Merge pull request #772 from cyberman54/development

Development

README.md

@@ -530,8 +530,8 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
 
 0x19 set sleep cycle
 
-	0 ... 255 device sleep cycle in seconds/2
-	e.g. 120 -> device sleeps 240 seconds after each send cycle [default = 0]
+	bytes 1..2 = device sleep cycle in seconds/10 (MSB)
+	e.g. {0x04, 0xB0} -> device sleeps 20 minutes after each send cycle [default = 0]
 
 0x20 load device configuration
 
@@ -579,10 +579,13 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
 			0x01 = timeNeedsSync (last sync failed)
 			0x02 = timeSet (synched)
 
-0x87 set time/date
+0x87 sync time/date
 
 	Device synchronizes it's time/date by calling the preconfigured time source.
 
+0x88 set time/date
+
+	bytes 1..4 = time/date to set in UTC epoch seconds (MSB, e.g. https://www.epochconverter.com/hex)
 	
 # License
 

include/globals.h

@@ -74,7 +74,7 @@ typedef struct __attribute__((packed)) {
   uint8_t countermode; // 0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed
   int16_t rssilimit;   // threshold for rssilimiter, negative value!
   uint8_t sendcycle;   // payload send cycle [seconds/2]
-  uint8_t sleepcycle;  // sleep cycle [seconds/2]
+  uint16_t sleepcycle; // sleep cycle [seconds/10]
   uint8_t wifichancycle; // wifi channel switch cycle [seconds/100]
   uint8_t blescantime;   // BLE scan cycle duration [seconds]
   uint8_t blescan;       // 0=disabled, 1=enabled

src/Node-RED/Timeserver.json

@@ -25,7 +25,7 @@
                 "t": "set",
                 "p": "payload.schedule",
                 "pt": "msg",
-                "to": "replace",
+                "to": "first",
                 "tot": "str"
             },
             {

src/configmanager.cpp

@@ -42,7 +42,7 @@ static void defaultConfig(configData_t *myconfig) {
       COUNTERMODE;                 // 0=cyclic, 1=cumulative, 2=cyclic confirmed
   myconfig->rssilimit = 0;         // threshold for rssilimiter, negative value!
   myconfig->sendcycle = SENDCYCLE; // payload send cycle [seconds/2]
-  myconfig->sleepcycle = SLEEPCYCLE; // sleep cycle [seconds/2]
+  myconfig->sleepcycle = SLEEPCYCLE; // sleep cycle [seconds/10]
   myconfig->wifichancycle =
       WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
   myconfig->blescantime =

src/irqhandler.cpp

@@ -90,9 +90,9 @@ void irqHandler(void *pvParameters) {
       // goto sleep if we have a sleep cycle
       if (cfg.sleepcycle)
 #ifdef HAS_BUTTON
-        enter_deepsleep(cfg.sleepcycle * 2, (gpio_num_t)HAS_BUTTON);
+        enter_deepsleep(cfg.sleepcycle * 10, (gpio_num_t)HAS_BUTTON);
 #else
-        enter_deepsleep(cfg.sleepcycle * 2);
+        enter_deepsleep(cfg.sleepcycle * 10);
 #endif
     }
   } // for

src/paxcounter_orig.conf

@@ -14,13 +14,13 @@
 
 // Payload send cycle and encoding
 #define SENDCYCLE                       30      // payload send cycle [seconds/2], 0 .. 255
-#define SLEEPCYCLE                      0       // sleep time after a send cycle [seconds/2], 0 .. 255; 0 means no sleep [default = 0]
+#define SLEEPCYCLE                      0       // sleep time after a send cycle [seconds/10], 0 .. 65535; 0 means no sleep [default = 0]
 #define PAYLOAD_ENCODER                 2       // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
 #define COUNTERMODE                     0       // 0=cyclic, 1=cumulative, 2=cyclic confirmed
 
 // MAC sniffing parameters
 #define MACFILTER                       1       // set to 0 if you want to scan all devices, 1 to scan only devices with random MACs (aka smartphones) [default = 1]
-#define BLECOUNTER                      0       // set to 0 if you do not want to install the BLE sniffer
+#define BLECOUNTER                      1       // set to 0 if you do not want to install the BLE sniffer
 #define WIFICOUNTER                     1       // set to 0 if you do not want to install the WIFI sniffer
 #define MAC_QUEUE_SIZE                  50      // size of MAC processing buffer (number of MACs) [default = 50]