Merge pull request #258 from cyberman54/master

sync dev with master

README.md

@@ -7,7 +7,8 @@
 <img src="img/Paxcounter-ttgo.jpg">
 <img src="img/Paxcounter-lolin.gif">
 <img src="img/Paxcounter-Screen.png">
-<img src="img/paxcounter-curves.jpg">
+<img src="img/TTGO-case.jpg">
+<img src="img/TTGO-curves.jpg">
 
 # Use case
 
@@ -55,9 +56,14 @@ Depending on board hardware following features are supported:
 Target platform must be selected in [platformio.ini](https://github.com/cyberman54/ESP32-Paxcounter/blob/master/platformio.ini).<br>
 Hardware dependent settings (pinout etc.) are stored in board files in /hal directory. If you want to use a ESP32 board which is not yet supported, use hal file generic.h and tailor pin mappings to your needs. Pull requests for new boards welcome.<br>
 
-<b>3D printable cases</b> can be found (and, if wanted so, ordered) on Thingiverse, see 
-<A HREF="https://www.thingiverse.com/thing:2670713">Heltec</A>, <A HREF="https://www.thingiverse.com/thing:2811127">TTGOv2</A>, <A HREF="https://www.thingiverse.com/thing:3005574">TTGOv2.1</A>, <A HREF="https://www.thingiverse.com/thing:3041339">T-BEAM</A>,  
-<A HREF="https://www.thingiverse.com/thing:3203177">T-BEAM parts</A> for example.<br>
+Some <b>3D printable cases</b> can be found (and, if wanted so, ordered) on Thingiverse, see 
+<A HREF="https://www.thingiverse.com/thing:2670713">Heltec</A>, 
+<A HREF="https://www.thingiverse.com/thing:2811127">TTGOv2</A>, 
+<A HREF="https://www.thingiverse.com/thing:3005574">TTGOv2.1</A>, 
+<A HREF="https://www.thingiverse.com/thing:3385109">TTGO</A>,
+<A HREF="https://www.thingiverse.com/thing:3041339">T-BEAM</A>, 
+<A HREF="https://www.thingiverse.com/thing:3203177">T-BEAM parts</A>, 
+for example.<br>
 
 <b>Power consumption</b> was metered at around 450 - 1000mW, depending on board and user settings in paxcounter.conf.
 By default bluetooth sniffing is disabled (line *#define BLECOUNTER* in paxcounter.conf is commented out). Enabling bluetooth costs 30% more power + 30% flash storage for the software stack. Proof of concept showed that for passenger flow metering wifi sniffing shows better results than bluetooth sniffing. If you enable bluetooth be aware that this goes on expense of wifi sniffing results, because then wifi and bt stack must share the 2,4 GHz RF ressources of ESP32. If you need to sniff wifi and bt in parallel and need best possible results, use two boards - one for wifi only and one for bt only - and add counted results.

include/globals.h

@@ -4,6 +4,10 @@
 // The mother of all embedded development...
 #include <Arduino.h>
 
+// Time functions
+#include <Time.h>
+#include <Timezone.h>
+
 // std::set for unified array functions
 #include <set>
 #include <array>
@@ -102,6 +106,7 @@ extern std::array<uint64_t, 0xff>::iterator it;
 extern std::array<uint64_t, 0xff> beacons;
 
 extern TaskHandle_t irqHandlerTask, wifiSwitchTask;
+extern Timezone myTZ; // make Timezone myTZ globally available
 
 // application includes
 #include "led.h"

include/gpsread.h

@@ -2,7 +2,6 @@
 #define _GPSREAD_H
 
 #include <TinyGPS++.h> // library for parsing NMEA data
-#include <Time.h>
 
 #ifdef GPS_I2C // Needed for reading from I2C Bus
 #include <Wire.h>

include/lorawan.h

@@ -3,7 +3,6 @@
 
 #include "globals.h"
 #include "rcommand.h"
-#include <TimeLib.h>
 
 // LMIC-Arduino LoRaWAN Stack
 #include <lmic.h>

include/rtctime.h

@@ -2,8 +2,6 @@
 #define _RTCTIME_H
 
 #include "globals.h"
-#include <Time.h>
-#include <Timezone.h>
 #include <Wire.h> // must be included here so that Arduino library object file references work
 #include <RtcDS3231.h>
 
@@ -20,7 +18,6 @@ typedef enum {
 } clock_state_t;
 
 extern RtcDS3231<TwoWire> Rtc; // make RTC instance globally available
-extern Timezone myTZ; // make Timezone myTZ globally available
 
 int rtc_init(void);
 int set_rtctime(uint32_t UTCTime);

platformio.ini

@@ -6,7 +6,7 @@
 
 ; ---> SELECT TARGET PLATFORM HERE! <---
 [platformio]
-env_default = generic
+;env_default = generic
 ;env_default = ebox
 ;env_default = eboxtube
 ;env_default = heltec
@@ -24,7 +24,7 @@ env_default = generic
 ;env_default = lolin32lora
 ;env_default = lolin32lite
 ;env_default = octopus32
-;env_default = ebox, eboxtube, heltec, ttgobeam, lopy4, lopy, ttgov21old, ttgov21new
+env_default = ebox, eboxtube, heltec, ttgobeam, lopy4, lopy, ttgov21old, ttgov21new, ttgofox
 ;
 description = Paxcounter is a proof-of-concept ESP32 device for metering passenger flows in realtime. It counts how many mobile devices are around.
 

src/main.cpp

@@ -77,6 +77,11 @@ std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
 // initialize payload encoder
 PayloadConvert payload(PAYLOAD_BUFFER_SIZE);
 
+// set Time Zone, fetch user setting from paxcounter.conf
+TimeChangeRule myDST = DAYLIGHT_TIME;
+TimeChangeRule mySTD = STANDARD_TIME;
+Timezone myTZ(myDST, mySTD);
+
 // local Tag for logging
 static const char TAG[] = "main";
 

src/rtctime.cpp

@@ -7,11 +7,6 @@ static const char TAG[] = "main";
 
 RtcDS3231<TwoWire> Rtc(Wire); // RTC hardware i2c interface
 
-// set Time Zone, fetch user setting from paxcounter.conf
-TimeChangeRule myDST = DAYLIGHT_TIME;
-TimeChangeRule mySTD = STANDARD_TIME;
-Timezone myTZ(myDST, mySTD);
-
 // initialize RTC
 int rtc_init(void) {