BME 680 support: payload converters addes

src/TTN/packed_decoder.js

@@ -41,6 +41,11 @@ function Decoder(bytes, port) {
         return decode(bytes, [uint8, uint8], ['rssi', 'beacon']);
     }
 
+    if (port === 7) {
+        // BME680 sensor data     
+        return decode(bytes, [temperature, uint16, humidity, uint16, uint16], ['temperature', 'pressure', 'humidity', 'gas', 'altitude']);
+    }
+
 }
 
 
@@ -132,7 +137,7 @@ var temperature = function (bytes) {
     if (isNegative) {
         t = -t;
     }
-    return t / 1e2;
+    return +(t / 100).toFixed(1);
 };
 temperature.BYTES = 2;
 
@@ -142,7 +147,7 @@ var humidity = function (bytes) {
     }
 
     var h = bytesToInt(bytes);
-    return h / 1e2;
+    return +(h / 100).toFixed(1);
 };
 humidity.BYTES = 2;
 

src/TTN/plain_decoder.js

@@ -40,6 +40,15 @@ function Decoder(bytes, port) {
     decoded.rssi = bytes[i++];
     decoded.beacon = bytes[i++];
   }
+  
+  if (port === 7) {
+    var i = 0;
+    decoded.temperature = ((bytes[i++] << 8) | bytes[i++]);
+    decoded.pressure = ((bytes[i++] << 8) | bytes[i++]);
+    decoded.humidity = ((bytes[i++] << 8) | bytes[i++]);
+    decoded.gas = ((bytes[i++] << 8) | bytes[i++]);
+    decoded.altitude = ((bytes[i++] << 8) | bytes[i++]);
+  }
 
   return decoded;
 

src/bme680read.cpp

@@ -30,9 +30,9 @@ bool bme_read(void) {
   bool ret = bme.performReading();
   if (ret) {
     // read current BME data and buffer in global struct
-    bme_status.temperature = (uint16_t)(bme.temperature * 100.0);
+    bme_status.temperature = bme.temperature;
     bme_status.pressure = (uint16_t)(bme.pressure / 100.0);
-    bme_status.humidity = (uint8_t)bme.humidity;
+    bme_status.humidity = bme.humidity;
     bme_status.gas_resistance = (uint16_t)(bme.gas_resistance / 1000.0);
     bme_status.altitude =
         (uint16_t)(bme.readAltitude(SEALEVELPRESSURE_HPA / 1000.0));

src/payload.cpp

@@ -95,11 +95,12 @@ void PayloadConvert::addGPS(gpsStatus_t value) {
 
 void PayloadConvert::addBME(bmeStatus_t value) {
 #ifdef HAS_BME
-  buffer[cursor++] = highByte(value.temperature);
-  buffer[cursor++] = lowByte(value.temperature);
+  buffer[cursor++] = highByte((int16_t)value.temperature);
+  buffer[cursor++] = lowByte((int16_t)value.temperature);
   buffer[cursor++] = highByte(value.pressure);
   buffer[cursor++] = lowByte(value.pressure);
-  buffer[cursor++] = (byte)(value.humidity);
+  buffer[cursor++] = highByte((uint16_t)value.humidity);
+  buffer[cursor++] = lowByte((uint16_t)value.humidity);
   buffer[cursor++] = highByte(value.gas_resistance);
   buffer[cursor++] = lowByte(value.gas_resistance);
   buffer[cursor++] = highByte(value.altitude);
@@ -166,9 +167,9 @@ void PayloadConvert::addGPS(gpsStatus_t value) {
 
 void PayloadConvert::addBME(bmeStatus_t value) {
 #ifdef HAS_BME
-  writeUint16(value.temperature);
+  writeTemperature(value.temperature);
   writeUint16(value.pressure);
-  writeUint8(value.humidity);
+  writeHumidity(value.humidity);
   writeUint16(value.gas_resistance);
   writeUint16(value.altitude);
 #endif
@@ -250,13 +251,13 @@ void PayloadConvert::addCount(uint16_t value1, uint16_t value2) {
 #if (PAYLOAD_ENCODER == 3)
   buffer[cursor++] = LPP_COUNT_WIFI_CHANNEL;
 #endif
-  buffer[cursor++] = LPP_LUMINOSITY; // workaround, type meter not found?
+  buffer[cursor++] = LPP_TEMPERATURE;
   buffer[cursor++] = highByte(value1);
   buffer[cursor++] = lowByte(value1);
 #if (PAYLOAD_ENCODER == 3)
   buffer[cursor++] = LPP_COUNT_BLE_CHANNEL;
 #endif
-  buffer[cursor++] = LPP_LUMINOSITY; // workaround, type meter not found?
+  buffer[cursor++] = LPP_HUMIDITY;
   buffer[cursor++] = highByte(value2);
   buffer[cursor++] = lowByte(value2);
 }
@@ -293,9 +294,10 @@ void PayloadConvert::addStatus(uint16_t voltage, uint64_t uptime, float celsius,
   buffer[cursor++] = LPP_ANALOG_INPUT;
   buffer[cursor++] = highByte(volt);
   buffer[cursor++] = lowByte(volt);
-#endif
+#endif // HAS_BATTERY_PROBE
+
 #if (PAYLOAD_ENCODER == 3)
-  buffer[cursor++] = LPP_TEMP_CHANNEL;
+  buffer[cursor++] = LPP_TEMPERATURE_CHANNEL;
 #endif
   buffer[cursor++] = LPP_TEMPERATURE;
   buffer[cursor++] = highByte(temp);
@@ -316,11 +318,39 @@ void PayloadConvert::addGPS(gpsStatus_t value) {
   buffer[cursor++] = (byte)((lat & 0x0000FF));
   buffer[cursor++] = (byte)((lon & 0xFF0000) >> 16);
   buffer[cursor++] = (byte)((lon & 0x00FF00) >> 8);
-  buffer[cursor++] = (byte)((lon & 0x0000FF));
+  buffer[cursor++] = (byte)(lon & 0x0000FF);
   buffer[cursor++] = (byte)((alt & 0xFF0000) >> 16);
   buffer[cursor++] = (byte)((alt & 0x00FF00) >> 8);
-  buffer[cursor++] = (byte)((alt & 0x0000FF));
+  buffer[cursor++] = (byte)(alt & 0x0000FF);
+#endif // HAS_GPS
+}
+
+void PayloadConvert::addBME(bmeStatus_t value) {
+#ifdef HAS_BME
+#if (PAYLOAD_ENCODER == 3)
+  buffer[cursor++] = LPP_TEMPERATURE_CHANNEL;
 #endif
+  buffer[cursor++] = LPP_TEMPERATURE;
+  buffer[cursor++] = highByte((int16_t)value.temperature);
+  buffer[cursor++] = lowByte((int16_t)value.temperature);
+#if (PAYLOAD_ENCODER == 3)
+  buffer[cursor++] = LPP_BAROMETER_CHANNEL;
+#endif
+  buffer[cursor++] = LPP_BAROMETER;
+  buffer[cursor++] = highByte(value.pressure);
+  buffer[cursor++] = lowByte(value.pressure);
+#if (PAYLOAD_ENCODER == 3)
+  buffer[cursor++] = LPP_HUMIDITY_CHANNEL;
+#endif
+  buffer[cursor++] = LPP_HUMIDITY;
+  buffer[cursor++] = (byte)value.humidity;
+#if (PAYLOAD_ENCODER == 3)
+  buffer[cursor++] = LPP_GAS_CHANNEL;
+#endif
+  buffer[cursor++] = LPP_ANALOG_INPUT;
+  buffer[cursor++] = highByte(value.gas_resistance);
+  buffer[cursor++] = lowByte(value.gas_resistance);
+#endif // HAS_BME
 }
 
 void PayloadConvert::addButton(uint8_t value) {
@@ -330,7 +360,7 @@ void PayloadConvert::addButton(uint8_t value) {
 #endif
   buffer[cursor++] = LPP_DIGITAL_INPUT;
   buffer[cursor++] = value;
-#endif
+#endif // HAS_BUTTON
 }
 
 #else