display.cpp: fix field width BME

This commit is contained in:
Verkehrsrot 2019-07-25 23:20:42 +02:00
parent 837988081e
commit da02e67c8f
4 changed files with 11 additions and 11 deletions

View File

@ -7,7 +7,7 @@
; ---> SELECT THE TARGET PLATFORM HERE! <--- ; ---> SELECT THE TARGET PLATFORM HERE! <---
[board] [board]
halfile = generic.h ;halfile = generic.h
;halfile = ebox.h ;halfile = ebox.h
;halfile = eboxtube.h ;halfile = eboxtube.h
;halfile = ecopower.h ;halfile = ecopower.h
@ -18,7 +18,7 @@ halfile = generic.h
;halfile = ttgov21old.h ;halfile = ttgov21old.h
;halfile = ttgov21new.h ;halfile = ttgov21new.h
;halfile = ttgofox.h ;halfile = ttgofox.h
;halfile = ttgobeam.h halfile = ttgobeam.h
;halfile = fipy.h ;halfile = fipy.h
;halfile = lopy.h ;halfile = lopy.h
;halfile = lopy4.h ;halfile = lopy4.h
@ -40,7 +40,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common] [common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c" ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 1.7.82 release_version = 1.7.841
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running! ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3 debug_level = 3
@ -81,7 +81,7 @@ lib_deps_all =
build_flags_basic = build_flags_basic =
-include "src/hal/${board.halfile}" -include "src/hal/${board.halfile}"
-include "src/paxcounter.conf" -include "src/paxcounter.conf"
-w ;-w
'-DCORE_DEBUG_LEVEL=${common.debug_level}' '-DCORE_DEBUG_LEVEL=${common.debug_level}'
'-DLOG_LOCAL_LEVEL=${common.debug_level}' '-DLOG_LOCAL_LEVEL=${common.debug_level}'
'-DPROGVERSION="${common.release_version}"' '-DPROGVERSION="${common.release_version}"'

View File

@ -338,16 +338,16 @@ void draw_page(time_t t, uint8_t page) {
#if (HAS_BME) #if (HAS_BME)
// line 2-3: Temp // line 2-3: Temp
snprintf(buff, sizeof(buff), "TMP:%-4.1f", bme_status.temperature); snprintf(buff, sizeof(buff), "TMP:%-2.1f", bme_status.temperature);
u8x8.draw2x2String(0, 2, buff); u8x8.draw2x2String(0, 2, buff);
// line 4-5: Hum // line 4-5: Hum
snprintf(buff, sizeof(buff), "HUM:%-4.1f", bme_status.humidity); snprintf(buff, sizeof(buff), "HUM:%-2.1f", bme_status.humidity);
u8x8.draw2x2String(0, 4, buff); u8x8.draw2x2String(0, 4, buff);
#ifdef HAS_BME680 #ifdef HAS_BME680
// line 6-7: IAQ // line 6-7: IAQ
snprintf(buff, sizeof(buff), "IAQ:%-4.1f", bme_status.iaq); snprintf(buff, sizeof(buff), "IAQ:%-3.0f", bme_status.iaq);
u8x8.draw2x2String(0, 6, buff); u8x8.draw2x2String(0, 6, buff);
#endif #endif

View File

@ -29,9 +29,9 @@
// enable only if device has these sensors, otherwise comment these lines // enable only if device has these sensors, otherwise comment these lines
// BME680 sensor on I2C bus // BME680 sensor on I2C bus
//#define HAS_BME 1 // Enable BME sensors in general #define HAS_BME 1 // Enable BME sensors in general
//#define HAS_BME680 SDA, SCL #define HAS_BME680 SDA, SCL
//#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !! #define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
// display (if connected) // display (if connected)
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C

View File

@ -71,7 +71,7 @@
#define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off #define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off
#define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0] #define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0]
#define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0] #define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0]
#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] #define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
// settings for syncing time with timeserver applications // settings for syncing time with timeserver applications
#define TIME_SYNC_SAMPLES 1 // number of time requests for averaging #define TIME_SYNC_SAMPLES 1 // number of time requests for averaging