DigitalInfinity/ESP32-PaxCounter
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

created paxcounter_orig.conf and platformio_orig.ini, added platformio.ini and paxcounter.conf to .gitignore and update Readme.md

Browse Source
This commit is contained in:
Chrisotph Schultz committed 2020-09-27 23:15:50 +02:00
1 parent 6d3222a7eb
commit db281e11f9
6 files changed
+360 -5
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

src/loarconf_sample_h
+88
View File
@@ -0,0 +1,88 @@
#ifndef __LORACONF_H__
#define __LORACONF_H__
#if (HAS_LORA)
/************************************************************
* LMIC LoRaWAN configuration
*
* Read the values from TTN console (or whatever applies), insert them here,
* and rename this file to src/loraconf.h
*
* You can configure OTAA or ABP Activation. In order to use ABP, uncomment
* (enable) the following line, but you should only do so, if you have good
* reasons for not using OTAA.
*
*************************************************************/
//#define LORA_ABP
#ifndef LORA_ABP
/************************************************************
* OTAA configuration
*
* DEVEUI, APPEUI and APPKEY should all be specified in MSB format as
* displayed in TTN console, so you can cut & paste from there. This is different
* from standard LMIC-Arduino which expects DEVEUI and APPEUI in LSB format.
* For TTN, APPEUI in MSB format always starts with 0x70, 0xB3, 0xD5.
* Set your DEVEUI here, if your device has have a fixed one.
* If you leave this untouched, then the DEVEUI will be derived from device's
* MAC adress during startup and will be displayed on device's screen as well as
* on serial console, if you set 'verbose 1' in paxcounter.conf and
* 'debug_level 3' in platformio.ini.
* If using a board with Microchip 24AA02E64 Uinique ID for deveui, the DEVEUI
* will be overwritten by the one contained in the Microchip module.
*
************************************************************/
static const u1_t DEVEUI[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u1_t APPEUI[8] = {0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u1_t APPKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
#endif
#ifdef LORA_ABP
/************************************************************
* ABP configuration (for development)
*
* Get your
* - Network Session Key (NWKSKEY)
* - App Session Key and your (APPSKEY)
* - Device Address (DEVADDR)
* from e.g. TTN console and replace the example values below.
*
* NOTE: Use MSB format (as displayed in TTN console, so you can cut & paste
* from there)
*
* NOTE: You may also need to adjust lorawan_abp.cpp in order to configure
* different channels and data rate channels to match your country's regulations
* and your network's settings.
*
************************************************************/
// ID of LoRaAlliance assigned Network (for a list, see e.g. here
// https://www.thethingsnetwork.org/docs/lorawan/prefix-assignments.html)
static const u1_t NETID = 0x13; // TTN
static const u1_t NWKSKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00};
static const u1_t APPSKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00};
static const u4_t DEVADDR =
0x00000000; // <-- Change this address for every node!
// set additional ABP parameters in loraconf_abp.cpp
void setABPParameters();
#endif
#endif // HAS_LORA
#endif // __LORACONF_H__
src/ota_sample.conf
+8
View File
@@ -0,0 +1,8 @@
[ota]
OTA_WIFI_SSID = MyHomeWifi
OTA_WIFI_PASS = FooBar42!
[bintray]
BINTRAY_USER = MyBintrayUser
BINTRAY_REPO = MyBintrayRepo
BINTRAY_API_TOKEN = 3894a7a51d70c6523c1b7479261c34845ebf7878
src/paxcounter_orig.conf
+122
View File
@@ -0,0 +1,122 @@
// clang-format off
// ----- Paxcounter user config file ------
//
// --> adapt to your needs and use case <--
//
// Note: After editing, before "build", use "clean" button in PlatformIO!
// Verbose enables additional serial debug output
#define VERBOSE 1 // set to 0 to silence the device, for mute use build option
// Payload send cycle and encoding
#define SENDCYCLE 30 // payload send cycle [seconds/2], 0 .. 255
#define PAYLOAD_ENCODER 2 // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
#define COUNTERMODE 1 // 0=cyclic, 1=cumulative, 2=cyclic confirmed
// Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting
#define VENDORFILTER 0 // set to 0 if you want to scan all devices, not filtering smartphone OUIs
#define BLECOUNTER 1 // set to 0 if you do not want to install the BLE sniffer
#define WIFICOUNTER 1 // set to 0 if you do not want to install the WIFI sniffer
// BLE scan parameters
#define BLESCANTIME 0 // [seconds] scan duration, 0 means infinite [default], see note below
#define BLESCANWINDOW 80 // [milliseconds] scan window, see below, 3 .. 10240, default 80ms
#define BLESCANINTERVAL 80 // [illiseconds] scan interval, see below, 3 .. 10240, default 80ms = 100% duty cycle
// Corona Exposure Notification Service(ENS) counter
#define COUNT_ENS 1 // count found number of devices which advertise Exposure Notification Service
// set to 0 if you do not want to enable this function
// for additional sensors (added by some user)
#define HAS_SENSOR_1 1 // set to 1 if you want to transmit CWA counter
#define HAS_SENSOR_2 0 // not used
#define HAS_SENSOR_3 0 // not used
#define HAS_SENSORS (HAS_SENSOR_1 || HAS_SENSOR_2 || HAS_SENSOR_3) // to simplify things
/* Note: guide for setting bluetooth parameters
*
* |< Scan Window > |< Scan Window > | ... |< Scan Window > |
* |< Scan Interval >|< Scan Interval >| ... |< Scan Interval >|
* |< Scan duration >|
*
* Scan duration sets how long scanning should be going on, before starting a new scan cycle. 0 means infinite (default).
* Scan window sets how much of the interval should be occupied by scanning. Should be >= BLESCANINTERVAL.
* Scan interval is how long scanning should be done on each channel. BLE uses 3 channels for advertising.
* -> Adjust these values with power consumption in mind if power is limited.
* -> Scan interval can be changed during runtime by remote comammand.
*/
// WiFi scan parameters
#define WIFI_CHANNEL_MIN 1 // start channel number where scan begings
#define WIFI_CHANNEL_MAX 13 // total channel number to scan
#define WIFI_MY_COUNTRY "EU" // select locale for Wifi RF settings
#define WIFI_CHANNEL_SWITCH_INTERVAL 50 // [seconds/100] -> 0,5 sec.
// LoRa payload default parameters
#define MEM_LOW 2048 // [Bytes] low memory threshold triggering a send cycle
#define RETRANSMIT_RCMD 5 // [seconds] wait time before retransmitting rcommand results
#define PAYLOAD_BUFFER_SIZE 51 // maximum size of payload block per transmit
#define PAYLOAD_OPENSENSEBOX 0 // send payload compatible to sensebox.de (swap geo position and pax data)
#define LORADRDEFAULT 5 // 0 .. 15, LoRaWAN datarate, according to regional LoRaWAN specs [default = 5]
#define LORATXPOWDEFAULT 14 // 0 .. 255, LoRaWAN TX power in dBm [default = 14]
#define MAXLORARETRY 500 // maximum count of TX retries if LoRa busy
#define SEND_QUEUE_SIZE 10 // maximum number of messages in payload send queue [1 = no queue]
// Hardware settings
#define RGBLUMINOSITY 30 // RGB LED luminosity [default = 30%]
#define DISPLAYREFRESH_MS 40 // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second
#define DISPLAYCONTRAST 80 // 0 .. 255, OLED display contrast [default = 80]
#define DISPLAYCYCLE 3 // Auto page flip delay in sec [default = 2] for devices without button
#define HOMECYCLE 30 // house keeping cycle in seconds [default = 30 secs]
// Settings for BME680 environmental sensor
#define BME_TEMP_OFFSET 5.0f // Offset sensor on chip temp <-> ambient temp [default = 5°C]
#define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // update every 360 minutes = 4 times a day
#define BMECYCLE 1 // bme sensor read cycle in seconds [default = 1 secs]
// OTA settings
#define USE_OTA 1 // set to 0 to disable OTA update
#define WIFI_MAX_TRY 5 // maximum number of wifi connect attempts for OTA update [default = 20]
#define OTA_MAX_TRY 5 // maximum number of attempts for OTA download and write to flash [default = 3]
#define OTA_MIN_BATT 50 // minimum battery level for OTA [percent]
#define RESPONSE_TIMEOUT_MS 60000 // firmware binary server connection timeout [milliseconds]
// settings for syncing time of node with a time source (network / gps / rtc / timeserver)
#define TIME_SYNC_LORAWAN 1 // set to 1 to use LORA network as time source, 0 means off [default = 1]
#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
#define TIME_SYNC_INTERVAL 60 // sync time attempt each .. minutes from time source [default = 60], 0 means off
#define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off
#define TIME_SYNC_SAMPLES 1 // number of time requests for averaging, max. 255
#define TIME_SYNC_CYCLE 60 // delay between two time samples [seconds]
#define TIME_SYNC_TIMEOUT 400 // timeout waiting for timeserver answer [seconds]
#define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0]
// time zone, see https://github.com/JChristensen/Timezone/blob/master/examples/WorldClock/WorldClock.ino
#define DAYLIGHT_TIME {"CEST", Last, Sun, Mar, 2, 120} // Central European Summer Time
#define STANDARD_TIME {"CET ", Last, Sun, Oct, 3, 60} // Central European Standard Time
// Ports on which the device sends and listenes on LoRaWAN and SPI
#define COUNTERPORT 1 // counts
#define MACPORT 0 // network commands
#define RCMDPORT 2 // remote commands
#define STATUSPORT 2 // remote command results
#define CONFIGPORT 3 // config query results
#define GPSPORT 4 // gps - NOTE: set to 1 to send combined GPS+COUNTERPORT payload
#define BUTTONPORT 5 // button pressed signal
#define BEACONPORT 6 // beacon alarms
#define BMEPORT 7 // BME680 sensor
#define BATTPORT 8 // battery voltage
#define TIMEPORT 9 // time query and response
#define SENSOR1PORT 10 // user sensor #1
#define SENSOR2PORT 11 // user sensor #2
#define SENSOR3PORT 12 // user sensor #3
// Cayenne LPP Ports, see https://community.mydevices.com/t/cayenne-lpp-2-0/7510
#define CAYENNE_LPP1 1 // dynamic sensor payload (LPP 1.0)
#define CAYENNE_LPP2 2 // packed sensor payload (LPP 2.0)
#define CAYENNE_GPS 3 // full scale GPS payload
#define CAYENNE_ACTUATOR 10 // actuator commands
#define CAYENNE_DEVICECONFIG 11 // device period configuration
#define CAYENNE_SENSORREAD 13 // sensor period configuration
#define CAYENNE_SENSORENABLE 14 // sensor enable configuration