Changed Lora SF to Lora DR control

src/TTN/packed_decoder.js

@@ -37,7 +37,7 @@ function Decoder(bytes, port) {
 
     if (port === 3) {
         // device config data      
-        return decode(bytes, [uint8, uint8, int16, uint8, uint8, uint8, uint8, bitmap1, bitmap2, version], ['lorasf', 'txpower', 'rssilimit', 'sendcycle', 'wifichancycle', 'blescantime', 'rgblum', 'flags', 'payloadmask', 'version']);
+        return decode(bytes, [uint8, uint8, int16, uint8, uint8, uint8, uint8, bitmap1, bitmap2, version], ['loradr', 'txpower', 'rssilimit', 'sendcycle', 'wifichancycle', 'blescantime', 'rgblum', 'flags', 'payloadmask', 'version']);
     }
 
     if (port === 4) {

src/configmanager.cpp

@@ -9,19 +9,20 @@ nvs_handle my_handle;
 esp_err_t err;
 
 #define PAYLOADMASK                                                            \
-  ((GPS_DATA | ALARM_DATA | MEMS_DATA | COUNT_DATA | SENSOR1_DATA |             \
-   SENSOR2_DATA | SENSOR3_DATA) & ~BATT_DATA)
+  ((GPS_DATA | ALARM_DATA | MEMS_DATA | COUNT_DATA | SENSOR1_DATA |            \
+    SENSOR2_DATA | SENSOR3_DATA) &                                             \
+   ~BATT_DATA)
 
 // populate cfg vars with factory settings
 void defaultConfig() {
-  cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora sf, see pacounter.conf
-  cfg.txpower = 15;           // 2-15, lora tx power
-  cfg.adrmode = 1;            // 0=disabled, 1=enabled
-  cfg.screensaver = 0;        // 0=disabled, 1=enabled
-  cfg.screenon = 1;           // 0=disabled, 1=enabled
-  cfg.countermode = 0;        // 0=cyclic, 1=cumulative, 2=cyclic confirmed
-  cfg.rssilimit = 0;          // threshold for rssilimiter, negative value!
-  cfg.sendcycle = SENDCYCLE;  // payload send cycle [seconds/2]
+  cfg.loradr = LORADRDEFAULT;     // 0-15, lora datarate, see pacounter.conf
+  cfg.txpower = LORATXPOWDEFAULT; // 0-15, lora tx power
+  cfg.adrmode = 1;                // 0=disabled, 1=enabled
+  cfg.screensaver = 0;            // 0=disabled, 1=enabled
+  cfg.screenon = 1;               // 0=disabled, 1=enabled
+  cfg.countermode = 0;            // 0=cyclic, 1=cumulative, 2=cyclic confirmed
+  cfg.rssilimit = 0;              // threshold for rssilimiter, negative value!
+  cfg.sendcycle = SENDCYCLE;      // payload send cycle [seconds/2]
   cfg.wifichancycle =
       WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
   cfg.blescantime =
@@ -96,9 +97,9 @@ void saveConfig() {
         strcmp(storedversion, cfg.version) != 0)
       nvs_set_str(my_handle, "version", cfg.version);
 
-    if (nvs_get_i8(my_handle, "lorasf", &flash8) != ESP_OK ||
-        flash8 != cfg.lorasf)
-      nvs_set_i8(my_handle, "lorasf", cfg.lorasf);
+    if (nvs_get_i8(my_handle, "loradr", &flash8) != ESP_OK ||
+        flash8 != cfg.loradr)
+      nvs_set_i8(my_handle, "loradr", cfg.loradr);
 
     if (nvs_get_i8(my_handle, "txpower", &flash8) != ESP_OK ||
         flash8 != cfg.txpower)
@@ -221,11 +222,11 @@ void loadConfig() {
       ESP_LOGI(TAG, "bsecstate = %d", cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE]);
     };
 
-    if (nvs_get_i8(my_handle, "lorasf", &flash8) == ESP_OK) {
-      cfg.lorasf = flash8;
-      ESP_LOGI(TAG, "lorasf = %d", flash8);
+    if (nvs_get_i8(my_handle, "loradr", &flash8) == ESP_OK) {
+      cfg.loradr = flash8;
+      ESP_LOGI(TAG, "loradr = %d", flash8);
     } else {
-      ESP_LOGI(TAG, "lorasf set to default %d", cfg.lorasf);
+      ESP_LOGI(TAG, "loradr set to default %d", cfg.loradr);
       saveConfig();
     }
 

src/display.cpp

@@ -205,7 +205,7 @@ void draw_page(time_t t, uint8_t page) {
     u8x8.setCursor(11, 3);
     if (cfg.adrmode) // if ADR=on then display SF value inverse
       u8x8.setInverseFont(1);
-    u8x8.printf("%5s", getSfName(LMIC.rps));
+    u8x8.printf("%5s", getSfName(updr2rps(LMIC.datarate)));
     if (cfg.adrmode) // switch off inverse if it was turned on
       u8x8.setInverseFont(0);
 #endif // HAS_LORA

src/lorawan.cpp

@@ -234,11 +234,15 @@ void onEvent(ev_t ev) {
     sprintf(display_line6, " "); // clear previous lmic status
     // set data rate adaptation according to saved setting
     LMIC_setAdrMode(cfg.adrmode);
-    // set data rate and transmit power if we have no ADR
+    // set data rate and transmit power to defaults only if we have no ADR
     if (!cfg.adrmode)
-      switch_lora(cfg.lorasf, cfg.txpower);
+      LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
     // show current devaddr
     ESP_LOGI(TAG, "DEVaddr=%08X", LMIC.devaddr);
+    ESP_LOGI(TAG, "Radio parameters %s / %s / %s",
+             getSfName(updr2rps(LMIC.datarate)),
+             getBwName(updr2rps(LMIC.datarate)),
+             getCrName(updr2rps(LMIC.datarate)));
     break;
 
   case EV_RFU1:
@@ -321,53 +325,6 @@ void onEvent(ev_t ev) {
   }
 }
 
-// helper function to assign LoRa datarates to numeric spreadfactor values
-void switch_lora(uint8_t sf, uint8_t tx) {
-  if (tx > 20)
-    return;
-  cfg.txpower = tx;
-  switch (sf) {
-  case 7:
-    LMIC_setDrTxpow(DR_SF7, tx);
-    cfg.lorasf = sf;
-    break;
-  case 8:
-    LMIC_setDrTxpow(DR_SF8, tx);
-    cfg.lorasf = sf;
-    break;
-  case 9:
-    LMIC_setDrTxpow(DR_SF9, tx);
-    cfg.lorasf = sf;
-    break;
-  case 10:
-    LMIC_setDrTxpow(DR_SF10, tx);
-    cfg.lorasf = sf;
-    break;
-  case 11:
-#if defined(CFG_us915)
-    LMIC_setDrTxpow(DR_SF11CR, tx);
-    cfg.lorasf = sf;
-    break;
-#else
-    LMIC_setDrTxpow(DR_SF11, tx);
-    cfg.lorasf = sf;
-    break;
-#endif
-  case 12:
-#if defined(CFG_us915)
-    LMIC_setDrTxpow(DR_SF12CR, tx);
-    cfg.lorasf = sf;
-    break;
-#else
-    LMIC_setDrTxpow(DR_SF12, tx);
-    cfg.lorasf = sf;
-    break;
-#endif
-  default:
-    break;
-  }
-}
-
 // LMIC send task
 void lora_send(void *pvParameters) {
   configASSERT(((uint32_t)pvParameters) == 1); // FreeRTOS check
@@ -698,4 +655,14 @@ const char *getSfName(rps_t rps) {
   return t[getSf(rps)];
 }
 
+const char *getBwName(rps_t rps) {
+  const char *const t[] = {"BW125", "BW250", "BW500", "BWrfu"};
+  return t[getBw(rps)];
+}
+
+const char *getCrName(rps_t rps) {
+  const char *const t[] = {"CR 4/5", "CR 4/6", "CR 4/7", "CR 4/8"};
+  return t[getCr(rps)];
+}
+
 #endif // HAS_LORA

src/paxcounter.conf

@@ -1,3 +1,5 @@
+// clang-format off
+
 // ----- Paxcounter user config file ------
 //
 // --> adapt to your needs and use case <--
@@ -46,7 +48,8 @@
 #define MEM_LOW                         2048    // [Bytes] low memory threshold triggering a send cycle
 #define RETRANSMIT_RCMD                 5       // [seconds] wait time before retransmitting rcommand results
 #define PAYLOAD_BUFFER_SIZE             51      // maximum size of payload block per transmit
-#define LORASFDEFAULT                   9       // 7 ... 12 SF, according to LoRaWAN specs
+#define LORADRDEFAULT                   5       // 0 .. 15, LoRaWAN datarate, according to regional LoRaWAN specs [default = 5]
+#define LORATXPOWDEFAULT                14      // 0 .. 15, LoRaWAN TX power
 #define MAXLORARETRY                    500     // maximum count of TX retries if LoRa busy
 #define SEND_QUEUE_SIZE                 10      // maximum number of messages in payload send queue [1 = no queue]
 

src/payload.cpp

@@ -36,7 +36,7 @@ void PayloadConvert::addVoltage(uint16_t value) {
 }
 
 void PayloadConvert::addConfig(configData_t value) {
-  buffer[cursor++] = value.lorasf;
+  buffer[cursor++] = value.loradr;
   buffer[cursor++] = value.txpower;
   buffer[cursor++] = value.adrmode;
   buffer[cursor++] = value.screensaver;
@@ -157,7 +157,7 @@ void PayloadConvert::addAlarm(int8_t rssi, uint8_t msg) {
 void PayloadConvert::addVoltage(uint16_t value) { writeUint16(value); }
 
 void PayloadConvert::addConfig(configData_t value) {
-  writeUint8(value.lorasf);
+  writeUint8(value.loradr);
   writeUint8(value.txpower);
   writeUint16(value.rssilimit);
   writeUint8(value.sendcycle);

src/rcommand.cpp

@@ -193,10 +193,22 @@ void set_monitor(uint8_t val[]) {
   cfg.monitormode = val[0] ? 1 : 0;
 }
 
-void set_lorasf(uint8_t val[]) {
+void set_loradr(uint8_t val[]) {
 #if (HAS_LORA)
-  ESP_LOGI(TAG, "Remote command: set LoRa SF to %d", val[0]);
-  switch_lora(val[0], cfg.txpower);
+  if (validDR(val[0])) {
+    cfg.loradr = val[0];
+    ESP_LOGI(TAG, "Remote command: set LoRa Datarate to %d", cfg.loradr);
+    LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
+    ESP_LOGI(TAG, "Radio parameters now %s / %s / %s",
+             getSfName(updr2rps(LMIC.datarate)),
+             getBwName(updr2rps(LMIC.datarate)),
+             getCrName(updr2rps(LMIC.datarate)));
+
+  } else
+    ESP_LOGI(
+        TAG,
+        "Remote command: set LoRa Datarate called with illegal datarate %d",
+        val[0]);
 #else
   ESP_LOGW(TAG, "Remote command: LoRa not implemented");
 #endif // HAS_LORA
@@ -247,8 +259,16 @@ void set_rgblum(uint8_t val[]) {
 
 void set_lorapower(uint8_t val[]) {
 #if (HAS_LORA)
-  ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %d", val[0]);
-  switch_lora(cfg.lorasf, val[0]);
+  // set data rate and transmit power only if we have no ADR
+  if (!cfg.adrmode) {
+    cfg.txpower = val[0] & 0x0f;
+    ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %d", cfg.txpower);
+    LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
+  } else
+    ESP_LOGI(
+        TAG,
+        "Remote command: set LoRa TXPOWER, not executed because ADR is on");
+
 #else
   ESP_LOGW(TAG, "Remote command: LoRa not implemented");
 #endif // HAS_LORA
@@ -331,7 +351,7 @@ void set_flush(uint8_t val[]) {
 static cmd_t table[] = {
     {0x01, set_rssi, 1, true},          {0x02, set_countmode, 1, true},
     {0x03, set_gps, 1, true},           {0x04, set_display, 1, true},
-    {0x05, set_lorasf, 1, true},        {0x06, set_lorapower, 1, true},
+    {0x05, set_loradr, 1, true},        {0x06, set_lorapower, 1, true},
     {0x07, set_loraadr, 1, true},       {0x08, set_screensaver, 1, true},
     {0x09, set_reset, 1, true},         {0x0a, set_sendcycle, 1, true},
     {0x0b, set_wifichancycle, 1, true}, {0x0c, set_blescantime, 1, true},