Merge pull request #894 from cyberman54/development

Development

include/payload.h

@@ -100,6 +100,6 @@ private:
 };
 
 extern PayloadConvert payload;
-extern uint8_t batt_level;
+extern int8_t batt_level;
 
 #endif // _PAYLOAD_H_

include/power.h

@@ -131,6 +131,6 @@ static inline uint8_t linear(uint16_t voltage, uint16_t minVoltage,
          (maxVoltage - minVoltage);
 }
 
-uint8_t read_battlevel(mapFn_t mapFunction = &sigmoidal);
+int8_t read_battlevel(mapFn_t mapFunction = &sigmoidal);
 
 #endif

platformio_orig.ini

@@ -46,7 +46,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 3.3.1
+release_version = 3.3.2
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 3
@@ -71,11 +71,11 @@ lib_deps_rgbled =
 lib_deps_gps =
     mikalhart/TinyGPSPlus @ ^1.0.2
 lib_deps_sensors =
-    adafruit/Adafruit Unified Sensor @ ^1.1.4
+    adafruit/Adafruit Unified Sensor @ ^1.1.6
-    adafruit/Adafruit BME280 Library @ ^2.2.1
+    adafruit/Adafruit BME280 Library @ ^2.2.2
-    adafruit/Adafruit BMP085 Library @ ^1.2.0
+    adafruit/Adafruit BMP085 Library @ ^1.2.1
     boschsensortec/BSEC Software Library @ 1.6.1480
-    https://github.com/cyberman54/sds-dust-sensors-arduino-library.git
+    lewapek/Nova Fitness Sds dust sensors library @ ^1.5.1
 lib_deps_basic =
     https://github.com/dbSuS/libpax.git
     https://github.com/SukkoPera/Arduino-Rokkit-Hash.git
@@ -83,7 +83,7 @@ lib_deps_basic =
     makuna/RTC @ ^2.3.5
     spacehuhn/SimpleButton 
     lewisxhe/XPowersLib @ ^0.1.4
-    256dpi/MQTT @ ^2.4.8
+    256dpi/MQTT @ ^2.5.0
 lib_deps_all =
     ${common.lib_deps_basic}
     ${common.lib_deps_lora}

src/display.cpp

@@ -226,10 +226,10 @@ void dp_refresh(bool nextPage) {
     // line 4: Battery + GPS status + Wifi channel
     // B:a.bcV Sats:ab ch:ab
 #if (defined BAT_MEASURE_ADC || defined HAS_PMU || defined HAS_IP5306)
-    if (batt_level == 0)
+    if (batt_level > 0)
-      dp->printf("No batt   ");
-    else
       dp->printf("Batt:%3u%% ", batt_level);
+    else
+      dp->printf("No batt   ");
 #else
     dp->printf("          ");
 #endif

src/power.cpp

@@ -5,7 +5,7 @@
 // Local logging tag
 static const char TAG[] = __FILE__;
 
-uint8_t batt_level = 0; // display value
+int8_t batt_level = -1; // percent batt level, global variable, -1 means no batt
 
 #ifdef BAT_MEASURE_ADC
 esp_adc_cal_characteristics_t *adc_characs =
@@ -92,11 +92,11 @@ void AXP192_showstatus(void) {
   if (pmu.isBatteryConnect())
     if (pmu.isCharging())
       ESP_LOGI(TAG, "Battery charging, %.2fV @ %.0fmAh",
-               pmu.getBattVoltage() / 1000, pmu.getBatteryChargeCurrent());
+               pmu.getBattVoltage() / 1000.0, pmu.getBatteryChargeCurrent());
     else
       ESP_LOGI(TAG, "Battery not charging");
   else
-    ESP_LOGI(TAG, "No Battery");
+    ESP_LOGI(TAG, "Battery not present");
 
   if (pmu.isVbusIn())
     ESP_LOGI(TAG, "USB powered, %.0fmW",
@@ -142,10 +142,14 @@ void AXP192_init(void) {
     // clear all interrupt flags
     pmu.clearIrqStatus();
     // enable the required interrupt function
-    pmu.enableIRQ(XPOWERS_AXP192_BAT_INSERT_IRQ | XPOWERS_AXP192_BAT_REMOVE_IRQ |   // BATTERY
+    pmu.enableIRQ(XPOWERS_AXP192_BAT_INSERT_IRQ |
-                  XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_VBUS_REMOVE_IRQ | // VBUS
+                  XPOWERS_AXP192_BAT_REMOVE_IRQ | // BATTERY
-                  XPOWERS_AXP192_PKEY_SHORT_IRQ | XPOWERS_AXP192_PKEY_LONG_IRQ | // POWER KEY
+                  XPOWERS_AXP192_VBUS_INSERT_IRQ |
-                  XPOWERS_AXP192_BAT_CHG_DONE_IRQ | XPOWERS_AXP192_BAT_CHG_START_IRQ // CHARGE
+                  XPOWERS_AXP192_VBUS_REMOVE_IRQ | // VBUS
+                  XPOWERS_AXP192_PKEY_SHORT_IRQ |
+                  XPOWERS_AXP192_PKEY_LONG_IRQ | // POWER KEY
+                  XPOWERS_AXP192_BAT_CHG_DONE_IRQ |
+                  XPOWERS_AXP192_BAT_CHG_START_IRQ // CHARGE
     );
 #endif // PMU_INT
 
@@ -231,14 +235,13 @@ uint16_t read_voltage(void) {
   return voltage;
 }
 
-uint8_t read_battlevel(mapFn_t mapFunction) {
+int8_t read_battlevel(mapFn_t mapFunction) {
   // returns the estimated battery level in values 0 ... 100 [percent]
   uint8_t batt_percent = 0;
 #ifdef HAS_IP5306
   batt_percent = IP5306_GetBatteryLevel();
 #elif defined HAS_PMU
-  int bp = pmu.getBatteryPercent();
+  batt_percent = pmu.getBatteryPercent();
-  batt_percent = bp < 0 ? 0 : bp;
 #else
   const uint16_t batt_voltage = read_voltage();
   if (batt_voltage <= BAT_MIN_VOLTAGE)
@@ -260,7 +263,7 @@ uint8_t read_battlevel(mapFn_t mapFunction) {
   // we calculate the applicable value from MCMD_DEVS_BATT_MIN to
   // MCMD_DEVS_BATT_MAX from batt_percent value
 
-  if (batt_percent == 0)
+  if (batt_percent == -1)
     LMIC_setBatteryLevel(MCMD_DEVS_BATT_NOINFO);
   else
     LMIC_setBatteryLevel(batt_percent / 100.0 *
@@ -282,7 +285,7 @@ uint8_t read_battlevel(mapFn_t mapFunction) {
 
 bool batt_sufficient() {
 #if (defined HAS_PMU || defined BAT_MEASURE_ADC || defined HAS_IP5306)
-  if (batt_level) // we have a battery voltage
+  if (batt_level > 0) // we have a battery percent value
     return (batt_level > OTA_MIN_BATT);
   else
 #endif