Merge pull request #544 from cyberman54/master

sync sds011 with master

README.md

@@ -33,12 +33,15 @@ This can all be done with a single small and cheap ESP32 board for less than $20
 *LoRa & SPI*:
 
 - Heltec: LoRa-32 v1 and v2
-- TTGO: T1*, T2*, T3*, T-Beam, T-Fox (* supports microSD-card)
+- TTGO: T1*, T2*, T3*, T-Beam, T-Fox
 - Pycom: LoPy, LoPy4, FiPy
 - Radioshuttle.de: [ECO Power Board](https://www.radioshuttle.de/esp32-eco-power/esp32-eco-power-board/)
 - WeMos: LoLin32 + [LoraNode32 shield](https://github.com/hallard/LoLin32-Lora),
 LoLin32lite + [LoraNode32-Lite shield](https://github.com/hallard/LoLin32-Lite-Lora)
 - Adafruit ESP32 Feather + LoRa Wing + OLED Wing, #IoT Octopus32 (Octopus + ESP32 Feather)
+- M5Stack: [Basic Core*](https://m5stack.com/collections/m5-core/products/basic-core-iot-development-kit) + [Lora Module RA-01H](https://m5stack.com/collections/m5-module/products/lora-module-868mhz)
+
+*) supports microSD-card
 
 *SPI only*:
 

include/bmesensor.h

@@ -5,7 +5,7 @@
 #include <Wire.h>
 
 #ifdef HAS_BME680
-#include "../lib/Bosch-BSEC/src/bsec.h"
+#include <bsec.h>
 #elif defined HAS_BME280
 #include <Adafruit_Sensor.h>
 #include <Adafruit_BME280.h>

include/display.h

@@ -9,7 +9,7 @@ extern uint8_t DisplayIsOn, displaybuf[];
 void refreshTheDisplay(bool nextPage = false);
 void init_display(bool verbose = false);
 void shutdown_display(void);
-void draw_page(time_t t, uint8_t page);
+void draw_page(time_t t, bool nextpage);
 void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv,
                const char *format, ...);
 void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message);

include/globals.h

@@ -15,7 +15,7 @@
 #include <array>
 #include <algorithm>
 #include "mallocator.h"
-#include "../lib/Bosch-BSEC/src/inc/bsec_datatypes.h"
+#include <bsec.h>
 
 // sniffing types
 #define MAC_SNIFF_WIFI 0

include/senddata.h

@@ -16,10 +16,6 @@
 #include "sdcard.h"
 #endif
 
-#if (HAS_SDS011)
-#include "sds011read.h"
-#endif
-
 extern Ticker sendcycler;
 
 void SendPayload(uint8_t port, sendprio_t prio);

include/spislave.h

@@ -28,6 +28,8 @@ licenses. Refer to LICENSE.txt file in repository for more details.
 
 esp_err_t spi_init();
 
+extern TaskHandle_t spiTask;
+
 void spi_enqueuedata(MessageBuffer_t *message);
 void spi_queuereset();
 

lib/Bosch-BSEC/LICENSE

@@ -1,39 +0,0 @@
-Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-
-Redistributions in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-
-Neither the name of the copyright holder nor the names of the
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
-OR CONTRIBUTORS BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
-OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
-PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
-
-The information provided is believed to be accurate and reliable.
-The copyright holder assumes no responsibility
-for the consequences of use
-of such information nor for any infringement of patents or
-other rights of third parties which may result from its use.
-No license is granted by implication or otherwise under any patent or
-patent rights of the copyright holder.

lib/Bosch-BSEC/config/generic_18v_300s_28d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,133,135,0,0

lib/Bosch-BSEC/config/generic_18v_300s_28d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,133,135,0,0};
-

lib/Bosch-BSEC/config/generic_18v_300s_28d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_18v_300s_4d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,166,224,0,0

lib/Bosch-BSEC/config/generic_18v_300s_4d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,166,224,0,0};
-

lib/Bosch-BSEC/config/generic_18v_300s_4d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_18v_3s_28d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,23,142,0,0

lib/Bosch-BSEC/config/generic_18v_3s_28d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,23,142,0,0};
-

lib/Bosch-BSEC/config/generic_18v_3s_28d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_18v_3s_4d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,52,233,0,0

lib/Bosch-BSEC/config/generic_18v_3s_4d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,52,233,0,0};
-

lib/Bosch-BSEC/config/generic_18v_3s_4d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_33v_300s_28d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,59,62,0,0

lib/Bosch-BSEC/config/generic_33v_300s_28d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,59,62,0,0};
-

lib/Bosch-BSEC/config/generic_33v_300s_28d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_33v_300s_4d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,24,89,0,0

lib/Bosch-BSEC/config/generic_33v_300s_4d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,48,117,0,0,0,0,24,89,0,0};
-

lib/Bosch-BSEC/config/generic_33v_300s_4d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_33v_3s_28d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,169,55,0,0

lib/Bosch-BSEC/config/generic_33v_3s_28d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,168,19,73,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,169,55,0,0};
-

lib/Bosch-BSEC/config/generic_33v_3s_28d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/config/generic_33v_3s_4d/bsec_iaq.csv

@@ -1 +0,0 @@
-454,4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,138,80,0,0

lib/Bosch-BSEC/config/generic_33v_3s_4d/bsec_serialized_configurations_iaq.c

@@ -1,5 +0,0 @@
-#include "bsec_serialized_configurations_iaq.h"
-
-const uint8_t bsec_config_iaq[454] = 
-     {4,7,4,1,61,0,0,0,0,0,0,0,174,1,0,0,48,0,1,0,0,192,168,71,64,49,119,76,0,0,225,68,137,65,0,63,205,204,204,62,0,0,64,63,205,204,204,62,0,0,0,0,216,85,0,100,0,0,0,0,0,0,0,0,28,0,2,0,0,244,1,225,0,25,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,9,0,5,0,0,0,0,0,1,88,0,9,0,229,208,34,62,0,0,0,0,0,0,0,0,218,27,156,62,225,11,67,64,0,0,160,64,0,0,0,0,0,0,0,0,94,75,72,189,93,254,159,64,66,62,160,191,0,0,0,0,0,0,0,0,33,31,180,190,138,176,97,64,65,241,99,190,0,0,0,0,0,0,0,0,167,121,71,61,165,189,41,192,184,30,189,64,12,0,10,0,0,0,0,0,0,0,0,0,229,0,254,0,2,1,5,48,117,100,0,44,1,112,23,151,7,132,3,197,0,92,4,144,1,64,1,64,1,144,1,48,117,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,48,117,48,117,100,0,100,0,100,0,100,0,48,117,48,117,48,117,100,0,100,0,100,0,48,117,48,117,100,0,100,0,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,44,1,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,8,7,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,112,23,255,255,255,255,255,255,255,255,220,5,220,5,220,5,255,255,255,255,255,255,220,5,220,5,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,44,1,0,0,0,0,138,80,0,0};
-

lib/Bosch-BSEC/config/generic_33v_3s_4d/bsec_serialized_configurations_iaq.h

@@ -1,4 +0,0 @@
-#include <stdint.h>
-
-extern const uint8_t bsec_config_iaq[454];
-

lib/Bosch-BSEC/src/bme680/README.md

@@ -1,282 +0,0 @@
-# BME680 sensor API
-
-## Introduction
-
-This package contains the Bosch Sensortec's BME680 gas sensor API
-
-The sensor driver package includes bme680.h, bme680.c and bme680_defs.h files
-
-## Version
-
-File          | Version | Date
---------------|---------|-------------
-bme680.c      |  3.5.9  | 19 Jun 2018
-bme680.h      |  3.5.9  | 19 Jun 2018
-bme680_defs.h |  3.5.9  | 19 Jun 2018  
-
-## Integration details
-
-* Integrate bme680.h, bme680_defs.h and bme680.c file in to your project.
-* Include the bme680.h file in your code like below.
-
-``` c
-#include "bme680.h"
-```
-
-## File information
-
-* bme680_defs.h : This header file has the constants, macros and datatype declarations.
-* bme680.h : This header file contains the declarations of the sensor driver APIs.
-* bme680.c : This source file contains the definitions of the sensor driver APIs.
-
-## Supported sensor interfaces
-
-* SPI 4-wire
-* I2C
-
-## Usage guide
-
-### Initializing the sensor
-
-To initialize the sensor, you will first need to create a device structure. You 
-can do this by creating an instance of the structure bme680_dev. Then go on to 
-fill in the various parameters as shown below
-
-#### Example for SPI 4-Wire
-
-``` c
-    struct bme680_dev gas_sensor;
-
-    /* You may assign a chip select identifier to be handled later */
-    gas_sensor.dev_id = 0;
-    gas_sensor.intf = BME680_SPI_INTF;
-    gas_sensor.read = user_spi_read;
-    gas_sensor.write = user_spi_write;
-    gas_sensor.delay_ms = user_delay_ms;
-    /* amb_temp can be set to 25 prior to configuring the gas sensor 
-     * or by performing a few temperature readings without operating the gas sensor.
-     */
-    gas_sensor.amb_temp = 25;
-
-    int8_t rslt = BME680_OK;
-    rslt = bme680_init(&gas_sensor);
-```
-
-#### Example for I2C
-
-``` c
-    struct bme680_dev gas_sensor;
-
-    gas_sensor.dev_id = BME680_I2C_ADDR_PRIMARY;
-    gas_sensor.intf = BME680_I2C_INTF;
-    gas_sensor.read = i2c_read;
-    gas_sensor.write = i2c_write;
-    gas_sensor.delay_ms = user_delay_ms;
-    /* amb_temp can be set to 25 prior to configuring the gas sensor 
-     * or by performing a few temperature readings without operating the gas sensor.
-     */
-    gas_sensor.amb_temp = 25;
-
-
-    int8_t rslt = BME680_OK;
-    rslt = bme680_init(&gas_sensor);
-```
-
-Regarding compensation functions for temperature, pressure, humidity and gas we have two implementations.
-
-    - Integer version
-    - floating point version
-
-By default, Integer version is used in the API
-
-If the user needs the floating point version, the user has to un-comment BME680_FLOAT_POINT_COMPENSATION macro 
-in bme680_defs.h file or to add it in the compiler flags.
-
-### Configuring the sensor
-
-#### Example for configuring the sensor in forced mode
-
-``` c
-    uint8_t set_required_settings;
-
-    /* Set the temperature, pressure and humidity settings */
-    gas_sensor.tph_sett.os_hum = BME680_OS_2X;
-    gas_sensor.tph_sett.os_pres = BME680_OS_4X;
-    gas_sensor.tph_sett.os_temp = BME680_OS_8X;
-    gas_sensor.tph_sett.filter = BME680_FILTER_SIZE_3;
-
-    /* Set the remaining gas sensor settings and link the heating profile */
-    gas_sensor.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS;
-    /* Create a ramp heat waveform in 3 steps */
-    gas_sensor.gas_sett.heatr_temp = 320; /* degree Celsius */
-    gas_sensor.gas_sett.heatr_dur = 150; /* milliseconds */
-
-    /* Select the power mode */
-    /* Must be set before writing the sensor configuration */
-    gas_sensor.power_mode = BME680_FORCED_MODE; 
-
-    /* Set the required sensor settings needed */
-    set_required_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL | BME680_FILTER_SEL 
-        | BME680_GAS_SENSOR_SEL;
-
-    /* Set the desired sensor configuration */
-    rslt = bme680_set_sensor_settings(set_required_settings,&gas_sensor);
-
-    /* Set the power mode */
-    rslt = bme680_set_sensor_mode(&gas_sensor);
-
-    
-```
-
-### Reading sensor data
-
-#### Example for reading all sensor data
-
-``` c
-    /* Get the total measurement duration so as to sleep or wait till the
-     * measurement is complete */
-    uint16_t meas_period;
-    bme680_get_profile_dur(&meas_period, &gas_sensor);
-
-    struct bme680_field_data data;
-
-    while(1)
-    {
-        user_delay_ms(meas_period); /* Delay till the measurement is ready */
-
-        rslt = bme680_get_sensor_data(&data, &gas_sensor);
-
-        printf("T: %.2f degC, P: %.2f hPa, H %.2f %%rH ", data.temperature / 100.0f,
-            data.pressure / 100.0f, data.humidity / 1000.0f );
-        /* Avoid using measurements from an unstable heating setup */
-        if(data.status & BME680_GASM_VALID_MSK)
-            printf(", G: %d ohms", data.gas_resistance);
-
-        printf("\r\n");
-
-        /* Trigger the next measurement if you would like to read data out continuously */
-        if (gas_sensor.power_mode == BME680_FORCED_MODE) {
-            rslt = bme680_set_sensor_mode(&gas_sensor);
-        }
-    }
-```
-
-### Templates for function pointers
-
-``` c
-
-void user_delay_ms(uint32_t period)
-{
-    /*
-     * Return control or wait,
-     * for a period amount of milliseconds
-     */
-}
-
-int8_t user_spi_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
-{
-    int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
-
-    /*
-     * The parameter dev_id can be used as a variable to select which Chip Select pin has
-     * to be set low to activate the relevant device on the SPI bus
-     */
-
-    /*
-     * Data on the bus should be like
-     * |----------------+---------------------+-------------|
-     * | MOSI           | MISO                | Chip Select |
-     * |----------------+---------------------|-------------|
-     * | (don't care)   | (don't care)        | HIGH        |
-     * | (reg_addr)     | (don't care)        | LOW         |
-     * | (don't care)   | (reg_data[0])       | LOW         |
-     * | (....)         | (....)              | LOW         |
-     * | (don't care)   | (reg_data[len - 1]) | LOW         |
-     * | (don't care)   | (don't care)        | HIGH        |
-     * |----------------+---------------------|-------------|
-     */
-
-    return rslt;
-}
-
-int8_t user_spi_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
-{
-    int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
-
-    /*
-     * The parameter dev_id can be used as a variable to select which Chip Select pin has
-     * to be set low to activate the relevant device on the SPI bus
-     */
-
-    /*
-     * Data on the bus should be like
-     * |---------------------+--------------+-------------|
-     * | MOSI                | MISO         | Chip Select |
-     * |---------------------+--------------|-------------|
-     * | (don't care)        | (don't care) | HIGH        |
-     * | (reg_addr)          | (don't care) | LOW         |
-     * | (reg_data[0])       | (don't care) | LOW         |
-     * | (....)              | (....)       | LOW         |
-     * | (reg_data[len - 1]) | (don't care) | LOW         |
-     * | (don't care)        | (don't care) | HIGH        |
-     * |---------------------+--------------|-------------|
-     */
-
-    return rslt;
-}
-
-int8_t i2c_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
-{
-    int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
-
-    /*
-     * The parameter dev_id can be used as a variable to store the I2C address of the device
-     */
-
-    /*
-     * Data on the bus should be like
-     * |------------+---------------------|
-     * | I2C action | Data                |
-     * |------------+---------------------|
-     * | Start      | -                   |
-     * | Write      | (reg_addr)          |
-     * | Stop       | -                   |
-     * | Start      | -                   |
-     * | Read       | (reg_data[0])       |
-     * | Read       | (....)              |
-     * | Read       | (reg_data[len - 1]) |
-     * | Stop       | -                   |
-     * |------------+---------------------|
-     */
-
-    return rslt;
-}
-
-int8_t i2c_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
-{
-    int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
-
-    /*
-     * The parameter dev_id can be used as a variable to store the I2C address of the device
-     */
-
-    /*
-     * Data on the bus should be like
-     * |------------+---------------------|
-     * | I2C action | Data                |
-     * |------------+---------------------|
-     * | Start      | -                   |
-     * | Write      | (reg_addr)          |
-     * | Write      | (reg_data[0])       |
-     * | Write      | (....)              |
-     * | Write      | (reg_data[len - 1]) |
-     * | Stop       | -                   |
-     * |------------+---------------------|
-     */
-
-    return rslt;
-}
-
-```
-
-## Copyright (C) 2017 - 2018 Bosch Sensortec GmbH

lib/Bosch-BSEC/src/bme680/bme680.h

@@ -1,225 +0,0 @@
-/**
- * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * Neither the name of the copyright holder nor the names of the
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
- * OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
- * OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- * The information provided is believed to be accurate and reliable.
- * The copyright holder assumes no responsibility
- * for the consequences of use
- * of such information nor for any infringement of patents or
- * other rights of third parties which may result from its use.
- * No license is granted by implication or otherwise under any patent or
- * patent rights of the copyright holder.
- *
- * @file	bme680.h
- * @date	19 Jun 2018
- * @version	3.5.9
- * @brief
- *
- */
-/*! @file bme680.h
- @brief Sensor driver for BME680 sensor */
-/*!
- * @defgroup BME680 SENSOR API
- * @{*/
-#ifndef BME680_H_
-#define BME680_H_
-
-/*! CPP guard */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-/* Header includes */
-#include "bme680_defs.h"
-
-/* function prototype declarations */
-/*!
- *  @brief This API is the entry point.
- *  It reads the chip-id and calibration data from the sensor.
- *
- *  @param[in,out] dev : Structure instance of bme680_dev
- *
- *  @return Result of API execution status
- *  @retval zero -> Success / +ve value -> Warning / -ve value -> Error
- */
-int8_t bme680_init(struct bme680_dev *dev);
-
-/*!
- * @brief This API writes the given data to the register address
- * of the sensor.
- *
- * @param[in] reg_addr : Register address from where the data to be written.
- * @param[in] reg_data : Pointer to data buffer which is to be written
- * in the sensor.
- * @param[in] len : No of bytes of data to write..
- * @param[in] dev : Structure instance of bme680_dev.
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
- */
-int8_t bme680_set_regs(const uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, struct bme680_dev *dev);
-
-/*!
- * @brief This API reads the data from the given register address of the sensor.
- *
- * @param[in] reg_addr : Register address from where the data to be read
- * @param[out] reg_data : Pointer to data buffer to store the read data.
- * @param[in] len : No of bytes of data to be read.
- * @param[in] dev : Structure instance of bme680_dev.
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
- */
-int8_t bme680_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, struct bme680_dev *dev);
-
-/*!
- * @brief This API performs the soft reset of the sensor.
- *
- * @param[in] dev : Structure instance of bme680_dev.
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
- */
-int8_t bme680_soft_reset(struct bme680_dev *dev);
-
-/*!
- * @brief This API is used to set the power mode of the sensor.
- *
- * @param[in] dev : Structure instance of bme680_dev
- * @note : Pass the value to bme680_dev.power_mode structure variable.
- *
- *  value	|	mode
- * -------------|------------------
- *	0x00	|	BME680_SLEEP_MODE
- *	0x01	|	BME680_FORCED_MODE
- *
- * * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
- */
-int8_t bme680_set_sensor_mode(struct bme680_dev *dev);
-
-/*!
- * @brief This API is used to get the power mode of the sensor.
- *
- * @param[in] dev : Structure instance of bme680_dev
- * @note : bme680_dev.power_mode structure variable hold the power mode.
- *
- *  value	|	mode
- * ---------|------------------
- *	0x00	|	BME680_SLEEP_MODE
- *	0x01	|	BME680_FORCED_MODE
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
- */
-int8_t bme680_get_sensor_mode(struct bme680_dev *dev);
-
-/*!
- * @brief This API is used to set the profile duration of the sensor.
- *
- * @param[in] dev	   : Structure instance of bme680_dev.
- * @param[in] duration : Duration of the measurement in ms.
- *
- * @return Nothing
- */
-void bme680_set_profile_dur(uint16_t duration, struct bme680_dev *dev);
-
-/*!
- * @brief This API is used to get the profile duration of the sensor.
- *
- * @param[in] dev	   : Structure instance of bme680_dev.
- * @param[in] duration : Duration of the measurement in ms.
- *
- * @return Nothing
- */
-void bme680_get_profile_dur(uint16_t *duration, const struct bme680_dev *dev);
-
-/*!
- * @brief This API reads the pressure, temperature and humidity and gas data
- * from the sensor, compensates the data and store it in the bme680_data
- * structure instance passed by the user.
- *
- * @param[out] data: Structure instance to hold the data.
- * @param[in] dev : Structure instance of bme680_dev.
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error
- */
-int8_t bme680_get_sensor_data(struct bme680_field_data *data, struct bme680_dev *dev);
-
-/*!
- * @brief This API is used to set the oversampling, filter and T,P,H, gas selection
- * settings in the sensor.
- *
- * @param[in] dev : Structure instance of bme680_dev.
- * @param[in] desired_settings : Variable used to select the settings which
- * are to be set in the sensor.
- *
- *	 Macros	                   |  Functionality
- *---------------------------------|----------------------------------------------
- *	BME680_OST_SEL             |    To set temperature oversampling.
- *	BME680_OSP_SEL             |    To set pressure oversampling.
- *	BME680_OSH_SEL             |    To set humidity oversampling.
- *	BME680_GAS_MEAS_SEL        |    To set gas measurement setting.
- *	BME680_FILTER_SEL          |    To set filter setting.
- *	BME680_HCNTRL_SEL          |    To set humidity control setting.
- *	BME680_RUN_GAS_SEL         |    To set run gas setting.
- *	BME680_NBCONV_SEL          |    To set NB conversion setting.
- *	BME680_GAS_SENSOR_SEL      |    To set all gas sensor related settings
- *
- * @note : Below are the macros to be used by the user for selecting the
- * desired settings. User can do OR operation of these macros for configuring
- * multiple settings.
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
- */
-int8_t bme680_set_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
-
-/*!
- * @brief This API is used to get the oversampling, filter and T,P,H, gas selection
- * settings in the sensor.
- *
- * @param[in] dev : Structure instance of bme680_dev.
- * @param[in] desired_settings : Variable used to select the settings which
- * are to be get from the sensor.
- *
- * @return Result of API execution status
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
- */
-int8_t bme680_get_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
-#ifdef __cplusplus
-}
-#endif /* End of CPP guard */
-#endif /* BME680_H_ */
-/** @}*/

lib/Bosch-BSEC/src/bme680/bme680_defs.h

@@ -1,545 +0,0 @@
-/**
- * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * Neither the name of the copyright holder nor the names of the
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
- * OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
- * OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- * The information provided is believed to be accurate and reliable.
- * The copyright holder assumes no responsibility
- * for the consequences of use
- * of such information nor for any infringement of patents or
- * other rights of third parties which may result from its use.
- * No license is granted by implication or otherwise under any patent or
- * patent rights of the copyright holder.
- *
- * @file	bme680_defs.h
- * @date	19 Jun 2018
- * @version	3.5.9
- * @brief
- *
- */
-
-/*! @file bme680_defs.h
- @brief Sensor driver for BME680 sensor */
-/*!
- * @defgroup BME680 SENSOR API
- * @brief
- * @{*/
-#ifndef BME680_DEFS_H_
-#define BME680_DEFS_H_
-
-/********************************************************/
-/* header includes */
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <linux/kernel.h>
-#else
-#include <stdint.h>
-#include <stddef.h>
-#endif
-
-/******************************************************************************/
-/*! @name		Common macros					      */
-/******************************************************************************/
-
-#if !defined(UINT8_C) && !defined(INT8_C)
-#define INT8_C(x)       S8_C(x)
-#define UINT8_C(x)      U8_C(x)
-#endif
-
-#if !defined(UINT16_C) && !defined(INT16_C)
-#define INT16_C(x)      S16_C(x)
-#define UINT16_C(x)     U16_C(x)
-#endif
-
-#if !defined(INT32_C) && !defined(UINT32_C)
-#define INT32_C(x)      S32_C(x)
-#define UINT32_C(x)     U32_C(x)
-#endif
-
-#if !defined(INT64_C) && !defined(UINT64_C)
-#define INT64_C(x)      S64_C(x)
-#define UINT64_C(x)     U64_C(x)
-#endif
-
-/**@}*/
-
-/**\name C standard macros */
-#ifndef NULL
-#ifdef __cplusplus
-#define NULL   0
-#else
-#define NULL   ((void *) 0)
-#endif
-#endif
-
-/** BME680 configuration macros */
-/** Enable or un-comment the macro to provide floating point data output */
-#ifndef BME680_FLOAT_POINT_COMPENSATION
-//#define BME680_FLOAT_POINT_COMPENSATION
-#endif
-
-/** BME680 General config */
-#define BME680_POLL_PERIOD_MS		UINT8_C(10)
-
-/** BME680 I2C addresses */
-#define BME680_I2C_ADDR_PRIMARY		UINT8_C(0x76)
-#define BME680_I2C_ADDR_SECONDARY	UINT8_C(0x77)
-
-/** BME680 unique chip identifier */
-#define BME680_CHIP_ID  UINT8_C(0x61)
-
-/** BME680 coefficients related defines */
-#define BME680_COEFF_SIZE		UINT8_C(41)
-#define BME680_COEFF_ADDR1_LEN		UINT8_C(25)
-#define BME680_COEFF_ADDR2_LEN		UINT8_C(16)
-
-/** BME680 field_x related defines */
-#define BME680_FIELD_LENGTH		UINT8_C(15)
-#define BME680_FIELD_ADDR_OFFSET	UINT8_C(17)
-
-/** Soft reset command */
-#define BME680_SOFT_RESET_CMD   UINT8_C(0xb6)
-
-/** Error code definitions */
-#define BME680_OK		INT8_C(0)
-/* Errors */
-#define BME680_E_NULL_PTR		    INT8_C(-1)
-#define BME680_E_COM_FAIL		    INT8_C(-2)
-#define BME680_E_DEV_NOT_FOUND		INT8_C(-3)
-#define BME680_E_INVALID_LENGTH		INT8_C(-4)
-
-/* Warnings */
-#define BME680_W_DEFINE_PWR_MODE	INT8_C(1)
-#define BME680_W_NO_NEW_DATA        INT8_C(2)
-
-/* Info's */
-#define BME680_I_MIN_CORRECTION		UINT8_C(1)
-#define BME680_I_MAX_CORRECTION		UINT8_C(2)
-
-/** Register map */
-/** Other coefficient's address */
-#define BME680_ADDR_RES_HEAT_VAL_ADDR	UINT8_C(0x00)
-#define BME680_ADDR_RES_HEAT_RANGE_ADDR	UINT8_C(0x02)
-#define BME680_ADDR_RANGE_SW_ERR_ADDR	UINT8_C(0x04)
-#define BME680_ADDR_SENS_CONF_START	UINT8_C(0x5A)
-#define BME680_ADDR_GAS_CONF_START	UINT8_C(0x64)
-
-/** Field settings */
-#define BME680_FIELD0_ADDR		UINT8_C(0x1d)
-
-/** Heater settings */
-#define BME680_RES_HEAT0_ADDR		UINT8_C(0x5a)
-#define BME680_GAS_WAIT0_ADDR		UINT8_C(0x64)
-
-/** Sensor configuration registers */
-#define BME680_CONF_HEAT_CTRL_ADDR		UINT8_C(0x70)
-#define BME680_CONF_ODR_RUN_GAS_NBC_ADDR	UINT8_C(0x71)
-#define BME680_CONF_OS_H_ADDR			UINT8_C(0x72)
-#define BME680_MEM_PAGE_ADDR			UINT8_C(0xf3)
-#define BME680_CONF_T_P_MODE_ADDR		UINT8_C(0x74)
-#define BME680_CONF_ODR_FILT_ADDR		UINT8_C(0x75)
-
-/** Coefficient's address */
-#define BME680_COEFF_ADDR1	UINT8_C(0x89)
-#define BME680_COEFF_ADDR2	UINT8_C(0xe1)
-
-/** Chip identifier */
-#define BME680_CHIP_ID_ADDR	UINT8_C(0xd0)
-
-/** Soft reset register */
-#define BME680_SOFT_RESET_ADDR		UINT8_C(0xe0)
-
-/** Heater control settings */
-#define BME680_ENABLE_HEATER		UINT8_C(0x00)
-#define BME680_DISABLE_HEATER		UINT8_C(0x08)
-
-/** Gas measurement settings */
-#define BME680_DISABLE_GAS_MEAS		UINT8_C(0x00)
-#define BME680_ENABLE_GAS_MEAS		UINT8_C(0x01)
-
-/** Over-sampling settings */
-#define BME680_OS_NONE		UINT8_C(0)
-#define BME680_OS_1X		UINT8_C(1)
-#define BME680_OS_2X		UINT8_C(2)
-#define BME680_OS_4X		UINT8_C(3)
-#define BME680_OS_8X		UINT8_C(4)
-#define BME680_OS_16X		UINT8_C(5)
-
-/** IIR filter settings */
-#define BME680_FILTER_SIZE_0	UINT8_C(0)
-#define BME680_FILTER_SIZE_1	UINT8_C(1)
-#define BME680_FILTER_SIZE_3	UINT8_C(2)
-#define BME680_FILTER_SIZE_7	UINT8_C(3)
-#define BME680_FILTER_SIZE_15	UINT8_C(4)
-#define BME680_FILTER_SIZE_31	UINT8_C(5)
-#define BME680_FILTER_SIZE_63	UINT8_C(6)
-#define BME680_FILTER_SIZE_127	UINT8_C(7)
-
-/** Power mode settings */
-#define BME680_SLEEP_MODE	UINT8_C(0)
-#define BME680_FORCED_MODE	UINT8_C(1)
-
-/** Delay related macro declaration */
-#define BME680_RESET_PERIOD	UINT32_C(10)
-
-/** SPI memory page settings */
-#define BME680_MEM_PAGE0	UINT8_C(0x10)
-#define BME680_MEM_PAGE1	UINT8_C(0x00)
-
-/** Ambient humidity shift value for compensation */
-#define BME680_HUM_REG_SHIFT_VAL	UINT8_C(4)
-
-/** Run gas enable and disable settings */
-#define BME680_RUN_GAS_DISABLE	UINT8_C(0)
-#define BME680_RUN_GAS_ENABLE	UINT8_C(1)
-
-/** Buffer length macro declaration */
-#define BME680_TMP_BUFFER_LENGTH	UINT8_C(40)
-#define BME680_REG_BUFFER_LENGTH	UINT8_C(6)
-#define BME680_FIELD_DATA_LENGTH	UINT8_C(3)
-#define BME680_GAS_REG_BUF_LENGTH	UINT8_C(20)
-
-/** Settings selector */
-#define BME680_OST_SEL			UINT16_C(1)
-#define BME680_OSP_SEL			UINT16_C(2)
-#define BME680_OSH_SEL			UINT16_C(4)
-#define BME680_GAS_MEAS_SEL		UINT16_C(8)
-#define BME680_FILTER_SEL		UINT16_C(16)
-#define BME680_HCNTRL_SEL		UINT16_C(32)
-#define BME680_RUN_GAS_SEL		UINT16_C(64)
-#define BME680_NBCONV_SEL		UINT16_C(128)
-#define BME680_GAS_SENSOR_SEL		(BME680_GAS_MEAS_SEL | BME680_RUN_GAS_SEL | BME680_NBCONV_SEL)
-
-/** Number of conversion settings*/
-#define BME680_NBCONV_MIN		UINT8_C(0)
-#define BME680_NBCONV_MAX		UINT8_C(10)
-
-/** Mask definitions */
-#define BME680_GAS_MEAS_MSK	UINT8_C(0x30)
-#define BME680_NBCONV_MSK	UINT8_C(0X0F)
-#define BME680_FILTER_MSK	UINT8_C(0X1C)
-#define BME680_OST_MSK		UINT8_C(0XE0)
-#define BME680_OSP_MSK		UINT8_C(0X1C)
-#define BME680_OSH_MSK		UINT8_C(0X07)
-#define BME680_HCTRL_MSK	UINT8_C(0x08)
-#define BME680_RUN_GAS_MSK	UINT8_C(0x10)
-#define BME680_MODE_MSK		UINT8_C(0x03)
-#define BME680_RHRANGE_MSK	UINT8_C(0x30)
-#define BME680_RSERROR_MSK	UINT8_C(0xf0)
-#define BME680_NEW_DATA_MSK	UINT8_C(0x80)
-#define BME680_GAS_INDEX_MSK	UINT8_C(0x0f)
-#define BME680_GAS_RANGE_MSK	UINT8_C(0x0f)
-#define BME680_GASM_VALID_MSK	UINT8_C(0x20)
-#define BME680_HEAT_STAB_MSK	UINT8_C(0x10)
-#define BME680_MEM_PAGE_MSK	UINT8_C(0x10)
-#define BME680_SPI_RD_MSK	UINT8_C(0x80)
-#define BME680_SPI_WR_MSK	UINT8_C(0x7f)
-#define	BME680_BIT_H1_DATA_MSK	UINT8_C(0x0F)
-
-/** Bit position definitions for sensor settings */
-#define BME680_GAS_MEAS_POS	UINT8_C(4)
-#define BME680_FILTER_POS	UINT8_C(2)
-#define BME680_OST_POS		UINT8_C(5)
-#define BME680_OSP_POS		UINT8_C(2)
-#define BME680_RUN_GAS_POS	UINT8_C(4)
-
-/** Array Index to Field data mapping for Calibration Data*/
-#define BME680_T2_LSB_REG	(1)
-#define BME680_T2_MSB_REG	(2)
-#define BME680_T3_REG		(3)
-#define BME680_P1_LSB_REG	(5)
-#define BME680_P1_MSB_REG	(6)
-#define BME680_P2_LSB_REG	(7)
-#define BME680_P2_MSB_REG	(8)
-#define BME680_P3_REG		(9)
-#define BME680_P4_LSB_REG	(11)
-#define BME680_P4_MSB_REG	(12)
-#define BME680_P5_LSB_REG	(13)
-#define BME680_P5_MSB_REG	(14)
-#define BME680_P7_REG		(15)
-#define BME680_P6_REG		(16)
-#define BME680_P8_LSB_REG	(19)
-#define BME680_P8_MSB_REG	(20)
-#define BME680_P9_LSB_REG	(21)
-#define BME680_P9_MSB_REG	(22)
-#define BME680_P10_REG		(23)
-#define BME680_H2_MSB_REG	(25)
-#define BME680_H2_LSB_REG	(26)
-#define BME680_H1_LSB_REG	(26)
-#define BME680_H1_MSB_REG	(27)
-#define BME680_H3_REG		(28)
-#define BME680_H4_REG		(29)
-#define BME680_H5_REG		(30)
-#define BME680_H6_REG		(31)
-#define BME680_H7_REG		(32)
-#define BME680_T1_LSB_REG	(33)
-#define BME680_T1_MSB_REG	(34)
-#define BME680_GH2_LSB_REG	(35)
-#define BME680_GH2_MSB_REG	(36)
-#define BME680_GH1_REG		(37)
-#define BME680_GH3_REG		(38)
-
-/** BME680 register buffer index settings*/
-#define BME680_REG_FILTER_INDEX		UINT8_C(5)
-#define BME680_REG_TEMP_INDEX		UINT8_C(4)
-#define BME680_REG_PRES_INDEX		UINT8_C(4)
-#define BME680_REG_HUM_INDEX		UINT8_C(2)
-#define BME680_REG_NBCONV_INDEX		UINT8_C(1)
-#define BME680_REG_RUN_GAS_INDEX	UINT8_C(1)
-#define BME680_REG_HCTRL_INDEX		UINT8_C(0)
-
-/** BME680 pressure calculation macros */
-/*! This max value is used to provide precedence to multiplication or division
- * in pressure compensation equation to achieve least loss of precision and
- * avoiding overflows.
- * i.e Comparing value, BME680_MAX_OVERFLOW_VAL = INT32_C(1 << 30)
- */
-#define BME680_MAX_OVERFLOW_VAL      INT32_C(0x40000000)
-
-/** Macro to combine two 8 bit data's to form a 16 bit data */
-#define BME680_CONCAT_BYTES(msb, lsb)	(((uint16_t)msb << 8) | (uint16_t)lsb)
-
-/** Macro to SET and GET BITS of a register */
-#define BME680_SET_BITS(reg_data, bitname, data) \
-		((reg_data & ~(bitname##_MSK)) | \
-		((data << bitname##_POS) & bitname##_MSK))
-#define BME680_GET_BITS(reg_data, bitname)	((reg_data & (bitname##_MSK)) >> \
-	(bitname##_POS))
-
-/** Macro variant to handle the bitname position if it is zero */
-#define BME680_SET_BITS_POS_0(reg_data, bitname, data) \
-				((reg_data & ~(bitname##_MSK)) | \
-				(data & bitname##_MSK))
-#define BME680_GET_BITS_POS_0(reg_data, bitname)  (reg_data & (bitname##_MSK))
-
-/** Type definitions */
-/*!
- * Generic communication function pointer
- * @param[in] dev_id: Place holder to store the id of the device structure
- *                    Can be used to store the index of the Chip select or
- *                    I2C address of the device.
- * @param[in] reg_addr:	Used to select the register the where data needs to
- *                      be read from or written to.
- * @param[in/out] reg_data: Data array to read/write
- * @param[in] len: Length of the data array
- */
-typedef int8_t (*bme680_com_fptr_t)(uint8_t dev_id, uint8_t reg_addr, uint8_t *data, uint16_t len);
-
-/*!
- * Delay function pointer
- * @param[in] period: Time period in milliseconds
- */
-typedef void (*bme680_delay_fptr_t)(uint32_t period);
-
-/*!
- * @brief Interface selection Enumerations
- */
-enum bme680_intf {
-	/*! SPI interface */
-	BME680_SPI_INTF,
-	/*! I2C interface */
-	BME680_I2C_INTF
-};
-
-/* structure definitions */
-/*!
- * @brief Sensor field data structure
- */
-struct	bme680_field_data {
-	/*! Contains new_data, gasm_valid & heat_stab */
-	uint8_t status;
-	/*! The index of the heater profile used */
-	uint8_t gas_index;
-	/*! Measurement index to track order */
-	uint8_t meas_index;
-
-#ifndef BME680_FLOAT_POINT_COMPENSATION
-	/*! Temperature in degree celsius x100 */
-	int16_t temperature;
-	/*! Pressure in Pascal */
-	uint32_t pressure;
-	/*! Humidity in % relative humidity x1000 */
-	uint32_t humidity;
-	/*! Gas resistance in Ohms */
-	uint32_t gas_resistance;
-#else
-	/*! Temperature in degree celsius */
-	float temperature;
-	/*! Pressure in Pascal */
-	float pressure;
-	/*! Humidity in % relative humidity x1000 */
-	float humidity;
-	/*! Gas resistance in Ohms */
-	float gas_resistance;
-
-#endif
-
-};
-
-/*!
- * @brief Structure to hold the Calibration data
- */
-struct	bme680_calib_data {
-	/*! Variable to store calibrated humidity data */
-	uint16_t par_h1;
-	/*! Variable to store calibrated humidity data */
-	uint16_t par_h2;
-	/*! Variable to store calibrated humidity data */
-	int8_t par_h3;
-	/*! Variable to store calibrated humidity data */
-	int8_t par_h4;
-	/*! Variable to store calibrated humidity data */
-	int8_t par_h5;
-	/*! Variable to store calibrated humidity data */
-	uint8_t par_h6;
-	/*! Variable to store calibrated humidity data */
-	int8_t par_h7;
-	/*! Variable to store calibrated gas data */
-	int8_t par_gh1;
-	/*! Variable to store calibrated gas data */
-	int16_t par_gh2;
-	/*! Variable to store calibrated gas data */
-	int8_t par_gh3;
-	/*! Variable to store calibrated temperature data */
-	uint16_t par_t1;
-	/*! Variable to store calibrated temperature data */
-	int16_t par_t2;
-	/*! Variable to store calibrated temperature data */
-	int8_t par_t3;
-	/*! Variable to store calibrated pressure data */
-	uint16_t par_p1;
-	/*! Variable to store calibrated pressure data */
-	int16_t par_p2;
-	/*! Variable to store calibrated pressure data */
-	int8_t par_p3;
-	/*! Variable to store calibrated pressure data */
-	int16_t par_p4;
-	/*! Variable to store calibrated pressure data */
-	int16_t par_p5;
-	/*! Variable to store calibrated pressure data */
-	int8_t par_p6;
-	/*! Variable to store calibrated pressure data */
-	int8_t par_p7;
-	/*! Variable to store calibrated pressure data */
-	int16_t par_p8;
-	/*! Variable to store calibrated pressure data */
-	int16_t par_p9;
-	/*! Variable to store calibrated pressure data */
-	uint8_t par_p10;
-
-#ifndef BME680_FLOAT_POINT_COMPENSATION
-	/*! Variable to store t_fine size */
-	int32_t t_fine;
-#else
-	/*! Variable to store t_fine size */
-	float t_fine;
-#endif
-	/*! Variable to store heater resistance range */
-	uint8_t res_heat_range;
-	/*! Variable to store heater resistance value */
-	int8_t res_heat_val;
-	/*! Variable to store error range */
-	int8_t range_sw_err;
-};
-
-/*!
- * @brief BME680 sensor settings structure which comprises of ODR,
- * over-sampling and filter settings.
- */
-struct	bme680_tph_sett {
-	/*! Humidity oversampling */
-	uint8_t os_hum;
-	/*! Temperature oversampling */
-	uint8_t os_temp;
-	/*! Pressure oversampling */
-	uint8_t os_pres;
-	/*! Filter coefficient */
-	uint8_t filter;
-};
-
-/*!
- * @brief BME680 gas sensor which comprises of gas settings
- *  and status parameters
- */
-struct	bme680_gas_sett {
-	/*! Variable to store nb conversion */
-	uint8_t nb_conv;
-	/*! Variable to store heater control */
-	uint8_t heatr_ctrl;
-	/*! Run gas enable value */
-	uint8_t run_gas;
-	/*! Heater temperature value */
-	uint16_t heatr_temp;
-	/*! Duration profile value */
-	uint16_t heatr_dur;
-};
-
-/*!
- * @brief BME680 device structure
- */
-struct	bme680_dev {
-	/*! Chip Id */
-	uint8_t chip_id;
-	/*! Device Id */
-	uint8_t dev_id;
-	/*! SPI/I2C interface */
-	enum bme680_intf intf;
-	/*! Memory page used */
-	uint8_t mem_page;
-	/*! Ambient temperature in Degree C */
-	int8_t amb_temp;
-	/*! Sensor calibration data */
-	struct bme680_calib_data calib;
-	/*! Sensor settings */
-	struct bme680_tph_sett tph_sett;
-	/*! Gas Sensor settings */
-	struct bme680_gas_sett gas_sett;
-	/*! Sensor power modes */
-	uint8_t power_mode;
-	/*! New sensor fields */
-	uint8_t new_fields;
-	/*! Store the info messages */
-	uint8_t info_msg;
-	/*! Bus read function pointer */
-	bme680_com_fptr_t read;
-	/*! Bus write function pointer */
-	bme680_com_fptr_t write;
-	/*! delay function pointer */
-	bme680_delay_fptr_t delay_ms;
-	/*! Communication function result */
-	int8_t com_rslt;
-};
-
-
-
-#endif /* BME680_DEFS_H_ */
-/** @}*/
-/** @}*/

lib/Bosch-BSEC/src/bsec.cpp

@@ -1,498 +0,0 @@
-/**
- * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * Neither the name of the copyright holder nor the names of the
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
- * OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
- * OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- * The information provided is believed to be accurate and reliable.
- * The copyright holder assumes no responsibility
- * for the consequences of use
- * of such information nor for any infringement of patents or
- * other rights of third parties which may result from its use.
- * No license is granted by implication or otherwise under any patent or
- * patent rights of the copyright holder.
- *
- * @file	bsec.cpp
- * @date	31 Jan 2018
- * @version	1.0
- *
- */
-
-#include "bsec.h"
-
-TwoWire *Bsec::wireObj = NULL;
-SPIClass *Bsec::spiObj = NULL;
-
-/**
- * @brief Constructor
- */
-Bsec::Bsec() {
-  nextCall = 0;
-  version.major = 0;
-  version.minor = 0;
-  version.major_bugfix = 0;
-  version.minor_bugfix = 0;
-  millisOverflowCounter = 0;
-  lastTime = 0;
-  bme680Status = BME680_OK;
-  outputTimestamp = 0;
-  _tempOffset = 0.0f;
-  status = BSEC_OK;
-  zeroOutputs();
-}
-
-/**
- * @brief Function to initialize the BSEC library and the BME680 sensor
- */
-void Bsec::begin(uint8_t devId, enum bme680_intf intf, bme680_com_fptr_t read,
-                 bme680_com_fptr_t write, bme680_delay_fptr_t idleTask) {
-  _bme680.dev_id = devId;
-  _bme680.intf = intf;
-  _bme680.read = read;
-  _bme680.write = write;
-  _bme680.delay_ms = idleTask;
-  _bme680.amb_temp = 25;
-  _bme680.power_mode = BME680_FORCED_MODE;
-
-  beginCommon();
-}
-
-/**
- * @brief Function to initialize the BSEC library and the BME680 sensor
- */
-void Bsec::begin(uint8_t i2cAddr, TwoWire &i2c) {
-  _bme680.dev_id = i2cAddr;
-  _bme680.intf = BME680_I2C_INTF;
-  _bme680.read = Bsec::i2cRead;
-  _bme680.write = Bsec::i2cWrite;
-  _bme680.delay_ms = Bsec::delay_ms;
-  _bme680.amb_temp = 25;
-  _bme680.power_mode = BME680_FORCED_MODE;
-
-  Bsec::wireObj = &i2c;
-  Bsec::wireObj->begin();
-
-  beginCommon();
-}
-
-/**
- * @brief Function to initialize the BSEC library and the BME680 sensor
- */
-void Bsec::begin(uint8_t chipSelect, SPIClass &spi) {
-  _bme680.dev_id = chipSelect;
-  _bme680.intf = BME680_SPI_INTF;
-  _bme680.read = Bsec::spiTransfer;
-  _bme680.write = Bsec::spiTransfer;
-  _bme680.delay_ms = Bsec::delay_ms;
-  _bme680.amb_temp = 25;
-  _bme680.power_mode = BME680_FORCED_MODE;
-
-  pinMode(chipSelect, OUTPUT);
-  digitalWrite(chipSelect, HIGH);
-  Bsec::spiObj = &spi;
-  Bsec::spiObj->begin();
-
-  beginCommon();
-}
-
-/**
- * @brief Common code for the begin function
- */
-void Bsec::beginCommon(void) {
-  status = bsec_init();
-
-  getVersion();
-
-  bme680Status = bme680_init(&_bme680);
-}
-
-/**
- * @brief Function that sets the desired sensors and the sample rates
- */
-void Bsec::updateSubscription(bsec_virtual_sensor_t sensorList[],
-                              uint8_t nSensors, float sampleRate) {
-  bsec_sensor_configuration_t virtualSensors[BSEC_NUMBER_OUTPUTS],
-      sensorSettings[BSEC_MAX_PHYSICAL_SENSOR];
-  uint8_t nVirtualSensors = 0, nSensorSettings = BSEC_MAX_PHYSICAL_SENSOR;
-
-  for (uint8_t i = 0; i < nSensors; i++) {
-    virtualSensors[nVirtualSensors].sensor_id = sensorList[i];
-    virtualSensors[nVirtualSensors].sample_rate = sampleRate;
-    nVirtualSensors++;
-  }
-
-  status = bsec_update_subscription(virtualSensors, nVirtualSensors,
-                                    sensorSettings, &nSensorSettings);
-  return;
-}
-
-/**
- * @brief Callback from the user to trigger reading of data from the BME680,
- * process and store outputs
- */
-bool Bsec::run(void) {
-  bool newData = false;
-  /* Check if the time has arrived to call do_steps() */
-  int64_t callTimeMs = getTimeMs();
-
-  if (callTimeMs >= nextCall) {
-
-    bsec_bme_settings_t bme680Settings;
-
-    int64_t callTimeNs = callTimeMs * INT64_C(1000000);
-
-    status = bsec_sensor_control(callTimeNs, &bme680Settings);
-    if (status < BSEC_OK)
-      return false;
-
-    nextCall =
-        bme680Settings.next_call / INT64_C(1000000); // Convert from ns to ms
-
-    bme680Status = setBme680Config(bme680Settings);
-    if (bme680Status != BME680_OK) {
-      return false;
-    }
-
-    bme680Status = bme680_set_sensor_mode(&_bme680);
-    if (bme680Status != BME680_OK) {
-      return false;
-    }
-
-    /* Wait for measurement to complete */
-    uint16_t meas_dur = 0;
-
-    bme680_get_profile_dur(&meas_dur, &_bme680);
-    delay_ms(meas_dur);
-
-    newData = readProcessData(callTimeNs, bme680Settings);
-  }
-
-  return newData;
-}
-
-/**
- * @brief Function to get the state of the algorithm to save to non-volatile
- * memory
- */
-void Bsec::getState(uint8_t *state) {
-  uint8_t workBuffer[BSEC_MAX_STATE_BLOB_SIZE];
-  uint32_t n_serialized_state = BSEC_MAX_STATE_BLOB_SIZE;
-  status = bsec_get_state(0, state, BSEC_MAX_STATE_BLOB_SIZE, workBuffer,
-                          BSEC_MAX_STATE_BLOB_SIZE, &n_serialized_state);
-}
-
-/**
- * @brief Function to set the state of the algorithm from non-volatile memory
- */
-void Bsec::setState(uint8_t *state) {
-  uint8_t workBuffer[BSEC_MAX_STATE_BLOB_SIZE];
-
-  status = bsec_set_state(state, BSEC_MAX_STATE_BLOB_SIZE, workBuffer,
-                          BSEC_MAX_STATE_BLOB_SIZE);
-}
-
-/**
- * @brief Function to set the configuration of the algorithm from memory
- */
-void Bsec::setConfig(const uint8_t *state) {
-  uint8_t workBuffer[BSEC_MAX_PROPERTY_BLOB_SIZE];
-
-  status = bsec_set_configuration(state, BSEC_MAX_PROPERTY_BLOB_SIZE,
-                                  workBuffer, sizeof(workBuffer));
-}
-
-/* Private functions */
-
-/**
- * @brief Get the version of the BSEC library
- */
-void Bsec::getVersion(void) { bsec_get_version(&version); }
-
-/**
- * @brief Read data from the BME680 and process it
- */
-bool Bsec::readProcessData(int64_t currTimeNs,
-                           bsec_bme_settings_t bme680Settings) {
-  bme680Status = bme680_get_sensor_data(&_data, &_bme680);
-  if (bme680Status != BME680_OK) {
-    return false;
-  }
-
-  bsec_input_t inputs[BSEC_MAX_PHYSICAL_SENSOR]; // Temp, Pres, Hum & Gas
-  uint8_t nInputs = 0, nOutputs = 0;
-
-  if (_data.status & BME680_NEW_DATA_MSK) {
-    if (bme680Settings.process_data & BSEC_PROCESS_TEMPERATURE) {
-      inputs[nInputs].sensor_id = BSEC_INPUT_TEMPERATURE;
-#ifdef BME680_FLOAT_POINT_COMPENSATION
-      inputs[nInputs].signal = _data.temperature;
-#else
-      inputs[nInputs].signal = _data.temperature / 100.0f;
-#endif
-      inputs[nInputs].time_stamp = currTimeNs;
-      nInputs++;
-      /* Temperature offset from the real temperature due to external heat
-       * sources */
-      inputs[nInputs].sensor_id = BSEC_INPUT_HEATSOURCE;
-      inputs[nInputs].signal = _tempOffset;
-      inputs[nInputs].time_stamp = currTimeNs;
-      nInputs++;
-    }
-    if (bme680Settings.process_data & BSEC_PROCESS_HUMIDITY) {
-      inputs[nInputs].sensor_id = BSEC_INPUT_HUMIDITY;
-#ifdef BME680_FLOAT_POINT_COMPENSATION
-      inputs[nInputs].signal = _data.humidity;
-#else
-      inputs[nInputs].signal = _data.humidity / 1000.0f;
-#endif
-      inputs[nInputs].time_stamp = currTimeNs;
-      nInputs++;
-    }
-    if (bme680Settings.process_data & BSEC_PROCESS_PRESSURE) {
-      inputs[nInputs].sensor_id = BSEC_INPUT_PRESSURE;
-      inputs[nInputs].signal = _data.pressure;
-      inputs[nInputs].time_stamp = currTimeNs;
-      nInputs++;
-    }
-    if (bme680Settings.process_data & BSEC_PROCESS_GAS) {
-      inputs[nInputs].sensor_id = BSEC_INPUT_GASRESISTOR;
-      inputs[nInputs].signal = _data.gas_resistance;
-      inputs[nInputs].time_stamp = currTimeNs;
-      nInputs++;
-    }
-  }
-
-  if (nInputs > 0) {
-    nOutputs = BSEC_NUMBER_OUTPUTS;
-    bsec_output_t _outputs[BSEC_NUMBER_OUTPUTS];
-
-    status = bsec_do_steps(inputs, nInputs, _outputs, &nOutputs);
-    if (status != BSEC_OK)
-      return false;
-
-    zeroOutputs();
-
-    if (nOutputs > 0) {
-      outputTimestamp =
-          _outputs[0].time_stamp / 1000000; // Convert from ns to ms
-
-      for (uint8_t i = 0; i < nOutputs; i++) {
-        switch (_outputs[i].sensor_id) {
-        case BSEC_OUTPUT_IAQ:
-          iaqEstimate = _outputs[i].signal;
-          iaqAccuracy = _outputs[i].accuracy;
-          break;
-        case BSEC_OUTPUT_STATIC_IAQ:
-          staticIaq = _outputs[i].signal;
-          staticIaqAccuracy = _outputs[i].accuracy;
-          break;
-        case BSEC_OUTPUT_CO2_EQUIVALENT:
-          co2Equivalent = _outputs[i].signal;
-          co2Accuracy = _outputs[i].accuracy;
-          break;
-        case BSEC_OUTPUT_BREATH_VOC_EQUIVALENT:
-          breathVocEquivalent = _outputs[i].signal;
-          breathVocAccuracy = _outputs[i].accuracy;
-          break;
-        case BSEC_OUTPUT_RAW_TEMPERATURE:
-          rawTemperature = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_RAW_PRESSURE:
-          pressure = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_RAW_HUMIDITY:
-          rawHumidity = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_RAW_GAS:
-          gasResistance = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_STABILIZATION_STATUS:
-          stabStatus = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_RUN_IN_STATUS:
-          runInStatus = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE:
-          temperature = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY:
-          humidity = _outputs[i].signal;
-          break;
-        case BSEC_OUTPUT_COMPENSATED_GAS:
-          compGasValue = _outputs[i].signal;
-          compGasAccuracy = _outputs[i].accuracy;
-          break;
-        case BSEC_OUTPUT_GAS_PERCENTAGE:
-          gasPercentage = _outputs[i].signal;
-          gasPercentageAcccuracy = _outputs[i].accuracy;
-          break;
-        default:
-          break;
-        }
-      }
-      return true;
-    }
-  }
-
-  return false;
-}
-
-/**
- * @brief Set the BME680 sensor's configuration
- */
-int8_t Bsec::setBme680Config(bsec_bme_settings_t bme680Settings) {
-  _bme680.gas_sett.run_gas = bme680Settings.run_gas;
-  _bme680.tph_sett.os_hum = bme680Settings.humidity_oversampling;
-  _bme680.tph_sett.os_temp = bme680Settings.temperature_oversampling;
-  _bme680.tph_sett.os_pres = bme680Settings.pressure_oversampling;
-  _bme680.gas_sett.heatr_temp = bme680Settings.heater_temperature;
-  _bme680.gas_sett.heatr_dur = bme680Settings.heating_duration;
-  uint16_t desired_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL |
-                              BME680_FILTER_SEL | BME680_GAS_SENSOR_SEL;
-  return bme680_set_sensor_settings(desired_settings, &_bme680);
-}
-
-/**
- * @brief Function to zero the outputs
- */
-void Bsec::zeroOutputs(void) {
-  temperature = 0.0f;
-  pressure = 0.0f;
-  humidity = 0.0f;
-  gasResistance = 0.0f;
-  rawTemperature = 0.0f;
-  rawHumidity = 0.0f;
-  stabStatus = 0.0f;
-  runInStatus = 0.0f;
-  iaqEstimate = 0.0f;
-  iaqAccuracy = 0;
-  staticIaq = 0.0f;
-  staticIaqAccuracy = 0;
-  co2Equivalent = 0.0f;
-  co2Accuracy = 0;
-  breathVocEquivalent = 0.0f;
-  breathVocAccuracy = 0;
-  compGasValue = 0.0f;
-  compGasAccuracy = 0;
-  gasPercentage = 0.0f;
-  gasPercentageAcccuracy = 0;
-}
-
-/**
- * @brief Function to calculate an int64_t timestamp in milliseconds
- */
-int64_t Bsec::getTimeMs(void) {
-  int64_t timeMs = millis();
-
-  if (lastTime > timeMs) { // An overflow occured
-    lastTime = timeMs;
-    millisOverflowCounter++;
-  }
-
-  return timeMs + (millisOverflowCounter * 0xFFFFFFFF);
-}
-
-/**
- @brief Task that delays for a ms period of time
- */
-void Bsec::delay_ms(uint32_t period) {
-  // Wait for a period amount of ms
-  // The system may simply idle, sleep or even perform background tasks
-  delay(period);
-}
-
-/**
- @brief Callback function for reading registers over I2C
- */
-int8_t Bsec::i2cRead(uint8_t devId, uint8_t regAddr, uint8_t *regData,
-                     uint16_t length) {
-  uint16_t i;
-  int8_t rslt = 0;
-  if (Bsec::wireObj) {
-    Bsec::wireObj->beginTransmission(devId);
-    Bsec::wireObj->write(regAddr);
-    rslt = Bsec::wireObj->endTransmission();
-    Bsec::wireObj->requestFrom((int)devId, (int)length);
-    for (i = 0; (i < length) && Bsec::wireObj->available(); i++) {
-      regData[i] = Bsec::wireObj->read();
-    }
-  } else {
-    rslt = -1;
-  }
-  return rslt;
-}
-
-/**
- * @brief Callback function for writing registers over I2C
- */
-int8_t Bsec::i2cWrite(uint8_t devId, uint8_t regAddr, uint8_t *regData,
-                      uint16_t length) {
-  uint16_t i;
-  int8_t rslt = 0;
-  if (Bsec::wireObj) {
-    Bsec::wireObj->beginTransmission(devId);
-    Bsec::wireObj->write(regAddr);
-    for (i = 0; i < length; i++) {
-      Bsec::wireObj->write(regData[i]);
-    }
-    rslt = Bsec::wireObj->endTransmission();
-  } else {
-    rslt = -1;
-  }
-
-  return rslt;
-}
-
-/**
- * @brief Callback function for reading and writing registers over SPI
- */
-int8_t Bsec::spiTransfer(uint8_t devId, uint8_t regAddr, uint8_t *regData,
-                         uint16_t length) {
-  int8_t rslt = 0;
-  if (Bsec::spiObj) {
-    Bsec::spiObj->beginTransaction(
-        SPISettings(4000000, MSBFIRST, SPI_MODE0)); // Can be upto 10MHz
-
-    digitalWrite(devId, LOW);
-
-    Bsec::spiObj->transfer(
-        regAddr); // Write the register address, ignore the return
-    for (uint16_t i = 0; i < length; i++)
-      regData[i] = Bsec::spiObj->transfer(regData[i]);
-
-    digitalWrite(devId, HIGH);
-    Bsec::spiObj->endTransaction();
-  } else {
-    rslt = -1;
-  }
-
-  return rslt;
-  ;
-}

lib/Bosch-BSEC/src/bsec.h

@@ -1,230 +0,0 @@
-/**
- * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * Neither the name of the copyright holder nor the names of the
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
- * OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
- * OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- * The information provided is believed to be accurate and reliable.
- * The copyright holder assumes no responsibility
- * for the consequences of use
- * of such information nor for any infringement of patents or
- * other rights of third parties which may result from its use.
- * No license is granted by implication or otherwise under any patent or
- * patent rights of the copyright holder.
- *
- * @file	bsec.h
- * @date	31 Jan 2018
- * @version	1.0
- *
- */
-
-#ifndef BSEC_CLASS_H
-#define BSEC_CLASS_H
-
-/* Includes */
-#include "Arduino.h"
-#include "Wire.h"
-#include "SPI.h"
-#include "inc/bsec_datatypes.h"
-#include "inc/bsec_interface.h"
-#include "bme680/bme680.h"
-
-/* BSEC class definition */
-class Bsec
-{
-public:
-	/* Public variables */
-	bsec_version_t version;		// Stores the version of the BSEC algorithm
-	int64_t nextCall;			// Stores the time when the algorithm has to be called next in ms
-	int8_t bme680Status;		// Placeholder for the BME680 driver's error codes
-	bsec_library_return_t status;
-	float iaqEstimate, rawTemperature, pressure, rawHumidity, gasResistance, stabStatus, runInStatus, temperature, humidity,
-	      staticIaq, co2Equivalent, breathVocEquivalent, compGasValue, gasPercentage;
-	uint8_t iaqAccuracy, staticIaqAccuracy, co2Accuracy, breathVocAccuracy, compGasAccuracy, gasPercentageAcccuracy;
-	int64_t outputTimestamp;	// Timestamp in ms of the output
-	static TwoWire *wireObj;
-	static SPIClass *spiObj;
-
-	/* Public APIs */
-	/**
-	 * @brief Constructor
-	 */
-	Bsec();
-
-	/**
-	 * @brief Function to initialize the BSEC library and the BME680 sensor
-	 * @param devId		: Device identifier parameter for the read/write interface functions
-	 * @param intf		: Physical communication interface
-	 * @param read		: Pointer to the read function
-	 * @param write		: Pointer to the write function
-	 * @param idleTask	: Pointer to the idling task
-	 */
-	void begin(uint8_t devId, enum bme680_intf intf, bme680_com_fptr_t read, bme680_com_fptr_t write, bme680_delay_fptr_t idleTask);
-	
-	/**
-	 * @brief Function to initialize the BSEC library and the BME680 sensor
-	 * @param i2cAddr	: I2C address
-	 * @param i2c		: Pointer to the TwoWire object
-	 */
-	void begin(uint8_t i2cAddr, TwoWire &i2c);
-	
-	/**
-	 * @brief Function to initialize the BSEC library and the BME680 sensor
-	 * @param chipSelect	: SPI chip select
-	 * @param spi			: Pointer to the SPIClass object
-	 */
-	void begin(uint8_t chipSelect, SPIClass &spi);
-
-	/**
-	 * @brief Function that sets the desired sensors and the sample rates
-	 * @param sensorList	: The list of output sensors
-	 * @param nSensors		: Number of outputs requested
-	 * @param sampleRate	: The sample rate of requested sensors
-	 */
-	void updateSubscription(bsec_virtual_sensor_t sensorList[], uint8_t nSensors, float sampleRate = BSEC_SAMPLE_RATE_ULP);
-
-	/**
-	 * @brief Callback from the user to trigger reading of data from the BME680, process and store outputs
-	 * @return true if there are new outputs. false otherwise
-	 */
-	bool run(void);
-
-	/**
-	 * @brief Function to get the state of the algorithm to save to non-volatile memory
-	 * @param state			: Pointer to a memory location that contains the state
-	 */
-	void getState(uint8_t *state);
-
-	/**
-	 * @brief Function to set the state of the algorithm from non-volatile memory
-	 * @param state			: Pointer to a memory location that contains the state
-	 */
-	void setState(uint8_t *state);
-
-	/**
-	 * @brief Function to set the configuration of the algorithm from memory
-	 * @param state			: Pointer to a memory location that contains the configuration
-	 */
-	void setConfig(const uint8_t *config);
-
-	/**
-	 * @brief Function to set the temperature offset
-	 * @param tempOffset	: Temperature offset in degree Celsius
-	 */
-	void setTemperatureOffset(float tempOffset)
-	{
-		_tempOffset = tempOffset;
-	}
-	
-		
-	/**
-	 * @brief Function to calculate an int64_t timestamp in milliseconds
-	 */
-	int64_t getTimeMs(void);
-	
-	/**
-	* @brief Task that delays for a ms period of time
-	* @param period	: Period of time in ms
-	*/
-	static void delay_ms(uint32_t period);
-
-	/**
-	* @brief Callback function for reading registers over I2C
-	* @param devId		: Library agnostic parameter to identify the device to communicate with
-	* @param regAddr	: Register address
-	* @param regData	: Pointer to the array containing the data to be read
-	* @param length	: Length of the array of data
-	* @return	Zero for success, non-zero otherwise
-	*/
-	static int8_t i2cRead(uint8_t devId, uint8_t regAddr, uint8_t *regData, uint16_t length);
-
-	/**
-	* @brief Callback function for writing registers over I2C
-	* @param devId		: Library agnostic parameter to identify the device to communicate with
-	* @param regAddr	: Register address
-	* @param regData	: Pointer to the array containing the data to be written
-	* @param length	: Length of the array of data
-	* @return	Zero for success, non-zero otherwise
-	*/
-	static int8_t i2cWrite(uint8_t devId, uint8_t regAddr, uint8_t *regData, uint16_t length);
-
-	/**
-	* @brief Callback function for reading and writing registers over SPI
-	* @param devId		: Library agnostic parameter to identify the device to communicate with
-	* @param regAddr	: Register address
-	* @param regData	: Pointer to the array containing the data to be read or written
-	* @param length	: Length of the array of data
-	* @return	Zero for success, non-zero otherwise
-	*/
-	static int8_t spiTransfer(uint8_t devId, uint8_t regAddr, uint8_t *regData, uint16_t length);
-
-private:
-	/* Private variables */
-	struct bme680_dev _bme680;
-	struct bme680_field_data _data;
-	float _tempOffset;
-	// Global variables to help create a millisecond timestamp that doesn't overflow every 51 days.
-	// If it overflows, it will have a negative value. Something that should never happen.
-	uint32_t millisOverflowCounter;
-	uint32_t lastTime;
-
-	/* Private APIs */
-	/**
-	 * @brief Get the version of the BSEC library
-	 */
-	void getVersion(void);
-
-	/**
-	 * @brief Read data from the BME680 and process it
-	 * @param currTimeNs: Current time in ns
-	 * @param bme680Settings: BME680 sensor's settings
-	 * @return true if there are new outputs. false otherwise
-	 */
-	bool readProcessData(int64_t currTimeNs, bsec_bme_settings_t bme680Settings);
-
-	/**
-	 * @brief Set the BME680 sensor's configuration
-	 * @param bme680Settings: Settings to configure the BME680
-	 * @return BME680 return code. BME680_OK for success, failure otherwise
-	 */
-	int8_t setBme680Config(bsec_bme_settings_t bme680Settings);
-
-	/**
-	 * @brief Common code for the begin function
-	 */
-	void beginCommon(void);
-
-	/**
-	 * @brief Function to zero the outputs
-	 */
-	void zeroOutputs(void);
-};
-
-#endif

lib/Bosch-BSEC/src/inc/bsec_datatypes.h

@@ -1,488 +0,0 @@
-/*
- * Copyright (C) 2015, 2016, 2017 Robert Bosch. All Rights Reserved. 
- *
- * Disclaimer
- *
- * Common:
- * Bosch Sensortec products are developed for the consumer goods industry. They may only be used
- * within the parameters of the respective valid product data sheet.  Bosch Sensortec products are
- * provided with the express understanding that there is no warranty of fitness for a particular purpose.
- * They are not fit for use in life-sustaining, safety or security sensitive systems or any system or device
- * that may lead to bodily harm or property damage if the system or device malfunctions. In addition,
- * Bosch Sensortec products are not fit for use in products which interact with motor vehicle systems.
- * The resale and/or use of products are at the purchasers own risk and his own responsibility. The
- * examination of fitness for the intended use is the sole responsibility of the Purchaser.
- *
- * The purchaser shall indemnify Bosch Sensortec from all third party claims, including any claims for
- * incidental, or consequential damages, arising from any product use not covered by the parameters of
- * the respective valid product data sheet or not approved by Bosch Sensortec and reimburse Bosch
- * Sensortec for all costs in connection with such claims.
- *
- * The purchaser must monitor the market for the purchased products, particularly with regard to
- * product safety and inform Bosch Sensortec without delay of all security relevant incidents.
- *
- * Engineering Samples are marked with an asterisk (*) or (e). Samples may vary from the valid
- * technical specifications of the product series. They are therefore not intended or fit for resale to third
- * parties or for use in end products. Their sole purpose is internal client testing. The testing of an
- * engineering sample may in no way replace the testing of a product series. Bosch Sensortec
- * assumes no liability for the use of engineering samples. By accepting the engineering samples, the
- * Purchaser agrees to indemnify Bosch Sensortec from all claims arising from the use of engineering
- * samples.
- *
- * Special:
- * This software module (hereinafter called "Software") and any information on application-sheets
- * (hereinafter called "Information") is provided free of charge for the sole purpose to support your
- * application work. The Software and Information is subject to the following terms and conditions:
- *
- * The Software is specifically designed for the exclusive use for Bosch Sensortec products by
- * personnel who have special experience and training. Do not use this Software if you do not have the
- * proper experience or training.
- *
- * This Software package is provided `` as is `` and without any expressed or implied warranties,
- * including without limitation, the implied warranties of merchantability and fitness for a particular
- * purpose.
- *
- * Bosch Sensortec and their representatives and agents deny any liability for the functional impairment
- * of this Software in terms of fitness, performance and safety. Bosch Sensortec and their
- * representatives and agents shall not be liable for any direct or indirect damages or injury, except as
- * otherwise stipulated in mandatory applicable law.
- *
- * The Information provided is believed to be accurate and reliable. Bosch Sensortec assumes no
- * responsibility for the consequences of use of such Information nor for any infringement of patents or
- * other rights of third parties which may result from its use. No license is granted by implication or
- * otherwise under any patent or patent rights of Bosch. Specifications mentioned in the Information are
- * subject to change without notice.
- *
- * It is not allowed to deliver the source code of the Software to any third party without permission of
- * Bosch Sensortec.
- *
- */
-
- /**
- * @file        bsec_datatypes.h
- *
- * @brief
- * Contains the data types used by BSEC
- *
- */
-
-#ifndef __BSEC_DATATYPES_H__
-#define __BSEC_DATATYPES_H__
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-/*!
- * @addtogroup bsec_interface BSEC C Interface
- * @{*/
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#endif
-#include <stdint.h>
-#include <stddef.h>
-
-#define BSEC_MAX_WORKBUFFER_SIZE     (2048)    /*!< Maximum size (in bytes) of the work buffer */
-#define BSEC_MAX_PHYSICAL_SENSOR     (8)         /*!< Number of physical sensors that need allocated space before calling bsec_update_subscription() */
-#define BSEC_MAX_PROPERTY_BLOB_SIZE  (454)     /*!< Maximum size (in bytes) of the data blobs returned by bsec_get_configuration() */
-#define BSEC_MAX_STATE_BLOB_SIZE     (139)        /*!< Maximum size (in bytes) of the data blobs returned by bsec_get_state()*/
-#define BSEC_SAMPLE_RATE_DISABLED    (65535.0f)      /*!< Sample rate of a disabled sensor */
-#define BSEC_SAMPLE_RATE_ULP         (0.0033333f)           /*!< Sample rate in case of Ultra Low Power Mode */
-#define BSEC_SAMPLE_RATE_LP          (0.33333f)            /*!< Sample rate in case of Low Power Mode */
-#define BSEC_SAMPLE_RATE_ULP_MEASUREMENT_ON_DEMAND         (0.0f)            /*!< Input value used to trigger an extra measurment (ULP plus) */        
-
-#define BSEC_PROCESS_PRESSURE       (1 << (BSEC_INPUT_PRESSURE-1))      /*!< process_data bitfield constant for pressure @sa bsec_bme_settings_t */
-#define BSEC_PROCESS_TEMPERATURE    (1 << (BSEC_INPUT_TEMPERATURE-1))   /*!< process_data bitfield constant for temperature @sa bsec_bme_settings_t */
-#define BSEC_PROCESS_HUMIDITY       (1 << (BSEC_INPUT_HUMIDITY-1))      /*!< process_data bitfield constant for humidity @sa bsec_bme_settings_t */
-#define BSEC_PROCESS_GAS            (1 << (BSEC_INPUT_GASRESISTOR-1))   /*!< process_data bitfield constant for gas sensor @sa bsec_bme_settings_t */
-#define BSEC_NUMBER_OUTPUTS         (14)     /*!< Number of outputs, depending on solution */
-#define BSEC_OUTPUT_INCLUDED        (1210863)         /*!< bitfield that indicates which outputs are included in the solution */
-
-/*!
- * @brief Enumeration for input (physical) sensors.
- *
- * Used to populate bsec_input_t::sensor_id. It is also used in bsec_sensor_configuration_t::sensor_id structs
- * returned in the parameter required_sensor_settings of bsec_update_subscription().
- *
- * @sa bsec_sensor_configuration_t @sa bsec_input_t
- */
-typedef enum
-{
-    /**
-     * @brief Pressure sensor output of BMExxx [Pa]
-     */
-    BSEC_INPUT_PRESSURE = 1,  
-
-    /**
-     * @brief Humidity sensor output of BMExxx [%]
-     *
-     * @note Relative humidity strongly depends on the temperature (it is measured at). It may require a conversion to
-     * the temperature outside of the device. 
-     *
-     * @sa bsec_virtual_sensor_t
-     */
-    BSEC_INPUT_HUMIDITY = 2,            
-
-    /**
-     * @brief Temperature sensor output of BMExxx [degrees Celsius]
-     * 
-     * @note The BME680 is factory trimmed, thus the temperature sensor of the BME680 is very accurate. 
-     * The temperature value is a very local measurement value and can be influenced by external heat sources. 
-     *
-     * @sa bsec_virtual_sensor_t
-     */
-    BSEC_INPUT_TEMPERATURE = 3,        
-
-    /**
-     * @brief Gas sensor resistance output of BMExxx [Ohm]
-     * 
-     * The resistance value changes due to varying VOC concentrations (the higher the concentration of reducing VOCs, 
-     * the lower the resistance and vice versa). 
-     */
-    BSEC_INPUT_GASRESISTOR = 4,         /*!<  */
-
-    /**
-     * @brief Additional input for device heat compensation
-     * 
-     * IAQ solution: The value is subtracted from ::BSEC_INPUT_TEMPERATURE to compute 
-     * ::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE.
-     *
-     * ALL solution: Generic heat source 1
-     * 
-     * @sa bsec_virtual_sensor_t
-     */
-    BSEC_INPUT_HEATSOURCE = 14,        
-
-    /**
-     * @brief Additional input for device heat compensation 8
-     *
-     * Generic heat source 8
-     */
-
-    
-    /**
-     * @brief Additional input that disables baseline tracker
-     *
-     * 0 - Normal  
-     * 1 - Event 1
-     * 2 - Event 2
-     */
-    BSEC_INPUT_DISABLE_BASELINE_TRACKER = 23, 
-
-} bsec_physical_sensor_t;
-
-/*!
- * @brief Enumeration for output (virtual) sensors
- *
- * Used to populate bsec_output_t::sensor_id. It is also used in bsec_sensor_configuration_t::sensor_id structs 
- * passed in the parameter requested_virtual_sensors of bsec_update_subscription().
- *
- * @sa bsec_sensor_configuration_t @sa bsec_output_t
- */
-typedef enum
-{
-    /**
-     * @brief Indoor-air-quality estimate [0-500]
-     * 
-     * Indoor-air-quality (IAQ) gives an indication of the relative change in ambient TVOCs detected by BME680. 
-     * 
-     * @note The IAQ scale ranges from 0 (clean air) to 500 (heavily polluted air). During operation, algorithms 
-     * automatically calibrate and adapt themselves to the typical environments where the sensor is operated 
-     * (e.g., home, workplace, inside a car, etc.).This automatic background calibration ensures that users experience 
-     * consistent IAQ performance. The calibration process considers the recent measurement history (typ. up to four 
-     * days) to ensure that IAQ=25 corresponds to typical good air and IAQ=250 indicates typical polluted air.
-     */
-    BSEC_OUTPUT_IAQ = 1,                           
-    BSEC_OUTPUT_STATIC_IAQ = 2,                             /*!< Unscaled indoor-air-quality estimate */ 
-    BSEC_OUTPUT_CO2_EQUIVALENT = 3,                         /*!< co2 equivalent estimate [ppm] */   
-    BSEC_OUTPUT_BREATH_VOC_EQUIVALENT = 4,                  /*!< breath VOC concentration estimate [ppm] */    	
-
-    /**
-     * @brief Temperature sensor signal [degrees Celsius]
-     * 
-     * Temperature directly measured by BME680 in degree Celsius. 
-     * 
-     * @note This value is cross-influenced by the sensor heating and device specific heating.
-     */
-    BSEC_OUTPUT_RAW_TEMPERATURE = 6,                
-
-    /**
-     * @brief Pressure sensor signal [Pa]
-     * 
-     * Pressure directly measured by the BME680 in Pa.
-     */
-    BSEC_OUTPUT_RAW_PRESSURE = 7,                   
-
-    /**
-     * @brief Relative humidity sensor signal [%] 
-     * 
-     * Relative humidity directly measured by the BME680 in %.  
-     * 
-     * @note This value is cross-influenced by the sensor heating and device specific heating.
-     */
-    BSEC_OUTPUT_RAW_HUMIDITY = 8,     
-
-    /**
-     * @brief Gas sensor signal [Ohm]
-     * 
-     * Gas resistance measured directly by the BME680 in Ohm.The resistance value changes due to varying VOC 
-     * concentrations (the higher the concentration of reducing VOCs, the lower the resistance and vice versa). 
-     */
-    BSEC_OUTPUT_RAW_GAS = 9,                
-
-    /**
-     * @brief Gas sensor stabilization status [boolean]
-     * 
-     * Indicates initial stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization 
-     * is finished (1).   
-     */
-    BSEC_OUTPUT_STABILIZATION_STATUS = 12,                 
-
-    /**
-     * @brief Gas sensor run-in status [boolean]
-     *
-     * Indicates power-on stabilization status of the gas sensor element: stabilization is ongoing (0) or stabilization 
-     * is finished (1).
-     */
-    BSEC_OUTPUT_RUN_IN_STATUS = 13,                         
-
-    /**
-     * @brief Sensor heat compensated temperature [degrees Celsius]
-     * 
-     * Temperature measured by BME680 which is compensated for the influence of sensor (heater) in degree Celsius. 
-     * The self heating introduced by the heater is depending on the sensor operation mode and the sensor supply voltage. 
-     * 
-     * 
-     * @note IAQ solution: In addition, the temperature output can be compensated by an user defined value 
-     * (::BSEC_INPUT_HEATSOURCE in degrees Celsius), which represents the device specific self-heating.
-     * 
-     * Thus, the value is calculated as follows:
-     * * IAQ solution: ```BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE = ::BSEC_INPUT_TEMPERATURE -  function(sensor operation mode, sensor supply voltage) - ::BSEC_INPUT_HEATSOURCE```
-     * * other solutions: ```::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE = ::BSEC_INPUT_TEMPERATURE -  function(sensor operation mode, sensor supply voltage)```
-     *
-     * The self-heating in operation mode BSEC_SAMPLE_RATE_ULP is negligible.
-     * The self-heating in operation mode BSEC_SAMPLE_RATE_LP is supported for 1.8V by default (no config file required). If the BME680 sensor supply voltage is 3.3V, the IoT_LP_3_3V.config shall be used.
-     */
-    BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE = 14,   
-
-    /**
-     * @brief Sensor heat compensated humidity [%] 
-     * 
-     * Relative measured by BME680 which is compensated for the influence of sensor (heater) in %.
-     * 
-     * It converts the ::BSEC_INPUT_HUMIDITY from temperature ::BSEC_INPUT_TEMPERATURE to temperature 
-     * ::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE.
-     * 
-     * @note IAQ solution: If ::BSEC_INPUT_HEATSOURCE is used for device specific temperature compensation, it will be 
-     * effective for ::BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY too.
-     */
-    BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY = 15,     
-
-    BSEC_OUTPUT_COMPENSATED_GAS = 18,         			    /*!< Reserved internal debug output */ 	
-	BSEC_OUTPUT_GAS_PERCENTAGE = 21                         /*!< percentage of min and max filtered gas value [%] */
-} bsec_virtual_sensor_t;
-
-/*!
- * @brief Enumeration for function return codes 
- */
-typedef enum
-{
-    BSEC_OK = 0,                                    /*!< Function execution successful */
-    BSEC_E_DOSTEPS_INVALIDINPUT = -1,               /*!< Input (physical) sensor id passed to bsec_do_steps() is not in the valid range or not valid for requested virtual sensor */
-    BSEC_E_DOSTEPS_VALUELIMITS = -2,                /*!< Value of input (physical) sensor signal passed to bsec_do_steps() is not in the valid range */
-    BSEC_E_DOSTEPS_DUPLICATEINPUT = -6,             /*!< Duplicate input (physical) sensor ids passed as input to bsec_do_steps() */
-    BSEC_I_DOSTEPS_NOOUTPUTSRETURNABLE = 2,         /*!< No memory allocated to hold return values from bsec_do_steps(), i.e., n_outputs == 0 */
-    BSEC_W_DOSTEPS_EXCESSOUTPUTS = 3,               /*!< Not enough memory allocated to hold return values from bsec_do_steps(), i.e., n_outputs < maximum number of requested output (virtual) sensors */
-    BSEC_W_DOSTEPS_TSINTRADIFFOUTOFRANGE = 4,       /*!< Duplicate timestamps passed to bsec_do_steps() */
-    BSEC_E_SU_WRONGDATARATE = -10,                  /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() is zero */
-    BSEC_E_SU_SAMPLERATELIMITS = -12,               /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() does not match with the sampling rate allowed for that sensor */
-    BSEC_E_SU_DUPLICATEGATE = -13,                  /*!< Duplicate output (virtual) sensor ids requested through bsec_update_subscription() */
-    BSEC_E_SU_INVALIDSAMPLERATE = -14,              /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() does not fall within the global minimum and maximum sampling rates  */
-    BSEC_E_SU_GATECOUNTEXCEEDSARRAY = -15,          /*!< Not enough memory allocated to hold returned input (physical) sensor data from bsec_update_subscription(), i.e., n_required_sensor_settings < #BSEC_MAX_PHYSICAL_SENSOR */
-    BSEC_E_SU_SAMPLINTVLINTEGERMULT = -16,          /*!< The sample_rate of the requested output (virtual) sensor passed to bsec_update_subscription() is not correct */
-    BSEC_E_SU_MULTGASSAMPLINTVL = -17,              /*!< The sample_rate of the requested output (virtual), which requires the gas sensor, is not equal to the sample_rate that the gas sensor is being operated */
-    BSEC_E_SU_HIGHHEATERONDURATION = -18,           /*!< The duration of one measurement is longer than the requested sampling interval */
-    BSEC_W_SU_UNKNOWNOUTPUTGATE = 10,               /*!< Output (virtual) sensor id passed to bsec_update_subscription() is not in the valid range; e.g., n_requested_virtual_sensors > actual number of output (virtual) sensors requested */
-    BSEC_W_SU_MODINNOULP = 11,                      /*!< ULP plus can not be requested in non-ulp mode */ /*MOD_ONLY*/
-    BSEC_I_SU_SUBSCRIBEDOUTPUTGATES = 12,           /*!< No output (virtual) sensor data were requested via bsec_update_subscription() */
-    BSEC_E_PARSE_SECTIONEXCEEDSWORKBUFFER = -32,    /*!< n_work_buffer_size passed to bsec_set_[configuration/state]() not sufficient */
-    BSEC_E_CONFIG_FAIL = -33,                       /*!< Configuration failed */
-    BSEC_E_CONFIG_VERSIONMISMATCH = -34,            /*!< Version encoded in serialized_[settings/state] passed to bsec_set_[configuration/state]() does not match with current version */
-    BSEC_E_CONFIG_FEATUREMISMATCH = -35,            /*!< Enabled features encoded in serialized_[settings/state] passed to bsec_set_[configuration/state]() does not match with current library implementation */
-    BSEC_E_CONFIG_CRCMISMATCH = -36,                /*!< serialized_[settings/state] passed to bsec_set_[configuration/state]() is corrupted */
-    BSEC_E_CONFIG_EMPTY = -37,                      /*!< n_serialized_[settings/state] passed to bsec_set_[configuration/state]() is to short to be valid */
-    BSEC_E_CONFIG_INSUFFICIENTWORKBUFFER = -38,     /*!< Provided work_buffer is not large enough to hold the desired string */
-    BSEC_E_CONFIG_INVALIDSTRINGSIZE = -40,          /*!< String size encoded in configuration/state strings passed to bsec_set_[configuration/state]() does not match with the actual string size n_serialized_[settings/state] passed to these functions */
-    BSEC_E_CONFIG_INSUFFICIENTBUFFER = -41,         /*!< String buffer insufficient to hold serialized data from BSEC library */
-    BSEC_E_SET_INVALIDCHANNELIDENTIFIER = -100,     /*!< Internal error code, size of work buffer in setConfig must be set to BSEC_MAX_WORKBUFFER_SIZE */
-    BSEC_E_SET_INVALIDLENGTH = -104,                /*!< Internal error code */
-    BSEC_W_SC_CALL_TIMING_VIOLATION = 100,          /*!< Difference between actual and defined sampling intervals of bsec_sensor_control() greater than allowed */
-    BSEC_W_SC_MODEXCEEDULPTIMELIMIT = 101,          /*!< ULP plus is not allowed because an ULP measurement just took or will take place */ /*MOD_ONLY*/
-    BSEC_W_SC_MODINSUFFICIENTWAITTIME = 102         /*!< ULP plus is not allowed because not sufficient time passed since last ULP plus */ /*MOD_ONLY*/
-} bsec_library_return_t;
-
-/*!
- * @brief Structure containing the version information
- *
- * Please note that configuration and state strings are coded to a specific version and will not be accepted by other 
- * versions of BSEC.
- * 
- */
-typedef struct
-{
-    uint8_t major; /**< @brief Major version */
-    uint8_t minor; /**< @brief Minor version */
-    uint8_t major_bugfix; /**< @brief Major bug fix version */
-    uint8_t minor_bugfix; /**< @brief Minor bug fix version */
-} bsec_version_t;
-
-/*!
- * @brief Structure describing an input sample to the library
- *
- * Each input sample is provided to BSEC as an element in a struct array of this type. Timestamps must be provided 
- * in nanosecond  resolution. Moreover, duplicate timestamps for subsequent samples are not allowed and will results in 
- * an error code being returned from bsec_do_steps().
- *
- * The meaning unit of the signal field are determined by the bsec_input_t::sensor_id field content. Possible 
- * bsec_input_t::sensor_id values and and their meaning are described in ::bsec_physical_sensor_t.
- *
- * @sa bsec_physical_sensor_t
- * 
- */
-typedef struct
-{
-    /**
-     * @brief Time stamp in nanosecond resolution [ns]
-     *
-     * Timestamps must be provided as non-repeating and increasing values. They can have their 0-points at system start or
-     * at a defined wall-clock time (e.g., 01-Jan-1970 00:00:00)
-     */
-    int64_t time_stamp;        
-    float signal;               /*!< @brief Signal sample in the unit defined for the respective sensor_id @sa bsec_physical_sensor_t */
-    uint8_t signal_dimensions;  /*!< @brief Signal dimensions (reserved for future use, shall be set to 1) */
-    uint8_t sensor_id;          /*!< @brief Identifier of physical sensor @sa bsec_physical_sensor_t */
-} bsec_input_t;
-
-/*!
- * @brief Structure describing an output sample of the library
- *
- * Each output sample is returned from BSEC by populating the element of a struct array of this type. The contents of 
- * the signal field is defined by the supplied bsec_output_t::sensor_id. Possible output 
- * bsec_output_t::sensor_id values are defined in ::bsec_virtual_sensor_t. 
- *
- * @sa bsec_virtual_sensor_t
- */
-typedef struct
-{
-    int64_t time_stamp;         /*!< @brief Time stamp in nanosecond resolution as provided as input [ns] */
-    float signal;               /*!< @brief Signal sample in the unit defined for the respective bsec_output_t::sensor_id @sa bsec_virtual_sensor_t */
-    uint8_t signal_dimensions;  /*!< @brief Signal dimensions (reserved for future use, shall be set to 1) */
-    uint8_t sensor_id;          /*!< @brief Identifier of virtual sensor @sa bsec_virtual_sensor_t  */
-    
-    /**
-     * @brief Accuracy status 0-3
-     *
-     * Some virtual sensors provide a value in the accuracy field. If this is the case, the meaning of the field is as 
-     * follows:
-     *
-     * | Name                       | Value |  Accuracy description                                       |
-     * |----------------------------|-------|-------------------------------------------------------------|
-     * | UNRELIABLE                 |   0   | Sensor data is unreliable, the sensor must be calibrated    |
-     * | LOW_ACCURACY               |   1   | Low accuracy, sensor should be calibrated                   |
-     * | MEDIUM_ACCURACY            |   2   | Medium accuracy, sensor calibration may improve performance |
-     * | HIGH_ACCURACY              |   3   | High accuracy                                               |
-     *
-     * For example:
-     * 
-     * - Ambient temperature accuracy is derived from change in the temperature in 1 minute.
-     * 
-     *   | Virtual sensor       | Value |  Accuracy description                                                        |
-     *   |--------------------- |-------|------------------------------------------------------------------------------|
-     *   | Ambient temperature  |   0   | The difference in ambient temperature is greater than 4 degree in one minute |
-     *   |                      |   1   | The difference in ambient temperature is less than 4 degree in one minute    |
-     *   |                      |   2   | The difference in ambient temperature is less than 3 degree in one minute    |
-     *   |                      |   3   | The difference in ambient temperature is less than 2 degree in one minute    |
-     * 
-     * - IAQ accuracy indicator will notify the user when she/he should initiate a calibration process. Calibration is 
-     *   performed automatically in the background if the sensor is exposed to clean and polluted air for approximately 
-     *   30 minutes each.
-     * 
-     *   | Virtual sensor             | Value |  Accuracy description                                           |
-     *   |----------------------------|-------|-----------------------------------------------------------------|
-     *   | IAQ                        |   0   | The sensor is not yet stabilized or in a run-in status           |
-     *   |                            |   1   | Calibration required                                            |
-     *   |                            |   2   | Calibration on-going                                            |
-     *   |                            |   3   | Calibration is done, now IAQ estimate achieves best performance  |
-     */     
-    uint8_t accuracy;           
-} bsec_output_t;
-
-/*!
- * @brief Structure describing sample rate of physical/virtual sensors
- *
- * This structure is used together with bsec_update_subscription() to enable BSEC outputs and to retrieve information
- * about the sample rates used for BSEC inputs.
- */
-typedef struct
-{
-    /**
-     * @brief Sample rate of the virtual or physical sensor in Hertz [Hz]
-     *
-     * Only supported sample rates are allowed.
-     */
-    float sample_rate;           
-        
-    /**
-     * @brief Identifier of the virtual or physical sensor
-     *
-     * The meaning of this field changes depending on whether the structs are as the requested_virtual_sensors argument
-     * to bsec_update_subscription() or as the required_sensor_settings argument.
-     *
-     * | bsec_update_subscription() argument | sensor_id field interpretation |
-     * |-------------------------------------|--------------------------------|
-     * | requested_virtual_sensors           | ::bsec_virtual_sensor_t        |
-     * | required_sensor_settings            | ::bsec_physical_sensor_t       |
-     *
-     * @sa bsec_physical_sensor_t 
-     * @sa bsec_virtual_sensor_t 
-     */
-    uint8_t sensor_id;              
-} bsec_sensor_configuration_t;
-
-/*!
- * @brief Structure returned by bsec_sensor_control() to configure BMExxx sensor  
- *
- * This structure contains settings that must be used to configure the BMExxx to perform a forced-mode measurement. 
- * A measurement should only be executed if bsec_bme_settings_t::trigger_measurement is 1. If so, the oversampling 
- * settings for temperature, humidity, and pressure should be set to the provided settings provided in 
- * bsec_bme_settings_t::temperature_oversampling, bsec_bme_settings_t::humidity_oversampling, and
- * bsec_bme_settings_t::pressure_oversampling, respectively. 
- *
- * In case of bsec_bme_settings_t::run_gas = 1, the gas sensor must be enabled with the provided 
- * bsec_bme_settings_t::heater_temperature and bsec_bme_settings_t::heating_duration settings.
- */
-typedef struct
-{
-    int64_t next_call;                  /*!< @brief Time stamp of the next call of the sensor_control*/
-    uint32_t process_data;              /*!< @brief Bit field describing which data is to be passed to bsec_do_steps() @sa BSEC_PROCESS_* */
-    uint16_t heater_temperature;        /*!< @brief Heating temperature [degrees Celsius] */
-    uint16_t heating_duration;          /*!< @brief Heating duration [ms] */
-    uint8_t run_gas;                    /*!< @brief Enable gas measurements [0/1] */
-    uint8_t pressure_oversampling;      /*!< @brief Pressure oversampling settings [0-5] */
-    uint8_t temperature_oversampling;   /*!< @brief Temperature oversampling settings [0-5] */
-    uint8_t humidity_oversampling;      /*!< @brief Humidity oversampling settings [0-5] */
-    uint8_t trigger_measurement;        /*!< @brief Trigger a forced measurement with these settings now [0/1] */
-} bsec_bme_settings_t;
-
-/* internal defines and backward compatibility */
-#define BSEC_STRUCT_NAME            Bsec                       /*!< Internal struct name */
-
-/*@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

lib/Bosch-BSEC/src/inc/bsec_interface.h

@@ -1,564 +0,0 @@
-/*
- * Copyright (C) 2015, 2016, 2017 Robert Bosch. All Rights Reserved. 
- *
- * Disclaimer
- *
- * Common:
- * Bosch Sensortec products are developed for the consumer goods industry. They may only be used
- * within the parameters of the respective valid product data sheet.  Bosch Sensortec products are
- * provided with the express understanding that there is no warranty of fitness for a particular purpose.
- * They are not fit for use in life-sustaining, safety or security sensitive systems or any system or device
- * that may lead to bodily harm or property damage if the system or device malfunctions. In addition,
- * Bosch Sensortec products are not fit for use in products which interact with motor vehicle systems.
- * The resale and/or use of products are at the purchasers own risk and his own responsibility. The
- * examination of fitness for the intended use is the sole responsibility of the Purchaser.
- *
- * The purchaser shall indemnify Bosch Sensortec from all third party claims, including any claims for
- * incidental, or consequential damages, arising from any product use not covered by the parameters of
- * the respective valid product data sheet or not approved by Bosch Sensortec and reimburse Bosch
- * Sensortec for all costs in connection with such claims.
- *
- * The purchaser must monitor the market for the purchased products, particularly with regard to
- * product safety and inform Bosch Sensortec without delay of all security relevant incidents.
- *
- * Engineering Samples are marked with an asterisk (*) or (e). Samples may vary from the valid
- * technical specifications of the product series. They are therefore not intended or fit for resale to third
- * parties or for use in end products. Their sole purpose is internal client testing. The testing of an
- * engineering sample may in no way replace the testing of a product series. Bosch Sensortec
- * assumes no liability for the use of engineering samples. By accepting the engineering samples, the
- * Purchaser agrees to indemnify Bosch Sensortec from all claims arising from the use of engineering
- * samples.
- *
- * Special:
- * This software module (hereinafter called "Software") and any information on application-sheets
- * (hereinafter called "Information") is provided free of charge for the sole purpose to support your
- * application work. The Software and Information is subject to the following terms and conditions:
- *
- * The Software is specifically designed for the exclusive use for Bosch Sensortec products by
- * personnel who have special experience and training. Do not use this Software if you do not have the
- * proper experience or training.
- *
- * This Software package is provided `` as is `` and without any expressed or implied warranties,
- * including without limitation, the implied warranties of merchantability and fitness for a particular
- * purpose.
- *
- * Bosch Sensortec and their representatives and agents deny any liability for the functional impairment
- * of this Software in terms of fitness, performance and safety. Bosch Sensortec and their
- * representatives and agents shall not be liable for any direct or indirect damages or injury, except as
- * otherwise stipulated in mandatory applicable law.
- *
- * The Information provided is believed to be accurate and reliable. Bosch Sensortec assumes no
- * responsibility for the consequences of use of such Information nor for any infringement of patents or
- * other rights of third parties which may result from its use. No license is granted by implication or
- * otherwise under any patent or patent rights of Bosch. Specifications mentioned in the Information are
- * subject to change without notice.
- *
- * It is not allowed to deliver the source code of the Software to any third party without permission of
- * Bosch Sensortec.
- *
- */
- /*!
- * 
- * @file        bsec_interface.h
- *
- * @brief
- * Contains the API for BSEC
- *
- */
-
-
-#ifndef __BSEC_INTERFACE_H__
-#define __BSEC_INTERFACE_H__
-
-#include "bsec_datatypes.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
- /*! @addtogroup bsec_interface BSEC C Interface
- *   @brief Interfaces of BSEC signal processing library
- *
- * ### Interface usage
- * 
- * The following provides a short overview on the typical operation sequence for BSEC.
- * 
- * - Initialization of the library
- * 
- * | Steps                                                               | Function                 |
- * |---------------------------------------------------------------------|--------------------------|
- * | Initialization of library                                           | bsec_init()              |
- * | Update configuration settings (optional)                            | bsec_set_configuration() |
- * | Restore the state of the library (optional)                         | bsec_set_state()         |
- *
- * 
- * - The following function is called to enable output signals and define their sampling rate / operation mode.
- * 
- * | Steps                                       |  Function                  |
- * |---------------------------------------------|----------------------------|
- * | Enable library outputs with specified mode  | bsec_update_subscription() |
- *
- * 
- * - This table describes the main processing loop.
- * 
- * | Steps                                     | Function                         |
- * |-------------------------------------------|----------------------------------|
- * | Retrieve sensor settings to be used       | bsec_sensor_control()            |
- * | Configure sensor and trigger measurement  | See BME680 API and example codes |
- * | Read results from sensor                  | See BME680 API and example codes |
- * | Perform signal processing                 | bsec_do_steps()                  |
- *
- * 
- * - Before shutting down the system, the current state of BSEC can be retrieved and can then be used during 
- *   re-initialization to continue processing.
- *   
- * | Steps                                  | Function          |
- * |----------------------------------------|-------------------|
- * | To retrieve the current library state  |  bsec_get_state() |
- * 
- * 
- * 
- * ### Configuration and state                       
- * 
- * Values of variables belonging to a BSEC instance are divided into two groups:
- *  - Values **not updated by processing** of signals belong to the **configuration group**. If available, BSEC can be 
- *    configured before use with a customer specific configuration string.
- *  - Values **updated during processing** are member of the **state group**. Saving and restoring of the state of BSEC 
- *    is necessary to maintain previously estimated sensor models and baseline information which is important for best 
- *    performance of the gas sensor outputs.
- * 
- * @note BSEC library consists of adaptive algorithms which models the gas sensor which improves its performance over 
- *       the time. These will be lost if library is initialized due to system reset. In order to avoid this situation 
- *       library state shall be stored in non volatile memory so that it can be loaded after system reset.
- *
- * 
- *   @{
- */
-
-
-/*!
- * @brief Return the version information of BSEC library
- *
- * @param [out]     bsec_version_p      pointer to struct which is to be populated with the version information
- *
- * @return Zero if successful, otherwise an error code
- *
- * See also: bsec_version_t
- *
-  \code{.c}
-    // Example // 
-    bsec_version_t  version;
-    bsec_get_version(&version);
-    printf("BSEC version: %d.%d.%d.%d",version.major, version.minor, version.major_bugfix, version.minor_bugfix);
- 
-  \endcode
-*/
-
-bsec_library_return_t bsec_get_version(bsec_version_t * bsec_version_p);
-
-
-/*!
- * @brief Initialize the library
- *
- * Initialization and reset of BSEC is performed by calling bsec_init(). Calling this function sets up the relation 
- * among all internal modules, initializes run-time dependent library states and resets the configuration and state
- * of all BSEC signal processing modules to defaults.
- * 
- * Before any further use, the library must be initialized. This ensure that all memory and states are in defined
- * conditions prior to processing any data.
- *
- * @return Zero if successful, otherwise an error code
- *
-  \code{.c}
- 
-    // Initialize BSEC library before further use
-    bsec_init();
-
-  \endcode
-*/
-
-bsec_library_return_t bsec_init(void);
-
-/*!
- * @brief Subscribe to library virtual sensors outputs
- *
- * Use bsec_update_subscription() to instruct BSEC which of the processed output signals are requested at which sample rates.
- * See ::bsec_virtual_sensor_t for available library outputs. 
- *
- * Based on the requested virtual sensors outputs, BSEC will provide information about the required physical sensor input signals 
- * (see ::bsec_physical_sensor_t) with corresponding sample rates. This information is purely informational as bsec_sensor_control()
- * will ensure the sensor is operated in the required manner. To disable a virtual sensor, set the sample rate to BSEC_SAMPLE_RATE_DISABLED.
- *
- * The subscription update using bsec_update_subscription() is apart from the signal processing one of the the most 
- * important functions. It allows to enable the desired library outputs. The function determines which physical input 
- * sensor signals are required at which sample rate to produce the virtual output sensor signals requested by the user. 
- * When this function returns with success, the requested outputs are called subscribed. A very important feature is the 
- * retaining of already subscribed outputs. Further outputs can be requested or disabled both individually and 
- * group-wise in addition to already subscribed outputs without changing them unless a change of already subscribed 
- * outputs is requested.
- *
- * @note The state of the library concerning the subscribed outputs cannot be retained among reboots.
- *
- * The interface of bsec_update_subscription() requires the usage of arrays of sensor configuration structures. 
- * Such a structure has the fields sensor identifier and sample rate. These fields have the properties:
- *  - Output signals of virtual sensors must be requested using unique identifiers (Member of ::bsec_virtual_sensor_t)
- *  - Different sets of identifiers are available for inputs of physical sensors and outputs of virtual sensors
- *  - Identifiers are unique values defined by the library, not from external
- *  - Sample rates must be provided as value of
- *     - An allowed sample rate for continuously sampled signals
- *     - 65535.0f (BSEC_SAMPLE_RATE_DISABLED) to turn off outputs and identify disabled inputs
- *
- * @note The same sensor identifiers are also used within the functions bsec_do_steps().
- *
- * The usage principles of bsec_update_subscription() are:
- *  - Differential updates (i.e., only asking for outputs that the user would like to change) is supported.
- *  - Invalid requests of outputs are ignored. Also if one of the requested outputs is unavailable, all the requests 
- *    are ignored. At the same time, a warning is returned.
- *  - To disable BSEC, all outputs shall be turned off. Only enabled (subscribed) outputs have to be disabled while 
- *    already disabled outputs do not have to be disabled explicitly.
- *
- * @param[in]       requested_virtual_sensors       Pointer to array of requested virtual sensor (output) configurations for the library
- * @param[in]       n_requested_virtual_sensors     Number of virtual sensor structs pointed by requested_virtual_sensors
- * @param[out]      required_sensor_settings        Pointer to array of required physical sensor configurations for the library
- * @param[in,out]   n_required_sensor_settings      [in] Size of allocated required_sensor_settings array, [out] number of sensor configurations returned
- *
- * @return Zero when successful, otherwise an error code
- *
- * @sa bsec_sensor_configuration_t
- * @sa bsec_physical_sensor_t
- * @sa bsec_virtual_sensor_t
- *
-  \code{.c}
-    // Example //
-
-    // Change 3 virtual sensors (switch IAQ and raw temperature -> on / pressure -> off) 
-    bsec_sensor_configuration_t requested_virtual_sensors[3];
-    uint8_t n_requested_virtual_sensors = 3;
- 
-    requested_virtual_sensors[0].sensor_id = BSEC_OUTPUT_IAQ;
-    requested_virtual_sensors[0].sample_rate = BSEC_SAMPLE_RATE_ULP; 
-    requested_virtual_sensors[1].sensor_id = BSEC_OUTPUT_RAW_TEMPERATURE;
-    requested_virtual_sensors[1].sample_rate = BSEC_SAMPLE_RATE_ULP; 
-    requested_virtual_sensors[2].sensor_id = BSEC_OUTPUT_RAW_PRESSURE;
-    requested_virtual_sensors[2].sample_rate = BSEC_SAMPLE_RATE_DISABLED; 
-    
-    // Allocate a struct for the returned physical sensor settings
-    bsec_sensor_configuration_t required_sensor_settings[BSEC_MAX_PHYSICAL_SENSOR];
-    uint8_t  n_required_sensor_settings = BSEC_MAX_PHYSICAL_SENSOR;
- 
-    // Call bsec_update_subscription() to enable/disable the requested virtual sensors
-    bsec_update_subscription(requested_virtual_sensors, n_requested_virtual_sensors, required_sensor_settings, &n_required_sensor_settings);
-  \endcode
- *
- */
-bsec_library_return_t bsec_update_subscription(const bsec_sensor_configuration_t * const requested_virtual_sensors,
-                const uint8_t n_requested_virtual_sensors, bsec_sensor_configuration_t * required_sensor_settings,
-                uint8_t * n_required_sensor_settings);
-
-
-/*!
- * @brief Main signal processing function of BSEC
- *
- *
- * Processing of the input signals and returning of output samples is performed by bsec_do_steps().
- * - The samples of all library inputs must be passed with unique identifiers representing the input signals from 
- *   physical sensors where the order of these inputs can be chosen arbitrary. However, all input have to be provided 
- *   within the same time period as they are read. A sequential provision to the library might result in undefined 
- *   behavior.
- * - The samples of all library outputs are returned with unique identifiers corresponding to the output signals of 
- *   virtual sensors where the order of the returned outputs may be arbitrary.
- * - The samples of all input as well as output signals of physical as well as virtual sensors use the same 
- *   representation in memory with the following fields:
- * - Sensor identifier:
- *   - For inputs: required to identify the input signal from a physical sensor
- *   - For output: overwritten by bsec_do_steps() to identify the returned signal from a virtual sensor
- *   - Time stamp of the sample
- *
- * Calling bsec_do_steps() requires the samples of the input signals to be provided along with their time stamp when 
- * they are recorded and only when they are acquired. Repetition of samples with the same time stamp are ignored and 
- * result in a warning. Repetition of values of samples which are not acquired anew by a sensor result in deviations 
- * of the computed output signals. Concerning the returned output samples, an important feature is, that a value is 
- * returned for an output only when a new occurrence has been computed. A sample of an output signal is returned only 
- * once.
- *
- *
- * @param[in]       inputs          Array of input data samples. Each array element represents a sample of a different physical sensor.
- * @param[in]       n_inputs        Number of passed input data structs.
- * @param[out]      outputs         Array of output data samples. Each array element represents a sample of a different virtual sensor.
- * @param[in,out]   n_outputs       [in] Number of allocated output structs, [out] number of outputs returned
- *
- * @return Zero when successful, otherwise an error code
- *
-
- \code{.c}
-    // Example //
-        
-    // Allocate input and output memory
-    bsec_input_t input[3];
-    uint8_t n_input = 3;
-    bsec_output_t output[2];
-    uint8_t  n_output=2;
-
-    bsec_library_return_t status;
-
-    // Populate the input structs, assuming the we have timestamp (ts), 
-    // gas sensor resistance (R), temperature (T), and humidity (rH) available
-    // as input variables
-    input[0].sensor_id = BSEC_INPUT_GASRESISTOR;
-    input[0].signal = R;
-    input[0].time_stamp= ts;   
-    input[1].sensor_id = BSEC_INPUT_TEMPERATURE;   
-    input[1].signal = T;   
-    input[1].time_stamp= ts;   
-    input[2].sensor_id = BSEC_INPUT_HUMIDITY;
-    input[2].signal = rH;
-    input[2].time_stamp= ts;   
-
-        
-    // Invoke main processing BSEC function
-    status = bsec_do_steps( input, n_input, output, &n_output );
-
-    // Iterate through the BSEC output data, if the call succeeded
-    if(status == BSEC_OK)
-    {
-        for(int i = 0; i < n_output; i++)
-        {   
-            switch(output[i].sensor_id)
-            {
-                case BSEC_OUTPUT_IAQ:
-                    // Retrieve the IAQ results from output[i].signal
-                    // and do something with the data
-                    break;
-                case BSEC_OUTPUT_AMBIENT_TEMPERATURE:
-                    // Retrieve the ambient temperature results from output[i].signal
-                    // and do something with the data
-                    break;
-                
-            }
-        }
-    }
-    
- \endcode
- */
- 
-bsec_library_return_t bsec_do_steps(const bsec_input_t * const inputs, const uint8_t n_inputs, bsec_output_t * outputs, uint8_t * n_outputs);
-
-
-/*!
- * @brief Reset a particular virtual sensor output
- *
- * This function allows specific virtual sensor outputs to be reset. The meaning of "reset" depends on the specific 
- * output. In case of the IAQ output, reset means zeroing the output to the current ambient conditions.
- *
- * @param[in]       sensor_id           Virtual sensor to be reset
- *
- * @return Zero when successful, otherwise an error code
- *
- *
-  \code{.c}
-    // Example // 
-    bsec_reset_output(BSEC_OUTPUT_IAQ);
-
-  \endcode
- */
-
-bsec_library_return_t bsec_reset_output(uint8_t sensor_id);
-
-
-/*!
- * @brief Update algorithm configuration parameters
- *
- * BSEC uses a default configuration for the modules and common settings. The initial configuration can be customized 
- * by bsec_set_configuration(). This is an optional step.
- * 
- * @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose 
- * the serialization and apply it to the library and its modules. Please use #BSEC_MAX_PROPERTY_BLOB_SIZE for allotting 
- * the required size.
- *
- * @param[in]       serialized_settings     Settings serialized to a binary blob
- * @param[in]       n_serialized_settings   Size of the settings blob
- * @param[in,out]   work_buffer             Work buffer used to parse the blob
- * @param[in]       n_work_buffer_size      Length of the work buffer available for parsing the blob
- *
- * @return Zero when successful, otherwise an error code
- *
-  \code{.c}
-    // Example // 
-    
-    // Allocate variables
-    uint8_t serialized_settings[BSEC_MAX_PROPERTY_BLOB_SIZE];
-    uint32_t n_serialized_settings_max = BSEC_MAX_PROPERTY_BLOB_SIZE;
-    uint8_t work_buffer[BSEC_MAX_PROPERTY_BLOB_SIZE];
-    uint32_t n_work_buffer = BSEC_MAX_PROPERTY_BLOB_SIZE;
-
-    // Here we will load a provided config string into serialized_settings 
-    
-    // Apply the configuration
-    bsec_set_configuration(serialized_settings, n_serialized_settings_max, work_buffer, n_work_buffer);
-
-  \endcode
- */
-
-bsec_library_return_t bsec_set_configuration(const uint8_t * const serialized_settings,
-                const uint32_t n_serialized_settings, uint8_t * work_buffer,
-                const uint32_t n_work_buffer_size);
-
-
-/*!
- * @brief Restore the internal state of the library
- *
- * BSEC uses a default state for all signal processing modules and the BSEC module. To ensure optimal performance, 
- * especially of the gas sensor functionality, it is recommended to retrieve the state using bsec_get_state()
- * before unloading the library, storing it in some form of non-volatile memory, and setting it using bsec_set_state() 
- * before resuming further operation of the library.
- * 
- * @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose the 
- * serialization and apply it to the library and its modules. Please use #BSEC_MAX_PROPERTY_BLOB_SIZE for allotting the 
- * required size.
- *
- * @param[in]       serialized_state        States serialized to a binary blob
- * @param[in]       n_serialized_state      Size of the state blob
- * @param[in,out]   work_buffer             Work buffer used to parse the blob
- * @param[in]       n_work_buffer_size      Length of the work buffer available for parsing the blob
- *
- * @return Zero when successful, otherwise an error code
- *
-  \code{.c}
-    // Example // 
-  
-    // Allocate variables
-    uint8_t serialized_state[BSEC_MAX_PROPERTY_BLOB_SIZE];
-    uint32_t  n_serialized_state = BSEC_MAX_PROPERTY_BLOB_SIZE;
-    uint8_t work_buffer_state[BSEC_MAX_PROPERTY_BLOB_SIZE];
-    uint32_t  n_work_buffer_size = BSEC_MAX_PROPERTY_BLOB_SIZE;
-
-    // Here we will load a state string from a previous use of BSEC
-
-    // Apply the previous state to the current BSEC session
-    bsec_set_state(serialized_state, n_serialized_state, work_buffer_state, n_work_buffer_size);
-
-  \endcode
-*/
-
-bsec_library_return_t bsec_set_state(const uint8_t * const serialized_state, const uint32_t n_serialized_state,
-                uint8_t * work_buffer, const uint32_t n_work_buffer_size);
-
-
-/*!
- * @brief Retrieve the current library configuration
- *
- * BSEC allows to retrieve the current configuration using bsec_get_configuration(). Returns a binary blob encoding 
- * the current configuration parameters of the library in a format compatible with bsec_set_configuration().
- *
- * @note The function bsec_get_configuration() is required to be used for debugging purposes only.
- * @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose the 
- * serialization and apply it to the library and its modules. Please use #BSEC_MAX_PROPERTY_BLOB_SIZE for allotting the 
- * required size.
- * 
- *
- * @param[in]       config_id                   Identifier for a specific set of configuration settings to be returned;
- *                                              shall be zero to retrieve all configuration settings.
- * @param[out]      serialized_settings         Buffer to hold the serialized config blob
- * @param[in]       n_serialized_settings_max   Maximum available size for the serialized settings
- * @param[in,out]   work_buffer                 Work buffer used to parse the binary blob
- * @param[in]       n_work_buffer               Length of the work buffer available for parsing the blob
- * @param[out]      n_serialized_settings       Actual size of the returned serialized configuration blob
- *
- * @return Zero when successful, otherwise an error code
- *
-  \code{.c}
-    // Example //
- 
-    // Allocate variables
-    uint8_t serialized_settings[BSEC_MAX_PROPERTY_BLOB_SIZE];
-    uint32_t n_serialized_settings_max = BSEC_MAX_PROPERTY_BLOB_SIZE;
-    uint8_t work_buffer[BSEC_MAX_PROPERTY_BLOB_SIZE];
-    uint32_t n_work_buffer = BSEC_MAX_PROPERTY_BLOB_SIZE;
-    uint32_t n_serialized_settings = 0;
-    
-    // Configuration of BSEC algorithm is stored in 'serialized_settings'
-    bsec_get_configuration(0, serialized_settings, n_serialized_settings_max, work_buffer, n_work_buffer, &n_serialized_settings);
-
-  \endcode
- */
-
-bsec_library_return_t bsec_get_configuration(const uint8_t config_id, uint8_t * serialized_settings, const uint32_t n_serialized_settings_max,
-                uint8_t * work_buffer, const uint32_t n_work_buffer, uint32_t * n_serialized_settings);
-
-
-/*!
- *@brief Retrieve the current internal library state
- *
- * BSEC allows to retrieve the current states of all signal processing modules and the BSEC module using 
- * bsec_get_state(). This allows a restart of the processing after a reboot of the system by calling bsec_set_state().
- * 
- * @note A work buffer with sufficient size is required and has to be provided by the function caller to decompose the 
- * serialization and apply it to the library and its modules. Please use #BSEC_MAX_STATE_BLOB_SIZE for allotting the 
- * required size.
- * 
- *
- * @param[in]       state_set_id                Identifier for a specific set of states to be returned; shall be
- *                                              zero to retrieve all states.
- * @param[out]      serialized_state            Buffer to hold the serialized config blob
- * @param[in]       n_serialized_state_max      Maximum available size for the serialized states
- * @param[in,out]   work_buffer                 Work buffer used to parse the blob
- * @param[in]       n_work_buffer               Length of the work buffer available for parsing the blob
- * @param[out]      n_serialized_state          Actual size of the returned serialized blob
- *
- * @return Zero when successful, otherwise an error code
- *
-  \code{.c}
-    // Example //
- 
-    // Allocate variables
-    uint8_t serialized_state[BSEC_MAX_STATE_BLOB_SIZE];
-    uint32_t n_serialized_state_max = BSEC_MAX_STATE_BLOB_SIZE;
-    uint32_t  n_serialized_state = BSEC_MAX_STATE_BLOB_SIZE;
-    uint8_t work_buffer_state[BSEC_MAX_STATE_BLOB_SIZE];
-    uint32_t  n_work_buffer_size = BSEC_MAX_STATE_BLOB_SIZE;
-    
-    // Algorithm state is stored in 'serialized_state'
-    bsec_get_state(0, serialized_state, n_serialized_state_max, work_buffer_state, n_work_buffer_size, &n_serialized_state);
-
-  \endcode
- */
-
-bsec_library_return_t bsec_get_state(const uint8_t state_set_id, uint8_t * serialized_state,
-                const uint32_t n_serialized_state_max, uint8_t * work_buffer, const uint32_t n_work_buffer,
-                uint32_t * n_serialized_state);
-
-/*!
- * @brief Retrieve BMExxx sensor instructions
- *
- * The bsec_sensor_control() interface is a key feature of BSEC, as it allows an easy way for the signal processing 
- * library to control the operation of the BME sensor. This is important since gas sensor behaviour is mainly 
- * determined by how the integrated heater is configured. To ensure an easy integration of BSEC into any system, 
- * bsec_sensor_control() will provide the caller with information about the current sensor configuration that is 
- * necessary to fulfill the input requirements derived from the current outputs requested via 
- * bsec_update_subscription().
- *
- * In practice the use of this function shall be as follows:
- * - Call bsec_sensor_control() which returns a bsec_bme_settings_t struct.
- * - Based on the information contained in this struct, the sensor is configured and a forced-mode measurement is 
- *   triggered if requested by bsec_sensor_control().
- * - Once this forced-mode measurement is complete, the signals specified in this struct shall be passed to 
- *   bsec_do_steps() to perform the signal processing.
- * - After processing, the process should sleep until the bsec_bme_settings_t::next_call timestamp is reached.
- *
- * 
- * @param [in]      time_stamp                Current timestamp in [ns]
- * @param[out]      sensor_settings           Settings to be passed to API to operate sensor at this time instance
- *
- * @return Zero when successful, otherwise an error code
- */
-
-bsec_library_return_t bsec_sensor_control(const int64_t time_stamp, bsec_bme_settings_t *sensor_settings);
-
-/*@}*/  //BSEC Interface
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* __BSEC_INTERFACE_H__ */

platformio.ini

@@ -31,6 +31,7 @@ halfile = generic.h
 ;halfile = octopus32.h
 ;halfile = tinypico.h
 ;halfile = tinypicomatrix.h
+;halfile = m5stack.h
 
 [platformio]
 ; upload firmware to board with usb cable
@@ -43,7 +44,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.9.85
+release_version = 1.9.89
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 3
@@ -56,13 +57,13 @@ monitor_speed = 115200
 upload_speed = 115200
 lib_deps_lora =
     ;MCCI LoRaWAN LMIC library@>=3.1.0 ; MCCI LMIC by Terrill Moore
-    https://github.com/mcci-catena/arduino-lmic.git#3ca90f3
+    https://github.com/mcci-catena/arduino-lmic.git#98a1b35
 lib_deps_display =
-    ss_oled@>=3.2.0 ; simple and small OLED lib by Larry Bank
+    ss_oled@3.3.0 ; simple and small OLED lib by Larry Bank
     BitBang_I2C@>=1.3.0
     QRCode@>=0.0.1
 lib_deps_matrix_display =
-    Ultrathin_LED_Matrix
+    Ultrathin_LED_Matrix@>=1.0.0
 lib_deps_rgbled =
     SmartLeds@>=1.1.6
 lib_deps_gps =
@@ -71,6 +72,7 @@ lib_deps_sensors =
     Adafruit Unified Sensor@>=1.1.1
     Adafruit BME280 Library@>=2.0.0
     Adafruit BMP085 Library@>=1.0.1
+    BSEC Software Library@1.5.1474
 lib_deps_basic =
     ArduinoJson@^5.13.1
     76@>=1.2.4 ; #76 Timezone by Jack Christensen

src/bmesensor.cpp

@@ -180,7 +180,7 @@ void bme_storedata(bmeStatus_t *bme_store) {
           iaqSensor.humidity;           // humidity in % relative humidity x1000
       bme_store->pressure =             // pressure in Pascal
           (iaqSensor.pressure / 100.0); // conversion Pa -> hPa
-      bme_store->iaq = iaqSensor.iaqEstimate;
+      bme_store->iaq = iaqSensor.iaq;
       bme_store->iaq_accuracy = iaqSensor.iaqAccuracy;
       bme_store->gas = iaqSensor.gasResistance; // gas resistance in ohms
       updateState();

src/display.cpp

@@ -78,9 +78,11 @@ void init_display(bool verbose) {
 
     // init display
 #ifndef DISPLAY_FLIP
-    oledInit(OLED_128x64, false, false, -1, -1, 400000L);
+    oledInit(OLED_128x64, false, false, -1, -1,
+             MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
 #else
-    oledInit(OLED_128x64, true, false, -1, -1, 400000L);
+    oledInit(OLED_128x64, true, false, -1, -1,
+             MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
 #endif
 
     // set display buffer
@@ -151,9 +153,11 @@ void init_display(bool verbose) {
 
 void refreshTheDisplay(bool nextPage) {
 
-  static uint8_t DisplayPage = 0;
+#ifndef HAS_BUTTON
+  static uint32_t framecounter = 0;
+#endif
 
-  // update histogram if we have a display
+  // update histogram
   oledPlotCurve(macs.size(), false);
 
   // if display is switched off we don't refresh it to relax cpu
@@ -173,12 +177,15 @@ void refreshTheDisplay(bool nextPage) {
       oledPower(cfg.screenon);
     }
 
-    if (nextPage) {
+#ifndef HAS_BUTTON
-      DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1);
+    // auto flip page if we are in unattended mode
-      oledFill(0, 1);
+    if ((++framecounter) > (DISPLAYCYCLE * 1000 / DISPLAYREFRESH_MS)) {
+      framecounter = 0;
+      nextPage = true;
     }
+#endif
 
-    draw_page(t, DisplayPage);
+    draw_page(t, nextPage);
     oledDumpBuffer(displaybuf);
 
     I2C_MUTEX_UNLOCK(); // release i2c bus access
@@ -198,8 +205,12 @@ void shutdown_display(void) {
   }
 }
 
-void draw_page(time_t t, uint8_t page) {
+void draw_page(time_t t, bool nextpage) {
 
+  // write display content to display buffer
+  // nextpage = true -> flip 1 page
+
+  static uint8_t DisplayPage = 0;
   char timeState;
 #if (HAS_GPS)
   static bool wasnofix = true;
@@ -209,7 +220,14 @@ void draw_page(time_t t, uint8_t page) {
   dp_printf(0, 0, FONT_STRETCHED, 0, "PAX:%-4d",
             macs.size()); // display number of unique macs total Wifi + BLE
 
-  switch (page % DISPLAY_PAGES) {
+start:
+
+  if (nextpage) {
+    DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1);
+    oledFill(0, 1);
+  }
+
+  switch (DisplayPage) {
 
     // page 0: parameters overview
     // page 1: pax graph
@@ -294,7 +312,6 @@ void draw_page(time_t t, uint8_t page) {
     dp_printf(102, 7, FONT_SMALL, !cfg.adrmode, "%-4s",
               getSfName(updr2rps(LMIC.datarate)));
 #endif     // HAS_LORA
-
     break; // page0
 
     // page 1: pax graph
@@ -323,16 +340,13 @@ void draw_page(time_t t, uint8_t page) {
       dp_printf(16, 5, FONT_STRETCHED, 1, "No fix");
       wasnofix = true;
     }
-
-#else
-    dp_printf(16, 5, FONT_STRETCHED, 1, "No GPS");
-#endif
-
     break; // page2
+#else
+    DisplayPage++; // next page
+#endif
 
     // page 3: BME280/680
   case 3:
-
 #if (HAS_BME)
     // line 2-3: Temp
     dp_printf(0, 2, FONT_STRETCHED, 0, "TMP:%-2.1f", bme_status.temperature);
@@ -346,29 +360,29 @@ void draw_page(time_t t, uint8_t page) {
 #else      // is BME280 or BMP180
     // line 6-7: Pre
     dp_printf(0, 6, FONT_STRETCHED, 0, "PRE:%-2.1f", bme_status.pressure);
-#endif // HAS_BME
+#endif     // HAS_BME680
-
-#else
-    dp_printf(16, 5, FONT_STRETCHED, 1, "No BME");
-#endif
-
     break; // page 3
+#else
+    DisplayPage++; // next page
+#endif // HAS_BME
 
   // page 4: time
   case 4:
-
     dp_printf(0, 4, FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t),
               second(t));
     break;
 
     // page 5: blank screen
   case 5:
-
+#ifdef HAS_BUTTON
     oledFill(0, 1);
     break;
+#else // don't show blank page if we are unattended
+    DisplayPage++; // next page
+#endif
 
   default:
-    break; // default
+    goto start; // start over
 
   } // switch
 

src/hal/heltecv2.h

@@ -43,7 +43,7 @@
 #define LORA_IRQ DIO0
 #define LORA_IO1 DIO1
 #define LORA_IO2 DIO2
-#define LORA_SCK SCK
+#define LORA_SCK GPIO_NUM_5
 #define LORA_MISO MISO
 #define LORA_MOSI MOSI
 #define LORA_RST RST_LoRa

src/hal/m5stack.h

@@ -0,0 +1,62 @@
+// clang-format off
+// upload_speed 921600
+// board M5Stack-Core-ESP32
+
+// EXPERIMENTAL VERSION - NOT TESTED ON M5 HARDWARE YET
+
+#ifndef _M5STACK_H
+#define _M5STACK_H
+
+#include <stdint.h>
+
+#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module
+
+// Pins for LORA chip SPI interface, reset line and interrupt lines
+#define LORA_SCK  SCK
+#define LORA_CS   SS
+#define LORA_MISO MISO
+#define LORA_MOSI MOSI
+#define LORA_RST  GPIO_NUM_36
+#define LORA_IRQ  GPIO_NUM_26
+#define LORA_IO1  GPIO_NUM_34 // must be externally wired on PCB!
+#define LORA_IO2  LMIC_UNUSED_PIN
+
+
+// enable only if you want to store a local paxcount table on the device
+#define HAS_SDCARD  1      // this board has an SD-card-reader/writer
+// Pins for SD-card
+#define SDCARD_CS    GPIO_NUM_4
+#define SDCARD_MOSI  MOSI
+#define SDCARD_MISO  MISO
+#define SDCARD_SCLK  SCK
+
+// user defined sensors
+//#define HAS_SENSORS 1 // comment out if device has user defined sensors
+
+#define CFG_sx1276_radio 1 // select LoRa chip
+#define BOARD_HAS_PSRAM // use if board has external PSRAM
+#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
+
+//#define HAS_DISPLAY 1
+//#define DISPLAY_FLIP  1 // use if display is rotated
+//#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
+//#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
+
+#define HAS_LED NOT_A_PIN // no on board LED (?)
+#define HAS_BUTTON (39) // on board button A
+
+// GPS settings
+#define HAS_GPS 1 // use on board GPS
+#define GPS_SERIAL 9600, SERIAL_8N1, RXD2, TXD2 // UBlox NEO 6M RX, TX
+#define GPS_INT GPIO_NUM_35 // 30ns accurary timepulse, to be external wired on pcb: shorten R12!
+
+// Pins for interface of LC Display
+#define MY_OLED_CS GPIO_NUM_14
+#define MY_OLED_DC GPIO_NUM_27
+#define MY_OLED_CLK GPIO_NUM_18
+#define MY_OLED_RST GPIO_NUM_33
+#define MY_OLED_BL GPIO_NUM_32
+#define MY_OLED_MOSI GPIO_NUM_23
+#define MY_OLED_MISO GPIO_NUM_23
+
+#endif

src/ota.cpp

@@ -44,10 +44,13 @@ void start_ota_update() {
 
 // init display
 #ifdef HAS_DISPLAY
+
 #ifndef DISPLAY_FLIP
-  oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L);
+    oledInit(OLED_128x64, false, false, -1, -1,
+             MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
 #else
-  oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L);
+    oledInit(OLED_128x64, true, false, -1, -1,
+             MY_OLED_RST == NOT_A_PIN ? -1 : MY_OLED_RST, 400000L);
 #endif
 
   // set display buffer

src/paxcounter.conf

@@ -57,6 +57,7 @@
 #define RGBLUMINOSITY                   30      // RGB LED luminosity [default = 30%]
 #define DISPLAYREFRESH_MS               40      // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second
 #define DISPLAYCONTRAST                 80      // 0 .. 255, OLED display contrast [default = 80]
+#define DISPLAYCYCLE                    3       // Auto page flip delay in sec [default = 2] for devices without button
 #define HOMECYCLE                       30      // house keeping cycle in seconds [default = 30 secs]
 
 // Settings for BME680 environmental sensor
@@ -76,7 +77,7 @@
 #define TIME_SYNC_INTERVAL_RETRY        10      // retry time sync after lost sync each .. minutes [default = 10], 0 means off
 #define TIME_SYNC_COMPILEDATE           0       // set to 1 to use compile date to initialize RTC after power outage [default = 0]
 #define TIME_SYNC_LORAWAN               0       // set to 1 to use LORA network as time source, 0 means off [default = 0]
-#define TIME_SYNC_LORASERVER            0       // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
+#define TIME_SYNC_LORASERVER            1       // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
 
 // settings for syncing time with timeserver applications
 #define TIME_SYNC_SAMPLES               1       // number of time requests for averaging
@@ -93,7 +94,7 @@
 #define RCMDPORT                        2       // remote commands
 #define STATUSPORT                      2       // remote command results
 #define CONFIGPORT                      3       // config query results
-#define GPSPORT                         4       // gps - set to 1 to send combined GPS+COUNTERPORT payload  
+#define GPSPORT                         1       // gps - set to 1 to send combined GPS+COUNTERPORT payload  
 #define BUTTONPORT                      5       // button pressed signal
 #define BEACONPORT                      6       // beacon alarms
 #define BMEPORT                         7       // BME680 sensor