display.cpp: fix field width BME
This commit is contained in:
parent
837988081e
commit
da02e67c8f
@ -7,7 +7,7 @@
|
||||
|
||||
; ---> SELECT THE TARGET PLATFORM HERE! <---
|
||||
[board]
|
||||
halfile = generic.h
|
||||
;halfile = generic.h
|
||||
;halfile = ebox.h
|
||||
;halfile = eboxtube.h
|
||||
;halfile = ecopower.h
|
||||
@ -18,7 +18,7 @@ halfile = generic.h
|
||||
;halfile = ttgov21old.h
|
||||
;halfile = ttgov21new.h
|
||||
;halfile = ttgofox.h
|
||||
;halfile = ttgobeam.h
|
||||
halfile = ttgobeam.h
|
||||
;halfile = fipy.h
|
||||
;halfile = lopy.h
|
||||
;halfile = lopy4.h
|
||||
@ -40,7 +40,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
|
||||
|
||||
[common]
|
||||
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
|
||||
release_version = 1.7.82
|
||||
release_version = 1.7.841
|
||||
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
|
||||
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
|
||||
debug_level = 3
|
||||
@ -81,7 +81,7 @@ lib_deps_all =
|
||||
build_flags_basic =
|
||||
-include "src/hal/${board.halfile}"
|
||||
-include "src/paxcounter.conf"
|
||||
-w
|
||||
;-w
|
||||
'-DCORE_DEBUG_LEVEL=${common.debug_level}'
|
||||
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
|
||||
'-DPROGVERSION="${common.release_version}"'
|
||||
|
@ -338,16 +338,16 @@ void draw_page(time_t t, uint8_t page) {
|
||||
|
||||
#if (HAS_BME)
|
||||
// line 2-3: Temp
|
||||
snprintf(buff, sizeof(buff), "TMP:%-4.1f", bme_status.temperature);
|
||||
snprintf(buff, sizeof(buff), "TMP:%-2.1f", bme_status.temperature);
|
||||
u8x8.draw2x2String(0, 2, buff);
|
||||
|
||||
// line 4-5: Hum
|
||||
snprintf(buff, sizeof(buff), "HUM:%-4.1f", bme_status.humidity);
|
||||
snprintf(buff, sizeof(buff), "HUM:%-2.1f", bme_status.humidity);
|
||||
u8x8.draw2x2String(0, 4, buff);
|
||||
|
||||
#ifdef HAS_BME680
|
||||
// line 6-7: IAQ
|
||||
snprintf(buff, sizeof(buff), "IAQ:%-4.1f", bme_status.iaq);
|
||||
snprintf(buff, sizeof(buff), "IAQ:%-3.0f", bme_status.iaq);
|
||||
u8x8.draw2x2String(0, 6, buff);
|
||||
#endif
|
||||
|
||||
|
@ -29,9 +29,9 @@
|
||||
|
||||
// enable only if device has these sensors, otherwise comment these lines
|
||||
// BME680 sensor on I2C bus
|
||||
//#define HAS_BME 1 // Enable BME sensors in general
|
||||
//#define HAS_BME680 SDA, SCL
|
||||
//#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
|
||||
#define HAS_BME 1 // Enable BME sensors in general
|
||||
#define HAS_BME680 SDA, SCL
|
||||
#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
|
||||
|
||||
// display (if connected)
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
|
@ -71,7 +71,7 @@
|
||||
#define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off
|
||||
#define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0]
|
||||
#define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0]
|
||||
#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
|
||||
#define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
|
||||
|
||||
// settings for syncing time with timeserver applications
|
||||
#define TIME_SYNC_SAMPLES 1 // number of time requests for averaging
|
||||
|
Loading…
Reference in New Issue
Block a user