done chages

platformio.ini

@@ -7,7 +7,7 @@
 
 ; ---> SELECT THE TARGET PLATFORM HERE! <---
 [board]
-halfile = generic.h
+;halfile = generic.h
 ;halfile = ebox.h
 ;halfile = eboxtube.h
 ;halfile = ecopower.h
@@ -16,7 +16,7 @@ halfile = generic.h
 ;halfile = ttgov1.h
 ;halfile = ttgov2.h
 ;halfile = ttgov21old.h
-;halfile = ttgov21new.h
+halfile = ttgov21new.h
 ;halfile = ttgofox.h
 ;halfile = ttgobeam.h
 ;halfile = ttgobeam10.h
@@ -46,7 +46,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 2.0.12
+release_version = 2.0.13
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 3
@@ -73,7 +73,7 @@ lib_deps_gps =
 lib_deps_sensors =
     adafruit/Adafruit Unified Sensor @ ^1.1.4
     adafruit/Adafruit BME280 Library @ ^2.1.0
-    adafruit/Adafruit BMP085 Library @ ^1.1.0
+    adafruit/Adafruit BMP085 Unified
     boschsensortec/BSEC Software Library @ 1.5.1474
     https://github.com/ricki-z/SDS011.git
 lib_deps_basic =
@@ -110,7 +110,7 @@ build_flags_all =
 [env]
 lib_ldf_mode = deep ; #632 Fixes compiler error with OneBitDisplay library
 framework = arduino
-board = esp32dev
+board = ttgo-lora32-v21new
 board_build.partitions = min_spiffs.csv
 upload_speed = ${common.upload_speed}
 ;upload_port = COM8

src/ota.sample.conf

@@ -1,8 +0,0 @@
-[ota]
-OTA_WIFI_SSID = MyHomeWifi
-OTA_WIFI_PASS = FooBar42!
-
-[bintray]
-BINTRAY_USER = MyBintrayUser
-BINTRAY_REPO = MyBintrayRepo
-BINTRAY_API_TOKEN = 3894a7a51d70c6523c1b7479261c34845ebf7878

src/paxcounter.conf

@@ -17,7 +17,7 @@
 // Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting
 #define VENDORFILTER                    0       // set to 0 if you want to scan all devices, not filtering smartphone OUIs
 #define BLECOUNTER                      1       // set to 0 if you do not want to install the BLE sniffer
-#define WIFICOUNTER                     0       // set to 0 if you do not want to install the WIFI sniffer
+#define WIFICOUNTER                     1       // set to 0 if you do not want to install the WIFI sniffer
 
 // BLE scan parameters
 #define BLESCANTIME                     0       // [seconds] scan duration, 0 means infinite [default], see note below
@@ -89,7 +89,7 @@
 #define TIME_SYNC_INTERVAL_RETRY        10       // retry time sync after lost sync each .. minutes [default = 10], 0 means off
 #define TIME_SYNC_SAMPLES               1       // number of time requests for averaging, max. 255
 #define TIME_SYNC_CYCLE                 60      // delay between two time samples [seconds]
-#define TIME_SYNC_TIMEOUT               300     // timeout waiting for timeserver answer [seconds]
+#define TIME_SYNC_TIMEOUT               400     // timeout waiting for timeserver answer [seconds]
 #define TIME_SYNC_COMPILEDATE           0       // set to 1 to use compile date to initialize RTC after power outage [default = 0]
 
 // time zone, see https://github.com/JChristensen/Timezone/blob/master/examples/WorldClock/WorldClock.ino