ttgobeam.h added

This commit is contained in:
Klaus K Wilting 2018-06-06 20:01:08 +02:00
parent 8df149d303
commit d73f31607f
2 changed files with 38 additions and 1 deletions

View File

@ -11,10 +11,11 @@
; ---> SELECT TARGET PLATFORM HERE! <---
[platformio]
env_default = heltec
;env_default = heltec
;env_default = ttgov1
;env_default = ttgov2
;env_default = ttgov21
env_default = ttgobeam
;env_default = lopy
;env_default = lopy4
;env_default = fipy
@ -101,6 +102,20 @@ build_flags =
${common_env_data.build_flags}
-include "src/hal/ttgov21.h"
[env:ttgobeam]
platform = ${common_env_data.platform_espressif32}
framework = arduino
board = esp32dev
board_build.partitions = ${common_env_data.board_build.partitions}
board_upload.maximum_size = ${common_env_data.board_upload.maximum_size}
monitor_speed = 115200
upload_speed = 921600
lib_deps =
${common_env_data.lib_deps_display}
build_flags =
${common_env_data.build_flags}
-include "src/hal/ttgobeam.h"
[env:fipy]
platform = espressif32@1.0.1
framework = arduino

22
src/hal/ttgobeam.h Normal file
View File

@ -0,0 +1,22 @@
// Hardware related definitions for TTGO T-Beam board
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define HAS_LED 21 // on board green LED_G1
#//define HAS_LED 22 // on board red LED_G3 ? to be checked
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 ? to be checked
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
// #define HAS_GPS // to be done
// GSP serial (9600, SERIAL_8N1, 12, 15); //17-TX 18-RX
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS 18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
#define PIN_SPI_MOSI 27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK 5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
// non arduino pin definitions
#define RST 14 // connected to ESP32 RST/EN
#define DIO0 26 // ESP32 GPIO26 <-> HPD13A IO0
#define DIO1 33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1 // !!needs external wiring!!
#define DIO2 32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2 // needs external wiring, but not needed for LoRa