display library select added

src/hal/ecopower.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board esp32dev
+// display_library lib_deps_oled_display
 
 #ifndef _GENERIC_H
 #define _GENERIC_H

src/hal/generic.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 115200
 // board esp32dev
+// display_library lib_deps_oled_display
 
 #ifndef _GENERIC_H
 #define _GENERIC_H

src/hal/heltec.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board heltec_wifi_lora_32
+// display_library lib_deps_oled_display
 
 #ifndef _HELTEC_H
 #define _HELTEC_H

src/hal/heltecv2.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board heltec_wifi_lora_32_V2
+// display_library lib_deps_oled_display
 
 #ifndef _HELTECV2_H
 #define _HELTECV2_H

src/hal/lolin32lora.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board lolin32
+// display_library lib_deps_oled_display
 
 #ifndef _LOLINLORA_H
 #define _LOLINLORA_H

src/hal/m5core.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board m5stack-core-esp32
+// display_library lib_deps_tft_display
 
 #ifndef _M5CORE_H
 #define _M5CORE_H
@@ -38,7 +39,12 @@
 #define HAS_LED NOT_A_PIN // no on board LED (?)
 #define HAS_BUTTON (39) // on board button A
 
-#define HAS_IP5306 1
+// power management settings
+#define HAS_IP5306 1 // has IP5306 chip
+#define PMU_CHG_CURRENT 2 // battery charge current
+// possible values: 0:200mA, 1:400mA, *2:500mA, 3:600mA
+#define PMU_CHG_CUTOFF 0 // battery charge cutoff
+// possible values: *0:4.2V, 1:4.3V, 2:4.35V, 3:4.4V
 
 // GPS settings
 #define HAS_GPS 1 // use on board GPS

src/hal/m5fire.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board m5stack-fire
+// display_library lib_deps_tft_display
 
 #ifndef _M5FIRE_H
 #define _M5FIRE_H
@@ -41,7 +42,12 @@
 #define HAS_RGB_LED SmartLed rgb_led(LED_SK6812, RGB_LED_COUNT, GPIO_NUM_15) // LED_SK6812 RGB LED on GPIO15
 #define HAS_BUTTON (39) // on board button A
 
-#define HAS_IP5306 1
+// power management settings
+#define HAS_IP5306 1 // has IP5306 chip
+#define PMU_CHG_CURRENT 2 // battery charge current
+// possible values: 0:200mA, 1:400mA, *2:500mA, 3:600mA
+#define PMU_CHG_CUTOFF 0 // battery charge cutoff
+// possible values: *0:4.2V, 1:4.3V, 2:4.35V, 3:4.4V
 
 // GPS settings
 #define HAS_GPS 0 // use on board GPS

src/hal/octopus32.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board featheresp32
+// display_library lib_deps_oled_display
 
 #ifndef _OCTOPUS_H
 #define _OCTOPUS_H

src/hal/ttgobeam.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board ttgo-t-beam
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOBEAM_H
 #define _TTGOBEAM_H

src/hal/ttgobeam10.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board ttgo-t-beam
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOBEAM_H
 #define _TTGOBEAM_H
@@ -29,13 +30,18 @@ Reset -> reset device
 #define HAS_LORA 1       // comment out if device shall not send data via LoRa
 #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
 #define HAS_BUTTON GPIO_NUM_38 // middle on board button
-#define HAS_PMU 1 // AXP192 power management chip
-#define PMU_INT GPIO_NUM_35 // AXP192 interrupt
-#define PMU_CHGC AXP1XX_CHARGE_CUR_1000MA // AXP102 battery charge current
-// possible AXP192 battery charge current values (mA):
-// 100/190/280/360/450/550/630/700/780/880/960/1000/1080/1160/1240/1320
 #define HAS_LED NOT_A_PIN
 
+// power management settings
+#define HAS_PMU 1 // has AXP192 chip
+#define PMU_INT GPIO_NUM_35 // battery interrupt
+#define PMU_CHG_CURRENT AXP1XX_CHARGE_CUR_1000MA // battery charge current
+// possible values (mA):
+// 100/190/280/360/450/550/630/700/780/880/960/1000/1080/1160/1240/1320
+#define PMU_CHG_CUTOFF AXP202_TARGET_VOL_4_2V // battery charge cutoff
+// possible values (V):
+// 4_1/4_15/4_2/4_36
+
 // GPS settings
 #define HAS_GPS 1 // use on board GPS
 #define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_34, GPIO_NUM_12 // UBlox NEO 6M

src/hal/ttgofox.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board esp32dev
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOFOX_H
 #define _TTGOFOX_H

src/hal/ttgov1.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 115200
 // board ttgo-lora32-v1
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOV1_H
 #define _TTGOV1_H

src/hal/ttgov2.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board ttgo-lora32-v1
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOV2_H
 #define _TTGOV2_H

src/hal/ttgov21new.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board esp32dev
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOV21NEW_H
 #define _TTGOV21NEW_H

src/hal/ttgov21old.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board esp32dev
+// display_library lib_deps_oled_display
 
 #ifndef _TTGOV21OLD_H
 #define _TTGOV21OLD_H

src/hal/wemos32oled.h

@@ -1,6 +1,7 @@
 // clang-format off
 // upload_speed 921600
 // board lolin32
+// display_library lib_deps_oled_display
 
 #ifndef _WEMOS32OLED_H
 #define _WEMOS32OLED_H