DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/cyberman54/ESP32-Paxcounter

Browse Source
This commit is contained in:
Oliver Brandmueller 2018-05-09 20:31:22 +02:00
commit f164e5279b
20 changed files with 707 additions and 602 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
README.md
View File

@ -48,11 +48,13 @@ Hardware dependent settings (pinout etc.) are stored in board files in /hal dire
These results where metered with software version 1.2.97 while continuously scanning wifi and ble, no LoRa TX’ing, OLED display (if present) on, 5V USB powered.
# Building
# Preparing
Use <A HREF="https://platformio.org/">PlatformIO</A> with your preferred IDE for development and building this code.
Before compiling the code,
Before compiling the code, **create file loraconf.h in your local /src directory** using the template [loraconf.sample.h](https://github.com/cyberman54/ESP32-Paxcounter/blob/master/src/loraconf.sample.h) and populate it with your personal APPEUI und APPKEY for the LoRaWAN network. If you're using popular <A HREF="https://thethingsnetwork.org">TheThingsNetwork</A> you can copy&paste the keys from TTN console or output of ttnctl.
- **edit paxcounter.conf** and taylor settings in this file according to your needs and use case. Please take care of the duty cycle regulations of the LoRaWAN network you're going to use.
- **create file loraconf.h in your local /src directory** using the template [loraconf.sample.h](https://github.com/cyberman54/ESP32-Paxcounter/blob/master/src/loraconf.sample.h) and populate it with your personal APPEUI und APPKEY for the LoRaWAN network. If you're using popular <A HREF="https://thethingsnetwork.org">TheThingsNetwork</A> you can copy&paste the keys from TTN console or output of ttnctl.
To join the network only method OTAA is supported, not ABP. The DEVEUI for OTAA will be derived from the device's MAC adress during device startup and is shown as well on the device's display (if it has one) as on the serial console for copying it to your LoRaWAN network server settings.
@ -60,6 +62,10 @@ If your device has a fixed DEVEUI enter this in your local loraconf.h file. Duri
If your device has silicon **Unique ID** which is stored in serial EEPROM Microchip 24AA02E64 you don't need to change anything. The Unique ID will be read during startup and DEVEUI will be generated from it, overriding settings in loraconf.h.
# Building
Use <A HREF="https://platformio.org/">PlatformIO</A> with your preferred IDE for development and building this code.
# Uploading
To upload the code to your ESP32 board this needs to be switched from run to bootloader mode. Boards with USB bridge like Heltec and TTGO usually have an onboard logic which allows soft switching by the upload tool. In PlatformIO this happenes automatically.<p>
@ -150,10 +156,10 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
1 = reset MAC counter to zero
2 = reset device to factory settings
0x0A set Wifi scan cycle and payload transmit cycle
0x0A set payload send cycle
0 ... 255 duration of a wifi scan cycle in seconds/2, after this payload is sent
e.g. 120 -> 1 cycle runs for 240 seconds [default]
0 ... 255 payload send cycle in seconds/2
e.g. 120 -> payload is transmitted each 240 seconds [default]
0x0B set Wifi channel switch interval timer
@ -187,7 +193,7 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
0x80 get device configuration
device answers with it's current configuration. The configuration is a C structure declared in file [globals.h](src/globals.h#L24-L41) with the following definition:
device answers with it's current configuration. The configuration is a C structure declared in file [globals.h](src/globals.h#L27-L44) with the following definition:
byte 1: Lora SF (7..12)
byte 2: Lora TXpower (2..15)
@ -196,7 +202,7 @@ device answers with it's current configuration. The configuration is a C structu
byte 5: Display status (1=on, 0=off)
byte 6: Counter mode (0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed)
bytes 7-8: RSSI limiter threshold value (negative)
byte 9: Wifi scan cycle duration in seconds/2 (0..255)
byte 9: Payload send cycle in seconds/2 (0..255)
byte 10: Wifi channel switch interval in seconds/100 (0..255)
byte 11: BLE scan cycle duration in seconds (0..255)
byte 12: BLE scan mode (1=on, 0=0ff)

6
platformio.ini
View File

@ -31,14 +31,14 @@ build_flags =
; ---> NOTE: For production run set DEBUG_LEVEL level to NONE! <---
; otherwise device may crash in dense environments due to serial buffer overflow
;
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_NONE
; -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_INFO
; -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_NONE
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_INFO
; -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_VERBOSE
; -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
;
; override lora settings from LMiC library in lmic/config.h and use main.h instead
-D_lmic_config_h_
-include "src/main.h"
-include "src/paxcounter.conf"
[env:heltec_wifi_lora_32]
platform = espressif32

2
src/antenna.cpp
View File

@ -21,7 +21,7 @@ void antenna_init(void) {
gpio_config(&gpioconf);
}
void antenna_select (const int8_t _ant) {
void antenna_select (const uint8_t _ant) {
if (HAS_ANTENNA_SWITCH < 32) {
if (_ant == ANTENNA_EXT) {
GPIO_REG_WRITE(GPIO_OUT_W1TS_REG, 1 << HAS_ANTENNA_SWITCH);

15
src/blecsan.cpp
View File

@ -100,7 +100,7 @@ static void gap_callback_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_pa
{
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT:
{ // restart scan
status = esp_ble_gap_start_scanning(BLESCANTIME);
status = esp_ble_gap_start_scanning(cfg.blescantime);
if (status != ESP_OK)
{
ESP_LOGE(TAG, "esp_ble_gap_start_scanning: rc=%d", status);
@ -112,7 +112,7 @@ static void gap_callback_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_pa
{
if ( p->scan_rst.search_evt == ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done
{ // restart scan
status = esp_ble_gap_start_scanning (BLESCANTIME);
status = esp_ble_gap_start_scanning (cfg.blescantime);
if (status != ESP_OK)
{
ESP_LOGE(TAG, "esp_ble_gap_start_scanning: rc=%d", status);
@ -233,13 +233,17 @@ esp_err_t register_ble_functionality(void)
// Main start code running in its own Xtask
void bt_loop(void *ignore)
void bt_loop(void * pvParameters)
{
configASSERT( ( ( uint32_t ) pvParameters ) == 1 ); // FreeRTOS check
esp_err_t status;
// Initialize BT controller to allocate task and other resource.
ESP_LOGI(TAG, "Enabling Bluetooth Controller");
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
bt_cfg.controller_task_stack_size = 8192; // double BT stack size
if (esp_bt_controller_init(&bt_cfg) != ESP_OK)
{
ESP_LOGE(TAG, "Bluetooth controller initialize failed");
@ -253,6 +257,8 @@ void bt_loop(void *ignore)
goto end;
}
//esp_bt_controller_mem_release(ESP_BT_MODE_BTDM); // gives 30KB more RAM for heap
// Init and alloc the resource for bluetooth, must be prior to every bluetooth stuff
ESP_LOGI(TAG, "Init Bluetooth stack");
status = esp_bluedroid_init();
@ -280,8 +286,7 @@ void bt_loop(void *ignore)
while(1)
{
vTaskDelay(500/portTICK_PERIOD_MS);
yield();
vTaskDelay(10/portTICK_PERIOD_MS); // reset watchdog
}
end:

70
src/configmanager.cpp
View File

@ -13,19 +13,19 @@ esp_err_t err;
// defined in antenna.cpp
#ifdef HAS_ANTENNA_SWITCH
void antenna_select(const int8_t _ant);
void antenna_select(const uint8_t _ant);
#endif
// populate cfg vars with factory settings
void defaultConfig() {
cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora spreadfactor defined in main.h
cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora spreadfactor defined in paxcounter.conf
cfg.txpower = 15; // 2-15, lora tx power
cfg.adrmode = 1; // 0=disabled, 1=enabled
cfg.screensaver = 0; // 0=disabled, 1=enabled
cfg.screenon = 1; // 0=disbaled, 1=enabled
cfg.countermode = 0; // 0=cyclic, 1=cumulative, 2=cyclic confirmed
cfg.rssilimit = 0; // threshold for rssilimiter, negative value!
cfg.wifiscancycle = SEND_SECS; // wifi scan cycle [seconds/2]
cfg.sendcycle = SEND_SECS; // payload send cycle [seconds/2]
cfg.wifichancycle = WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
cfg.blescantime = BLESCANTIME; // BLE scan cycle duration [seconds]
cfg.blescan = 1; // 0=disabled, 1=enabled
@ -99,8 +99,8 @@ void saveConfig() {
if( nvs_get_i8(my_handle, "countermode", &flash8) != ESP_OK || flash8 != cfg.countermode )
nvs_set_i8(my_handle, "countermode", cfg.countermode);
if( nvs_get_i8(my_handle, "wifiscancycle", &flash8) != ESP_OK || flash8 != cfg.wifiscancycle )
nvs_set_i8(my_handle, "wifiscancycle", cfg.wifiscancycle);
if( nvs_get_i8(my_handle, "sendcycle", &flash8) != ESP_OK || flash8 != cfg.sendcycle )
nvs_set_i8(my_handle, "sendcycle", cfg.sendcycle);
if( nvs_get_i8(my_handle, "wifichancycle", &flash8) != ESP_OK || flash8 != cfg.wifichancycle )
nvs_set_i8(my_handle, "wifichancycle", cfg.wifichancycle);
@ -174,113 +174,113 @@ void loadConfig() {
// overwrite defaults with valid values from NVRAM
if( nvs_get_i8(my_handle, "lorasf", &flash8) == ESP_OK ) {
cfg.lorasf = flash8;
ESP_LOGI(TAG, "lorasf = %i", flash8);
ESP_LOGI(TAG, "lorasf = %d", flash8);
} else {
ESP_LOGI(TAG, "lorasf set to default %i", cfg.lorasf);
ESP_LOGI(TAG, "lorasf set to default %d", cfg.lorasf);
saveConfig();
}
if( nvs_get_i8(my_handle, "txpower", &flash8) == ESP_OK ) {
cfg.txpower = flash8;
ESP_LOGI(TAG, "txpower = %i", flash8);
ESP_LOGI(TAG, "txpower = %d", flash8);
} else {
ESP_LOGI(TAG, "txpower set to default %i", cfg.txpower);
ESP_LOGI(TAG, "txpower set to default %d", cfg.txpower);
saveConfig();
}
if( nvs_get_i8(my_handle, "adrmode", &flash8) == ESP_OK ) {
cfg.adrmode = flash8;
ESP_LOGI(TAG, "adrmode = %i", flash8);
ESP_LOGI(TAG, "adrmode = %d", flash8);
} else {
ESP_LOGI(TAG, "adrmode set to default %i", cfg.adrmode);
ESP_LOGI(TAG, "adrmode set to default %d", cfg.adrmode);
saveConfig();
}
if( nvs_get_i8(my_handle, "screensaver", &flash8) == ESP_OK ) {
cfg.screensaver = flash8;
ESP_LOGI(TAG, "screensaver = %i", flash8);
ESP_LOGI(TAG, "screensaver = %d", flash8);
} else {
ESP_LOGI(TAG, "screensaver set to default %i", cfg.screensaver);
ESP_LOGI(TAG, "screensaver set to default %d", cfg.screensaver);
saveConfig();
}
if( nvs_get_i8(my_handle, "screenon", &flash8) == ESP_OK ) {
cfg.screenon = flash8;
ESP_LOGI(TAG, "screenon = %i", flash8);
ESP_LOGI(TAG, "screenon = %d", flash8);
} else {
ESP_LOGI(TAG, "screenon set to default %i", cfg.screenon);
ESP_LOGI(TAG, "screenon set to default %d", cfg.screenon);
saveConfig();
}
if( nvs_get_i8(my_handle, "countermode", &flash8) == ESP_OK ) {
cfg.countermode = flash8;
ESP_LOGI(TAG, "countermode = %i", flash8);
ESP_LOGI(TAG, "countermode = %d", flash8);
} else {
ESP_LOGI(TAG, "countermode set to default %i", cfg.countermode);
ESP_LOGI(TAG, "countermode set to default %d", cfg.countermode);
saveConfig();
}
if( nvs_get_i8(my_handle, "wifiscancycle", &flash8) == ESP_OK ) {
cfg.wifiscancycle = flash8;
ESP_LOGI(TAG, "wifiscancycle = %i", flash8);
if( nvs_get_i8(my_handle, "sendcycle", &flash8) == ESP_OK ) {
cfg.sendcycle = flash8;
ESP_LOGI(TAG, "sendcycle = %d", flash8);
} else {
ESP_LOGI(TAG, "WIFI scan cycle set to default %i", cfg.wifiscancycle);
ESP_LOGI(TAG, "Payload send cycle set to default %d", cfg.sendcycle);
saveConfig();
}
if( nvs_get_i8(my_handle, "wifichancycle", &flash8) == ESP_OK ) {
cfg.wifichancycle = flash8;
ESP_LOGI(TAG, "wifichancycle = %i", flash8);
ESP_LOGI(TAG, "wifichancycle = %d", flash8);
} else {
ESP_LOGI(TAG, "WIFI channel cycle set to default %i", cfg.wifichancycle);
ESP_LOGI(TAG, "WIFI channel cycle set to default %d", cfg.wifichancycle);
saveConfig();
}
if( nvs_get_i8(my_handle, "wifiant", &flash8) == ESP_OK ) {
cfg.wifiant = flash8;
ESP_LOGI(TAG, "wifiantenna = %i", flash8);
ESP_LOGI(TAG, "wifiantenna = %d", flash8);
} else {
ESP_LOGI(TAG, "WIFI antenna switch set to default %i", cfg.wifiant);
ESP_LOGI(TAG, "WIFI antenna switch set to default %d", cfg.wifiant);
saveConfig();
}
if( nvs_get_i8(my_handle, "vendorfilter", &flash8) == ESP_OK ) {
cfg.vendorfilter = flash8;
ESP_LOGI(TAG, "vendorfilter = %i", flash8);
ESP_LOGI(TAG, "vendorfilter = %d", flash8);
} else {
ESP_LOGI(TAG, "Vendorfilter mode set to default %i", cfg.vendorfilter);
ESP_LOGI(TAG, "Vendorfilter mode set to default %d", cfg.vendorfilter);
saveConfig();
}
if( nvs_get_i8(my_handle, "rgblum", &flash8) == ESP_OK ) {
cfg.rgblum = flash8;
ESP_LOGI(TAG, "rgbluminosity = %i", flash8);
ESP_LOGI(TAG, "rgbluminosity = %d", flash8);
} else {
ESP_LOGI(TAG, "RGB luminosity set to default %i", cfg.rgblum);
ESP_LOGI(TAG, "RGB luminosity set to default %d", cfg.rgblum);
saveConfig();
}
if( nvs_get_i8(my_handle, "blescantime", &flash8) == ESP_OK ) {
cfg.blescantime = flash8;
ESP_LOGI(TAG, "blescantime = %i", flash8);
ESP_LOGI(TAG, "blescantime = %d", flash8);
} else {
ESP_LOGI(TAG, "BLEscantime set to default %i", cfg.blescantime);
ESP_LOGI(TAG, "BLEscantime set to default %d", cfg.blescantime);
saveConfig();
}
if( nvs_get_i8(my_handle, "blescanmode", &flash8) == ESP_OK ) {
cfg.blescan = flash8;
ESP_LOGI(TAG, "BLEscanmode = %i", flash8);
ESP_LOGI(TAG, "BLEscanmode = %d", flash8);
} else {
ESP_LOGI(TAG, "BLEscanmode set to default %i", cfg.blescan);
ESP_LOGI(TAG, "BLEscanmode set to default %d", cfg.blescan);
saveConfig();
}
if( nvs_get_i16(my_handle, "rssilimit", &flash16) == ESP_OK ) {
cfg.rssilimit = flash16;
ESP_LOGI(TAG, "rssilimit = %i", flash16);
ESP_LOGI(TAG, "rssilimit = %d", flash16);
} else {
ESP_LOGI(TAG, "rssilimit set to default %i", cfg.rssilimit);
ESP_LOGI(TAG, "rssilimit set to default %d", cfg.rssilimit);
saveConfig();
}

37
src/globals.h
View File

@ -6,8 +6,8 @@
#include <array>
#include <algorithm>
// OLED Display
#ifdef HAS_DISPLAY
// OLED Display
#include <U8x8lib.h>
#endif
@ -22,23 +22,24 @@
#include "rgb_led.h"
#include "macsniff.h"
#include "main.h"
// Struct holding devices's runtime configuration
typedef struct {
int8_t lorasf; // 7-12, lora spreadfactor
int8_t txpower; // 2-15, lora tx power
int8_t adrmode; // 0=disabled, 1=enabled
int8_t screensaver; // 0=disabled, 1=enabled
int8_t screenon; // 0=disabled, 1=enabled
int8_t countermode; // 0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed
uint8_t lorasf; // 7-12, lora spreadfactor
uint8_t txpower; // 2-15, lora tx power
uint8_t adrmode; // 0=disabled, 1=enabled
uint8_t screensaver; // 0=disabled, 1=enabled
uint8_t screenon; // 0=disabled, 1=enabled
uint8_t countermode; // 0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed
int16_t rssilimit; // threshold for rssilimiter, negative value!
int8_t wifiscancycle; // wifi scan cycle [seconds/2]
int8_t wifichancycle; // wifi channel switch cycle [seconds/100]
int8_t blescantime; // BLE scan cycle duration [seconds]
int8_t blescan; // 0=disabled, 1=enabled
int8_t wifiant; // 0=internal, 1=external (for LoPy/LoPy4)
int8_t vendorfilter; // 0=disabled, 1=enabled
int8_t rgblum; // RGB Led luminosity (0..100%)
uint8_t sendcycle; // payload send cycle [seconds/2]
uint8_t wifichancycle; // wifi channel switch cycle [seconds/100]
uint8_t blescantime; // BLE scan cycle duration [seconds]
uint8_t blescan; // 0=disabled, 1=enabled
uint8_t wifiant; // 0=internal, 1=external (for LoPy/LoPy4)
uint8_t vendorfilter; // 0=disabled, 1=enabled
uint8_t rgblum; // RGB Led luminosity (0..100%)
char version[10]; // Firmware version
} configData_t;
@ -48,15 +49,11 @@ extern uint64_t uptimecounter;
extern osjob_t sendjob;
extern char display_lora[], display_lmic[];
extern int countermode, screensaver, adrmode, lorasf, txpower, rlim;
extern uint16_t macs_total, macs_wifi, macs_ble; // MAC counters
extern bool joinstate;
extern std::set<uint16_t> wifis;
extern std::set<uint16_t> macs;
extern hw_timer_t * channelSwitch; // hardware timer used for wifi channel switching
#ifdef HAS_DISPLAY
extern HAS_DISPLAY u8x8;
#endif
#ifdef BLECOUNTER
extern int scanTime;
extern std::set<uint16_t> bles;
#endif

2
src/hal/heltec.h
View File

@ -17,7 +17,7 @@
#define RST 14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 32 // ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for Heltec LoRa-32 Board with OLED SSD1306 I2C Display
#define OLED_RST 16 // ESP32 GPIO16 (Pin16) -- SD1306 RST

4
src/hal/lolin32_lora.h
View File

@ -25,8 +25,8 @@
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 4 // ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 35 // ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
#define OLED_RST U8X8_PIN_NONE // Not reset pin

4
src/hal/lolin32lite_lora.h
View File

@ -24,8 +24,8 @@
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 4 // ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 35 // ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
#define OLED_RST U8X8_PIN_NONE // Not reset pin

2
src/hal/lopy.h
View File

@ -12,7 +12,7 @@
#define RST 18
#define DIO0 23 // LoRa IRQ
#define DIO1 23 // workaround
#define DIO2 23 // workaround
#define DIO2 LMIC_UNUSED_PIN // 23 workaround
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH 16 // pin for switching wifi antenna

2
src/hal/lopy4.h
View File

@ -12,7 +12,7 @@
#define RST LMIC_UNUSED_PIN
#define DIO0 23 // LoRa IRQ
#define DIO1 23 // workaround
#define DIO2 23 // workaround
#define DIO2 LMIC_UNUSED_PIN // 23 workaround
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH 21 // pin for switching wifi antenna

2
src/hal/ttgov1.h
View File

@ -18,7 +18,7 @@
#define RST 14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 32 // ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for TTGOv1 Board with OLED SSD1306 I2C Display
#define OLED_RST 16 // ESP32 GPIO16 (Pin16) -- SD1306 Reset

2
src/hal/ttgov2.h
View File

@ -19,7 +19,7 @@
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
#define DIO0 26 // ESP32 GPIO26 wired on PCB to HPD13A
#define DIO1 33 // HPDIO1 on pcb, needs to be wired external to GPIO33
#define DIO2 32 // HPDIO2 on pcb, needs to be wired external to GPIO32 (not necessary for LoRa, only FSK)
#define DIO2 LMIC_UNUSED_PIN // 32 HPDIO2 on pcb, needs to be wired external to GPIO32 (not necessary for LoRa, only FSK)
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN

66
src/lorawan.cpp
View File

@ -13,12 +13,9 @@
// Local logging Tag
static const char *TAG = "lorawan";
// function defined in main.cpp
void set_onboard_led(int state);
// functions defined in rcommand.cpp
void rcommand(int cmd, int arg);
void switch_lora(int sf, int tx);
void rcommand(uint8_t cmd, uint8_t arg);
void switch_lora(uint8_t sf, uint8_t tx);
// DevEUI generator using devices's MAC address
void gen_lora_deveui(uint8_t *pdeveui) {
@ -112,28 +109,20 @@ void printKeys(void) {
void do_send(osjob_t* j){
uint8_t mydata[4];
uint16_t data;
// Sum of unique WIFI MACs seen
data = (uint16_t) wifis.size();
mydata[0] = (data & 0xff00) >> 8;
mydata[1] = data & 0xff;
mydata[0] = (macs_wifi & 0xff00) >> 8;
mydata[1] = macs_wifi & 0xff;
#ifdef BLECOUNTER
// Sum of unique BLE MACs seen
data = (uint16_t) bles.size();
mydata[2] = (data & 0xff00) >> 8;
mydata[3] = data & 0xff;
mydata[2] = (macs_ble & 0xff00) >> 8;
mydata[3] = macs_ble & 0xff;
#else
mydata[2] = 0;
mydata[3] = 0;
#endif
// Total BLE+WIFI unique MACs seen
// TBD ?
//data = (uint16_t) macs.size();
//mydata[4] = (data & 0xff00) >> 8;
//mydata[5] = data & 0xff;
// Check if there is not a current TX/RX job running
if (LMIC.opmode & OP_TXRXPEND) {
ESP_LOGI(TAG, "OP_TXRXPEND, not sending");
@ -143,9 +132,17 @@ void do_send(osjob_t* j){
LMIC_setTxData2(1, mydata, sizeof(mydata), (cfg.countermode & 0x02));
ESP_LOGI(TAG, "Packet queued");
sprintf(display_lmic, "PACKET QUEUED");
// clear counter if not in cumulative counter mode
if (cfg.countermode != 1) {
reset_counters(); // clear macs container and reset all counters
reset_salt(); // get new salt for salting hashes
}
// Next TX is scheduled after TX_COMPLETE event.
}
}
// Schedule next transmission
os_setTimedCallback(&sendjob, os_getTime()+sec2osticks(cfg.sendcycle * 2), do_send);
} // do_send()
void onEvent (ev_t ev) {
char buff[24]="";
@ -166,8 +163,10 @@ void onEvent (ev_t ev) {
case EV_REJOIN_FAILED: strcpy_P(buff, PSTR("REJOIN FAILED")); break;
case EV_JOINED:
joinstate=true;
strcpy_P(buff, PSTR("JOINED"));
sprintf(display_lora, " "); // erase "Join Wait" message from display
// Disable link check validation (automatically enabled
// during join, but not supported by TTN at this time).
LMIC_setLinkCheckMode(0);
@ -175,26 +174,21 @@ void onEvent (ev_t ev) {
LMIC_setAdrMode(cfg.adrmode);
// Set data rate and transmit power (note: txpower seems to be ignored by the library)
switch_lora(cfg.lorasf,cfg.txpower);
joinstate=true;
// show effective LoRa parameters after join
ESP_LOGI(TAG, "ADR=%i, SF=%i, TXPOWER=%i", cfg.adrmode, cfg.lorasf, cfg.txpower);
ESP_LOGI(TAG, "ADR=%d, SF=%d, TXPOWER=%d", cfg.adrmode, cfg.lorasf, cfg.txpower);
break;
case EV_TXCOMPLETE:
ESP_LOGI(TAG, "EV_TXCOMPLETE (includes waiting for RX windows)");
if (LMIC.txrxFlags & TXRX_ACK) {
ESP_LOGI(TAG, "Received ack");
sprintf(display_lmic, "RECEIVED ACK");
} else {
sprintf(display_lmic, "TX COMPLETE");
}
strcpy_P(buff, (LMIC.txrxFlags & TXRX_ACK) ? PSTR("RECEIVED ACK") : PSTR("TX COMPLETE"));
sprintf(display_lora, ""); // erase previous LoRa message from display
if (LMIC.dataLen) {
ESP_LOGI(TAG, "Received %d bytes of payload", LMIC.dataLen);
sprintf(display_lora, "Rcvd %d bytes", LMIC.dataLen);
ESP_LOGI(TAG, "Received %d bytes of payload, RSSI %d SNR %d", LMIC.dataLen, LMIC.rssi, (signed char)LMIC.snr / 4);
// LMIC.snr = SNR twos compliment [dB] * 4
// LMIC.rssi = RSSI [dBm] (-196...+63)
sprintf(display_lmic, "RSSI %d SNR %d", LMIC.rssi, (signed char)LMIC.snr / 4 );
sprintf(display_lora, "RSSI %d SNR %d", LMIC.rssi, (signed char)LMIC.snr / 4 );
// check if payload received on command port, then call remote command interpreter
if ( (LMIC.txrxFlags & TXRX_PORT) && (LMIC.frame[LMIC.dataBeg-1] == RCMDPORT ) ) {
@ -208,6 +202,7 @@ void onEvent (ev_t ev) {
}
}
break;
default: sprintf_P(buff, PSTR("UNKNOWN EVENT %d"), ev); break;
}
@ -217,6 +212,5 @@ void onEvent (ev_t ev) {
sprintf(display_lmic, buff);
}
}
} // onEvent()

51
src/macsniff.cpp
View File

@ -13,10 +13,11 @@ static const char *TAG = "macsniff";
static wifi_country_t wifi_country = {.cc=WIFI_MY_COUNTRY, .schan=WIFI_CHANNEL_MIN, .nchan=WIFI_CHANNEL_MAX, .policy=WIFI_COUNTRY_POLICY_MANUAL};
// globals
uint16_t salt;
uint16_t salt_reset(void) {
salt = random(65536); // get new 16bit random for salting hashes
uint16_t reset_salt(void) {
salt = random(65536); // get new 16bit random for salting hashes and set global salt var
return salt;
}
@ -24,58 +25,54 @@ bool mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type) {
char buff[16]; // temporary buffer for printf
bool added = false;
uint32_t addr2int;
uint32_t vendor2int;
uint16_t hashedmac;
uint32_t addr2int, vendor2int; // temporary buffer for MAC and Vendor OUI
uint16_t hashedmac; // temporary buffer for generated hash value
// only last 3 MAC Address bytes are used for MAC Address Anonymization
// only last 3 MAC Address bytes are used for MAC address anonymization
// but since it's uint32 we take 4 bytes to avoid 1st value to be 0
addr2int = ( (uint32_t)paddr[2] ) | ( (uint32_t)paddr[3] << 8 ) | ( (uint32_t)paddr[4] << 16 ) | ( (uint32_t)paddr[5] << 24 );
#ifdef VENDORFILTER
vendor2int = ( (uint32_t)paddr[2] ) | ( (uint32_t)paddr[1] << 8 ) | ( (uint32_t)paddr[0] << 16 );
// use OUI vendor filter list only on Wifi, not on BLE
if ( (sniff_type==MAC_SNIFF_BLE) || std::find(vendors.begin(), vendors.end(), vendor2int) != vendors.end() ) {
if ( (sniff_type==MAC_SNIFF_BLE) || std::find(vendors.begin(), vendors.end(), vendor2int) != vendors.end() )
{
#endif
// salt and hash MAC, and if new unique one, store identifier in container and increment counter on display
// https://en.wikipedia.org/wiki/MAC_Address_Anonymization
addr2int += (uint32_t) salt; // add 16-bit salt to pseudo MAC
addr2int += (uint32_t)salt; // add 16-bit salt to pseudo MAC
snprintf(buff, sizeof(buff), "%08X", addr2int); // convert unsigned 32-bit salted MAC to 8 digit hex string
hashedmac = rokkit(&buff[3], 5); // hash MAC last string value, use 5 chars to fit hash in uint16_t container
auto newmac = macs.insert(hashedmac); // add hashed MAC to total container if new unique
added = newmac.second ? true:false; // true if hashed MAC is unique in container
// Insert only if it was not found on global count
// Count only if MAC was not yet seen
if (added) {
// increment counter and one blink led
if (sniff_type == MAC_SNIFF_WIFI ) {
rgb_set_color(COLOR_GREEN);
wifis.insert(hashedmac); // add hashed MAC to wifi container
macs_wifi++; // increment Wifi MACs counter
#if (HAS_LED != NOT_A_PIN) || defined (HAS_RGB_LED)
blink_LED(COLOR_GREEN, 50);
#endif
}
#ifdef BLECOUNTER
else if (sniff_type == MAC_SNIFF_BLE ) {
rgb_set_color(COLOR_MAGENTA);
bles.insert(hashedmac); // add hashed MAC to BLE container
macs_ble++; // increment BLE Macs counter
#if (HAS_LED != NOT_A_PIN) || defined (HAS_RGB_LED)
blink_LED(COLOR_MAGENTA, 50);
#endif
}
#endif
// Not sure user will have time to see the LED
// TBD do light off further in the code
rgb_set_color(COLOR_NONE);
}
ESP_LOGI(TAG, "%s RSSI %ddBi -> MAC %s -> Hash %04X -> WiFi:%d BLTH:%d %s",
// Log scan result
ESP_LOGI(TAG, "%s %s RSSI %ddBi -> MAC %s -> Hash %04X -> WiFi:%d BLTH:%d -> %d Bytes left",
added ? "new " : "known",
sniff_type==MAC_SNIFF_WIFI ? "WiFi":"BLTH",
rssi, buff, hashedmac,
(int) wifis.size(),
#ifdef BLECOUNTER
(int) bles.size(),
#else
0,
#endif
added ? "new" : "known");
rssi, buff, hashedmac, macs_wifi, macs_ble,
ESP.getFreeHeap());
#ifdef VENDORFILTER
} else {

2
src/macsniff.h
View File

@ -19,7 +19,7 @@ typedef struct {
uint8_t payload[0]; /* network data ended with 4 bytes csum (CRC32) */
} wifi_ieee80211_packet_t;
uint16_t salt_reset(void);
uint16_t reset_salt(void);
void wifi_sniffer_init(void);
void wifi_sniffer_set_channel(uint8_t channel);
void wifi_sniffer_packet_handler(void *buff, wifi_promiscuous_pkt_type_t type);

508
src/main.cpp
View File

@ -24,9 +24,6 @@ Refer to LICENSE.txt file in repository for more details.
// Basic Config
#include "globals.h"
// std::set for unified array functions
#include <set>
// Does nothing and avoid any compilation error with I2C
#include <Wire.h>
@ -35,36 +32,41 @@ Refer to LICENSE.txt file in repository for more details.
#include <lmic.h>
#include <hal/hal.h>
// ESP32 Functions
// ESP32 lib Functions
#include <esp_event_loop.h> // needed for Wifi event handler
#include <esp_spi_flash.h> // needed for reading ESP32 chip attributes
#include <esp32-hal-log.h> // needed for ESP_LOGx on arduino framework
configData_t cfg; // struct holds current device configuration
osjob_t sendjob, initjob; // LMIC
// Initialize global variables
char display_lora[16], display_lmic[16];
uint8_t channel = 0;
int macnum = 0;
uint64_t uptimecounter = 0;
bool joinstate = false;
configData_t cfg; // struct holds current device configuration
osjob_t sendjob, initjob; // LMIC jobs
uint64_t uptimecounter = 0; // timer global for uptime counter
uint8_t DisplayState = 0; // globals for state machine
uint16_t macs_total = 0, macs_wifi = 0, macs_ble = 0; // MAC counters globals for display
uint8_t channel = 0; // wifi channel rotation counter global for display
char display_lora[16], display_lmic[16]; // display buffers
led_states LEDState = LED_OFF; // LED state global for state machine
led_states previousLEDState = LED_ON; // This will force LED to be off at boot since State is OFF
unsigned long LEDBlinkStarted = 0; // When (in millis() led blink started)
uint16_t LEDBlinkDuration = 0; // How long the blink need to be
uint16_t LEDColor = COLOR_NONE; // state machine variable to set RGB LED color
bool joinstate = false; // LoRa network joined? global flag
bool blinkdone = true; // flag for state machine for blinking LED once
hw_timer_t * displaytimer = NULL; // configure hardware timer used for cyclic display refresh
hw_timer_t * channelSwitch = NULL; // configure hardware timer used for wifi channel switching
portMUX_TYPE timerMux = portMUX_INITIALIZER_UNLOCKED; // sync main loop and ISR when modifying shared variable DisplayIRQ
std::set<uint16_t> macs; // associative container holds total of unique MAC adress hashes (Wifi + BLE)
std::set<uint16_t> wifis; // associative container holds unique Wifi MAC adress hashes
#ifdef BLECOUNTER
std::set<uint16_t> bles; // associative container holds unique BLE MAC adresses hashes
int scanTime;
#endif
// this variable will be changed in the ISR, and read in main loop
static volatile bool ButtonTriggered = false;
// this variables will be changed in the ISR, and read in main loop
static volatile int ButtonPressed = 0, DisplayTimerIRQ = 0, ChannelTimerIRQ = 0;
// local Tag for logging
static const char *TAG = "paxcnt";
// Note: Log level control seems not working during runtime,
// so we need to switch loglevel by compiler build option in platformio.ini
#ifndef VERBOSE
int redirect_log(const char * fmt, va_list args) {
//do nothing
@ -72,22 +74,15 @@ int redirect_log(const char * fmt, va_list args) {
}
#endif
// defined in configmanager.cpp
void eraseConfig(void);
void saveConfig(void);
void loadConfig(void);
#ifdef HAS_LED
void set_onboard_led(int st);
#endif
void reset_counters() {
macs.clear(); // clear all macs container
macs_total = 0; // reset all counters
macs_wifi = 0;
macs_ble = 0;
}
/* begin LMIC specific parts ------------------------------------------------------------ */
// defined in lorawan.cpp
void gen_lora_deveui(uint8_t * pdeveui);
void RevBytes(unsigned char* b, size_t c);
void get_hard_deveui(uint8_t *pdeveui);
#ifdef VERBOSE
void printKeys(void);
@ -133,10 +128,6 @@ const lmic_pinmap lmic_pins = {
.dio = {DIO0, DIO1, DIO2}
};
// LMIC functions
void onEvent(ev_t ev);
void do_send(osjob_t* j);
// LoRaWAN Initjob
static void lora_init (osjob_t* j) {
// reset MAC state
@ -149,52 +140,36 @@ static void lora_init (osjob_t* j) {
// LMIC FreeRTos Task
void lorawan_loop(void * pvParameters) {
configASSERT( ( ( uint32_t ) pvParameters ) == 1 ); // FreeRTOS check
static bool led_state;
bool new_led_state;
static uint16_t lorawait = 0;
while(1) {
uint16_t color;
// execute LMIC jobs
os_runloop_once();
// All follow is Led management
// Let join at the begining of if sequence,
// is prior to send because joining state send data
if ( LMIC.opmode & (OP_JOINING | OP_REJOIN) ) {
color = COLOR_YELLOW;
// quick blink 20ms on each 1/5 second
new_led_state = ((millis() % 200) < 20) ? HIGH : LOW;
// TX data pending
} else if (LMIC.opmode & (OP_TXDATA | OP_TXRXPEND)) {
color = COLOR_BLUE;
// small blink 10ms on each 1/2sec (not when joining)
new_led_state = ((millis() % 500) < 20) ? HIGH : LOW;
// This should not happen so indicate a problem
} else if ( LMIC.opmode & (OP_TXDATA | OP_TXRXPEND | OP_JOINING | OP_REJOIN) == 0 ) {
color = COLOR_RED;
// heartbeat long blink 200ms on each 2 seconds
new_led_state = ((millis() % 2000) < 200) ? HIGH : LOW;
} else {
// led off
rgb_set_color(COLOR_NONE);
// indicate LMIC state on LEDs if present
#if (HAS_LED != NOT_A_PIN) || defined (HAS_RGB_LED)
led_loop();
#endif
/*
// check if payload is sent
while(LMIC.opmode & OP_TXRXPEND) {
if(!lorawait)
sprintf(display_lora, "LoRa wait");
lorawait++;
// in case sending really fails: reset LMIC and rejoin network
if( (lorawait % MAXLORARETRY ) == 0) {
ESP_LOGI(TAG, "Payload not sent, resetting LMIC and rejoin");
lorawait = 0;
LMIC_reset(); // Reset the MAC state. Session and pending data transfers will be discarded.
};
vTaskDelay(1000/portTICK_PERIOD_MS);
}
// led need to change state? avoid digitalWrite() for nothing
if (led_state != new_led_state) {
if (new_led_state == HIGH) {
set_onboard_led(1);
rgb_set_color(color);
} else {
set_onboard_led(0);
rgb_set_color(COLOR_NONE);
}
led_state = new_led_state;
}
vTaskDelay(10/portTICK_PERIOD_MS);
yield();
*/
vTaskDelay(10/portTICK_PERIOD_MS); // reset watchdog
}
}
@ -206,115 +181,62 @@ void lorawan_loop(void * pvParameters) {
#ifdef HAS_DISPLAY
HAS_DISPLAY u8x8(OLED_RST, OLED_SCL, OLED_SDA);
// Display Refresh IRQ
void IRAM_ATTR DisplayIRQ() {
portENTER_CRITICAL_ISR(&timerMux);
DisplayTimerIRQ++;
portEXIT_CRITICAL_ISR(&timerMux);
}
#endif
#ifdef HAS_ANTENNA_SWITCH
// defined in antenna.cpp
void antenna_init();
void antenna_select(const int8_t _ant);
void antenna_select(const uint8_t _ant);
#endif
#ifndef BLECOUNTER
bool btstop = btStop();
#endif
void set_onboard_led(int st){
#ifdef HAS_LED
switch (st) {
#ifdef LED_ACTIVE_LOW
case 1: digitalWrite(HAS_LED, LOW); break;
case 0: digitalWrite(HAS_LED, HIGH); break;
#else
case 1: digitalWrite(HAS_LED, HIGH); break;
case 0: digitalWrite(HAS_LED, LOW); break;
#endif
#ifdef HAS_BUTTON
// Button IRQ
// IRAM_ATTR necessary here, see https://github.com/espressif/arduino-esp32/issues/855
void IRAM_ATTR ButtonIRQ() {
ButtonPressed++;
}
#endif
};
#ifdef HAS_BUTTON
// Button Handling, board dependent -> perhaps to be moved to hal/<$board.h>
// IRAM_ATTR necessary here, see https://github.com/espressif/arduino-esp32/issues/855
void IRAM_ATTR isr_button_pressed(void) {
ButtonTriggered = true; }
#endif
void IRAM_ATTR ChannelSwitchIRQ() {
portENTER_CRITICAL(&timerMux);
ChannelTimerIRQ++;
portEXIT_CRITICAL(&timerMux);
}
/* end hardware specific parts -------------------------------------------------------- */
/* begin wifi specific parts ---------------------------------------------------------- */
// defined in wifisniffer.cpp
void wifi_sniffer_init(void);
void wifi_sniffer_set_channel(uint8_t channel);
void wifi_sniffer_packet_handler(void *buff, wifi_promiscuous_pkt_type_t type);
// defined in blescan.cpp
void bt_loop(void *ignore);
// Sniffer Task
void sniffer_loop(void * pvParameters) {
configASSERT( ( ( uint32_t ) pvParameters ) == 1 ); // FreeRTOS check
channel=0;
char buff[16];
int nloop=0, lorawait=0;
while (true) {
while (1) {
nloop++; // actual number of wifi loops, controls cycle when data is sent
vTaskDelay(cfg.wifichancycle*10 / portTICK_PERIOD_MS);
yield();
channel = (channel % WIFI_CHANNEL_MAX) + 1; // rotates variable channel 1..WIFI_CHANNEL_MAX
if (ChannelTimerIRQ) {
portENTER_CRITICAL(&timerMux);
ChannelTimerIRQ--;
portEXIT_CRITICAL(&timerMux);
// rotates variable channel 1..WIFI_CHANNEL_MAX
channel = (channel % WIFI_CHANNEL_MAX) + 1;
wifi_sniffer_set_channel(channel);
ESP_LOGD(TAG, "Wifi set channel %d", channel);
// duration of one wifi scan loop reached? then send data and begin new scan cycle
if ( nloop >= ( (100 / cfg.wifichancycle) * (cfg.wifiscancycle * 2)) +1 ) {
nloop=0; channel=0; // reset wifi scan + channel loop counter
do_send(&sendjob); // Prepare and execute LoRaWAN data upload
vTaskDelay(500/portTICK_PERIOD_MS);
yield();
// clear counter if not in cumulative counter mode
if (cfg.countermode != 1) {
macs.clear(); // clear all macs container
wifis.clear(); // clear Wifi macs couner
#ifdef BLECOUNTER
bles.clear(); // clear BLE macs counter
#endif
salt_reset(); // get new salt for salting hashes
vTaskDelay(10/portTICK_PERIOD_MS); // reset watchdog
}
// check if payload is sent
lorawait = 0;
while(LMIC.opmode & OP_TXRXPEND) {
if(!lorawait)
sprintf(display_lora, "LoRa wait");
lorawait++;
// in case sending really fails: reset and rejoin network
if( (lorawait % MAXLORARETRY ) == 0) {
ESP_LOGI(TAG, "Payload not sent, trying reset and rejoin");
esp_restart();
};
vTaskDelay(1000/portTICK_PERIOD_MS);
yield();
}
sprintf(display_lora, " "); // clear LoRa wait message fromd display
/*
// TBD: need to check if long 2000ms pause causes stack problems while scanning continues
if (cfg.screenon && cfg.screensaver) {
vTaskDelay(2000/portTICK_PERIOD_MS); // pause for displaying results
yield();
u8x8.setPowerSave(1 && cfg.screensaver); // set display off if screensaver is enabled
}
*/
} // end of send data cycle
} // end of infinite wifi channel rotation loop
}
@ -330,8 +252,9 @@ uint64_t uptime() {
}
#ifdef HAS_DISPLAY
// Print a key on display
void DisplayKey(const uint8_t * key, uint8_t len, bool lsb) {
// Print a key on display
void DisplayKey(const uint8_t * key, uint8_t len, bool lsb) {
uint8_t start=lsb?len:0;
uint8_t end = lsb?0:len;
const uint8_t * p ;
@ -340,9 +263,9 @@ void DisplayKey(const uint8_t * key, uint8_t len, bool lsb) {
u8x8.printf("%02X", *p);
}
u8x8.printf("\n");
}
}
void init_display(const char *Productname, const char *Version) {
void init_display(const char *Productname, const char *Version) {
uint8_t buf[32];
u8x8.begin();
u8x8.setFont(u8x8_font_chroma48medium8_r);
@ -389,12 +312,155 @@ void init_display(const char *Productname, const char *Version) {
DisplayKey(buf, 8, true);
delay(5000);
u8x8.clear();
}
}
void refreshDisplay() {
// update counter display (lines 0-4)
char buff[16];
snprintf(buff, sizeof(buff), "PAX:%-4d", (int) macs.size()); // convert 16-bit MAC counter to decimal counter value
u8x8.draw2x2String(0, 0, buff); // display number on unique macs total Wifi + BLE
u8x8.setCursor(0,4);
u8x8.printf("WIFI:%-4d", macs_wifi);
#ifdef BLECOUNTER
u8x8.setCursor(0,3);
if (cfg.blescan)
u8x8.printf("BLTH:%-4d", macs_ble);
else
u8x8.printf("%-16s", "BLTH:off");
#endif
// update LoRa SF display (line 3)
u8x8.setCursor(11,3);
u8x8.printf("SF:%c%c", lora_datarate[LMIC.datarate * 2], lora_datarate[LMIC.datarate * 2 + 1]);
// update wifi channel display (line 4)
u8x8.setCursor(11,4);
u8x8.printf("ch:%02d", channel);
// update RSSI limiter status & free memory display (line 5)
u8x8.setCursor(0,5);
u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", cfg.rssilimit);
u8x8.setCursor(10,5);
u8x8.printf("%4dKB", ESP.getFreeHeap() / 1024);
// update LoRa status display (line 6)
u8x8.setCursor(0,6);
u8x8.printf("%-16s", display_lora);
// update LMiC event display (line 7)
u8x8.setCursor(0,7);
u8x8.printf("%-16s", display_lmic);
}
void updateDisplay() {
// refresh display according to refresh cycle setting
if (DisplayTimerIRQ) {
portENTER_CRITICAL(&timerMux);
DisplayTimerIRQ--;
portEXIT_CRITICAL(&timerMux);
refreshDisplay();
// set display on/off according to current device configuration
if (DisplayState != cfg.screenon) {
DisplayState = cfg.screenon;
u8x8.setPowerSave(!cfg.screenon);
}
}
} // updateDisplay()
#endif // HAS_DISPLAY
#ifdef HAS_BUTTON
void readButton() {
if (ButtonPressed) {
ButtonPressed--;
ESP_LOGI(TAG, "Button pressed, resetting device to factory defaults");
eraseConfig();
esp_restart();
}
}
#endif
#if (HAS_LED != NOT_A_PIN) || defined (HAS_RGB_LED)
void blink_LED(uint16_t set_color, uint16_t set_blinkduration) {
LEDColor = set_color; // set color for RGB LED
LEDBlinkDuration = set_blinkduration; // duration
LEDBlinkStarted = millis(); // Time Start here
LEDState = LED_ON; // Let main set LED on
}
void led_loop() {
// Custom blink running always have priority other LoRaWAN led management
if ( LEDBlinkStarted && LEDBlinkDuration) {
//ESP_LOGI(TAG, "Start=%ld for %g",LEDBlinkStarted, LEDBlinkDuration );
// Custom blink is finished, let this order, avoid millis() overflow
if ( (millis() - LEDBlinkStarted) >= LEDBlinkDuration) {
// Led becomes off, and stop blink
LEDState = LED_OFF;
LEDBlinkStarted = 0;
LEDBlinkDuration = 0;
LEDColor = COLOR_NONE ;
} else {
// In case of LoRaWAN led management blinked off
LEDState = LED_ON;
}
// No custom blink, check LoRaWAN state
} else {
// LED indicators for viusalizing LoRaWAN state
if ( LMIC.opmode & (OP_JOINING | OP_REJOIN) ) {
LEDColor = COLOR_YELLOW;
// quick blink 20ms on each 1/5 second
LEDState = ((millis() % 200) < 20) ? LED_ON : LED_OFF; // TX data pending
} else if (LMIC.opmode & (OP_TXDATA | OP_TXRXPEND)) {
LEDColor = COLOR_BLUE;
// small blink 10ms on each 1/2sec (not when joining)
LEDState = ((millis() % 500) < 20) ? LED_ON : LED_OFF;
// This should not happen so indicate a problem
} else if ( LMIC.opmode & (OP_TXDATA | OP_TXRXPEND | OP_JOINING | OP_REJOIN) == 0 ) {
LEDColor = COLOR_RED;
// heartbeat long blink 200ms on each 2 seconds
LEDState = ((millis() % 2000) < 200) ? LED_ON : LED_OFF;
} else {
// led off
LEDColor = COLOR_NONE;
LEDState = LED_OFF;
}
}
//ESP_LOGI(TAG, "state=%d previous=%d Color=%d",LEDState, previousLEDState, LEDColor );
// led need to change state? avoid digitalWrite() for nothing
if (LEDState != previousLEDState) {
if (LEDState == LED_ON) {
rgb_set_color(LEDColor);
#ifdef LED_ACTIVE_LOW
digitalWrite(HAS_LED, LOW);
#else
digitalWrite(HAS_LED, HIGH);
#endif
} else {
rgb_set_color(COLOR_NONE);
#ifdef LED_ACTIVE_LOW
digitalWrite(HAS_LED, HIGH);
#else
digitalWrite(HAS_LED, LOW);
#endif
}
previousLEDState = LEDState;
}
}; // led_loop()
#endif
/* begin Aruino SETUP ------------------------------------------------------------ */
void setup() {
char features[64] = "";
// disable brownout detection
#ifdef DISABLE_BROWNOUT
@ -413,7 +479,6 @@ void setup() {
#endif
ESP_LOGI(TAG, "Starting %s %s", PROGNAME, PROGVERSION);
rgb_set_color(COLOR_NONE);
// initialize system event handler for wifi task, needed for wifi_sniffer_init()
esp_event_loop_init(NULL, NULL);
@ -435,67 +500,100 @@ void setup() {
loadConfig(); // includes initialize if necessary
// initialize led if needed
#ifdef HAS_LED
#if (HAS_LED != NOT_A_PIN)
pinMode(HAS_LED, OUTPUT);
digitalWrite(HAS_LED, LOW);
strcat(features, " LED");
#endif
#ifdef HAS_RGB_LED
rgb_set_color(COLOR_PINK);
strcat(features, " RGB");
delay(1000);
#endif
// initialize button handling if needed
#ifdef HAS_BUTTON
strcat(features, " BTN_");
#ifdef BUTTON_PULLUP
strcat(features, "PU");
// install button interrupt (pullup mode)
pinMode(HAS_BUTTON, INPUT_PULLUP);
attachInterrupt(digitalPinToInterrupt(HAS_BUTTON), isr_button_pressed, RISING);
attachInterrupt(digitalPinToInterrupt(HAS_BUTTON), ButtonIRQ, RISING);
#else
strcat(features, "PD");
// install button interrupt (pulldown mode)
pinMode(HAS_BUTTON, INPUT_PULLDOWN);
attachInterrupt(digitalPinToInterrupt(HAS_BUTTON), isr_button_pressed, FALLING);
attachInterrupt(digitalPinToInterrupt(HAS_BUTTON), ButtonIRQ, FALLING);
#endif
#endif
// initialize wifi antenna if needed
#ifdef HAS_ANTENNA_SWITCH
strcat(features, " ANT");
antenna_init();
#endif
#ifdef HAS_DISPLAY
// initialize display
strcat(features, " OLED");
// initialize display
init_display(PROGNAME, PROGVERSION);
DisplayState = cfg.screenon;
u8x8.setPowerSave(!cfg.screenon); // set display off if disabled
u8x8.draw2x2String(0, 0, "PAX:0");
u8x8.setCursor(0,4);
u8x8.printf("WIFI: 0");
u8x8.printf("WIFI:0");
#ifdef BLECOUNTER
u8x8.setCursor(0,3);
u8x8.printf("BLTH: 0");
u8x8.printf("BLTH:0");
#endif
u8x8.setCursor(0,5);
u8x8.printf(!cfg.rssilimit ? "RLIM: off" : "RLIM: %d", cfg.rssilimit);
u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%d", cfg.rssilimit);
sprintf(display_lora, "Join wait");
// setup Display IRQ, thanks to https://techtutorialsx.com/2017/10/07/esp32-arduino-timer-interrupts/
displaytimer = timerBegin(0, 80, true); // prescaler 80 -> divides 80 MHz CPU freq to 1 MHz, timer 0, count up
timerAttachInterrupt(displaytimer, &DisplayIRQ, true); // interrupt handler DisplayIRQ, triggered by edge
timerAlarmWrite(displaytimer, DISPLAYREFRESH_MS * 1000, true); // reload interrupt after each trigger of display refresh cycle
timerAlarmEnable(displaytimer); // enable display interrupt
#endif
// setup channel rotation IRQ, thanks to https://techtutorialsx.com/2017/10/07/esp32-arduino-timer-interrupts/
channelSwitch = timerBegin(1, 80, true); // prescaler 80 -> divides 80 MHz CPU freq to 1 MHz, timer 1, count up
timerAttachInterrupt(channelSwitch, &ChannelSwitchIRQ, true); // interrupt handler, triggered by edge
timerAlarmWrite(channelSwitch, cfg.wifichancycle * 10000, true); // reload interrupt after each trigger of channel switch cycle
timerAlarmEnable(channelSwitch); // enable channel switching interrupt
// show compiled features
ESP_LOGI(TAG, "Features %s", features);
// output LoRaWAN keys to console
#ifdef VERBOSE
printKeys();
#endif
os_init(); // setup LMIC
LMIC_reset(); // Reset the MAC state. Session and pending data transfers will be discarded.
os_setCallback(&initjob, lora_init); // setup initial job & join network
wifi_sniffer_init(); // setup wifi in monitor mode and start MAC counting
// initialize salt value using esp_random() called by random() in arduino-esp32 core
// note: do this *after* wifi has started, since gets it's seed from RF noise
salt_reset(); // get new 16bit for salting hashes
reset_salt(); // get new 16bit for salting hashes
// run wifi task on core 0 and lora task on core 1 and bt task on core 0
ESP_LOGI(TAG, "Starting Lora task on core 1");
xTaskCreatePinnedToCore(lorawan_loop, "loratask", 2048, ( void * ) 1, ( 5 | portPRIVILEGE_BIT ), NULL, 1);
ESP_LOGI(TAG, "Starting Wifi task on core 0");
xTaskCreatePinnedToCore(sniffer_loop, "wifisniffer", 16384, ( void * ) 1, 1, NULL, 0);
xTaskCreatePinnedToCore(sniffer_loop, "wifisniffer", 2048, ( void * ) 1, 1, NULL, 0);
#ifdef BLECOUNTER
if (cfg.blescan) { // start BLE task only if BLE function is enabled in NVRAM configuration
ESP_LOGI(TAG, "Starting Bluetooth task on core 0");
xTaskCreatePinnedToCore(bt_loop, "btscan", 16384, NULL, 5, NULL, 0);
xTaskCreatePinnedToCore(bt_loop, "btscan", 4096, ( void * ) 1, 1, NULL, 0);
}
#endif
@ -513,56 +611,30 @@ do_send(&sendjob);
// https://techtutorialsx.com/2017/05/09/esp32-get-task-execution-core/
void loop() {
uptimecounter = uptime() / 1000; // count uptime seconds
// simple state machine for controlling display, LED, button, etc.
uptimecounter = uptime() / 1000; // counts uptime in seconds (64bit)
#ifdef HAS_BUTTON // ...then check if pressed
if (ButtonTriggered) {
ButtonTriggered = false;
ESP_LOGI(TAG, "Button pressed, resetting device to factory defaults");
eraseConfig();
esp_restart();
#if (HAS_LED != NOT_A_PIN) || defined (HAS_RGB_LED)
led_loop();
#endif
#ifdef HAS_BUTTON
readButton();
#endif
#ifdef HAS_DISPLAY
updateDisplay();
#endif
// check free memory
if (ESP.getFreeHeap() <= MEM_LOW) {
do_send(&sendjob); // send count
reset_counters(); // clear macs container and reset all counters
reset_salt(); // get new salt for salting hashes
}
#endif
#ifdef HAS_DISPLAY // ...then update mask
vTaskDelay(10/portTICK_PERIOD_MS); // reset watchdog
// set display on/off according to current device configuration
u8x8.setPowerSave(!cfg.screenon);
// update counter display (lines 0-4)
char buff[16];
snprintf(buff, sizeof(buff), "PAX:%-4d", (int) macs.size()); // convert 16-bit MAC counter to decimal counter value
u8x8.draw2x2String(0, 0, buff); // display number on unique macs total Wifi + BLE
u8x8.setCursor(0,4);
u8x8.printf("WIFI: %-4d", (int) wifis.size());
#ifdef BLECOUNTER
u8x8.setCursor(0,3);
if (cfg.blescan)
u8x8.printf("BLTH: %-4d", (int) bles.size());
else
u8x8.printf("%-16s", "BLTH: off");
#endif
// update wifi channel display (line 4)
u8x8.setCursor(11,4);
u8x8.printf("ch:%02i", channel);
// update RSSI limiter status display (line 5)
u8x8.setCursor(0,5);
u8x8.printf(!cfg.rssilimit ? "RLIM: off" : "RLIM: %-4d", cfg.rssilimit);
// update LoRa status display (line 6)
u8x8.setCursor(0,6);
u8x8.printf("%-16s", display_lora);
// update LMiC event display (line 7)
u8x8.setCursor(0,7);
u8x8.printf("%-16s", display_lmic);
#endif
vTaskDelay(1000/DISPLAYFPS/portTICK_PERIOD_MS);
}
}
/* end Aruino LOOP ------------------------------------------------------------ */

151
src/main.h
View File

@ -1,131 +1,44 @@
#pragma once
// program version - note: increment version after modifications to configData_t struct!!
#define PROGVERSION "1.3.01" // use max 10 chars here!
#define PROGVERSION "1.3.4" // use max 10 chars here!
#define PROGNAME "PAXCNT"
// Verbose enables serial output
#define VERBOSE 1 // comment out to silence the device, for mute use build option
//--- Declarations ---
// set this to include BLE counting and vendor filter functions
#define VENDORFILTER 1 // comment out if you want to count things, not people
#define BLECOUNTER 1 // comment out if you don't want BLE count
enum led_states {
LED_OFF,
LED_ON
};
// BLE scan parameters
#define BLESCANTIME 11 // [seconds] scan duration, see note below
#define BLESCANWINDOW 10 // [milliseconds] scan window, see below, 3 .. 10240, default 10
#define BLESCANINTERVAL 10 // [milliseconds] how long to wait between scans, 3 .. 10240, default 10
#if defined(CFG_eu868)
const char lora_datarate[] = {"1211100908077BFSNA"};
#elif defined(CFG_us915)
const char lora_datarate[] = {"100908078CNA121110090807"};
#endif
/* Note: guide for setting bluetooth parameters
*
* |< Scan Window > |< Scan Window > |< Scan Window > |
* |< Scan Interval >|< Scan Interval >|< Scan Interval >|
* |< Scan duration >|
*
* Scan duration sets how long scanning should be going on, interrupting a wifi scan cycle.
* Scan window sets how much of the interval should be occupied by scanning.
* Scan interval is how long scanning should be done on each channel. BLE uses 3 channels for advertising.
* -> Adjust these values with power consumption in mind if power is limited.
*/
//--- Prototypes ---
// WiFi scan parameters
#define WIFI_CHANNEL_MIN 1 // start channel number where scan begings
#define WIFI_CHANNEL_MAX 13 // total channel number to scan
#define WIFI_MY_COUNTRY "EU" // select locale for Wifi RF settings
#define WIFI_CHANNEL_SWITCH_INTERVAL 50 // [seconds/100] -> 0,5 sec.
// defined in main.cpp
void reset_counters(void);
void blink_LED(uint16_t set_color, uint16_t set_blinkduration);
void led_loop(void);
// LoRa payload send cycle
#define SEND_SECS 120 // [seconds/2] -> 240 sec.
//#define SEND_SECS 30 // [seconds/2] -> 60 sec.
// defined in configmanager.cpp
void eraseConfig(void);
void saveConfig(void);
void loadConfig(void);
// Default LoRa Spreadfactor
#define LORASFDEFAULT 9 // 7 ... 12 SF, according to LoRaWAN specs
#define MAXLORARETRY 500 // maximum count of TX retries if LoRa busy
#define RCMDPORT 2 // LoRaWAN Port on which device listenes for remote commands
// defined in lorawan.cpp
void onEvent(ev_t ev);
void do_send(osjob_t* j);
void gen_lora_deveui(uint8_t * pdeveui);
void RevBytes(unsigned char* b, size_t c);
void get_hard_deveui(uint8_t *pdeveui);
// Default RGB LED luminosity (in %)
#define RGBLUMINOSITY 30 // 30%
// defined in wifisniffer.cpp
void wifi_sniffer_init(void);
void wifi_sniffer_set_channel(uint8_t channel);
void wifi_sniffer_packet_handler(void *buff, wifi_promiscuous_pkt_type_t type);
// OLED Display refresh cycle (in Milliseconds)
#define DISPLAYFPS 5 // [fps] -> 5 Frames per second ps = 200ms refreseh cycle
// LMIC settings
// define hardware independent LMIC settings here, settings of standard library in /lmic/config.h will be ignored
// define hardware specifics settings in platformio.ini as build_flag for hardware environment
// Select frequency band here according to national regulations
#define CFG_eu868 1
//#define CFG_us915 1
// This is the SX1272/SX1273 radio, which is also used on the HopeRF
// RFM92 boards.
//#define CFG_sx1272_radio 1
// This is the SX1276/SX1277/SX1278/SX1279 radio, which is also used on
// the HopeRF RFM95 boards.
//#define CFG_sx1276_radio 1
// 16 μs per tick
// LMIC requires ticks to be 15.5μs - 100 μs long
#define US_PER_OSTICK_EXPONENT 4
#define US_PER_OSTICK (1 << US_PER_OSTICK_EXPONENT)
#define OSTICKS_PER_SEC (1000000 / US_PER_OSTICK)
// Set this to 1 to enable some basic debug output (using printf) about
// RF settings used during transmission and reception. Set to 2 to
// enable more verbose output. Make sure that printf is actually
// configured (e.g. on AVR it is not by default), otherwise using it can
// cause crashing.
//#define LMIC_DEBUG_LEVEL 1
// Enable this to allow using printf() to print to the given serial port
// (or any other Print object). This can be easy for debugging. The
// current implementation only works on AVR, though.
//#define LMIC_PRINTF_TO Serial
// Any runtime assertion failures are printed to this serial port (or
// any other Print object). If this is unset, any failures just silently
// halt execution.
#define LMIC_FAILURE_TO Serial
// Uncomment this to disable all code related to joining
//#define DISABLE_JOIN
// Uncomment this to disable all code related to ping
#define DISABLE_PING
// Uncomment this to disable all code related to beacon tracking.
// Requires ping to be disabled too
#define DISABLE_BEACONS
// Uncomment these to disable the corresponding MAC commands.
// Class A
//#define DISABLE_MCMD_DCAP_REQ // duty cycle cap
//#define DISABLE_MCMD_DN2P_SET // 2nd DN window param
//#define DISABLE_MCMD_SNCH_REQ // set new channel
// Class B
//#define DISABLE_MCMD_PING_SET // set ping freq, automatically disabled by DISABLE_PING
//#define DISABLE_MCMD_BCNI_ANS // next beacon start, automatical disabled by DISABLE_BEACON
// In LoRaWAN, a gateway applies I/Q inversion on TX, and nodes do the
// same on RX. This ensures that gateways can talk to nodes and vice
// versa, but gateways will not hear other gateways and nodes will not
// hear other nodes. By uncommenting this macro, this inversion is
// disabled and this node can hear other nodes. If two nodes both have
// this macro set, they can talk to each other (but they can no longer
// hear gateways). This should probably only be used when debugging
// and/or when talking to the radio directly (e.g. like in the "raw"
// example).
//#define DISABLE_INVERT_IQ_ON_RX
// This allows choosing between multiple included AES implementations.
// Make sure exactly one of these is uncommented.
//
// This selects the original AES implementation included LMIC. This
// implementation is optimized for speed on 32-bit processors using
// fairly big lookup tables, but it takes up big amounts of flash on the
// AVR architecture.
#define USE_ORIGINAL_AES
//
// This selects the AES implementation written by Ideetroon for their
// own LoRaWAN library. It also uses lookup tables, but smaller
// byte-oriented ones, making it use a lot less flash space (but it is
// also about twice as slow as the original).
// #define USE_IDEETRON_AES
// defined in blescan.cpp
void bt_loop(void *ignore);

129
src/paxcounter.conf Normal file
View File

@ -0,0 +1,129 @@
// ----- Paxcounter user config file ------
//
// --> adapt to your needs and use case <--
// Verbose enables serial output
#define VERBOSE 1 // comment out to silence the device, for mute use build option
// set this to include BLE counting and vendor filter functions
#define VENDORFILTER 1 // comment out if you want to count things, not people
#define BLECOUNTER 1 // comment out if you don't want BLE count
// BLE scan parameters
#define BLESCANTIME 11 // [seconds] scan duration, see note below
#define BLESCANWINDOW 10 // [milliseconds] scan window, see below, 3 .. 10240, default 10
#define BLESCANINTERVAL 10 // [milliseconds] how long to wait between scans, 3 .. 10240, default 10
/* Note: guide for setting bluetooth parameters
*
* |< Scan Window > |< Scan Window > |< Scan Window > |
* |< Scan Interval >|< Scan Interval >|< Scan Interval >|
* |< Scan duration >|
*
* Scan duration sets how long scanning should be going on, interrupting a wifi scan cycle.
* Scan window sets how much of the interval should be occupied by scanning.
* Scan interval is how long scanning should be done on each channel. BLE uses 3 channels for advertising.
* -> Adjust these values with power consumption in mind if power is limited.
*/
// WiFi scan parameters
#define WIFI_CHANNEL_MIN 1 // start channel number where scan begings
#define WIFI_CHANNEL_MAX 13 // total channel number to scan
#define WIFI_MY_COUNTRY "EU" // select locale for Wifi RF settings
#define WIFI_CHANNEL_SWITCH_INTERVAL 50 // [seconds/100] -> 0,5 sec.
// LoRa payload send cycle --> take care of duty cycle of LoRaWAN network! <--
#define SEND_SECS 120 // [seconds/2] -> 240 sec.
#define MEM_LOW 2048 // [Bytes] low memory threshold triggering a send cycle
// Default LoRa Spreadfactor
#define LORASFDEFAULT 9 // 7 ... 12 SF, according to LoRaWAN specs
#define MAXLORARETRY 500 // maximum count of TX retries if LoRa busy
#define RCMDPORT 2 // LoRaWAN Port on which device listenes for remote commands
// Default RGB LED luminosity (in %)
#define RGBLUMINOSITY 30 // 30%
// OLED Display refresh cycle (in Milliseconds)
#define DISPLAYREFRESH_MS 40 // e.g. 40ms -> 1000/40 = 25 frames per second
// LMIC settings
// define hardware independent LMIC settings here, settings of standard library in /lmic/config.h will be ignored
// define hardware specifics settings in platformio.ini as build_flag for hardware environment
// Select frequency band here according to national regulations
#define CFG_eu868 1
//#define CFG_us915 1
// This is the SX1272/SX1273 radio, which is also used on the HopeRF
// RFM92 boards.
//#define CFG_sx1272_radio 1
// This is the SX1276/SX1277/SX1278/SX1279 radio, which is also used on
// the HopeRF RFM95 boards.
//#define CFG_sx1276_radio 1
// 16 μs per tick
// LMIC requires ticks to be 15.5μs - 100 μs long
#define US_PER_OSTICK_EXPONENT 4
#define US_PER_OSTICK (1 << US_PER_OSTICK_EXPONENT)
#define OSTICKS_PER_SEC (1000000 / US_PER_OSTICK)
// Set this to 1 to enable some basic debug output (using printf) about
// RF settings used during transmission and reception. Set to 2 to
// enable more verbose output. Make sure that printf is actually
// configured (e.g. on AVR it is not by default), otherwise using it can
// cause crashing.
//#define LMIC_DEBUG_LEVEL 1
// Enable this to allow using printf() to print to the given serial port
// (or any other Print object). This can be easy for debugging. The
// current implementation only works on AVR, though.
//#define LMIC_PRINTF_TO Serial
// Any runtime assertion failures are printed to this serial port (or
// any other Print object). If this is unset, any failures just silently
// halt execution.
#define LMIC_FAILURE_TO Serial
// Uncomment this to disable all code related to joining
//#define DISABLE_JOIN
// Uncomment this to disable all code related to ping
#define DISABLE_PING
// Uncomment this to disable all code related to beacon tracking.
// Requires ping to be disabled too
#define DISABLE_BEACONS
// Uncomment these to disable the corresponding MAC commands.
// Class A
//#define DISABLE_MCMD_DCAP_REQ // duty cycle cap
//#define DISABLE_MCMD_DN2P_SET // 2nd DN window param
//#define DISABLE_MCMD_SNCH_REQ // set new channel
// Class B
//#define DISABLE_MCMD_PING_SET // set ping freq, automatically disabled by DISABLE_PING
//#define DISABLE_MCMD_BCNI_ANS // next beacon start, automatical disabled by DISABLE_BEACON
// In LoRaWAN, a gateway applies I/Q inversion on TX, and nodes do the
// same on RX. This ensures that gateways can talk to nodes and vice
// versa, but gateways will not hear other gateways and nodes will not
// hear other nodes. By uncommenting this macro, this inversion is
// disabled and this node can hear other nodes. If two nodes both have
// this macro set, they can talk to each other (but they can no longer
// hear gateways). This should probably only be used when debugging
// and/or when talking to the radio directly (e.g. like in the "raw"
// example).
//#define DISABLE_INVERT_IQ_ON_RX
// This allows choosing between multiple included AES implementations.
// Make sure exactly one of these is uncommented.
//
// This selects the original AES implementation included LMIC. This
// implementation is optimized for speed on 32-bit processors using
// fairly big lookup tables, but it takes up big amounts of flash on the
// AVR architecture.
#define USE_ORIGINAL_AES
//
// This selects the AES implementation written by Ideetroon for their
// own LoRaWAN library. It also uses lookup tables, but smaller
// byte-oriented ones, making it use a lot less flash space (but it is
// also about twice as slow as the original).
// #define USE_IDEETRON_AES

90
src/rcommand.cpp
View File

@ -14,22 +14,18 @@ static const char *TAG = "rcommand";
// table of remote commands and assigned functions
typedef struct {
const int nam;
void (*func)(int);
const uint8_t nam;
void (*func)(uint8_t);
const bool store;
} cmd_t;
// functions defined in configmanager.cpp
void eraseConfig(void);
void saveConfig(void);
// function defined in antenna.cpp
#ifdef HAS_ANTENNA_SWITCH
void antenna_select(const int8_t _ant);
void antenna_select(const uint8_t _ant);
#endif
// help function to assign LoRa datarates to numeric spreadfactor values
void switch_lora (int sf, int tx) {
void switch_lora (uint8_t sf, uint8_t tx) {
if ( tx > 20 ) return;
cfg.txpower = tx;
switch (sf) {
@ -54,7 +50,7 @@ void switch_lora (int sf, int tx) {
}
// set of functions that can be triggered by remote commands
void set_reset(int val) {
void set_reset(uint8_t val) {
switch (val) {
case 0: // restart device
ESP_LOGI(TAG, "Remote command: restart device");
@ -64,12 +60,8 @@ void set_reset(int val) {
break;
case 1: // reset MAC counter
ESP_LOGI(TAG, "Remote command: reset MAC counter");
macs.clear(); // clear all macs container
wifis.clear(); // clear Wifi macs container
#ifdef BLECOUNTER
bles.clear(); // clear BLE macs container
#endif
salt_reset(); // get new 16bit salt
reset_counters(); // clear macs
reset_salt(); // get new salt
sprintf(display_lora, "Reset counter");
break;
case 2: // reset device to factory settings
@ -80,27 +72,29 @@ void set_reset(int val) {
}
};
void set_rssi(int val) {
void set_rssi(uint8_t val) {
cfg.rssilimit = val * -1;
ESP_LOGI(TAG, "Remote command: set RSSI limit to %i", cfg.rssilimit);
ESP_LOGI(TAG, "Remote command: set RSSI limit to %d", cfg.rssilimit);
};
void set_wifiscancycle(int val) {
cfg.wifiscancycle = val;
ESP_LOGI(TAG, "Remote command: set Wifi scan cycle duration to %i seconds", cfg.wifiscancycle*2);
void set_sendcycle(uint8_t val) {
cfg.sendcycle = val;
ESP_LOGI(TAG, "Remote command: set payload send cycle to %d seconds", cfg.sendcycle*2);
};
void set_wifichancycle(int val) {
void set_wifichancycle(uint8_t val) {
cfg.wifichancycle = val;
ESP_LOGI(TAG, "Remote command: set Wifi channel switch interval to %i seconds", cfg.wifichancycle/100);
// modify wifi channel rotation IRQ
timerAlarmWrite(channelSwitch, cfg.wifichancycle * 10000, true); // reload interrupt after each trigger of channel switch cycle
ESP_LOGI(TAG, "Remote command: set Wifi channel switch interval to %.1f seconds", cfg.wifichancycle/float(100));
};
void set_blescantime(int val) {
void set_blescantime(uint8_t val) {
cfg.blescantime = val;
ESP_LOGI(TAG, "Remote command: set BLE scan time to %i seconds", cfg.blescantime);
ESP_LOGI(TAG, "Remote command: set BLE scan time to %d seconds", cfg.blescantime);
};
void set_countmode(int val) {
void set_countmode(uint8_t val) {
switch (val) {
case 0: // cyclic unconfirmed
cfg.countermode = 0;
@ -117,7 +111,7 @@ void set_countmode(int val) {
}
};
void set_screensaver(int val) {
void set_screensaver(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set screen saver to %s ", val ? "on" : "off");
switch (val) {
case 1: cfg.screensaver = val; break;
@ -125,7 +119,7 @@ void set_screensaver(int val) {
}
};
void set_display(int val) {
void set_display(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set screen to %s", val ? "on" : "off");
switch (val) {
case 1: cfg.screenon = val; break;
@ -133,12 +127,12 @@ void set_display(int val) {
}
};
void set_lorasf(int val) {
ESP_LOGI(TAG, "Remote command: set LoRa SF to %i", val);
void set_lorasf(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set LoRa SF to %d", val);
switch_lora(val, cfg.txpower);
};
void set_loraadr(int val) {
void set_loraadr(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set LoRa ADR mode to %s", val ? "on" : "off");
switch (val) {
case 1: cfg.adrmode = val; break;
@ -147,14 +141,12 @@ void set_loraadr(int val) {
LMIC_setAdrMode(cfg.adrmode);
};
void set_blescan(int val) {
void set_blescan(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set BLE scan mode to %s", val ? "on" : "off");
switch (val) {
case 0:
cfg.blescan = 0;
#ifdef BLECOUNTER
bles.clear(); // clear BLE macs container
#endif
macs_ble = 0; // clear BLE counter
break;
default:
cfg.blescan = 1;
@ -162,7 +154,7 @@ void set_blescan(int val) {
}
};
void set_wifiant(int val) {
void set_wifiant(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set Wifi antenna to %s", val ? "external" : "internal");
switch (val) {
case 1: cfg.wifiant = val; break;
@ -173,7 +165,7 @@ void set_wifiant(int val) {
#endif
};
void set_vendorfilter(int val) {
void set_vendorfilter(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set vendorfilter mode to %s", val ? "on" : "off");
switch (val) {
case 1: cfg.vendorfilter = val; break;
@ -181,22 +173,22 @@ void set_vendorfilter(int val) {
}
};
void set_rgblum(int val) {
void set_rgblum(uint8_t val) {
// Avoid wrong parameters
cfg.rgblum = (val>=0 && val<=100) ? (uint8_t) val : RGBLUMINOSITY;
ESP_LOGI(TAG, "Remote command: set RGB Led luminosity %d", cfg.rgblum);
};
void set_lorapower(int val) {
ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %i", val);
void set_lorapower(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %d", val);
switch_lora(cfg.lorasf, val);
};
void set_noop (int val) {
void set_noop (uint8_t val) {
ESP_LOGI(TAG, "Remote command: noop - doing nothing");
};
void get_config (int val) {
void get_config (uint8_t val) {
ESP_LOGI(TAG, "Remote command: get configuration");
int size = sizeof(configData_t);
// declare send buffer (char byte array)
@ -205,20 +197,20 @@ void get_config (int val) {
memcpy(sendData, &cfg, size);
LMIC_setTxData2(RCMDPORT, sendData, size-1, 0); // send data unconfirmed on RCMD Port
delete sendData; // free memory
ESP_LOGI(TAG, "%i bytes queued in send queue", size-1);
ESP_LOGI(TAG, "%d bytes queued in send queue", size-1);
};
void get_uptime (int val) {
void get_uptime (uint8_t val) {
ESP_LOGI(TAG, "Remote command: get uptime");
int size = sizeof(uptimecounter);
unsigned char *sendData = new unsigned char[size];
memcpy(sendData, (unsigned char*)&uptimecounter, size);
memcpy(sendData, (unsigned char*)&uptimecounter , size);
LMIC_setTxData2(RCMDPORT, sendData, size-1, 0); // send data unconfirmed on RCMD Port
delete sendData; // free memory
ESP_LOGI(TAG, "%i bytes queued in send queue", size-1);
ESP_LOGI(TAG, "%d bytes queued in send queue", size-1);
};
void get_cputemp (int val) {
void get_cputemp (uint8_t val) {
ESP_LOGI(TAG, "Remote command: get cpu temperature");
float temp = temperatureRead();
int size = sizeof(temp);
@ -226,7 +218,7 @@ void get_cputemp (int val) {
memcpy(sendData, (unsigned char*)&temp, size);
LMIC_setTxData2(RCMDPORT, sendData, size-1, 0); // send data unconfirmed on RCMD Port
delete sendData; // free memory
ESP_LOGI(TAG, "%i bytes queued in send queue", size-1);
ESP_LOGI(TAG, "%d bytes queued in send queue", size-1);
};
// assign previously defined functions to set of numeric remote commands
@ -242,7 +234,7 @@ cmd_t table[] = {
{0x07, set_loraadr, true},
{0x08, set_screensaver, true},
{0x09, set_reset, false},
{0x0a, set_wifiscancycle, true},
{0x0a, set_sendcycle, true},
{0x0b, set_wifichancycle, true},
{0x0c, set_blescantime, true},
{0x0d, set_vendorfilter, false},
@ -255,7 +247,7 @@ cmd_t table[] = {
};
// check and execute remote command
void rcommand(int cmd, int arg) {
void rcommand(uint8_t cmd, uint8_t arg) {
int i = sizeof(table) / sizeof(table[0]); // number of commands in command table
bool store_flag = false;
while(i--) {