Merge remote-tracking branch 'refs/remotes/origin/master'

README.md

@@ -282,8 +282,8 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
 
 **Port #1:** Paxcount data
 
-	byte 1-2:	Number of unique devices, seen on Wifi
+	byte 1-2:	Number of unique devices, seen on Wifi [00 00 if Wifi scan disabled]
-	byte 3-4:	Number of unique devices, seen on Bluetooth [ommited if BT disabled]
+	byte 3-4:	Number of unique devices, seen on Bluetooth [ommited if BT scan disabled]
 
 **Port #2:** Device status query result
 
@@ -542,9 +542,9 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
 	
 # License
 
-Copyright  2018 Oliver Brandmueller <ob@sysadm.in>
+Copyright  2018-2020 Oliver Brandmueller <ob@sysadm.in>
 
-Copyright  2018 Klaus Wilting <verkehrsrot@arcor.de>
+Copyright  2018-2020 Klaus Wilting <verkehrsrot@arcor.de>
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

src/hal/ttgobeam.h

@@ -33,7 +33,7 @@
 //#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
 
 // display (if connected)
-#define HAS_DISPLAY 1
+//#define HAS_DISPLAY 1
 #define MY_DISPLAY_SDA SDA
 #define MY_DISPLAY_SCL SCL
 #define MY_DISPLAY_RST NOT_A_PIN

src/loraconf_abp.cpp

@@ -39,8 +39,8 @@ void setABPParameters() {
     // devices' ping slots. LMIC does not have an easy way to define set this
     // frequency and support for class B is spotty and untested, so this
     // frequency is not configured here.
-    #elif defined(CFG_us915)
+    #elif defined(CFG_us915) || defined(CFG_au915)
-    // NA-US channels 0-71 are configured automatically
+    // NA-US and AU channels 0-71 are configured automatically
     // but only one group of 8 should (a subband) should be active
     // TTN recommends the second sub band, 1 in a zero based count.
     // https://github.com/TheThingsNetwork/gateway-conf/blob/master/US-global_conf.json

src/lorawan.cpp

@@ -495,10 +495,9 @@ uint8_t myBattLevelCb(void *pUserData) {
 #elif defined HAS_IP5306
       if (IP5306_GetPowerSource())
     return MCMD_DEVS_EXT_POWER;
-#else
-    return (batt_percent / 100.0 *
-            (MCMD_DEVS_BATT_MAX - MCMD_DEVS_BATT_MIN + 1));
 #endif // HAS_PMU
+
+  return (batt_percent / 100.0 * (MCMD_DEVS_BATT_MAX - MCMD_DEVS_BATT_MIN + 1));
 }
 
 // event EV_RXCOMPLETE message handler
@@ -582,7 +581,8 @@ const char *getCrName(rps_t rps) {
 
 #if (VERBOSE)
 // decode LORAWAN MAC message
-// see https://github.com/mcci-catena/arduino-lmic/blob/master/doc/LoRaWAN-at-a-glance.pdf
+// see
+// https://github.com/mcci-catena/arduino-lmic/blob/master/doc/LoRaWAN-at-a-glance.pdf
 void mac_decode(const uint8_t cmd[], const uint8_t cmdlen, bool is_down) {
 
   if (!cmdlen)

src/macsniff.cpp

@@ -116,7 +116,7 @@ uint16_t mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type) {
     } // added
 
     // Log scan result
-    ESP_LOGD(TAG,
+    ESP_LOGV(TAG,
              "%s %s RSSI %ddBi -> salted MAC %s -> Hash %04X -> WiFi:%d  "
              "BLTH:%d "
 #if (COUNT_ENS)

src/main.cpp

@@ -2,8 +2,8 @@
 
 //////////////////////// ESP32-Paxcounter \\\\\\\\\\\\\\\\\\\\\\\\\\
 
-Copyright  2018 Oliver Brandmueller <ob@sysadm.in>
+Copyright  2018-2020 Oliver Brandmueller <ob@sysadm.in>
-Copyright  2018 Klaus Wilting <verkehrsrot@arcor.de>
+Copyright  2018-2020 Klaus Wilting <verkehrsrot@arcor.de>
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

src/senddata.cpp

@@ -59,7 +59,8 @@ void SendPayload(uint8_t port, sendprio_t prio) {
   if (port == COUNTERPORT) {
     sdcardWriteData(macs_wifi, macs_ble
 #if (COUNT_ENS)
-       , cwa_report()
+                    ,
+                    cwa_report()
 #endif
     );
   }
@@ -86,7 +87,6 @@ void sendData() {
     case COUNT_DATA:
       payload.reset();
 #if !(PAYLOAD_OPENSENSEBOX)
-      if (cfg.wifiscan)
       payload.addCount(macs_wifi, MAC_SNIFF_WIFI);
       if (cfg.blescan)
         payload.addCount(macs_ble, MAC_SNIFF_BLE);
@@ -102,7 +102,6 @@ void sendData() {
       }
 #endif
 #if (PAYLOAD_OPENSENSEBOX)
-      if (cfg.wifiscan)
       payload.addCount(macs_wifi, MAC_SNIFF_WIFI);
       if (cfg.blescan)
         payload.addCount(macs_ble, MAC_SNIFF_BLE);

src/sensor.cpp

@@ -54,7 +54,8 @@ uint8_t *sensor_read(uint8_t sensor) {
 
   case 1:
 
-    // insert user specific sensor data frames here */
+    // insert user specific sensor data frames here
+    // note: Sensor1 fields are used for ENS count, if ENS detection enabled
 #if (COUNT_ENS)
     payload.addCount(cwa_report(), MAC_SNIFF_BLE_CWA);
 #else

src/timekeeper.cpp

@@ -35,8 +35,10 @@ void calibrateTime(void) {
   timesync_request();
 #endif
 
-  // (only!) if we lost time, we try to fallback to local time source RTS or GPS
+  // if no LORA timesource is available, or if we lost time, then fallback to
-  if (timeSource == _unsynced) {
+  // local time source RTS or GPS
+  if (((!TIME_SYNC_LORASERVER) && (!TIME_SYNC_LORAWAN)) ||
+      (timeSource == _unsynced)) {
 
 // has RTC -> fallback to RTC time
 #ifdef HAS_RTC
@@ -50,7 +52,6 @@ void calibrateTime(void) {
     timeSource = _gps;
 #endif
 
-    if (t)
     setMyTime((uint32_t)t, t_msec, timeSource); // set time
 
   } // fallback