new rcommand 0x88 set_time

This commit is contained in:
cyberman54 2021-03-27 18:07:30 +01:00
parent fcf2e4f59a
commit b5314f1288
2 changed files with 30 additions and 19 deletions

View File

@ -579,10 +579,13 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
0x01 = timeNeedsSync (last sync failed)
0x02 = timeSet (synched)
0x87 set time/date
0x87 sync time/date
Device synchronizes it's time/date by calling the preconfigured time source.
0x88 set time/date
bytes 1..4 = time/date to set in UTC epoch seconds (LSB, e.g. https://www.epochconverter.com/hex)
# License

View File

@ -21,7 +21,8 @@ void set_reset(uint8_t val[]) {
reset_counters(); // clear macs
break;
case 2: // reset device to factory settings
ESP_LOGI(TAG, "Remote command: reset device to factory settings and restart");
ESP_LOGI(TAG,
"Remote command: reset device to factory settings and restart");
eraseConfig();
do_reset(false);
break;
@ -74,7 +75,7 @@ void set_sleepcycle(uint8_t val[]) {
void set_wifichancycle(uint8_t val[]) {
cfg.wifichancycle = val[0];
#ifndef LIBAPX
#ifndef LIBAPX
// update Wifi channel rotation timer period
if (cfg.wifichancycle > 0) {
if (xTimerIsTimerActive(WifiChanTimer) == pdFALSE)
@ -91,14 +92,14 @@ void set_wifichancycle(uint8_t val[]) {
channel = WIFI_CHANNEL_MIN;
ESP_LOGI(TAG, "Remote command: set Wifi channel hopping to off");
}
#else
// TODO update libpax configuration
#endif
#else
// TODO update libpax configuration
#endif
}
void set_blescantime(uint8_t val[]) {
cfg.blescantime = val[0];
#if !(LIBPAX)
#if !(LIBPAX)
ESP_LOGI(TAG, "Remote command: set BLE scan time to %.1f seconds",
cfg.blescantime / float(100));
// stop & restart BLE scan task to apply new parameter
@ -106,9 +107,9 @@ void set_blescantime(uint8_t val[]) {
stop_BLEscan();
start_BLEscan();
}
#else
#else
// TODO update libpax configuration
#endif
#endif
}
void set_countmode(uint8_t val[]) {
@ -251,37 +252,37 @@ void set_loraadr(uint8_t val[]) {
void set_blescan(uint8_t val[]) {
ESP_LOGI(TAG, "Remote command: set BLE scanner to %s", val[0] ? "on" : "off");
cfg.blescan = val[0] ? 1 : 0;
#if !(LIBPAX)
#if !(LIBPAX)
macs_ble = 0; // clear BLE counter
if (cfg.blescan)
start_BLEscan();
else
stop_BLEscan();
#else
#else
libpax_counter_stop();
libpax_config_t current_config;
libpax_get_current_config(&current_config);
current_config.blecounter = cfg.blescan;
libpax_update_config(&current_config);
init_libpax();
#endif
#endif
}
void set_wifiscan(uint8_t val[]) {
ESP_LOGI(TAG, "Remote command: set WIFI scanner to %s",
val[0] ? "on" : "off");
cfg.wifiscan = val[0] ? 1 : 0;
#if !(LIBPAX)
#if !(LIBPAX)
macs_wifi = 0; // clear WIFI counter
switch_wifi_sniffer(cfg.wifiscan);
#else
#else
libpax_counter_stop();
libpax_config_t current_config;
libpax_get_current_config(&current_config);
current_config.wificounter = cfg.wifiscan;
libpax_update_config(&current_config);
init_libpax();
#endif
#endif
}
void set_wifiant(uint8_t val[]) {
@ -381,11 +382,18 @@ void get_time(uint8_t val[]) {
SendPayload(TIMEPORT);
};
void set_time(uint8_t val[]) {
void set_timesync(uint8_t val[]) {
ESP_LOGI(TAG, "Remote command: timesync requested");
setTimeSyncIRQ();
};
void set_time(uint8_t val[]) {
// swap byte order from msb to lsb, note: this is a platform dependent hack
uint32_t t = __builtin_bswap32(*(uint32_t *)(val));
ESP_LOGI(TAG, "Remote command: set time to %d", t);
setMyTime(t, 0, _unsynced);
};
void set_flush(uint8_t val[]) {
ESP_LOGI(TAG, "Remote command: flush");
// does nothing
@ -431,8 +439,8 @@ static const cmd_t table[] = {
{0x21, set_saveconfig, 0}, {0x80, get_config, 0},
{0x81, get_status, 0}, {0x83, get_batt, 0},
{0x84, get_gps, 0}, {0x85, get_bme, 0},
{0x86, get_time, 0}, {0x87, set_time, 0},
{0x99, set_flush, 0}};
{0x86, get_time, 0}, {0x87, set_timesync, 0},
{0x88, set_time, 4}, {0x99, set_flush, 0}};
static const uint8_t cmdtablesize =
sizeof(table) / sizeof(table[0]); // number of commands in command table