cleanups after change PMU lib

This commit is contained in:
cyberman54 2022-08-18 12:11:47 +02:00
parent c7026ee7a4
commit f43126eec2
5 changed files with 15 additions and 30 deletions

View File

@ -102,7 +102,6 @@ void dp_setup(int contrast = 0);
void dp_refresh(bool nextPage = false);
void dp_init(bool verbose = false);
void dp_shutdown(void);
void dp_message(const char *msg, int line, bool invers);
void dp_setFont(int font, int inv = 0);
void dp_dump(uint8_t *pBuffer = NULL);
void dp_contrast(uint8_t contrast);

View File

@ -55,7 +55,7 @@ void calibrate_voltage(void);
bool batt_sufficient(void);
#ifdef HAS_PMU
#include "XPowersLib.h"
#include <XPowersLib.h>
extern XPowersPMU pmu;
enum pmu_power_t { pmu_power_on, pmu_power_off, pmu_power_sleep };
void AXP192_powerevent_IRQ(void);

View File

@ -446,14 +446,6 @@ void dp_shutdown(void) {
#endif
}
// print static message on display
void dp_message(const char *msg, int line, bool invers) {
dp_setFont(MY_FONT_SMALL, invers ? 1 : 0);
dp->setCursor(0, line * 8);
dp->printf("%-16s", msg);
dp_dump();
} // dp_message
// ------------- QR code plotter -----------------
void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message) {

View File

@ -35,7 +35,6 @@ void AXP192_powerevent_IRQ(void) {
pmu.getVbusCurrent());
if (pmu.isVbusRemoveIrq())
ESP_LOGI(TAG, "USB unplugged.");
if (pmu.isBatInsertIrq())
ESP_LOGI(TAG, "Battery is connected.");
if (pmu.isBatRemoveIrq())
@ -48,17 +47,16 @@ void AXP192_powerevent_IRQ(void) {
ESP_LOGI(TAG, "Battery high temperature.");
if (pmu.isBattTempHighIrq())
ESP_LOGI(TAG, "Battery low temperature.");
#ifdef HAS_BUTTON
// short press -> esp32 deep sleep mode, can be exited by pressing user button
if (pmu.isPekeyShortPressIrq()) {
enter_deepsleep(0, HAS_BUTTON);
}
#endif
// long press -> shutdown power, can be exited by another longpress
if (pmu.isPekeyLongPressIrq()) {
// PEK button handling:
// long press -> shutdown power, must be exited by another longpress
if (pmu.isPekeyLongPressIrq())
AXP192_power(pmu_power_off); // switch off Lora, GPS, display
}
#ifdef HAS_BUTTON
// short press -> esp32 deep sleep mode, must be exited by user button
if (pmu.isPekeyShortPressIrq())
enter_deepsleep(0, HAS_BUTTON);
#endif
pmu.clearIrqStatus();
@ -69,6 +67,8 @@ void AXP192_powerevent_IRQ(void) {
void AXP192_power(pmu_power_t powerlevel) {
switch (powerlevel) {
case pmu_power_off:
pmu.setChargerLedFunction(XPOWER_CHGLED_CTRL_MANUAL);
pmu.setChargingLedFreq(XPOWERS_CHG_LED_DISABLE);
pmu.shutdown();
break;
case pmu_power_sleep:
@ -152,7 +152,7 @@ void AXP192_init(void) {
);
#endif // PMU_INT
// set charging parameterss according to user settings if we have (see power.h)
// set charging parameters according to user settings if we have (see power.h)
#ifdef PMU_CHG_CURRENT
pmu.setChargeCurrent(PMU_CHG_CURRENT);
pmu.setChargerVoltageLimit(PMU_CHG_CUTOFF);

View File

@ -105,20 +105,14 @@ void enter_deepsleep(const uint64_t wakeup_sec, gpio_num_t wakeup_gpio) {
RTC_runmode = RUNMODE_SLEEP;
int i;
// show message on display
#ifdef HAS_DISPLAY
dp_message("-GOING TO SLEEP-", 7, true);
#endif
// validate wake up pin, if we have
if (!GPIO_IS_VALID_GPIO(wakeup_gpio))
wakeup_gpio = GPIO_NUM_MAX;
// stop further enqueuing of senddata and MAC processing
// -> skipped, because shutting down bluedroid stack tends to crash
// libpax_counter_stop();
// stop further enqueuing of senddata and MAC processing
libpax_counter_stop();
// switch off any power consuming hardware
// switch off any power consuming hardware
#if (HAS_SDS011)
sds011_sleep();
#endif