diff --git a/include/blescan.h b/include/blescan.h deleted file mode 100644 index e9252e88..00000000 --- a/include/blescan.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _BLESCAN_H -#define _BLESCAN_H - -#include "globals.h" -#include "macsniff.h" - -// Bluetooth specific includes -#include -#include -#include -#include // needed for BLE_ADDR types, do not remove -#include - -void start_BLEscan(void); -void stop_BLEscan(void); - -#endif \ No newline at end of file diff --git a/include/cyclic.h b/include/cyclic.h index 03d64b18..26ce3fd5 100644 --- a/include/cyclic.h +++ b/include/cyclic.h @@ -1,6 +1,7 @@ #ifndef _CYCLIC_H #define _CYCLIC_H +#include #include "globals.h" #include "senddata.h" #include "rcommand.h" @@ -10,11 +11,8 @@ #include "display.h" #include "sds011read.h" #include "sdcard.h" -#include "macsniff.h" #include "reset.h" -#if LIBPAX -#include -#endif +#include "led.h" extern Ticker cyclicTimer; diff --git a/include/globals.h b/include/globals.h index 950d21b1..d63e5b7f 100644 --- a/include/globals.h +++ b/include/globals.h @@ -15,7 +15,6 @@ #include #include #include -#include "mallocator.h" #include #define _bit(b) (1U << (b)) @@ -100,13 +99,6 @@ typedef struct { uint8_t Message[PAYLOAD_BUFFER_SIZE]; } MessageBuffer_t; -// Struct for MAC processing queue -typedef struct { - uint8_t mac[6]; - int8_t rssi; - snifftype_t sniff_type; -} MacBuffer_t; - typedef struct { int32_t latitude; int32_t longitude; @@ -131,7 +123,6 @@ typedef struct { float pm25; } sdsStatus_t; -extern std::set, Mallocator> macs; extern std::array::iterator it; extern std::array beacons; @@ -140,15 +131,12 @@ extern char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer extern uint8_t volatile channel; // wifi channel rotation counter extern uint8_t volatile rf_load; // RF traffic indicator extern uint8_t batt_level; // display value -extern uint16_t volatile macs_wifi, macs_ble; // display values -#if LIBPAX extern uint16_t volatile libpax_macs_ble, libpax_macs_wifi; // libpax values -#endif extern bool volatile TimePulseTick; // 1sec pps flag set by GPS or RTC extern timesource_t timeSource; extern hw_timer_t *displayIRQ, *matrixDisplayIRQ, *ppsIRQ; extern SemaphoreHandle_t I2Caccess; -extern TaskHandle_t irqHandlerTask, ClockTask, macProcessTask; +extern TaskHandle_t irqHandlerTask, ClockTask; extern TimerHandle_t WifiChanTimer; extern Timezone myTZ; diff --git a/include/macsniff.h b/include/macsniff.h deleted file mode 100644 index 6bc346ef..00000000 --- a/include/macsniff.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _MACSNIFF_H -#define _MACSNIFF_H - -// ESP32 Functions -#include - -// Hash function for scrambling MAC addresses -#include "hash.h" -#include "senddata.h" -#include "cyclic.h" -#include "led.h" - -#if (COUNT_ENS) -#include "corona.h" -#endif - -uint32_t renew_salt(void); -uint64_t macConvert(uint8_t *paddr); -esp_err_t macQueueInit(void); -void mac_process(void *pvParameters); -void IRAM_ATTR mac_add(uint8_t *paddr, int8_t rssi, snifftype_t sniff_type); -uint16_t mac_analyze(MacBuffer_t MacBuffer); -void printKey(const char *name, const uint8_t *key, uint8_t len, bool lsb); - -#endif diff --git a/include/main.h b/include/main.h index 2a5bd104..8fcc6b7e 100644 --- a/include/main.h +++ b/include/main.h @@ -8,8 +8,6 @@ #include "globals.h" #include "reset.h" #include "i2c.h" -#include "blescan.h" -#include "wifiscan.h" #include "configmanager.h" #include "cyclic.h" #include "beacon_array.h" diff --git a/include/mallocator.h b/include/mallocator.h deleted file mode 100644 index 7d32d409..00000000 --- a/include/mallocator.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - -This Mallocator code was taken from: - -CppCon2014 Presentations -STL Features And Implementation Techniques -Stephan T. Lavavej - -https://github.com/CppCon/CppCon2014 - -*/ - - -#ifndef _MALLOCATOR_H -#define _MALLOCATOR_H - -#include // size_t, malloc, free -#include // bad_alloc, bad_array_new_length -#include "esp32-hal-psram.h" // ps_malloc - -template struct Mallocator { - typedef T value_type; - Mallocator() noexcept {} // default ctor not required - template Mallocator(const Mallocator &) noexcept {} - template bool operator==(const Mallocator &) const noexcept { - return true; - } - template bool operator!=(const Mallocator &) const noexcept { - return false; - } - - T *allocate(const size_t n) const { - if (n == 0) { - return nullptr; - } - if (n > static_cast(-1) / sizeof(T)) { - throw std::bad_array_new_length(); - } - -#ifndef BOARD_HAS_PSRAM - void *const pv = malloc(n * sizeof(T)); -#else - void *const pv = ps_malloc(n * sizeof(T)); -#endif - - if (!pv) { - throw std::bad_alloc(); - } - return static_cast(pv); - } - void deallocate(T *const p, size_t) const noexcept { free(p); } -}; - -#endif \ No newline at end of file diff --git a/include/rcommand.h b/include/rcommand.h index 8149d668..4d59d75f 100644 --- a/include/rcommand.h +++ b/include/rcommand.h @@ -8,12 +8,9 @@ #include "configmanager.h" #include "lorawan.h" #include "sensor.h" -#include "macsniff.h" -#include "wifiscan.h" #include "cyclic.h" #include "timekeeper.h" #include "timesync.h" -#include "blescan.h" // maximum number of elements in rcommand interpreter queue #define RCMD_QUEUE_SIZE 5 diff --git a/include/senddata.h b/include/senddata.h index ea56ac99..f8666770 100644 --- a/include/senddata.h +++ b/include/senddata.h @@ -1,6 +1,7 @@ #ifndef _SENDDATA_H #define _SENDDATA_H +#include #include "spislave.h" #include "mqttclient.h" #include "cyclic.h" @@ -9,18 +10,11 @@ #include "display.h" #include "sdcard.h" - #if (COUNT_ENS) #include "corona.h" #endif -#if LIBPAX -#include - extern struct count_payload_t count_from_libpax; -#endif - - extern Ticker sendTimer; void SendPayload(uint8_t port); diff --git a/include/wifiscan.h b/include/wifiscan.h deleted file mode 100644 index 53a414c3..00000000 --- a/include/wifiscan.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _WIFISCAN_H -#define _WIFISCAN_H - -// ESP32 Functions -#include - -#include "hash.h" // Hash function for scrambling MAC addresses -#include "antenna.h" // code for switching wifi antennas -#include "macsniff.h" - -extern TimerHandle_t WifiChanTimer; - -void wifi_sniffer_init(void); -void switch_wifi_sniffer(uint8_t state); -void IRAM_ATTR wifi_sniffer_packet_handler(void *buff, - wifi_promiscuous_pkt_type_t type); -void switchWifiChannel(TimerHandle_t xTimer); - -#endif \ No newline at end of file diff --git a/src/blecsan.cpp b/src/blecsan.cpp deleted file mode 100644 index 139f7e74..00000000 --- a/src/blecsan.cpp +++ /dev/null @@ -1,304 +0,0 @@ -#if !(LIBPAX) -// some code snippets taken from -// https://github.com/nkolban/esp32-snippets/tree/master/BLE/scanner - -#include "blescan.h" - -#define BT_BD_ADDR_HEX(addr) \ - addr[0], addr[1], addr[2], addr[3], addr[4], addr[5] - -// local Tag for logging -static const char TAG[] = "bluetooth"; - -#ifdef VERBOSE -const char *bt_addr_t_to_string(esp_ble_addr_type_t type) { - switch (type) { - case BLE_ADDR_TYPE_PUBLIC: - return "BLE_ADDR_TYPE_PUBLIC"; - case BLE_ADDR_TYPE_RANDOM: - return "BLE_ADDR_TYPE_RANDOM"; - case BLE_ADDR_TYPE_RPA_PUBLIC: - return "BLE_ADDR_TYPE_RPA_PUBLIC"; - case BLE_ADDR_TYPE_RPA_RANDOM: - return "BLE_ADDR_TYPE_RPA_RANDOM"; - default: - return "Unknown addr_t"; - } -} // bt_addr_t_to_string - -const char *btsig_gap_type(uint32_t gap_type) { - switch (gap_type) { - case 0x01: - return "Flags"; - case 0x02: - return "Incomplete List of 16-bit Service Class UUIDs"; - case 0x03: - return "Complete List of 16-bit Service Class UUIDs"; - case 0x04: - return "Incomplete List of 32-bit Service Class UUIDs"; - case 0x05: - return "Complete List of 32-bit Service Class UUIDs"; - case 0x06: - return "Incomplete List of 128-bit Service Class UUIDs"; - case 0x07: - return "Complete List of 128-bit Service Class UUIDs"; - case 0x08: - return "Shortened Local Name"; - case 0x09: - return "Complete Local Name"; - case 0x0A: - return "Tx Power Level"; - case 0x0D: - return "Class of Device"; - case 0x0E: - return "Simple Pairing Hash C/C-192"; - case 0x0F: - return "Simple Pairing Randomizer R/R-192"; - case 0x10: - return "Device ID/Security Manager TK Value"; - case 0x11: - return "Security Manager Out of Band Flags"; - case 0x12: - return "Slave Connection Interval Range"; - case 0x14: - return "List of 16-bit Service Solicitation UUIDs"; - case 0x1F: - return "List of 32-bit Service Solicitation UUIDs"; - case 0x15: - return "List of 128-bit Service Solicitation UUIDs"; - case 0x16: - return "Service Data - 16-bit UUID"; - case 0x20: - return "Service Data - 32-bit UUID"; - case 0x21: - return "Service Data - 128-bit UUID"; - case 0x22: - return "LE Secure Connections Confirmation Value"; - case 0x23: - return "LE Secure Connections Random Value"; - case 0x24: - return "URI"; - case 0x25: - return "Indoor Positioning"; - case 0x26: - return "Transport Discovery Data"; - case 0x17: - return "Public Target Address"; - case 0x18: - return "Random Target Address"; - case 0x19: - return "Appearance"; - case 0x1A: - return "Advertising Interval"; - case 0x1B: - return "LE Bluetooth Device Address"; - case 0x1C: - return "LE Role"; - case 0x1D: - return "Simple Pairing Hash C-256"; - case 0x1E: - return "Simple Pairing Randomizer R-256"; - case 0x3D: - return "3D Information Data"; - case 0xFF: - return "Manufacturer Specific Data"; - - default: - return "Unknown type"; - } -} // btsig_gap_type -#endif - -// using IRAM_ATTR here to speed up callback function -IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event, - esp_ble_gap_cb_param_t *param) { - - esp_ble_gap_cb_param_t *p = (esp_ble_gap_cb_param_t *)param; - -#if (COUNT_ENS) - // UUID of Exposure Notification Service (ENS) - // https://blog.google/documents/70/Exposure_Notification_-_Bluetooth_Specification_v1.2.2.pdf - static const char ensMagicBytes[] = "\x16\x6f\xfd"; -#endif - -#ifdef VERBOSE - ESP_LOGV(TAG, "BT payload rcvd -> type: 0x%.2x -> %s", *p->scan_rst.ble_adv, - btsig_gap_type(*p->scan_rst.ble_adv)); -#endif - - switch (event) { - case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT: - // restart scan - esp_ble_gap_start_scanning(BLESCANTIME); - break; - - case ESP_GAP_BLE_SCAN_RESULT_EVT: - // evaluate scan results - if (p->scan_rst.search_evt == - ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done - { // restart scan - esp_ble_gap_start_scanning(BLESCANTIME); - return; - } - - if (p->scan_rst.search_evt == - ESP_GAP_SEARCH_INQ_RES_EVT) // Inquiry result for a peer device - { // evaluate sniffed packet -#ifdef VERBOSE - ESP_LOGV(TAG, "Device address (bda): %02x:%02x:%02x:%02x:%02x:%02x", - BT_BD_ADDR_HEX(p->scan_rst.bda)); - ESP_LOGV(TAG, "Addr_type : %s", - bt_addr_t_to_string(p->scan_rst.ble_addr_type)); - ESP_LOGV(TAG, "RSSI : %d", p->scan_rst.rssi); -#endif - -#if (MACFILTER) - if ((p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RANDOM) || - (p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RPA_RANDOM)) { -#ifdef VERBOSE - ESP_LOGV(TAG, "BT device filtered"); -#endif - break; - } -#endif - - // add this device mac to processing queue - -#if (COUNT_ENS) - // check for ens signature - if (cfg.enscount) { - if (strstr((const char *)p->scan_rst.ble_adv, ensMagicBytes) != NULL) - mac_add((uint8_t *)p->scan_rst.bda, p->scan_rst.rssi, - MAC_SNIFF_BLE_ENS); - else - mac_add((uint8_t *)p->scan_rst.bda, p->scan_rst.rssi, MAC_SNIFF_BLE); - } -#else - mac_add((uint8_t *)p->scan_rst.bda, p->scan_rst.rssi, MAC_SNIFF_BLE); -#endif - - /* to be improved in macfilter: - // you can search for elements in the payload using the - // function esp_ble_resolve_adv_data() - // - // Like this, that scans for the "Complete name" (looking inside the - payload buffer) - // uint8_t len; - // uint8_t *data = esp_ble_resolve_adv_data(p->scan_rst.ble_adv, - ESP_BLE_AD_TYPE_NAME_CMPL, &len); - - filter BLE devices using their advertisements to get filter alternative - to vendor OUI if macfiltering is on, we ... - - want to count: mobile phones and tablets - - don't want to count: beacons, peripherals (earphones, headsets, - printers), cars and machines see - https://github.com/nkolban/ESP32_BLE_Arduino/blob/master/src/BLEAdvertisedDevice.cpp - - http://www.libelium.com/products/meshlium/smartphone-detection/ - - https://www.question-defense.com/2013/01/12/bluetooth-cod-bluetooth-class-of-deviceclass-of-service-explained - - https://www.bluetooth.com/specifications/assigned-numbers/baseband - - "The Class of Device (CoD) in case of Bluetooth which allows us to - differentiate the type of device (smartphone, handsfree, computer, - LAN/network AP). With this parameter we can differentiate among - pedestrians and vehicles." - - */ - - } // evaluate sniffed packet - break; - - default: - break; - } // switch -} // gap_callback_handler - -esp_err_t register_ble_callback(bool unregister = false) { - - if (unregister) { - - ESP_LOGI(TAG, "Unregister GAP callback..."); - esp_ble_gap_stop_scanning(); - esp_ble_gap_register_callback(NULL); - - } - - else { - - ESP_LOGI(TAG, "Register GAP callback..."); - - // This function is called when gap event occurs, such as scan result. - // register the scan callback function to the gap module - esp_ble_gap_register_callback(&gap_callback_handler); - - static esp_ble_scan_params_t ble_scan_params = { - .scan_type = BLE_SCAN_TYPE_PASSIVE, - .own_addr_type = BLE_ADDR_TYPE_RANDOM, - .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL, - - /* - #if (MACFILTER) - .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR, - // ADV_IND, ADV_NONCONN_IND, ADV_SCAN_IND packets are used - for broadcasting - // data in broadcast applications (e.g., Beacons), so we - don't want them in - // macfilter mode - #else - .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL, - #endif - */ - - .scan_interval = - (uint16_t)(cfg.blescantime * 10 / 0.625), // Time = N * 0.625 msec - .scan_window = - (uint16_t)(BLESCANWINDOW / 0.625), // Time = N * 0.625 msec - .scan_duplicate = BLE_SCAN_DUPLICATE_ENABLE}; - - ESP_LOGI(TAG, "Set GAP scan parameters"); - - // This function is called to set scan parameters. - esp_ble_gap_set_scan_params(&ble_scan_params); - } - - return ESP_OK; - -} // register_ble_callback - -void start_BLEscan(void) { -#if (BLECOUNTER) - ESP_LOGI(TAG, "Initializing bluetooth scanner ..."); - // Initialize BT controller to allocate task and other resource. - if (btStart()) { // enable bt_controller - esp_coex_preference_set(ESP_COEX_PREFER_BT); - esp_bluedroid_init(); - esp_bluedroid_enable(); - // Register callback function for capturing bluetooth packets - register_ble_callback(false); - ESP_LOGI(TAG, "Bluetooth scanner started"); - } else { - ESP_LOGE(TAG, "Bluetooth controller start failed. Resetting device"); - do_reset(true); - } -#endif // BLECOUNTER -} // start_BLEscan - -void stop_BLEscan(void) { -#if (BLECOUNTER) - ESP_LOGI(TAG, "Shutting down bluetooth scanner ..."); - register_ble_callback(true); // unregister capture function - ESP_LOGD(TAG, "bluedroid disable..."); - esp_bluedroid_disable(); - ESP_LOGD(TAG, "bluedroid deinit..."); - esp_bluedroid_deinit(); - if (!btStop()) { // disable bt_controller - ESP_LOGE(TAG, "Bluetooth controller stop failed. Resetting device"); - do_reset(true); - } - esp_coex_preference_set(ESP_COEX_PREFER_WIFI); - ESP_LOGI(TAG, "Bluetooth scanner stopped"); -#endif // BLECOUNTER -} // stop_BLEscan -#endif \ No newline at end of file diff --git a/src/cyclic.cpp b/src/cyclic.cpp index 49d87f8b..dd115007 100644 --- a/src/cyclic.cpp +++ b/src/cyclic.cpp @@ -29,11 +29,6 @@ void doHousekeeping() { ESP_LOGD(TAG, "IRQhandler %d bytes left | Taskstate = %d", uxTaskGetStackHighWaterMark(irqHandlerTask), eTaskGetState(irqHandlerTask)); -#if !(LIBPAX) - ESP_LOGD(TAG, "MACprocessor %d bytes left | Taskstate = %d", - uxTaskGetStackHighWaterMark(macProcessTask), - eTaskGetState(macProcessTask)); -#endif ESP_LOGD(TAG, "Rcommand interpreter %d bytes left | Taskstate = %d", uxTaskGetStackHighWaterMark(rcmdTask), eTaskGetState(rcmdTask)); #if (HAS_LORA) @@ -138,12 +133,6 @@ uint32_t getFreeRAM() { void reset_counters() { #if ((WIFICOUNTER) || (BLECOUNTER)) -#if !(LIBPAX) - macs.clear(); // clear all macs container - macs_wifi = 0; - macs_ble = 0; - renew_salt(); // get new salt -#endif #ifdef HAS_DISPLAY dp_plotCurve(0, true); #endif diff --git a/src/display.cpp b/src/display.cpp index e2e1c02c..91ee570b 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -262,11 +262,7 @@ void dp_drawPage(time_t t, bool nextpage) { #if ((WIFICOUNTER) && (BLECOUNTER)) if (cfg.wifiscan) -#if !(LIBPAX) - dp_printf("WIFI:%-5d", macs_wifi); -#else dp_printf("WIFI:%-5d", libpax_macs_wifi); -#endif else dp_printf("WIFI:off"); if (cfg.blescan) @@ -275,29 +271,17 @@ void dp_drawPage(time_t t, bool nextpage) { dp_printf(" CWA:%-5d", cwa_report()); else #endif -#if !(LIBPAX) - dp_printf("BLTH:%-5d", macs_ble); -#else dp_printf("BLTH:%-5d", libpax_macs_ble); -#endif else dp_printf(" BLTH:off"); #elif ((WIFICOUNTER) && (!BLECOUNTER)) if (cfg.wifiscan) -#if !(LIBPAX) - dp_printf("WIFI:%-5d", macs_wifi); -#else dp_printf("WIFI:%-5d", libpax_macs_wifi); -#endif else dp_printf("WIFI:off"); #elif ((!WIFICOUNTER) && (BLECOUNTER)) if (cfg.blescan) -#if !(LIBPAX) - dp_printf("BLTH:%-5d", macs_ble); -#else dp_printf("BLTH:%-5d", libpax_macs_ble); -#endif #if (COUNT_ENS) if (cfg.enscount) dp_printf("(CWA:%d)", cwa_report()); diff --git a/src/libpax_helpers.cpp b/src/libpax_helpers.cpp index b02f93d0..b637d226 100644 --- a/src/libpax_helpers.cpp +++ b/src/libpax_helpers.cpp @@ -1,18 +1,17 @@ #include "libpax_helpers.h" // libpax payload -#if LIBPAX struct count_payload_t count_from_libpax; uint16_t volatile libpax_macs_ble, libpax_macs_wifi; void process_count(void) { - printf("pax: %d; %d; %d;\n", count_from_libpax.pax, count_from_libpax.wifi_count, count_from_libpax.ble_count); + printf("pax: %d; %d; %d;\n", count_from_libpax.pax, + count_from_libpax.wifi_count, count_from_libpax.ble_count); libpax_macs_ble = count_from_libpax.ble_count; libpax_macs_wifi = count_from_libpax.wifi_count; } void init_libpax() { - libpax_counter_init(process_count, &count_from_libpax, 60*1000, 1); - libpax_counter_start(); -} -#endif \ No newline at end of file + libpax_counter_init(process_count, &count_from_libpax, 60 * 1000, 1); + libpax_counter_start(); +} \ No newline at end of file diff --git a/src/lorawan.cpp b/src/lorawan.cpp index fd601e97..b7a7fbdd 100644 --- a/src/lorawan.cpp +++ b/src/lorawan.cpp @@ -163,6 +163,18 @@ void os_getDevEui(u1_t *buf) { #if (VERBOSE) +// Display a key +void printKey(const char *name, const uint8_t *key, uint8_t len, bool lsb) { + const uint8_t *p; + char keystring[len + 1] = "", keybyte[3]; + for (uint8_t i = 0; i < len; i++) { + p = lsb ? key + len - i - 1 : key + i; + snprintf(keybyte, 3, "%02X", *p); + strncat(keystring, keybyte, 2); + } + ESP_LOGI(TAG, "%s: %s", name, keystring); +} + // Display OTAA keys void showLoraKeys(void) { // LMIC may not have used callback to fill diff --git a/src/macsniff.cpp b/src/macsniff.cpp deleted file mode 100644 index e031d36e..00000000 --- a/src/macsniff.cpp +++ /dev/null @@ -1,198 +0,0 @@ - -// Basic Config -#include "globals.h" -#include "macsniff.h" - -// Local logging tag -static const char TAG[] = __FILE__; - -static QueueHandle_t MacQueue; -TaskHandle_t macProcessTask; - -static uint32_t salt = renew_salt(); - -uint32_t renew_salt(void) { - salt = esp_random(); - ESP_LOGV(TAG, "new salt = %04X", salt); - return salt; -} - -int8_t isBeacon(uint64_t mac) { - it = std::find(beacons.begin(), beacons.end(), mac); - if (it != beacons.end()) - return std::distance(beacons.begin(), it); - else - return -1; -} - -// Display a key -void printKey(const char *name, const uint8_t *key, uint8_t len, bool lsb) { - const uint8_t *p; - char keystring[len + 1] = "", keybyte[3]; - for (uint8_t i = 0; i < len; i++) { - p = lsb ? key + len - i - 1 : key + i; - snprintf(keybyte, 3, "%02X", *p); - strncat(keystring, keybyte, 2); - } - ESP_LOGI(TAG, "%s: %s", name, keystring); -} - -uint64_t macConvert(uint8_t *paddr) { - uint64_t *mac; - mac = (uint64_t *)paddr; - return (__builtin_bswap64(*mac) >> 16); -} - -esp_err_t macQueueInit() { - _ASSERT(MAC_QUEUE_SIZE > 0); - MacQueue = xQueueCreate(MAC_QUEUE_SIZE, sizeof(MacBuffer_t)); - if (MacQueue == 0) { - ESP_LOGE(TAG, "Could not create MAC processing queue. Aborting."); - return ESP_FAIL; - } - ESP_LOGI(TAG, "MAC processing queue created, size %d Bytes", - MAC_QUEUE_SIZE * sizeof(MacBuffer_t)); - - xTaskCreatePinnedToCore(mac_process, // task function - "mac_process", // name of task - 3072, // stack size of task - (void *)1, // parameter of the task - 1, // priority of the task - &macProcessTask, // task handle - 1); // CPU core - - return ESP_OK; -} - -// sniffed MAC processing task -void mac_process(void *pvParameters) { - _ASSERT((uint32_t)pvParameters == 1); // FreeRTOS check - - MacBuffer_t MacBuffer; - - while (1) { - - // fetch next or wait for incoming MAC from sniffing queue - if (xQueueReceive(MacQueue, &MacBuffer, portMAX_DELAY) != pdTRUE) { - ESP_LOGE(TAG, "Premature return from xQueueReceive() with no data!"); - continue; - } - - // update traffic indicator - rf_load = uxQueueMessagesWaiting(MacQueue); - // process fetched mac - mac_analyze(MacBuffer); - } - delay(2); // yield to CPU -} - -// enqueue message in MAC processing queue -void IRAM_ATTR mac_add(uint8_t *paddr, int8_t rssi, snifftype_t sniff_type) { - - MacBuffer_t MacBuffer; - - MacBuffer.rssi = rssi; - MacBuffer.sniff_type = sniff_type; - memcpy(MacBuffer.mac, paddr, 6); - - if (xQueueSendToBackFromISR(MacQueue, (void *)&MacBuffer, (TickType_t)0) != - pdPASS) - ESP_LOGW(TAG, "Dense radio traffic, packet lost!"); -} - -uint16_t mac_analyze(MacBuffer_t MacBuffer) { - - uint32_t *mac; // pointer to shortened 4 byte MAC - uint32_t saltedmac; - uint16_t hashedmac; - - if ((cfg.rssilimit) && - (MacBuffer.rssi < cfg.rssilimit)) { // rssi is negative value - ESP_LOGI(TAG, "%s RSSI %d -> ignoring (limit: %d)", - (MacBuffer.sniff_type == MAC_SNIFF_WIFI) ? "WIFI" : "BLTH", - MacBuffer.rssi, cfg.rssilimit); - return 0; - } - - // in beacon monitor mode check if seen MAC is a known beacon - if (cfg.monitormode) { - int8_t beaconID = isBeacon(macConvert(MacBuffer.mac)); - if (beaconID >= 0) { - ESP_LOGI(TAG, "Beacon ID#%d detected", beaconID); - blink_LED(COLOR_WHITE, 2000); - payload.reset(); - payload.addAlarm(MacBuffer.rssi, beaconID); - SendPayload(BEACONPORT); - } - }; - - // only last 3 MAC Address bytes are used for MAC address anonymization - // but since it's uint32 we take 4 bytes to avoid 1st value to be 0. - // this gets MAC in msb (= reverse) order, but doesn't matter for hashing it. - mac = (uint32_t *)(MacBuffer.mac + 2); - - // salt and hash MAC, and if new unique one, store identifier in container - // and increment counter on display - // https://en.wikipedia.org/wiki/MAC_Address_Anonymization - - // reversed 4 byte MAC added to current salt - saltedmac = *mac + salt; - - // hashed 4 byte MAC - // to save RAM, we use only lower 2 bytes of hash, since collisions don't - // matter in our use case - hashedmac = myhash((const char *)&saltedmac, 4); - - auto newmac = macs.insert(hashedmac); // add hashed MAC, if new unique - bool added = - newmac.second ? true : false; // true if hashed MAC is unique in container - - // Count only if MAC was not yet seen - if (added) { - - switch (MacBuffer.sniff_type) { - - case MAC_SNIFF_WIFI: - macs_wifi++; // increment Wifi MACs counter - blink_LED(COLOR_GREEN, 50); - break; - - case MAC_SNIFF_BLE: - macs_ble++; // increment BLE Macs counter - blink_LED(COLOR_MAGENTA, 50); - break; -#if (COUNT_ENS) - case MAC_SNIFF_BLE_ENS: - macs_ble++; // increment BLE Macs counter - cwa_mac_add(hashedmac); // process ENS beacon - blink_LED(COLOR_WHITE, 50); - break; -#endif - default: - break; - - } // switch - } // added - - // Log scan result - ESP_LOGV(TAG, - "%s %s RSSI %ddBi -> MAC %0x:%0x:%0x:%0x:%0x:%0x -> salted %04X" - " -> hashed %04X -> WiFi:%d " - "BLTH:%d " -#if (COUNT_ENS) - "(CWA:%d)" -#endif - "-> %d Bytes left", - added ? "new " : "known", - MacBuffer.sniff_type == MAC_SNIFF_WIFI ? "WiFi" : "BLTH", - MacBuffer.rssi, MacBuffer.mac[0], MacBuffer.mac[1], MacBuffer.mac[2], - MacBuffer.mac[3], MacBuffer.mac[4], MacBuffer.mac[5], saltedmac, - hashedmac, macs_wifi, macs_ble, -#if (COUNT_ENS) - cwa_report(), -#endif - getFreeRAM()); - - // if an unknown Wifi or BLE mac was counted, return hash of this mac, else 0 - return (added ? hashedmac : 0); -} diff --git a/src/main.cpp b/src/main.cpp index 4a86064e..fbf7780e 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -38,7 +38,6 @@ timesync_proc 1 3 processes realtime time sync requests irqhandler 1 2 cyclic tasks (i.e. displayrefresh) triggered by timers gpsloop 1 1 reads data from GPS via serial or i2c lorasendtask 1 1 feeds data from lora sendqueue to lmcic -macprocess 1 1 MAC analyzer loop rmcd_process 1 1 Remote command interpreter loop IDLE 1 0 ESP32 arduino scheduler -> runs wifi channel rotator @@ -91,13 +90,7 @@ triggers pps 1 sec impulse configData_t cfg; // struct holds current device configuration char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer for LMIC event message uint8_t batt_level = 0; // display value -#if !(LIBPAX) -uint8_t volatile channel = WIFI_CHANNEL_MIN; // channel rotation counter -#endif -uint8_t volatile rf_load = 0; // RF traffic indicator -#if !(LIBPAX) -uint16_t volatile macs_wifi = 0, macs_ble = 0; // globals for display -#endif +uint8_t volatile rf_load = 0; // RF traffic indicator hw_timer_t *ppsIRQ = NULL, *displayIRQ = NULL, *matrixDisplayIRQ = NULL; @@ -106,10 +99,6 @@ SemaphoreHandle_t I2Caccess; bool volatile TimePulseTick = false; timesource_t timeSource = _unsynced; -// container holding unique MAC address hashes with Memory Alloctor using PSRAM, -// if present -DRAM_ATTR std::set, Mallocator> macs; - // initialize payload encoder PayloadConvert payload(PAYLOAD_BUFFER_SIZE); @@ -118,7 +107,6 @@ TimeChangeRule myDST = DAYLIGHT_TIME; TimeChangeRule mySTD = STANDARD_TIME; Timezone myTZ(myDST, mySTD); - // local Tag for logging static const char TAG[] = __FILE__; @@ -304,13 +292,8 @@ void setup() { if (RTC_runmode == RUNMODE_MAINTENANCE) start_boot_menu(); -#if !(LIBPAX) - // start mac processing task - ESP_LOGI(TAG, "Starting MAC processor..."); - macQueueInit(); -#else ESP_LOGI(TAG, "Starting libpax..."); -#if (defined WIFICOUNTER || defined BLECOUNTER) +#if (defined WIFICOUNTER || defined BLECOUNTER) struct libpax_config_t configuration; libpax_default_config(&configuration); ESP_LOGI(TAG, "BLESCAN: %d", cfg.blescan); @@ -325,40 +308,21 @@ void setup() { configuration.blescantime = cfg.blescantime; int config_update = libpax_update_config(&configuration); - if(config_update != 0) { + if (config_update != 0) { ESP_LOGE(TAG, "Error in libpax configuration."); } else { init_libpax(); } #endif + +#if (BLECOUNTER) + strcat_P(features, " BLE"); #endif // start rcommand processing task ESP_LOGI(TAG, "Starting rcommand interpreter..."); rcmd_init(); -// start BLE scan callback if BLE function is enabled in NVRAM configuration -// or remove bluetooth stack from RAM, if option bluetooth is not compiled -#if (BLECOUNTER) - strcat_P(features, " BLE"); -#if !(LIBPAX) - if (cfg.blescan) { - ESP_LOGI(TAG, "Starting Bluetooth..."); - start_BLEscan(); - } else - btStop(); -#endif -#else - // remove bluetooth stack to gain more free memory -#if !(LIBPAX) - btStop(); - esp_bt_mem_release(ESP_BT_MODE_BTDM); - esp_coex_preference_set( - ESP_COEX_PREFER_WIFI); // configure Wifi/BT coexist lib -#endif - -#endif - // initialize gps #if (HAS_GPS) strcat_P(features, " GPS"); @@ -463,29 +427,11 @@ void setup() { #if (WIFICOUNTER) strcat_P(features, " WIFI"); -#if !(LIBPAX) - // install wifi driver in RAM and start channel hopping - wifi_sniffer_init(); - // start wifi sniffing, if enabled - if (cfg.wifiscan) { - ESP_LOGI(TAG, "Starting Wifi..."); - switch_wifi_sniffer(1); - } else - switch_wifi_sniffer(0); -#endif - #else // remove wifi driver from RAM, if option wifi not compiled esp_wifi_deinit(); #endif - // initialize salt value using esp_random() called by random() in - // arduino-esp32 core. Note: do this *after* wifi has started, since - // function gets it's seed from RF noise -#if !(LIBPAX) - reset_counters(); -#endif - // start state machine ESP_LOGI(TAG, "Starting Interrupt Handler..."); xTaskCreatePinnedToCore(irqHandler, // task function diff --git a/src/paxcounter_orig.conf b/src/paxcounter_orig.conf index 638962a7..fdf874f4 100644 --- a/src/paxcounter_orig.conf +++ b/src/paxcounter_orig.conf @@ -29,9 +29,6 @@ #define BLESCANWINDOW 80 // [milliseconds] scan window, see below, 3 .. 10240, default 80ms #define BLESCANINTERVAL 80 // [illiseconds] scan interval, see below, 3 .. 10240, default 80ms = 100% duty cycle -// Use libpax instead of default counting algorithms -#define LIBPAX 0 - // Corona Exposure Notification Service(ENS) counter #define COUNT_ENS 1 // count found number of devices which advertise Exposure Notification Service // set to 1 if you want to enable this function [default=0] diff --git a/src/rcommand.cpp b/src/rcommand.cpp index 38d9d7d0..218f933e 100644 --- a/src/rcommand.cpp +++ b/src/rcommand.cpp @@ -21,7 +21,8 @@ void set_reset(uint8_t val[]) { reset_counters(); // clear macs break; case 2: // reset device to factory settings - ESP_LOGI(TAG, "Remote command: reset device to factory settings and restart"); + ESP_LOGI(TAG, + "Remote command: reset device to factory settings and restart"); eraseConfig(); do_reset(false); break; @@ -74,41 +75,12 @@ void set_sleepcycle(uint8_t val[]) { void set_wifichancycle(uint8_t val[]) { cfg.wifichancycle = val[0]; - #ifndef LIBAPX - // update Wifi channel rotation timer period - if (cfg.wifichancycle > 0) { - if (xTimerIsTimerActive(WifiChanTimer) == pdFALSE) - xTimerStart(WifiChanTimer, (TickType_t)0); - xTimerChangePeriod(WifiChanTimer, pdMS_TO_TICKS(cfg.wifichancycle * 10), - 100); - ESP_LOGI( - TAG, - "Remote command: set Wifi channel hopping interval to %.1f seconds", - cfg.wifichancycle / float(100)); - } else { - xTimerStop(WifiChanTimer, (TickType_t)0); - esp_wifi_set_channel(WIFI_CHANNEL_MIN, WIFI_SECOND_CHAN_NONE); - channel = WIFI_CHANNEL_MIN; - ESP_LOGI(TAG, "Remote command: set Wifi channel hopping to off"); - } - #else // TODO update libpax configuration - #endif } void set_blescantime(uint8_t val[]) { cfg.blescantime = val[0]; - #if !(LIBPAX) - ESP_LOGI(TAG, "Remote command: set BLE scan time to %.1f seconds", - cfg.blescantime / float(100)); - // stop & restart BLE scan task to apply new parameter - if (cfg.blescan) { - stop_BLEscan(); - start_BLEscan(); - } - #else - // TODO update libpax configuration - #endif + // TODO update libpax configuration } void set_countmode(uint8_t val[]) { @@ -202,12 +174,18 @@ void set_sensor(uint8_t val[]) { #endif } +uint64_t macConvert(uint8_t *paddr) { + uint64_t *mac; + mac = (uint64_t *)paddr; + return (__builtin_bswap64(*mac) >> 16); +} + void set_beacon(uint8_t val[]) { uint8_t id = val[0]; // use first parameter as beacon storage id memmove(val, val + 1, 6); // strip off storage id beacons[id] = macConvert(val); // store beacon MAC in array ESP_LOGI(TAG, "Remote command: set beacon ID#%d", id); - printKey("MAC", val, 6, false); // show beacon MAC + //printKey("MAC", val, 6, false); // show beacon MAC } void set_monitor(uint8_t val[]) { @@ -251,37 +229,24 @@ void set_loraadr(uint8_t val[]) { void set_blescan(uint8_t val[]) { ESP_LOGI(TAG, "Remote command: set BLE scanner to %s", val[0] ? "on" : "off"); cfg.blescan = val[0] ? 1 : 0; - #if !(LIBPAX) - macs_ble = 0; // clear BLE counter - if (cfg.blescan) - start_BLEscan(); - else - stop_BLEscan(); - #else libpax_counter_stop(); libpax_config_t current_config; libpax_get_current_config(¤t_config); current_config.blecounter = cfg.blescan; libpax_update_config(¤t_config); init_libpax(); - #endif } void set_wifiscan(uint8_t val[]) { ESP_LOGI(TAG, "Remote command: set WIFI scanner to %s", val[0] ? "on" : "off"); cfg.wifiscan = val[0] ? 1 : 0; - #if !(LIBPAX) - macs_wifi = 0; // clear WIFI counter - switch_wifi_sniffer(cfg.wifiscan); - #else libpax_counter_stop(); libpax_config_t current_config; libpax_get_current_config(¤t_config); current_config.wificounter = cfg.wifiscan; libpax_update_config(¤t_config); init_libpax(); - #endif } void set_wifiant(uint8_t val[]) { diff --git a/src/reset.cpp b/src/reset.cpp index 84e734e8..cbabc9d0 100644 --- a/src/reset.cpp +++ b/src/reset.cpp @@ -107,24 +107,10 @@ void enter_deepsleep(const uint64_t wakeup_sec, gpio_num_t wakeup_gpio) { sendTimer.detach(); // switch off radio and other power consuming hardware -#if !(LIBPAX) -#if (WIFICOUNTER) - switch_wifi_sniffer(0); -#endif -#if (BLECOUNTER) - stop_BLEscan(); - btStop(); -#endif -#endif #if (HAS_SDS011) sds011_sleep(void); #endif -#if !(LIBPAX) - // stop MAC processing - vTaskDelete(macProcessTask); -#endif - // halt interrupts accessing i2c bus mask_user_IRQ(); diff --git a/src/senddata.cpp b/src/senddata.cpp index 4c1ef4d9..12fe735c 100644 --- a/src/senddata.cpp +++ b/src/senddata.cpp @@ -3,9 +3,7 @@ Ticker sendTimer; -void setSendIRQ() { - xTaskNotify(irqHandlerTask, SENDCYCLE_IRQ, eSetBits); -} +void setSendIRQ() { xTaskNotify(irqHandlerTask, SENDCYCLE_IRQ, eSetBits); } // put data to send in RTos Queues used for transmit over channels Lora and SPI void SendPayload(uint8_t port) { @@ -57,11 +55,7 @@ void SendPayload(uint8_t port) { // write data to sdcard, if present #if (HAS_SDCARD) if (port == COUNTERPORT) { -#if !(LIBPAX) - sdcardWriteData(macs_wifi, macs_ble -#else sdcardWriteData(libpax_macs_wifi, libpax_macs_ble -#endif #if (COUNT_ENS) , cwa_report() @@ -91,19 +85,11 @@ void sendData() { case COUNT_DATA: payload.reset(); #if !(PAYLOAD_OPENSENSEBOX) -#if !(LIBPAX) - payload.addCount(macs_wifi, MAC_SNIFF_WIFI); -#else ESP_LOGI(TAG, "Sending libpax wifi count: %d", libpax_macs_wifi); payload.addCount(libpax_macs_wifi, MAC_SNIFF_WIFI); -#endif if (cfg.blescan) { -#if !(LIBPAX) - payload.addCount(macs_ble, MAC_SNIFF_BLE); -#else ESP_LOGI(TAG, "Sending libpax ble count: %d", libpax_macs_ble); payload.addCount(libpax_macs_ble, MAC_SNIFF_BLE); -#endif } #endif #if (HAS_GPS) @@ -117,125 +103,117 @@ void sendData() { } #endif #if (PAYLOAD_OPENSENSEBOX) -#if !(LIBPAX) - payload.addCount(macs_wifi, MAC_SNIFF_WIFI); -#else ESP_LOGI(TAG, "Sending libpax wifi count: %d", libpax_macs_wifi); payload.addCount(libpax_macs_wifi, MAC_SNIFF_WIFI); -#endif if (cfg.blescan) { -#if !(LIBPAX) - payload.addCount(macs_ble, MAC_SNIFF_BLE); -#else ESP_LOGI(TAG, "Sending libpax ble count: %d", libpax_macs_ble); payload.addCount(libpax_macs_ble, MAC_SNIFF_BLE); #endif -#endif #if (HAS_SDS011) - sds011_store(&sds_status); - payload.addSDS(sds_status); + sds011_store(&sds_status); + payload.addSDS(sds_status); #endif - SendPayload(COUNTERPORT); - // clear counter if not in cumulative counter mode - if (cfg.countermode != 1) { - reset_counters(); // clear macs container and reset all counters - ESP_LOGI(TAG, "Counter cleared"); - } + SendPayload(COUNTERPORT); + // clear counter if not in cumulative counter mode + if (cfg.countermode != 1) { + reset_counters(); // clear macs container and reset all counters + ESP_LOGI(TAG, "Counter cleared"); + } #ifdef HAS_DISPLAY - else - dp_plotCurve(macs.size(), true); + else + dp_plotCurve(macs.size(), true); #endif - break; + break; #endif #if (HAS_BME) - case MEMS_DATA: - payload.reset(); - payload.addBME(bme_status); - SendPayload(BMEPORT); - break; + case MEMS_DATA: + payload.reset(); + payload.addBME(bme_status); + SendPayload(BMEPORT); + break; #endif #if (HAS_GPS) - case GPS_DATA: - if (GPSPORT != COUNTERPORT) { - // send GPS position only if we have a fix - if (gps_hasfix()) { - gps_storelocation(&gps_status); - payload.reset(); - payload.addGPS(gps_status); - SendPayload(GPSPORT); - } else - ESP_LOGD(TAG, "No valid GPS position"); - } - break; + case GPS_DATA: + if (GPSPORT != COUNTERPORT) { + // send GPS position only if we have a fix + if (gps_hasfix()) { + gps_storelocation(&gps_status); + payload.reset(); + payload.addGPS(gps_status); + SendPayload(GPSPORT); + } else + ESP_LOGD(TAG, "No valid GPS position"); + } + break; #endif #if (HAS_SENSORS) #if (HAS_SENSOR_1) - case SENSOR1_DATA: - payload.reset(); - payload.addSensor(sensor_read(1)); - SendPayload(SENSOR1PORT); + case SENSOR1_DATA: + payload.reset(); + payload.addSensor(sensor_read(1)); + SendPayload(SENSOR1PORT); #if (COUNT_ENS) - if (cfg.countermode != 1) - cwa_clear(); + if (cfg.countermode != 1) + cwa_clear(); #endif - break; + break; #endif #if (HAS_SENSOR_2) - case SENSOR2_DATA: - payload.reset(); - payload.addSensor(sensor_read(2)); - SendPayload(SENSOR2PORT); - break; + case SENSOR2_DATA: + payload.reset(); + payload.addSensor(sensor_read(2)); + SendPayload(SENSOR2PORT); + break; #endif #if (HAS_SENSOR_3) - case SENSOR3_DATA: - payload.reset(); - payload.addSensor(sensor_read(3)); - SendPayload(SENSOR3PORT); - break; + case SENSOR3_DATA: + payload.reset(); + payload.addSensor(sensor_read(3)); + SendPayload(SENSOR3PORT); + break; #endif #endif #if (defined BAT_MEASURE_ADC || defined HAS_PMU) - case BATT_DATA: - payload.reset(); - payload.addVoltage(read_voltage()); - SendPayload(BATTPORT); - break; + case BATT_DATA: + payload.reset(); + payload.addVoltage(read_voltage()); + SendPayload(BATTPORT); + break; #endif - } // switch - bitmask &= ~mask; - mask <<= 1; - } // while (bitmask) -} // sendData() + } // switch + bitmask &= ~mask; + mask <<= 1; + } // while (bitmask) + } // sendData() -void flushQueues(void) { - rcmd_queuereset(); + void flushQueues(void) { + rcmd_queuereset(); #if (HAS_LORA) - lora_queuereset(); + lora_queuereset(); #endif #ifdef HAS_SPI - spi_queuereset(); + spi_queuereset(); #endif #ifdef HAS_MQTT - mqtt_queuereset(); + mqtt_queuereset(); #endif -} + } -bool allQueuesEmtpy(void) { - uint32_t rc = rcmd_queuewaiting(); + bool allQueuesEmtpy(void) { + uint32_t rc = rcmd_queuewaiting(); #if (HAS_LORA) - rc += lora_queuewaiting(); + rc += lora_queuewaiting(); #endif #ifdef HAS_SPI - rc += spi_queuewaiting(); + rc += spi_queuewaiting(); #endif #ifdef HAS_MQTT - rc += mqtt_queuewaiting(); + rc += mqtt_queuewaiting(); #endif - return (rc == 0) ? true : false; -} + return (rc == 0) ? true : false; + } diff --git a/src/sensor.cpp b/src/sensor.cpp index 559fd60d..60c14888 100644 --- a/src/sensor.cpp +++ b/src/sensor.cpp @@ -5,7 +5,6 @@ #if (COUNT_ENS) #include "payload.h" #include "corona.h" -#include "macsniff.h" extern PayloadConvert payload; #endif diff --git a/src/wifiscan.cpp b/src/wifiscan.cpp deleted file mode 100644 index fd929519..00000000 --- a/src/wifiscan.cpp +++ /dev/null @@ -1,107 +0,0 @@ -#if !(LIBPAX) -// Basic Config -#include "globals.h" -#include "wifiscan.h" - -// Local logging tag -static const char TAG[] = "wifi"; - -TimerHandle_t WifiChanTimer; - -typedef struct { - unsigned frame_ctrl : 16; - unsigned duration_id : 16; - uint8_t addr1[6]; // receiver address - uint8_t addr2[6]; // sender address - uint8_t addr3[6]; // filtering address - unsigned sequence_ctrl : 16; - uint8_t addr4[6]; // optional -} wifi_ieee80211_mac_hdr_t; - -typedef struct { - wifi_ieee80211_mac_hdr_t hdr; - uint8_t payload[0]; // network data ended with 4 bytes csum (CRC32) -} wifi_ieee80211_packet_t; - -// using IRAM_ATTR here to speed up callback function -IRAM_ATTR void wifi_sniffer_packet_handler(void *buff, - wifi_promiscuous_pkt_type_t type) { - - const wifi_promiscuous_pkt_t *ppkt = (wifi_promiscuous_pkt_t *)buff; - const wifi_ieee80211_packet_t *ipkt = - (wifi_ieee80211_packet_t *)ppkt->payload; - const wifi_ieee80211_mac_hdr_t *hdr = &ipkt->hdr; - -// process seen MAC -#if MACFILTER - // we guess it's a smartphone, if U/L bit #2 of MAC is set - // bit #2 = 1 -> local mac (randomized) / bit #2 = 0 -> universal mac - if ((hdr->addr2[0] & 0b10) == 0) - return; - else -#endif - mac_add((uint8_t *)hdr->addr2, ppkt->rx_ctrl.rssi, MAC_SNIFF_WIFI); -} - -// Software-timer driven Wifi channel rotation callback function -void switchWifiChannel(TimerHandle_t xTimer) { - channel = - (channel % WIFI_CHANNEL_MAX) + 1; // rotate channel 1..WIFI_CHANNEL_MAX - esp_wifi_set_channel(channel, WIFI_SECOND_CHAN_NONE); -} - -void wifi_sniffer_init(void) { - - wifi_country_t wifi_country = {WIFI_MY_COUNTRY, WIFI_CHANNEL_MIN, - WIFI_CHANNEL_MAX, 100, - WIFI_COUNTRY_POLICY_MANUAL}; - - wifi_init_config_t wifi_cfg = WIFI_INIT_CONFIG_DEFAULT(); - wifi_cfg.event_handler = NULL; // we don't need a wifi event handler - wifi_cfg.nvs_enable = 0; // we don't need any wifi settings from NVRAM - wifi_cfg.wifi_task_core_id = 0; // we want wifi task running on core 0 - - wifi_promiscuous_filter_t wifi_filter = {.filter_mask = - WIFI_PROMIS_FILTER_MASK_MGMT | - WIFI_PROMIS_FILTER_MASK_DATA}; - - esp_wifi_init(&wifi_cfg); // start Wifi task - esp_wifi_set_country(&wifi_country); // set locales for RF and channels - esp_wifi_set_storage(WIFI_STORAGE_RAM); - esp_wifi_set_mode(WIFI_MODE_NULL); - esp_wifi_set_ps(WIFI_PS_NONE); // no modem power saving - esp_wifi_set_promiscuous_filter(&wifi_filter); // set frame filter - esp_wifi_set_promiscuous_rx_cb(&wifi_sniffer_packet_handler); - - // setup wifi channel hopping timer - WifiChanTimer = xTimerCreate("WifiChannelTimer", - (cfg.wifichancycle > 0) - ? pdMS_TO_TICKS(cfg.wifichancycle * 10) - : pdMS_TO_TICKS(50), - pdTRUE, (void *)0, switchWifiChannel); -} - -void switch_wifi_sniffer(uint8_t state) { - if (state) { -// start sniffer -#if (BLECOUNTER) - // workaround needed for ESP-IDF v3.3 - // see https://github.com/espressif/esp-idf/issues/5427 - esp_wifi_set_ps(WIFI_PS_MIN_MODEM); -#endif - esp_wifi_start(); - esp_wifi_set_promiscuous(true); - esp_wifi_set_channel(WIFI_CHANNEL_MIN, WIFI_SECOND_CHAN_NONE); - // start channel hopping timer - if (cfg.wifichancycle > 0) - xTimerStart(WifiChanTimer, (TickType_t)0); - } else { - // start channel hopping timer - if (xTimerIsTimerActive(WifiChanTimer) != pdFALSE) - xTimerStop(WifiChanTimer, (TickType_t)0); - // stop sniffer - esp_wifi_set_promiscuous(false); - esp_wifi_stop(); - } -} -#endif // !(LIBPAX) \ No newline at end of file