DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ttgov2.h updated

Browse Source
This commit is contained in:
Klaus K Wilting 2018-07-18 15:28:53 +02:00
parent 8f93fc1f82
commit b30c18bad1
1 changed files with 23 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
src/hal/ttgov2.h
View File

@ -28,26 +28,29 @@
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO21 -- SD1306 D1+D2
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO22 -- SD1306 D0
/* source:
https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-2/11973
/*
ESP32 LoRa module (SPI) OLED display (I2C)
--------- ----------------- ------------------
5 SCK SCK
27 MOSI MOSI
19 MISO MISO
18 SS NSS
14 RST
26 DIO0
33 DIO1 (see note {1})
32 DIO2 (see note {2})
22 SCL SCL
21 SDA SDA
22 LED (useless, see note {3})
TTGO LoRa32 V2:
ESP32 LoRa (SPI) Display (I2C) LED
----------- ---------- ------------- ------------------
GPIO5 SCK SCK
GPIO27 MOSI MOSI
GPIO19 MISO MISO
GPIO18 SS NSS
EN RST RST
GPIO26 DIO0
GPIO33 DIO1 (see #1)
GPIO32 DIO2 (see #2)
GPIO22 SCL SCL
GPIO21 SDA SDA
GPIO22 useless (see #3)
{1} Must be wired externally!
DIO1 is connected to a separate pin on pcb, but is not connected to GPIO33.
Solder a wire from pcb pin labeled "LORA_IRQ" to pin "GPIO33" (see TTGO V2.0 pinout).
{2} Is not wired, but not needed for LoRa.
{3} The on-board LED is wired to SCL (used by display) therefore totally useless!
*/
#1 Required (used by LMIC for LoRa).
Not on-board wired to any GPIO. Must be manually wired. <<-- necessary for paxcounter
#2 Optional (used by LMIC for FSK but not for LoRa). <<-- NOT necessary for paxcounter
Not on-board wired to any GPIO. When needed: must be manually wired.
#3 GPIO22 is already used for SCL therefore LED cannot be used without conflicting with I2C and display.
*/