remove unused ENS/CWA code

README.md

@@ -216,15 +216,6 @@ Paxcounter can be used to sync a wall clock which has a DCF77 or IF482 time tele
 
 This describes how to set up a mobile PaxCounter:<br> Follow all steps so far for preparing the device, selecting the packed payload format. In `paxcounter.conf` set PAYLOAD_OPENSENSEBOX to 1. Register a new sensebox on https://opensensemap.org/. In the sensor configuration select "TheThingsNetwork" and set decoding profile to "LoRa serialization". Enter your TTN Application and Device ID. Setup decoding option using `[{"decoder":"latLng"},{"decoder":"uint16",sensor_id":"yoursensorid"}]` 
 
-# Covid-19 Exposure Notification System beacon detection (currently NOT working with v3.0.x, use v2.4.x for this feature)
-
-Bluetooth low energy service UUID 0xFD6F, used by Google/Apple COVID-19 Exposure Notification System, can be monitored and counted. By comparing with the total number of observed devices this <A HREF="https://linux-fuer-wi.blogspot.com/2020/10/suche-die-zahl-64879.html">gives an indication</A> how many people staying in proximity are using Apps for tracing COVID-19 exposures, e.g. in Germany the "Corona Warn App". To achive best results with this funcion, use following settings in `paxcounter.conf`:
-
-	#define COUNT_ENS		1	// enable ENS monitoring function
-	#define BLECOUNTER		1	// enable bluetooth sniffing
-	#define WIFICOUNTER		0	// disable wifi sniffing (improves BLE scan speed)
-	#define HAS_SENSOR_1		1	// optional, in board's hal file: transmit ENS counter data to server
-
 # SD-card
 
 Data can be stored on an SD-card if one is availabe. Simply choose the file in src/hal and add the following lines to your hal-file:
@@ -384,7 +375,7 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
 
 **Ports #10, #11, #12:** User sensor data
 
-	Format is specified by user in function `sensor_read(uint8_t sensor)`, see `src/sensor.cpp`. Port #10 is also used for ENS counter (2 bytes = 16 bit), if ENS is compiled AND ENS data transfer is enabled
+	Format is specified by user in function `sensor_read(uint8_t sensor)`, see `src/sensor.cpp`.
 
 # Remote control
 
@@ -504,7 +495,7 @@ Send for example `83` `86` as Downlink on Port 2 to get battery status and time/
         0x02 = RESERVED_DATA
         0x04 = MEMS_DATA
         0x08 = GPS_DATA
-        0x10 = SENSOR_1_DATA (also ENS counter)
+        0x10 = SENSOR_1_DATA
         0x20 = SENSOR_2_DATA
         0x40 = SENSOR_3_DATA
         0x80 = BATT_DATA
@@ -525,10 +516,9 @@ Send for example `83` `86` as Downlink on Port 2 to get battery status and time/
 	0 = disabled
 	1 = enabled [default]
     
-0x18 set ENS counter on/off
+0x18 reserved
 
-    0 = disabled [default]
+    unused, does nothing
-    1 = enabled
 
 0x19 set sleep cycle
 
@@ -622,4 +612,4 @@ Thanks to
 - [terrillmoore](https://github.com/mcci-catena) for maintaining the LMIC for arduino LoRaWAN stack
 - [sbamueller](https://github.com/sbamueller) for writing the tutorial in Make Magazine
 - [Stefan](https://github.com/nerdyscout) for paxcounter opensensebox integration
-- [August Quint](https://github.com/AugustQu) for adding SD card data logger, SDS011 and ENS support
+- [August Quint](https://github.com/AugustQu) for adding SD card data logger and SDS011 support

include/corona.h

@@ -1,16 +0,0 @@
-#ifndef _CORONA_h
-#define _CORONA_H
-
-// inspired by https://github.com/kmetz/BLEExposureNotificationBeeper
-// (c) by Kaspar Metz
-// modified for use in the Paxcounter by AQ
-
-#include "globals.h"
-#include <map>
-
-bool cwa_init(void);
-void cwa_mac_add(uint16_t hashedmac);
-void cwa_clear(void);
-uint16_t cwa_report(void);
-
-#endif

include/display.h

@@ -6,10 +6,6 @@
 #include "qrcode.h"
 #include "power.h"
 
-#if (COUNT_ENS)
-#include "corona.h"
-#endif
-
 #if (HAS_DISPLAY) == 1
 #include <OneBitDisplay.h>
 #elif (HAS_DISPLAY) == 2

include/globals.h

@@ -71,7 +71,6 @@ typedef struct __attribute__((packed)) {
   uint8_t wifiant;       // 0=internal, 1=external (for LoPy/LoPy4)
   uint8_t rgblum;        // RGB Led luminosity (0..100%)
   uint8_t payloadmask;   // bitswitches for payload data
-  uint8_t enscount;      // 0=disabled 1= enabled
 
 #ifdef HAS_BME680
   uint8_t

include/main.h

@@ -18,7 +18,6 @@
 #include "sensor.h"
 #include "lorawan.h"
 #include "timekeeper.h"
-#include "corona.h"
 #include "boot.h"
 #include "libpax_helpers.h"
 #include "power.h"

include/senddata.h

@@ -10,10 +10,6 @@
 #include "display.h"
 #include "sdcard.h"
 
-#if (COUNT_ENS)
-#include "corona.h"
-#endif
-
 extern struct count_payload_t count_from_libpax;
 
 void SendPayload(uint8_t port);

src/TTN/packed_decoder.js

@@ -84,11 +84,6 @@ function Decoder(bytes, port) {
         }
     }
 
-    if (port === 10) {
-        // ENS count      
-        return decode(bytes, [uint16], ['ens']);
-    }
-
 }
 
 

src/TTNv3/packed_decodeUplink.js

@@ -91,11 +91,6 @@ function decodeUplink(input) {
         }
     }
     
-    if (input.fPort === 10) {
-        // ENS count      
-        data = decode(input.bytes, [uint16], ['ens']);
-    }
-    
     data.bytes = input.bytes; // comment out if you do not want to include the original payload
     data.port = input.fPort; // comment out if you do not want to inlude the port
 

src/TTNv3/plain_decodeUplink.js

@@ -84,13 +84,6 @@ function decodeUplink(input) {
         }
     }
 
-    if (input.fPort === 10) {
-        var i = 0;
-        if (input.bytes.length >= 2) {
-            data.ens = (input.bytes[i++] << 8) | input.bytes[i++];
-        }
-    }
-
     if (data.hdop) {
         data.hdop /= 100;
         data.latitude /= 1000000;

src/configmanager.cpp

@@ -57,7 +57,6 @@ static void defaultConfig(configData_t *myconfig) {
   myconfig->wifiant = 0;            // 0=internal, 1=external (for LoPy/LoPy4)
   myconfig->rgblum = RGBLUMINOSITY; // RGB Led luminosity (0..100%)
   myconfig->payloadmask = PAYLOADMASK; // payloads as defined in default
-  myconfig->enscount = COUNT_ENS;      // 0=disabled, 1=enabled
 
 #ifdef HAS_BME680
   // initial BSEC state for BME680 sensor

src/corona.cpp

@@ -1,54 +0,0 @@
-// routines for counting the number of devices which advertise Exposure
-// Notification Service e.g. "Corona Warn App" in Germany
-
-// copied from https://github.com/kmetz/BLEExposureNotificationBeeper
-// (c) by Kaspar Metz
-// modified for use in the Paxcounter by AQ
-
-#if (COUNT_ENS) && !(BLECOUNTER)
-#warning ENS-Counter needs Bluetooth, but Bluetooth compile option is disabled
-#endif
-
-#if (COUNT_ENS)
-
-// Local logging tag
-static const char TAG[] = __FILE__;
-
-#define BT_BD_ADDR_HEX(addr)                                                   \
-  addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
-
-#include "corona.h"
-
-// When to forget old senders ** currently not used **
-#define FORGET_AFTER_MINUTES 2
-
-// array of timestamps for seen notifiers: hash -> timestamp[ms]
-static std::map<uint16_t, unsigned long> cwaSeenNotifiers;
-
-// Remove notifiers last seen over FORGET_AFTER_MINUTES ago.
-void cwa_clear() {
-#ifdef VERBOSE
-  ESP_LOGV(TAG, "CWA: forget old notifier: %d", cwaSeenNotifiers.size());
-  for (auto const &notifier : cwaSeenNotifiers) {
-    ESP_LOGD(TAG, "CWA forget <%04X>", notifier.first);
-    //    }
-  }
-#endif
-  // clear everything, otherwise we would count the same device again, as in the
-  // next cycle it likely will advertise with a different hash-value
-  cwaSeenNotifiers.clear();
-}
-
-// return the total number of devices seen advertising ENS
-uint16_t cwa_report(void) { return cwaSeenNotifiers.size(); }
-
-bool cwa_init(void) {
-  ESP_LOGD(TAG, "init BLE-scanner for ENS");
-  return true;
-}
-
-void cwa_mac_add(uint16_t hashedmac) {
-  cwaSeenNotifiers[hashedmac] = millis(); // hash last seen at ....
-}
-
-#endif

src/display.cpp

@@ -268,12 +268,7 @@ void dp_drawPage(bool nextpage) {
     else
       dp_printf("WIFI:off");
     if (cfg.blescan)
-#if (COUNT_ENS)
+      dp_printf("BLTH:%-5d", count_from_libpax.ble_count);
-      if (cfg.enscount)
-        dp_printf(" CWA:%-5d", cwa_report());
-      else
-#endif
-        dp_printf("BLTH:%-5d", count_from_libpax.ble_count);
     else
       dp_printf(" BLTH:off");
 #elif ((WIFICOUNTER) && (!BLECOUNTER))
@@ -284,12 +279,7 @@ void dp_drawPage(bool nextpage) {
 #elif ((!WIFICOUNTER) && (BLECOUNTER))
     if (cfg.blescan)
       dp_printf("BLTH:%-5d", count_from_libpax.ble_count);
-#if (COUNT_ENS)
+    dp_printf("BLTH:off");
-    if (cfg.enscount)
-      dp_printf("(CWA:%d)", cwa_report());
-    else
-#endif
-      dp_printf("BLTH:off");
 #else
     dp_printf("Sniffer disabled");
 #endif

src/lorawan-devices-repo/vendor/opensource/esp32-paxcounter-packed.js

@@ -91,11 +91,6 @@ function decodeUplink(input) {
         }
     }
   
-    if (input.fPort === 10) {
-        // ENS count      
-        data = decode(input.bytes, [uint16], ['ens']);
-    }
-    
     data.bytes = input.bytes; // comment out if you do not want to include the original payload
     data.port = input.fPort; // comment out if you do not want to inlude the port
 

src/main.cpp

@@ -337,15 +337,9 @@ void setup() {
 // initialize sensors
 #if (HAS_SENSORS)
 #if (HAS_SENSOR_1)
-#if (COUNT_ENS)
-  ESP_LOGI(TAG, "init CWA-counter");
-  if (cwa_init())
-    strcat_P(features, " CWA");
-#else
   strcat_P(features, " SENS(1)");
   sensor_init();
 #endif
-#endif
 #if (HAS_SENSOR_2)
   strcat_P(features, " SENS(2)");
   sensor_init();

src/paxcounter_orig.conf

@@ -27,10 +27,6 @@
 #define BLESCANWINDOW                   80      // [milliseconds] scan window, see below, 3 .. 10240, default 80ms
 #define BLESCANINTERVAL                 80      // [illiseconds] scan interval, see below, 3 .. 10240, default 80ms = 100% duty cycle
 
-// Corona Exposure Notification Service(ENS) counter
-#define COUNT_ENS                       0       // count found number of devices which advertise Exposure Notification Service
-                                                // set to 1 if you want to enable this function [default=0]
-
 /* Note: guide for setting bluetooth parameters
 *
 * |< Scan Window >       |< Scan Window >       | ... |< Scan Window >       |

src/rcommand.cpp

@@ -397,15 +397,6 @@ void set_flush(uint8_t val[]) {
   // used to open receive window on LoRaWAN class a nodes
 };
 
-void set_enscount(uint8_t val[]) {
-  ESP_LOGI(TAG, "Remote command: set ENS_COUNT to %s", val[0] ? "on" : "off");
-  cfg.enscount = val[0] ? 1 : 0;
-  if (val[0])
-    cfg.payloadmask |= (uint8_t)SENSOR1_DATA;
-  else
-    cfg.payloadmask &= (uint8_t)~SENSOR1_DATA;
-}
-
 void set_loadconfig(uint8_t val[]) {
   ESP_LOGI(TAG, "Remote command: load config from NVRAM");
   loadConfig();
@@ -430,7 +421,7 @@ static const cmd_t table[] = {
     {0x10, set_rgblum, 1},        {0x13, set_sensor, 2},
     {0x14, set_payloadmask, 1},   {0x15, set_bme, 1},
     {0x16, set_batt, 1},          {0x17, set_wifiscan, 1},
-    {0x18, set_enscount, 1},      {0x19, set_sleepcycle, 2},
+    {0x18, set_flush, 0},         {0x19, set_sleepcycle, 2},
     {0x20, set_loadconfig, 0},    {0x21, set_saveconfig, 0},
     {0x80, get_config, 0},        {0x81, get_status, 0},
     {0x83, get_batt, 0},          {0x84, get_gps, 0},

src/senddata.cpp

@@ -159,10 +159,6 @@ void sendData() {
         payload.reset();
         payload.addSensor(sensor_read(1));
         SendPayload(SENSOR1PORT);
-#if (COUNT_ENS)
-        if (cfg.countermode != 1)
-          cwa_clear();
-#endif
         break;
 #endif
 #if (HAS_SENSOR_2)

src/sensor.cpp

@@ -2,12 +2,6 @@
 #include "globals.h"
 #include "sensor.h"
 
-#if (COUNT_ENS)
-#include "payload.h"
-#include "corona.h"
-extern PayloadConvert payload;
-#endif
-
 // Local logging tag
 static const char TAG[] = __FILE__;
 
@@ -53,16 +47,10 @@ uint8_t *sensor_read(uint8_t sensor) {
   case 1:
 
     // insert user specific sensor data frames here
-    // note: Sensor1 fields are used for ENS count, if ENS detection enabled
-#if (COUNT_ENS)
-    if (cfg.enscount)
-      payload.addCount(cwa_report(), MAC_SNIFF_BLE_ENS);
-#else
     buf[0] = length;
     buf[1] = 0x01;
     buf[2] = 0x02;
     buf[3] = 0x03;
-#endif
     break;
   case 2: