, tx);
-    cfg.lorasf = sf;
-    break;
-  case 10:
-    LMIC_setDrTxpow(DR_SF10, tx);
-    cfg.lorasf = sf;
-    break;
-  case 11:
-#if defined(CFG_us915)
-    LMIC_setDrTxpow(DR_SF11CR, tx);
-    cfg.lorasf = sf;
-    break;
-#else
-    LMIC_setDrTxpow(DR_SF11, tx);
-    cfg.lorasf = sf;
-    break;
-#endif
-  case 12:
-#if defined(CFG_us915)
-    LMIC_setDrTxpow(DR_SF12CR, tx);
-    cfg.lorasf = sf;
-    break;
-#else
-    LMIC_setDrTxpow(DR_SF12, tx);
-    cfg.lorasf = sf;
-    break;
-#endif
-  default:
-    break;
-  }
-}
-
 // LMIC send task
 void lora_send(void *pvParameters) {
   configASSERT(((uint32_t)pvParameters) == 1); // FreeRTOS check
@@ -690,6 +647,22 @@ uint8_t getBattLevel() {
 #endif
 } // getBattLevel()
 
-//u1_t os_getBattLevel(void) { return getBattLevel(); };
+// u1_t os_getBattLevel(void) { return getBattLevel(); };
+
+const char *getSfName(rps_t rps) {
+  const char *const t[] = {"FSK",  "SF7",  "SF8",  "SF9",
+                           "SF10", "SF11", "SF12", "SFrfu"};
+  return t[getSf(rps)];
+}
+
+const char *getBwName(rps_t rps) {
+  const char *const t[] = {"BW125", "BW250", "BW500", "BWrfu"};
+  return t[getBw(rps)];
+}
+
+const char *getCrName(rps_t rps) {
+  const char *const t[] = {"CR 4/5", "CR 4/6", "CR 4/7", "CR 4/8"};
+  return t[getCr(rps)];
+}
 
 #endif // HAS_LORA

src/paxcounter.conf

@@ -1,3 +1,5 @@
+// clang-format off
+
 // ----- Paxcounter user config file ------
 //
 // --> adapt to your needs and use case <--
@@ -46,7 +48,8 @@
 #define MEM_LOW                         2048    // [Bytes] low memory threshold triggering a send cycle
 #define RETRANSMIT_RCMD                 5       // [seconds] wait time before retransmitting rcommand results
 #define PAYLOAD_BUFFER_SIZE             51      // maximum size of payload block per transmit
-#define LORASFDEFAULT                   9       // 7 ... 12 SF, according to LoRaWAN specs
+#define LORADRDEFAULT                   5       // 0 .. 15, LoRaWAN datarate, according to regional LoRaWAN specs [default = 5]
+#define LORATXPOWDEFAULT                14      // 0 .. 15, LoRaWAN TX power
 #define MAXLORARETRY                    500     // maximum count of TX retries if LoRa busy
 #define SEND_QUEUE_SIZE                 10      // maximum number of messages in payload send queue [1 = no queue]
 

src/payload.cpp

@@ -36,7 +36,7 @@ void PayloadConvert::addVoltage(uint16_t value) {
 }
 
 void PayloadConvert::addConfig(configData_t value) {
-  buffer[cursor++] = value.lorasf;
+  buffer[cursor++] = value.loradr;
   buffer[cursor++] = value.txpower;
   buffer[cursor++] = value.adrmode;
   buffer[cursor++] = value.screensaver;
@@ -157,7 +157,7 @@ void PayloadConvert::addAlarm(int8_t rssi, uint8_t msg) {
 void PayloadConvert::addVoltage(uint16_t value) { writeUint16(value); }
 
 void PayloadConvert::addConfig(configData_t value) {
-  writeUint8(value.lorasf);
+  writeUint8(value.loradr);
   writeUint8(value.txpower);
   writeUint16(value.rssilimit);
   writeUint8(value.sendcycle);

src/power.cpp

@@ -18,8 +18,7 @@ void pover_event_IRQ(void) {
     if (pmu.isVbusOverVoltageIRQ())
       ESP_LOGI(TAG, "USB voltage %.1fV too high.", pmu.getVbusVoltage());
     if (pmu.isVbusPlugInIRQ())
-      ESP_LOGI(TAG, "USB plugged, %.0fmAh @ %.1fV", pmu.getVbusCurrent(),
+      ESP_LOGI(TAG, "USB plugged.");
-               pmu.getVbusVoltage());
     if (pmu.isVbusRemoveIRQ())
       ESP_LOGI(TAG, "USB unplugged.");
 
@@ -59,16 +58,16 @@ void pover_event_IRQ(void) {
 void AXP192_power(bool on) {
 
   if (on) {
-    pmu.setPowerOutPut(AXP192_LDO2, AXP202_ON);
+    pmu.setPowerOutPut(AXP192_LDO2, AXP202_ON); // Lora on T-Beam V1.0
-    pmu.setPowerOutPut(AXP192_LDO3, AXP202_ON);
+    pmu.setPowerOutPut(AXP192_LDO3, AXP202_ON); // Gps on T-Beam V1.0
-    pmu.setPowerOutPut(AXP192_DCDC2, AXP202_ON);
-    pmu.setPowerOutPut(AXP192_EXTEN, AXP202_ON);
     pmu.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
-    pmu.setChgLEDMode(AXP20X_LED_LOW_LEVEL);
+    pmu.setPowerOutPut(AXP192_DCDC3, AXP202_ON);
+    pmu.setPowerOutPut(AXP192_EXTEN, AXP202_ON);
+    pmu.setChgLEDMode(AXP20X_LED_BLINK_1HZ);
   } else {
-    pmu.setPowerOutPut(AXP192_DCDC1, AXP202_OFF);
     pmu.setPowerOutPut(AXP192_EXTEN, AXP202_OFF);
-    pmu.setPowerOutPut(AXP192_DCDC2, AXP202_OFF);
+    pmu.setPowerOutPut(AXP192_DCDC3, AXP202_OFF);
+    pmu.setPowerOutPut(AXP192_DCDC1, AXP202_OFF);
     pmu.setPowerOutPut(AXP192_LDO3, AXP202_OFF);
     pmu.setPowerOutPut(AXP192_LDO2, AXP202_OFF);
     pmu.setChgLEDMode(AXP20X_LED_OFF);
@@ -78,16 +77,14 @@ void AXP192_power(bool on) {
 void AXP192_displaypower(void) {
   if (pmu.isBatteryConnect())
     if (pmu.isChargeing())
-      ESP_LOGI(TAG, "Battery charging %.0fmAh @ Temp %.1f°C",
+      ESP_LOGI(TAG, "Battery charging @ %.0fmAh", pmu.getBattChargeCurrent());
-               pmu.getBattChargeCurrent(), pmu.getTSTemp());
     else
-      ESP_LOGI(TAG, "Battery not charging, Temp %.1f°C", pmu.getTSTemp());
+      ESP_LOGI(TAG, "Battery not charging");
   else
     ESP_LOGI(TAG, "No Battery");
 
   if (pmu.isVBUSPlug())
-    ESP_LOGI(TAG, "USB present, %.0fmAh @ %.1fV", pmu.getVbusCurrent(),
+    ESP_LOGI(TAG, "USB present");
-             pmu.getVbusVoltage());
   else
     ESP_LOGI(TAG, "USB not present");
 }
@@ -102,10 +99,13 @@ void AXP192_init(void) {
     else {
 
       // switch power on
-      pmu.setDCDC1Voltage(3300);
+      pmu.setDCDC1Voltage(3300); // for external OLED display
       pmu.adc1Enable(AXP202_BATT_CUR_ADC1, 1);
       AXP192_power(true);
 
+      // set TS pin mode off to save power
+      pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE);
+
       // I2C access of AXP202X library currently is not mutexable
       // so we better should disable AXP interrupts... ?
 #ifdef PMU_INT
@@ -117,7 +117,7 @@ void AXP192_init(void) {
       pmu.clearIRQ();
 #endif // PMU_INT
 
-      ESP_LOGI(TAG, "AXP192 PMU initialized, chip Temp %.1f°C", pmu.getTemp());
+      ESP_LOGI(TAG, "AXP192 PMU initialized, chip temp %.1f°C", pmu.getTemp());
       AXP192_displaypower();
     }
     I2C_MUTEX_UNLOCK(); // release i2c bus access

src/rcommand.cpp

@@ -193,10 +193,22 @@ void set_monitor(uint8_t val[]) {
   cfg.monitormode = val[0] ? 1 : 0;
 }
 
-void set_lorasf(uint8_t val[]) {
+void set_loradr(uint8_t val[]) {
 #if (HAS_LORA)
-  ESP_LOGI(TAG, "Remote command: set LoRa SF to %d", val[0]);
+  if (validDR(val[0])) {
-  switch_lora(val[0], cfg.txpower);
+    cfg.loradr = val[0];
+    ESP_LOGI(TAG, "Remote command: set LoRa Datarate to %d", cfg.loradr);
+    LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
+    ESP_LOGI(TAG, "Radio parameters now %s / %s / %s",
+             getSfName(updr2rps(LMIC.datarate)),
+             getBwName(updr2rps(LMIC.datarate)),
+             getCrName(updr2rps(LMIC.datarate)));
+
+  } else
+    ESP_LOGI(
+        TAG,
+        "Remote command: set LoRa Datarate called with illegal datarate %d",
+        val[0]);
 #else
   ESP_LOGW(TAG, "Remote command: LoRa not implemented");
 #endif // HAS_LORA
@@ -247,8 +259,16 @@ void set_rgblum(uint8_t val[]) {
 
 void set_lorapower(uint8_t val[]) {
 #if (HAS_LORA)
-  ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %d", val[0]);
+  // set data rate and transmit power only if we have no ADR
-  switch_lora(cfg.lorasf, val[0]);
+  if (!cfg.adrmode) {
+    cfg.txpower = val[0] & 0x0f;
+    ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %d", cfg.txpower);
+    LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
+  } else
+    ESP_LOGI(
+        TAG,
+        "Remote command: set LoRa TXPOWER, not executed because ADR is on");
+
 #else
   ESP_LOGW(TAG, "Remote command: LoRa not implemented");
 #endif // HAS_LORA
@@ -331,7 +351,7 @@ void set_flush(uint8_t val[]) {
 static cmd_t table[] = {
     {0x01, set_rssi, 1, true},          {0x02, set_countmode, 1, true},
     {0x03, set_gps, 1, true},           {0x04, set_display, 1, true},
-    {0x05, set_lorasf, 1, true},        {0x06, set_lorapower, 1, true},
+    {0x05, set_loradr, 1, true},        {0x06, set_lorapower, 1, true},
     {0x07, set_loraadr, 1, true},       {0x08, set_screensaver, 1, true},
     {0x09, set_reset, 1, true},         {0x0a, set_sendcycle, 1, true},
     {0x0b, set_wifichancycle, 1, true}, {0x0c, set_blescantime, 1, true},