update README.md
This commit is contained in:
parent
8fba63a53f
commit
b587a5604e
21
README.md
21
README.md
@ -311,7 +311,7 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
|
||||
Example for EU868:
|
||||
|
||||
DataRate Radio Bit/s
|
||||
DataRate Configuration Bit/s
|
||||
0 LoRa: SF12 / 125 kHz 250
|
||||
1 LoRa: SF11 / 125 kHz 440
|
||||
2 LoRa: SF10 / 125 kHz 980
|
||||
@ -320,20 +320,33 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
5 LoRa: SF7 / 125 kHz 5470
|
||||
6* LoRa: SF7 / 250 kHz 11000
|
||||
7* FSK: 50 kbps 50000
|
||||
8 .. 14 reserved for future use (RFU)
|
||||
15 ignored (device keeps current setting)
|
||||
|
||||
*) not supported by TheThingsNetwork
|
||||
|
||||
0x06 set LoRa TXpower
|
||||
|
||||
0 ... 15 [default: 14]
|
||||
0 ... 15 [default: 7]
|
||||
|
||||
TXPower Configuration
|
||||
0 Max EIRP (usually +16dB)
|
||||
1 -2dB
|
||||
2 -4dB
|
||||
3 -6dB
|
||||
4 -8dB
|
||||
5 -10dB
|
||||
6 -12dB
|
||||
7 -14dB
|
||||
8 .. 14 reserved for future use (RFU)
|
||||
15 ignored (device keeps current setting)
|
||||
|
||||
0x07 set LoRa Adaptive Data Rate mode
|
||||
|
||||
0 = ADR off
|
||||
1 = ADR on [default]
|
||||
|
||||
Note: set ADR to off, if device is moving, set to on, if not.
|
||||
If ADR is set to on, SF value is shown inverted on display.
|
||||
If ADR is set to off, SF value is shown inverted on display.
|
||||
|
||||
0x08 do nothing
|
||||
|
||||
|
@ -7,7 +7,7 @@
|
||||
|
||||
; ---> SELECT THE TARGET PLATFORM HERE! <---
|
||||
[board]
|
||||
halfile = generic.h
|
||||
;halfile = generic.h
|
||||
;halfile = ebox.h
|
||||
;halfile = eboxtube.h
|
||||
;halfile = ecopower.h
|
||||
@ -18,7 +18,7 @@ halfile = generic.h
|
||||
;halfile = ttgov21old.h
|
||||
;halfile = ttgov21new.h
|
||||
;halfile = ttgofox.h
|
||||
;halfile = ttgobeam.h
|
||||
halfile = ttgobeam.h
|
||||
;halfile = ttgobeam10.h
|
||||
;halfile = fipy.h
|
||||
;halfile = lopy.h
|
||||
@ -46,7 +46,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
|
||||
release_version = 1.8.3
|
||||
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
|
||||
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
|
||||
debug_level = 3
|
||||
debug_level = 4
|
||||
extra_scripts = pre:build.py
|
||||
otakeyfile = ota.conf
|
||||
lorakeyfile = loraconf.h
|
||||
|
@ -49,7 +49,7 @@
|
||||
#define RETRANSMIT_RCMD 5 // [seconds] wait time before retransmitting rcommand results
|
||||
#define PAYLOAD_BUFFER_SIZE 51 // maximum size of payload block per transmit
|
||||
#define LORADRDEFAULT 5 // 0 .. 15, LoRaWAN datarate, according to regional LoRaWAN specs [default = 5]
|
||||
#define LORATXPOWDEFAULT 14 // 0 .. 15, LoRaWAN TX power
|
||||
#define LORATXPOWDEFAULT 7 // 0 .. 15, LoRaWAN TX power [default = 7]
|
||||
#define MAXLORARETRY 500 // maximum count of TX retries if LoRa busy
|
||||
#define SEND_QUEUE_SIZE 10 // maximum number of messages in payload send queue [1 = no queue]
|
||||
|
||||
@ -75,7 +75,7 @@
|
||||
#define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off
|
||||
#define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0]
|
||||
#define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0]
|
||||
#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
|
||||
#define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
|
||||
|
||||
// settings for syncing time with timeserver applications
|
||||
#define TIME_SYNC_SAMPLES 1 // number of time requests for averaging
|
||||
|
Loading…
Reference in New Issue
Block a user