Merge pull request #488 from cyberman54/development

GPS combined payload compile option added

README.md

@@ -169,17 +169,18 @@ Output of user sensor data can be switched by user remote control command 0x14 s
 
 Output of sensor and peripheral data is internally switched by a bitmask register. Default mask can be tailored by editing *cfg.payloadmask* initialization value in [*configmanager.cpp*](src/configmanager.cpp) following this scheme:
 
-| Bit | Sensordata    |
-| --- | ------------- |
-| 0   | GPS           |
-| 1   | Beacon alarm  |
-| 2   | BME280/680    |
-| 3   | Paxcounter    |
-| 4   | User sensor 1 |
-| 5   | User sensor 2 |
-| 6   | User sensor 3 |
-| 7   | Batterylevel  |
+| Bit | Sensordata    | Default
+| --- | ------------- | -------
+| 0   | GPS           | off*
+| 1   | Beacon alarm  | on
+| 2   | BME280/680    | on
+| 3   | Paxcounter    | on
+| 4   | User sensor 1 | on
+| 5   | User sensor 2 | on
+| 6   | User sensor 3 | on
+| 7   | Batterylevel  | off
 
+*) GPS data can also be combined with payload on port 1, #define PAYLOAD_GPS in paxcounter.conf to enable
 
 # Time sync
 

platformio.ini

@@ -18,7 +18,7 @@ halfile = generic.h
 ;halfile = ttgov21old.h
 ;halfile = ttgov21new.h
 ;halfile = ttgofox.h
-;halfile = ttgobeam.h
+halfile = ttgobeam.h
 ;halfile = ttgobeam10.h
 ;halfile = fipy.h
 ;halfile = lopy.h
@@ -46,7 +46,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 release_version = 1.9.81
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
-debug_level = 3
+debug_level = 4
 extra_scripts = pre:build.py
 otakeyfile = ota.conf
 lorakeyfile = loraconf.h

src/configmanager.cpp

@@ -9,9 +9,9 @@ nvs_handle my_handle;
 esp_err_t err;
 
 #define PAYLOADMASK                                                            \
-  ((GPS_DATA | ALARM_DATA | MEMS_DATA | COUNT_DATA | SENSOR1_DATA |            \
-    SENSOR2_DATA | SENSOR3_DATA) &                                             \
-   ~BATT_DATA)
+  ((ALARM_DATA | MEMS_DATA | COUNT_DATA | SENSOR1_DATA | SENSOR2_DATA |        \
+    SENSOR3_DATA) &                                                            \
+   (~BATT_DATA) & (~GPS_DATA))
 
 // populate cfg vars with factory settings
 void defaultConfig() {

src/paxcounter.conf

@@ -13,6 +13,7 @@
 #define SENDCYCLE                       30      // payload send cycle [seconds/2], 0 .. 255
 #define PAYLOAD_ENCODER                 2       // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
 #define COUNTERMODE                     0       // 0=cyclic, 1=cumulative, 2=cyclic confirmed
+#define PAYLOAD_GPS                     1       // add gps location to pax count payload: 0=no, 1=yes
 
 // Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting
 #define VENDORFILTER                    1       // set to 0 if you want to count things, not people

src/senddata.cpp

@@ -65,9 +65,21 @@ void sendData() {
 #if ((WIFICOUNTER) || (BLECOUNTER))
     case COUNT_DATA:
       payload.reset();
-      payload.addCount(macs_wifi, MAC_SNIFF_WIFI);
+      if (cfg.wifiscan)
+        payload.addCount(macs_wifi, MAC_SNIFF_WIFI);
       if (cfg.blescan)
         payload.addCount(macs_ble, MAC_SNIFF_BLE);
+
+#if (PAYLOAD_GPS)
+      // send GPS position only if we have a fix
+      if (gps.location.isValid()) {
+        gpsStatus_t gps_status;
+        gps_storelocation(&gps_status);
+        payload.addGPS(gps_status);
+      } else
+        ESP_LOGD(TAG, "No valid GPS position");
+#endif
+
       SendPayload(COUNTERPORT, prio_normal);
       // clear counter if not in cumulative counter mode
       if (cfg.countermode != 1) {