v1.3.93

platformio.ini

@@ -40,6 +40,7 @@ lib_deps_rgbled =
     SmartLeds@>=1.1.3
 lib_deps_gps =
     TinyGPSPlus@>=1.0.2
+    Time@>=1.5
 build_flags = 
 ; we need build_flag for logging, otherwise we can't use ESP_LOGx in arduino framework
 ; ---> NOTE: For production run set DEBUG_LEVEL level to NONE! <---

src/battery.cpp

@@ -45,7 +45,7 @@ uint16_t read_voltage() {
 #ifdef BATT_FACTOR
   voltage *= BATT_FACTOR;
 #endif
-  ESP_LOGI(TAG, "Raw: %d / Voltage: %dmV", adc_reading, voltage);
+  ESP_LOGD(TAG, "Raw: %d / Voltage: %dmV", adc_reading, voltage);
   return voltage;
 }
 

src/globals.h

@@ -8,7 +8,7 @@
 #include <esp32-hal-log.h>
 
 // attn: increment version after modifications to configData_t truct!
-#define PROGVERSION "1.3.92" // use max 10 chars here!
+#define PROGVERSION "1.3.93" // use max 10 chars here!
 #define PROGNAME "PAXCNT"
 
 // std::set for unified array functions
@@ -44,6 +44,7 @@ extern uint16_t macs_total, macs_wifi, macs_ble, batt_voltage; // display values
 extern std::set<uint16_t> macs; // temp storage for MACs
 extern hw_timer_t *channelSwitch, *sendCycle;
 extern portMUX_TYPE timerMux;
+extern volatile int SendCycleTimerIRQ;
 
 #ifdef HAS_GPS
 #include "gps.h"

src/homecycle.cpp

@@ -0,0 +1,40 @@
+/* This routine is called by interrupt in regular intervals */
+/* Interval can be set in paxcounter.conf (HOMECYCLE)       */
+
+// Basic config
+#include "globals.h"
+#include "senddata.h"
+
+// Local logging tag
+static const char TAG[] = "main";
+
+// do all housekeeping
+void doHomework() {
+// read battery voltage into global variable
+#ifdef HAS_BATTERY_PROBE
+  batt_voltage = read_voltage();
+  ESP_LOGI(TAG, "Measured Voltage: %dmV", batt_voltage);
+#endif
+
+// sync time & date if we have valid gps time
+#ifdef HAS_GPS
+  if (gps.time.isValid()) {
+    setTime(gps.time.hour(), gps.time.minute(), gps.time.second(),
+            gps.date.day(), gps.date.month(), gps.date.year());
+    ESP_LOGI(TAG, "Time synced to %02d:%02d:%02d", hour(), minute(), second());
+  } else {
+    ESP_LOGI(TAG, "No valid GPS time");
+  }
+#endif
+
+  // check free memory
+  if (esp_get_minimum_free_heap_size() <= MEM_LOW) {
+    ESP_LOGW(TAG,
+             "Memory full, counter cleared (heap low water mark = %d Bytes / "
+             "free heap = %d bytes)",
+             esp_get_minimum_free_heap_size(), ESP.getFreeHeap());
+    senddata(COUNTERPORT); // send data before clearing counters
+    reset_counters();      // clear macs container and reset all counters
+    reset_salt();          // get new salt for salting hashes
+  }
+}

src/homecycle.h

@@ -0,0 +1,6 @@
+#ifndef _HOMECYCLE_H
+#define _HOMECYCLE_H
+
+void doHomework(void);
+
+#endif

src/main.cpp

@@ -35,11 +35,11 @@ uint16_t macs_total = 0, macs_wifi = 0, macs_ble = 0,
 
 // hardware timer for cyclic tasks
 hw_timer_t *channelSwitch = NULL, *displaytimer = NULL, *sendCycle = NULL,
-           *battCycle = NULL;
+           *homeCycle = NULL;
 
 // this variables will be changed in the ISR, and read in main loop
-static volatile int ButtonPressedIRQ = 0, ChannelTimerIRQ = 0,
+volatile int ButtonPressedIRQ = 0, ChannelTimerIRQ = 0, SendCycleTimerIRQ = 0,
-                    SendCycleTimerIRQ = 0, DisplayTimerIRQ = 0, BattReadIRQ = 0;
+             DisplayTimerIRQ = 0, HomeCycleIRQ = 0;
 
 portMUX_TYPE timerMux =
     portMUX_INITIALIZER_UNLOCKED; // sync main loop and ISR when modifying IRQ
@@ -113,6 +113,12 @@ void IRAM_ATTR SendCycleIRQ() {
   portEXIT_CRITICAL(&timerMux);
 }
 
+void IRAM_ATTR homeCycleIRQ() {
+  portENTER_CRITICAL(&timerMux);
+  HomeCycleIRQ++;
+  portEXIT_CRITICAL(&timerMux);
+}
+
 #ifdef HAS_DISPLAY
 void IRAM_ATTR DisplayIRQ() {
   portENTER_CRITICAL_ISR(&timerMux);
@@ -129,21 +135,14 @@ void updateDisplay() {
 }
 #endif
 
-#ifdef HAS_BATTERY_PROBE
+void checkHousekeeping() {
-void IRAM_ATTR BattCycleIRQ() {
+  if (HomeCycleIRQ) {
-  portENTER_CRITICAL(&timerMux);
-  BattReadIRQ++;
-  portEXIT_CRITICAL(&timerMux);
-}
-void readBattery() {
-  if (BattReadIRQ) {
     portENTER_CRITICAL(&timerMux);
-    BattReadIRQ = 0;
+    HomeCycleIRQ = 0;
     portEXIT_CRITICAL(&timerMux);
-    batt_voltage = read_voltage();
+    doHomework();
   }
 }
-#endif
 
 #ifdef HAS_BUTTON
 void IRAM_ATTR ButtonIRQ() { ButtonPressedIRQ++; }
@@ -193,43 +192,6 @@ uint64_t uptime() {
   return (uint64_t)high32 << 32 | low32;
 }
 
-void sendPayload() {
-
-  if (SendCycleTimerIRQ) {
-    portENTER_CRITICAL(&timerMux);
-    SendCycleTimerIRQ = 0;
-    portEXIT_CRITICAL(&timerMux);
-
-    // append counter data to payload
-    payload.reset();
-    payload.addCount(macs_wifi, cfg.blescan ? macs_ble : 0);
-    // append GPS data, if present
-
-#ifdef HAS_GPS
-    if ((cfg.gpsmode) && (gps.location.isValid())) {
-      gps_read();
-      payload.addGPS(gps_status);
-    }
-    // log NMEA status, useful for debugging GPS connection
-    ESP_LOGD(TAG, "GPS NMEA data: passed %d / failed: %d / with fix: %d",
-             gps.passedChecksum(), gps.failedChecksum(),
-             gps.sentencesWithFix());
-    // log GPS position if we have a fix
-    if ((cfg.gpsmode) && (gps.location.isValid())) {
-      gps_read();
-      ESP_LOGI(TAG, "lat=%.6f | lon=%.6f | %u Sats | HDOP=%.1f | Altitude=%um",
-               gps_status.latitude / (float)1e6,
-               gps_status.longitude / (float)1e6, gps_status.satellites,
-               gps_status.hdop / (float)100, gps_status.altitude);
-    } else {
-      ESP_LOGI(TAG, "No valid GPS position or GPS disabled");
-    }
-#endif
-
-    senddata(COUNTERPORT);
-  }
-} // sendPayload()
-
 /* begin Aruino SETUP
  * ------------------------------------------------------------ */
 
@@ -367,13 +329,11 @@ void setup() {
   timerAlarmWrite(sendCycle, cfg.sendcycle * 2 * 10000, true);
   timerAlarmEnable(sendCycle);
 
-  // setup battery read cycle trigger IRQ using esp32 hardware timer 3
+  // setup house keeping cycle trigger IRQ using esp32 hardware timer 3
-#ifdef HAS_BATTERY_PROBE
+  homeCycle = timerBegin(3, 8000, true);
-  battCycle = timerBegin(3, 8000, true);
+  timerAttachInterrupt(homeCycle, &homeCycleIRQ, true);
-  timerAttachInterrupt(battCycle, &BattCycleIRQ, true);
+  timerAlarmWrite(homeCycle, HOMECYCLE * 10000, true);
-  timerAlarmWrite(battCycle, BATTREADCYCLE * 10000, true);
+  timerAlarmEnable(homeCycle);
-  timerAlarmEnable(battCycle);
-#endif
 
 // show payload encoder
 #if PAYLOAD_ENCODER == 1
@@ -464,24 +424,12 @@ void loop() {
     readButton();
 #endif
 
-#ifdef HAS_BATTERY_PROBE
-    readBattery();
-#endif
-
 #ifdef HAS_DISPLAY
     updateDisplay();
 #endif
 
-    // check free memory
+    // check housekeeping cycle and to homework if expired
-    if (esp_get_minimum_free_heap_size() <= MEM_LOW) {
+    checkHousekeeping();
-      ESP_LOGI(TAG,
-               "Memory full, counter cleared (heap low water mark = %d Bytes / "
-               "free heap = %d bytes)",
-               esp_get_minimum_free_heap_size(), ESP.getFreeHeap());
-      senddata(COUNTERPORT); // send data before clearing counters
-      reset_counters();      // clear macs container and reset all counters
-      reset_salt();          // get new salt for salting hashes
-    }
 
     // check send cycle and send payload if cycle is expired
     sendPayload();

src/main.h

@@ -5,10 +5,13 @@
 #include "macsniff.h"
 #include "configmanager.h"
 #include "senddata.h"
+#include "homecycle.h"
 
 #include <esp_spi_flash.h>  // needed for reading ESP32 chip attributes
 #include <esp_event_loop.h> // needed for Wifi event handler
 
+#include <TimeLib.h>
+
 void reset_counters(void);
 void blink_LED(uint16_t set_color, uint16_t set_blinkduration);
 void led_loop(void);

src/paxcounter.conf

@@ -8,8 +8,8 @@
 #define VERBOSE                         1       // comment out to silence the device, for mute use build option
 
 // Payload send cycle and encoding
-#define SEND_SECS                       30      // payload send cycle [seconds/2] -> 240 sec.
+#define SEND_SECS                       30      // payload send cycle [seconds/2] -> 60 sec.
-#define PAYLOAD_ENCODER                 3       // payload encoder: 1=Plain, 2=Packed, 3=CayenneLPP dynamic, 4=CayenneLPP packed
+#define PAYLOAD_ENCODER                 1       // payload encoder: 1=Plain, 2=Packed, 3=CayenneLPP dynamic, 4=CayenneLPP packed
 
 // Set this to include BLE counting and vendor filter functions
 #define VENDORFILTER                    1       // comment out if you want to count things, not people
@@ -40,9 +40,6 @@
 #define	WIFI_CHANNEL_SWITCH_INTERVAL    50      // [seconds/100] -> 0,5 sec.
 
 // LoRa payload default parameters
-#define PAYLOAD_ENCODER                 1       // select payload encoder: 1=Plain [default], 2=Packed, 3=CayenneLPP dynmic, 4=CayenneLPP packed
-#define SEND_SECS                       30      // payload send cycle [seconds/2] -> 60 sec.
-
 #define MEM_LOW                         2048    // [Bytes] low memory threshold triggering a send cycle
 #define RETRANSMIT_RCMD                 5       // [seconds] wait time before retransmitting rcommand results
 #define PAYLOAD_BUFFER_SIZE             51      // maximum size of payload block per transmit
@@ -62,7 +59,7 @@
 // Some hardware settings
 #define RGBLUMINOSITY                   30      // RGB LED luminosity [default = 30%]
 #define DISPLAYREFRESH_MS               40      // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second
-#define BATTREADCYCLE                   60      // battery measuring cycle in seconds [default = 60 secs]
+#define HOMECYCLE                       60      // house keeping cycle in seconds [default = 60 secs]
 
 // LMIC settings
 // define hardware independent LMIC settings here, settings of standard library in /lmic/config.h will be ignored

src/senddata.cpp

@@ -32,3 +32,37 @@ void senddata(uint8_t port) {
   }
 
 } // senddata
+
+void sendPayload() {
+
+  if (SendCycleTimerIRQ) {
+    portENTER_CRITICAL(&timerMux);
+    SendCycleTimerIRQ = 0;
+    portEXIT_CRITICAL(&timerMux);
+
+    // append counter data to payload
+    payload.reset();
+    payload.addCount(macs_wifi, cfg.blescan ? macs_ble : 0);
+    // append GPS data, if present
+
+#ifdef HAS_GPS
+    // show NMEA data in debug mode, useful for debugging GPS on board
+    // connection
+    ESP_LOGD(TAG, "GPS NMEA data: passed %d / failed: %d / with fix: %d",
+             gps.passedChecksum(), gps.failedChecksum(),
+             gps.sentencesWithFix());
+    // log GPS position if we have a fix and gps data mode is enabled
+    if ((cfg.gpsmode) && (gps.location.isValid())) {
+      gps_read();
+      payload.addGPS(gps_status);
+      ESP_LOGD(TAG, "lat=%.6f | lon=%.6f | %u Sats | HDOP=%.1f | Altitude=%um",
+               gps_status.latitude / (float)1e6,
+               gps_status.longitude / (float)1e6, gps_status.satellites,
+               gps_status.hdop / (float)100, gps_status.altitude);
+    } else {
+      ESP_LOGD(TAG, "No valid GPS position or GPS data mode disabled");
+    }
+#endif
+    senddata(COUNTERPORT);
+  }
+} // sendpayload();

src/senddata.h

@@ -2,5 +2,6 @@
 #define _SENDDATA_H
 
 void senddata(uint8_t port);
+void sendPayload(void);
 
 #endif // _SENDDATA_H_