add tinyPICO board

platformio.ini

@@ -28,6 +28,7 @@ halfile = generic.h
 ;halfile = wemos32oled.h
 ;halfile = wemos32matrix.h
 ;halfile = octopus32.h
+;halfile = tinypico.h
 
 [platformio]
 ; upload firmware to board with usb cable
@@ -40,7 +41,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.7.91
+release_version = 1.7.92
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 3

src/hal/eboxtube.h

@@ -14,7 +14,7 @@
 #define CFG_sx1276_radio 1
 
 #define HAS_LED (22)     // Green LED on board
-#define HAS_RGB_LED (2)  // WS2812B RGB LED on board
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_2) // WS2812B RGB LED on board
 #define HAS_BUTTON (0)   // button "FLASH" on board
 #define DISABLE_BROWNOUT 1      // comment out if you want to keep brownout feature
 

src/hal/fipy.h

@@ -13,7 +13,7 @@
 
 #define CFG_sx1272_radio 1
 #define HAS_LED NOT_A_PIN      // FiPy has no on board LED, so we use RGB LED
-#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0
 #define BOARD_HAS_PSRAM        // use extra 4MB extern RAM
 
 // Pins for LORA chip SPI interface, reset line and interrupt lines

src/hal/generic.h

@@ -51,7 +51,7 @@
 
 #define HAS_LED (21) // on board  LED
 #define HAS_BUTTON (39) // on board button
-#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0
 
 // GPS settings
 #define HAS_GPS 1 // use on board GPS

src/hal/lolin32litelora.h

@@ -17,7 +17,7 @@
 //#define DISPLAY_FLIP  1 // uncomment this for rotated display
 #define HAS_LED       22  // ESP32 GPIO12 (pin22) On Board LED
 #define LED_ACTIVE_LOW 1  // Onboard LED is active when pin is LOW
-#define HAS_RGB_LED   13  // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_13) // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
 #define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 #define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 

src/hal/lolin32lora.h

@@ -18,7 +18,7 @@
 #define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it
 #define LED_ACTIVE_LOW 1  // Onboard LED is active when pin is LOW
                           // Anyway shield is on over the LoLin32 board, so we won't be able to see this LED
-#define HAS_RGB_LED   13  // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_13) // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
 #define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 #define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 

src/hal/lopy.h

@@ -12,7 +12,7 @@
 #define HAS_LORA 1       // comment out if device shall not send data via LoRa
 #define CFG_sx1272_radio 1
 #define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
-#define HAS_RGB_LED (0)  // WS2812B RGB LED on GPIO0
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0 (P2)
 
 // Note: Pins for LORA chip SPI interface come from board file pins_arduino.h
 

src/hal/lopy4.h

@@ -20,8 +20,8 @@
 //#define SPI_CS    GPIO_NUM_36
 
 #define CFG_sx1276_radio 1
-//#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
+#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
-#define HAS_RGB_LED (0)  // WS2812B RGB LED on GPIO0 (P2)
+#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_0) // WS2812B RGB LED on GPIO0 (P2)
 #define BOARD_HAS_PSRAM // use extra 4MB extern RAM
 
 // Note: Pins for LORA chip SPI interface come from board file pins_arduino.h

src/hal/octopus32.h

@@ -23,7 +23,7 @@
 
 #define HAS_LED        13  // ESP32 GPIO12 (pin22) On Board LED
 //#define LED_ACTIVE_LOW 1  // Onboard LED is active when pin is LOW
-//#define HAS_RGB_LED   13  // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
+//#define HAS_RGB_LED SmartLed rgb_led(LED_WS2812, 1, GPIO_NUM_13) // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
 //#define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 //#define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 

src/hal/tinypico.h

@@ -0,0 +1,24 @@
+// clang-format off
+// upload_speed 921600
+// board esp32dev
+
+
+#ifndef _TINYPICO_H
+#define _TINYPICO_H
+
+#include <stdint.h>
+
+// Hardware related definitions for crowdsupply tinypico board
+
+#define HAS_LED NOT_A_PIN     // Green LED on board
+#define HAS_RGB_LED Apa102 rgb_led(1, GPIO_NUM_12, GPIO_NUM_2) // APA102 RGB LED on board
+
+//#define DISABLE_BROWNOUT 1      // comment out if you want to keep brownout feature
+#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
+#define BAT_VOLTAGE_DIVIDER 2.7625f // voltage divider 160k/442k on board
+#define BOARD_HAS_PSRAM // use extra 4MB external RAM
+#define LED_POWER_SW (13) // switches LED power
+#define LED_POWER_ON 0 // switch on transistor for LED power
+#define LED_POWER_OFF 1
+
+#endif

src/led.cpp

@@ -14,7 +14,7 @@ unsigned long LEDBlinkStarted = 0; // When (in millis() led blink started)
 #ifdef HAS_RGB_LED
 
 // RGB Led instance
-SmartLed rgb_led(LED_WS2812, 1, HAS_RGB_LED);
+HAS_RGB_LED;
 
 float rgb_CalcColor(float p, float q, float t) {
   if (t < 0.0f)

src/main.cpp

@@ -195,17 +195,25 @@ void setup() {
 #if (HAS_LED != NOT_A_PIN)
   pinMode(HAS_LED, OUTPUT);
   strcat_P(features, " LED");
+
+#ifdef LED_POWER_SW
+  pinMode(LED_POWER_SW, OUTPUT);
+  digitalWrite(LED_POWER_SW, LED_POWER_ON);
+#endif
+
 #ifdef HAS_TWO_LED
   pinMode(HAS_TWO_LED, OUTPUT);
   strcat_P(features, " LED1");
 #endif
+
 // use LED for power display if we have additional RGB LED, else for status
 #ifdef HAS_RGB_LED
   switch_LED(LED_ON);
   strcat_P(features, " RGB");
   rgb_set_color(COLOR_PINK);
 #endif
-#endif
+
+#endif // HAS_LED
 
 #if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
   // start led loop

src/paxcounter.conf

@@ -72,7 +72,7 @@
 #define TIME_SYNC_INTERVAL_RETRY        10      // retry time sync after lost sync each .. minutes [default = 10], 0 means off
 #define TIME_SYNC_COMPILEDATE           0       // set to 1 to use compile date to initialize RTC after power outage [default = 0]
 #define TIME_SYNC_LORAWAN               0       // set to 1 to use LORA network as time source, 0 means off [default = 0]
-#define TIME_SYNC_LORASERVER            1       // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
+#define TIME_SYNC_LORASERVER            0       // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
 
 // settings for syncing time with timeserver applications
 #define TIME_SYNC_SAMPLES               1       // number of time requests for averaging