merged S3-usb-stick into build workflow

include/display.h

@@ -86,6 +86,10 @@ extern BB_SPI_LCD *dp;
 #define MY_DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 64X
 #endif
 
+#ifndef MY_DISPLAY_FIRSTLINE
+#define MY_DISPLAY_FIRSTLINE 0
+#endif
+
 // settings for qr code generator
 #define QR_VERSION 3 // 29 x 29px
 

include/i2c.h

@@ -4,6 +4,15 @@
 #include <Arduino.h>
 #include <Wire.h>
 #include <BitBang_I2C.h>
+#include <Wire.h>
+
+#ifndef MY_DISPLAY_SDA
+#define MY_DISPLAY_SDA SDA
+#endif
+
+#ifndef MY_DISPLAY_SCL
+#define MY_DISPLAY_SCL SCL
+#endif
 
 #define SSD1306_PRIMARY_ADDRESS (0x3D)
 #define SSD1306_SECONDARY_ADDRESS (0x3C)
@@ -14,14 +23,6 @@
 #define MCP_24AA02E64_PRIMARY_ADDRESS (0x50)
 #define QUECTEL_GPS_PRIMARY_ADDRESS (0x10)
 
-#ifndef MY_DISPLAY_SDA
-#define MY_DISPLAY_SDA SDA
-#endif
-
-#ifndef MY_DISPLAY_SCL
-#define MY_DISPLAY_SCL SCL
-#endif
-
 extern SemaphoreHandle_t I2Caccess;
 
 void i2c_init(void);

platformio_orig_s3-usb-stick.ini

@@ -0,0 +1,62 @@
+[board]
+halfile = ttgotdongles3.h
+;halfile = ttgotdongledisplays3.h
+
+[platformio]
+; upload firmware to board with usb cable
+default_envs = usb
+description = Paxcounter is a device for metering passenger flows in realtime. It counts how many mobile devices are around.
+
+[common]
+; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
+release_version = 3.3.2
+; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
+; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
+debug_level = 5
+extra_scripts = pre:build.py
+otakeyfile = ota.conf
+lorakeyfile = loraconf.h
+lmicconfigfile = lmic_config.h
+platform_espressif32 = espressif32@5.2.0
+monitor_speed = 115200
+upload_speed = 115200 ; set by build.py and taken from hal file
+lib_deps_all =
+    bitbank2/BitBang_I2C@^2.2.1
+    https://github.com/bitbank2/bb_spi_lcd.git
+    fastled/FastLED @ ^3.5.0
+    ;greyrook/libpax @ ^1.0.1
+    https://github.com/cyberman54/libpax.git
+    https://github.com/SukkoPera/Arduino-Rokkit-Hash.git
+    bblanchon/ArduinoJson @ ^6
+    spacehuhn/SimpleButton
+    256dpi/MQTT @ ^2.5.0
+build_flags_basic =
+    -include "src/hal/${board.halfile}"
+    -include "src/paxcounter.conf"
+    '-DCORE_DEBUG_LEVEL=${common.debug_level}'
+    '-DLOG_LOCAL_LEVEL=${common.debug_level}'
+    '-DPROGVERSION="${common.release_version}"'
+    '-D LIBPAX_WIFI'
+    '-D LIBPAX_BLE'
+    '-D LIBPAX_ARDUINO'
+build_flags_all =
+    ${common.build_flags_basic}
+    -mfix-esp32-psram-cache-issue
+
+[env]
+framework = arduino
+board = ESP32-S3-DevKitC-1
+board_build.partitions = min_spiffs.csv
+build_type = release
+upload_speed = ${common.upload_speed}
+;upload_port = COM6
+platform = ${common.platform_espressif32}
+lib_deps = ${common.lib_deps_all}
+build_flags = ${common.build_flags_all}
+upload_protocol = ${common.upload_protocol}
+extra_scripts = ${common.extra_scripts}
+monitor_speed = ${common.monitor_speed}
+monitor_filters = time, esp32_exception_decoder, default
+
+[env:usb]
+upload_protocol = esptool

src/hal/ttgotdongledisplays3.h

@@ -0,0 +1,31 @@
+// clang-format off
+// upload_speed 1500000
+// board ESP32-S3-DevKitC-1
+
+// see https://github.com/Xinyuan-LilyGO/T-Dongle-S3
+
+#ifndef _TTGOTDONGLES3_H
+#define _TTGOTDONGLES3_H
+
+#include <stdint.h>
+
+#define HAS_LED NOT_A_PIN
+#define HAS_BUTTON 0
+
+#define HAS_SDCARD  2      // this board has a SD MMC card-reader/writer
+#define SDCARD_SLOTWIDTH 4 // 4-line interface
+
+#define HAS_DISPLAY 2       // TFT-LCD
+#define TFT_TYPE DISPLAY_TDONGLE_S3
+#define MY_DISPLAY_FLIP  1  // use if display is rotated
+#define MY_DISPLAY_WIDTH 80
+#define MY_DISPLAY_HEIGHT 160
+
+#define TFT_CS_PIN     4
+#define TFT_SDA_PIN    3
+#define TFT_SCL_PIN    5
+#define TFT_DC_PIN     2
+#define TFT_RES_PIN    1
+#define TFT_LEDA_PIN   38
+
+#endif

src/hal/ttgotdongles3.h

@@ -0,0 +1,21 @@
+// clang-format off
+// upload_speed 1500000
+// board ESP32-S3-DevKitC-1
+
+// for pinouts see https://github.com/Xinyuan-LilyGO/T-Dongle-S3
+
+#ifndef _TTGOTDONGLES3_H
+#define _TTGOTDONGLES3_H
+
+#include <stdint.h>
+
+#define HAS_LED NOT_A_PIN
+#define RGB_LED_COUNT 1
+#define HAS_RGB_LED FastLED.addLeds<APA102, 40, 39, BGR>(leds, RGB_LED_COUNT)
+#define FASTLED_INTERNAL
+#define HAS_BUTTON 0       // dongle button is on GPIO0
+#define HAS_SDCARD  2      // dongle has a SD MMC card-reader/writer
+#define SDCARD_SLOTWIDTH 4 // dongle has 4 line interface
+#define SDCARD_SLOTCONFIG { .clk = GPIO_NUM_12, .cmd = GPIO_NUM_16, .d0 = GPIO_NUM_14, .d1 = GPIO_NUM_17, .d2 = GPIO_NUM_21, .d3 = GPIO_NUM_18, .cd = SDMMC_SLOT_NO_CD, .wp = SDMMC_SLOT_NO_WP, .width = 4, .flags = 0, }
+
+#endif